| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Also remove the SIMPLE_STRNLEN, which is not used anywhere.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
|
|
Previous implementation was adjusting length (rsi) to match
bytes (eax), but since there is no bound to length this can cause
overflow.
Fix is to just convert the byte-count (eax) to length by dividing by
sizeof (wchar_t) before the comparison.
Full check passes on x86-64 and build succeeds w/ and w/o multiarch.
|
|
This patch adds more overflow test coverage for strnlen and wcsnlen.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
In most cases the simple/stupid/builtin functions were in there to
benchmark optimized implementations against. Only in some cases the
functions are used to check expected results.
Remove these tests from IMPL() and only keep them in wherever they're
used for a specific purpose, e.g. to generate expected results.
This improves timing of `make subdirs=string` by over a minute and a
half (over 15%) on a Whiskey Lake laptop.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Noah Goldstein <libc-alpha@sourceware.org>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
No bug. Just seem like relevant cases given that strnlen will
use s + maxlen in many implementations.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
This commit adds tests for a bug in the wide char variant of the
functions where the implementation may assume that maxlen for wcsnlen
or n for wmemchr/strncat will not overflow when multiplied by
sizeof(wchar_t).
These tests show the following implementations failing on x86_64:
wcsnlen-sse4_1
wcsnlen-avx2
wmemchr-sse2
wmemchr-avx2
strncat would fail as well if it where on a system that prefered
either of the wcsnlen implementations that failed as it relies on
wcsnlen.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
This patch covers the following condition:
Strings start with different alignments and end with length less than or
equal to 512 byte.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Place strings ending at page boundary without the null byte. If an
implementation goes beyond EXP_LEN, it will trigger the segfault.
|
|
Use wmemset to initialize wchar_t string.
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
May be tricky for otimized implementations to handle strings around
page boundary once, for instance, it is performed unaligned loads or
when maxlen is used as a hint for vectorized loops. The test cases
should unveil regression bugs on these cases.
To some extend do_random_tests in string/test-strnlen tests strings
placed at page end but it does not cover all cases. So this change
adds tests which consists of placing strings of varying sizes ending
at the page boundary. It also combines with different values of maxlen.
Tested on ppc64le and x86_64.
* string/test-strnlen.c (do_page_tests): New function
to check length of strings ending at the page boundary.
(test_main): Added call to the do_page_tests function.
|
|
Replaced all imports of test-skeleton.c with support/test-driver.c.
In some cases it was needed to adjust do_test to return int
instead of static int since that is the method's signature expected by
test-driver.c.
Checked on x86_64.
* string/test-string.h (TEST_FUNCTION): Use test_main instead of
test_main ().
(CMDLINE_PROCESS): Use function instead of defined macro.
* debug/test-strcpy_chk.c: Import support/test-driver.c and also
<suppport/support.h> to use set_fortify_handler().
* string/bug-envz1.c: Import support/test-driver.c instead of
test-skeleton.c.
* string/bug-strcoll2.c: Likewise.
* string/bug-strtok1.c: Likewise.
* string/stratcliff.c: Likewise.
* string/test-ffs.c: Likewise.
* string/test-memccpy.c: Likewise.
* string/test-memchr.c: Likewise.
* string/test-memcmp.c: Likewise.
* string/test-memcpy.c: Likewise.
* string/test-memmem.c: Likewise.
* string/test-memmove.c: Likewise.
* string/test-memrchr.c: Likewise.
* string/test-memset.c: Likewise.
* string/test-rawmemchr.c: Likewise.
* string/test-strcasecmp.c: Likewise.
* string/test-strcasestr.c: Likewise.
* string/test-strcat.c: Likewise.
* string/test-strchr.c: Likewise.
* string/test-strcmp.c: Likewise.
* string/test-strcpy.c: Likewise.
* string/test-string.h: Likewise.
* string/test-strlen.c: Likewise.
* string/test-strncasecmp.c: Likewise.
* string/test-strncat.c: Likewise.
* string/test-strncmp.c: Likewise.
* string/test-strncpy.c: Likewise.
* string/test-strnlen.c: Likewise.
* string/test-strpbrk.c: Likewise.
* string/test-strrchr.c: Likewise.
* string/test-strspn.c: Likewise.
* string/test-strstr.c: Likewise.
* string/tst-bswap.c: Likewise.
* string/tst-cmp.c: Likewise.
* string/tst-endian.c: Likewise.
* string/tst-inlcall.c: Likewise.
* string/tst-strcoll-overflow.c: Likewise.
* string/tst-strfry.c: Likewise.
* string/tst-strlen.c: Likewise.
* string/tst-strtok.c: Likewise.
* string/tst-strtok_r.c: Likewise.
* string/tst-strxfrm.c: Likewise.
* string/tst-strxfrm2.c: Likewise.
* string/tst-svc.c: Likewise.
* string/tst-svc2.c: Likewise.
|
|
|
|
|
|
This patch provides optimized versions of strnlen and wcsnlen with the z13
vector instructions.
ChangeLog:
* sysdeps/s390/multiarch/strnlen-c.c: New File.
* sysdeps/s390/multiarch/strnlen-vx.S: Likewise.
* sysdeps/s390/multiarch/strnlen.c: Likewise.
* sysdeps/s390/multiarch/wcsnlen-c.c: Likewise.
* sysdeps/s390/multiarch/wcsnlen-vx.S: Likewise.
* sysdeps/s390/multiarch/wcsnlen.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add strnlen and
wcsnlen functions.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc test for strnlen, wcsnlen.
* wcsmbs/wcsnlen.c: Use WCSNLEN if defined.
* string/test-strnlen.c: Add wcsnlen support.
* wcsmbs/test-wcsnlen.c: New File.
* wcsmbs/Makefile (strop-tests): Add wcsnlen.
* benchtests/bench-strnlen.c: Add wcsnlen support.
* benchtests/bench-wcsnlen.c: New File.
* benchtests/Makefile (wcsmbs-bench): Add wcsnlen.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
While at it, beef up the test suite for strnlen and add performance
tests for it, too.
|
