diff options
-rw-r--r-- | ChangeLog | 3 | ||||
-rw-r--r-- | iconvdata/iso-2022-jp.c | 276 |
2 files changed, 159 insertions, 120 deletions
@@ -1,5 +1,8 @@ 1999-01-16 Ulrich Drepper <drepper@cygnus.com> + * iconvdata/iso-2022-jp.c: Correct handling of G2 set. + Patch by Shinya Hanataka <hanataka@abyss.rim.or.jp>. + * elf/Makefile (tests): Add loadtest. Add rules to generate test modules. * Makeconfig (+link): Add $(LDFLAGS-$(@F)) to command line. diff --git a/iconvdata/iso-2022-jp.c b/iconvdata/iso-2022-jp.c index a7ec09b32d..10515d2dee 100644 --- a/iconvdata/iso-2022-jp.c +++ b/iconvdata/iso-2022-jp.c @@ -95,7 +95,14 @@ enum JISX0201_Kana_set, GB2312_set, KSC5601_set, - JISX0212_set, + JISX0212_set +}; + +/* The second value stored is the designation of the G2 set. The following + values are possible: */ +enum +{ + UNSPECIFIED_set = 0, ISO88591_set, ISO88597_set }; @@ -187,12 +194,13 @@ gconv_end (struct gconv_step *data) \ if (dir == from_iso2022jp) \ /* It's easy, we don't have to emit anything, we just reset the \ - state for the input. */ \ + state for the input. Note that this also clears the G2 \ + designation. */ \ data->statep->count = ASCII_set; \ else \ { \ char *outbuf = data->outbuf; \ - \ + \ /* We are not in the initial state. To switch back we have \ to emit the sequence `Esc ( B'. */ \ if (outbuf + 3 > data->outbufend) \ @@ -205,6 +213,7 @@ gconv_end (struct gconv_step *data) *outbuf++ = '('; \ *outbuf++ = 'B'; \ data->outbuf = outbuf; \ + /* Note that this also clears the G2 designation. */ \ data->statep->count = ASCII_set; \ } \ } \ @@ -319,23 +328,50 @@ gconv_end (struct gconv_step *data) if (inptr[2] == 'A') \ { \ /* ISO 8859-1-GR selected. */ \ - set = ISO88591_set; \ + set2 = ISO88591_set; \ inptr += 3; \ continue; \ } \ else if (inptr[2] == 'F') \ { \ /* ISO 8859-7-GR selected. */ \ - set = ISO88597_set; \ + set2 = ISO88597_set; \ inptr += 3; \ continue; \ } \ } \ } \ \ - if (set == ASCII_set \ - || (var < ISO88591_set && (ch < 0x21 || ch == 0x7f)) \ - || (var >= ISO88591_set && ch < 0x20)) \ + if (ch == ESC && var == iso2022jp2 && inptr[1] == 'N') \ + { \ + if (set2 == ISO88591_set) \ + { \ + ch = inptr[2] | 0x80; \ + inptr += 3; \ + } \ + else if (set2 == ISO88597_set) \ + { \ + /* We use the table from the ISO 8859-7 module. */ \ + if (inptr[2] < 0x20 || inptr[2] > 0x80) \ + { \ + result = GCONV_ILLEGAL_INPUT; \ + break; \ + } \ + ch = iso88597_to_ucs4[inptr[2] - 0x20]; \ + if (ch == 0) \ + { \ + result = GCONV_ILLEGAL_INPUT; \ + break; \ + } \ + inptr += 3; \ + } \ + else \ + { \ + result = GCONV_ILLEGAL_INPUT; \ + break; \ + } \ + } \ + else if (set == ASCII_set || (ch < 0x21 || ch == 0x7f)) \ /* Almost done, just advance the input pointer. */ \ ++inptr; \ else if (set == JISX0201_Roman_set) \ @@ -360,24 +396,6 @@ gconv_end (struct gconv_step *data) } \ ++inptr; \ } \ - else if (set == ISO88591_set) \ - { \ - /* This is quite easy. All characters are defined and the \ - ISO 10646 value is computed by adding 0x80. */ \ - ch |= 0x80; \ - ++inptr; \ - } \ - else if (set == ISO88597_set) \ - { \ - /* We use the table from the ISO 8859-7 module. */ \ - ch = iso88597_to_ucs4[(ch & 0x7f) - 0x20]; \ - if (ch == 0) \ - { \ - result = GCONV_ILLEGAL_INPUT; \ - break; \ - } \ - ++inptr; \ - } \ else \ { \ if (set == JISX0208_1978_set || set == JISX0208_1983_set) \ @@ -419,8 +437,8 @@ gconv_end (struct gconv_step *data) *((uint32_t *) outptr)++ = ch; \ } #define EXTRA_LOOP_DECLS , enum variant var, int *setp -#define INIT_PARAMS int set = *setp -#define UPDATE_PARAMS *setp = set +#define INIT_PARAMS int set = *setp % 0x100, set2 = *setp / 0x100 +#define UPDATE_PARAMS *setp = (set2 << 8) + set #include <iconv/loop.c> @@ -448,6 +466,9 @@ gconv_end (struct gconv_step *data) *outptr++ = ch; \ written = 1; \ } \ + /* At the beginning of a line, G2 designation is cleared. */ \ + if (var == iso2022jp2 && ch == 0x0a) \ + set2 = UNSPECIFIED_set; \ } \ else if (set == JISX0201_Roman_set) \ { \ @@ -473,30 +494,6 @@ gconv_end (struct gconv_step *data) else \ written = UNKNOWN_10646_CHAR; \ } \ - else if (set == ISO88591_set) \ - { \ - if (ch >= 0x80 && ch <= 0xff) \ - { \ - *outptr++ = ch; \ - written = 1; \ - } \ - } \ - else if (set == ISO88597_set) \ - { \ - const struct gap *rp = from_idx; \ - \ - while (ch > rp->end) \ - ++rp; \ - if (ch >= rp->start) \ - { \ - unsigned char res = iso88597_from_ucs4[ch + rp->idx]; \ - if (res != '\0') \ - { \ - *outptr++ = res | 0x80; \ - written = 1; \ - } \ - } \ - } \ else \ { \ if (set == JISX0208_1978_set || set == JISX0208_1983_set) \ @@ -530,6 +527,38 @@ gconv_end (struct gconv_step *data) \ if (written == UNKNOWN_10646_CHAR || written == 0) \ { \ + if (set2 == ISO88591_set) \ + { \ + if (ch >= 0x80 && ch <= 0xff) \ + { \ + *outptr++ = ESC; \ + *outptr++ = 'N'; \ + *outptr++ = ch & 0x7f; \ + written = 3; \ + } \ + } \ + else if (set2 == ISO88597_set) \ + { \ + const struct gap *rp = from_idx; \ + \ + while (ch > rp->end) \ + ++rp; \ + if (ch >= rp->start) \ + { \ + unsigned char res = iso88597_from_ucs4[ch - 0xa0 + rp->idx]; \ + if (res != '\0') \ + { \ + *outptr++ = ESC; \ + *outptr++ = 'N'; \ + *outptr++ = res; \ + written = 3; \ + } \ + } \ + } \ + } \ + \ + if (written == UNKNOWN_10646_CHAR || written == 0) \ + { \ /* Either this is an unknown character or we have to switch \ the currently selected character set. The character sets \ do not code entirely separate parts of ISO 10646 and \ @@ -541,31 +570,25 @@ gconv_end (struct gconv_step *data) later and now simply use a fixed order in which we test for \ availability */ \ \ - /* First test whether we have at least three more bytes for \ - the escape sequence. The two charsets which require four \ - bytes will be handled later. */ \ - if (NEED_LENGTH_TEST && outptr + 3 > outend) \ - { \ - result = GCONV_FULL_OUTPUT; \ - break; \ - } \ - \ if (ch <= 0x7f) \ { \ /* We must encode using ASCII. First write out the \ escape sequence. */ \ - *outptr++ = ESC; \ - *outptr++ = '('; \ - *outptr++ = 'B'; \ - set = ASCII_set; \ - \ - if (NEED_LENGTH_TEST && outptr == outend) \ + if (NEED_LENGTH_TEST && outptr + 4 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '('; \ + *outptr++ = 'B'; \ + set = ASCII_set; \ *outptr++ = ch; \ + \ + /* At the beginning of a line, G2 designation is cleared. */ \ + if (var == iso2022jp2 && ch == 0x0a) \ + set2 = UNSPECIFIED_set; \ } \ else \ { \ @@ -580,17 +603,16 @@ gconv_end (struct gconv_step *data) if (written != UNKNOWN_10646_CHAR && buf[0] < 0x80) \ { \ /* We use JIS X 0201. */ \ - *outptr++ = ESC; \ - *outptr++ = '('; \ - *outptr++ = 'J'; \ - set = JISX0201_Roman_set; \ - \ - if (NEED_LENGTH_TEST && outptr == outend) \ + if (NEED_LENGTH_TEST && outptr + 4 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '('; \ + *outptr++ = 'J'; \ + set = JISX0201_Roman_set; \ *outptr++ = buf[0]; \ } \ else \ @@ -599,17 +621,16 @@ gconv_end (struct gconv_step *data) if (written != UNKNOWN_10646_CHAR) \ { \ /* We use JIS X 0208. */ \ - *outptr++ = ESC; \ - *outptr++ = '$'; \ - *outptr++ = 'B'; \ - set = JISX0208_1983_set; \ - \ - if (NEED_LENGTH_TEST && outptr + 2 > outend) \ + if (NEED_LENGTH_TEST && outptr + 5 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '$'; \ + *outptr++ = 'B'; \ + set = JISX0208_1983_set; \ *outptr++ = buf[0]; \ *outptr++ = buf[1]; \ } \ @@ -625,7 +646,7 @@ gconv_end (struct gconv_step *data) if (written != UNKNOWN_10646_CHAR) \ { \ /* We use JIS X 0212. */ \ - if (NEED_LENGTH_TEST && outptr + 4 > outend) \ + if (NEED_LENGTH_TEST && outptr + 6 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ @@ -635,13 +656,6 @@ gconv_end (struct gconv_step *data) *outptr++ = '('; \ *outptr++ = 'D'; \ set = JISX0212_set; \ - \ - if (NEED_LENGTH_TEST && outptr + 2 > outend) \ - { \ - result = GCONV_FULL_OUTPUT; \ - break; \ - } \ - \ *outptr++ = buf[0]; \ *outptr++ = buf[1]; \ } \ @@ -651,33 +665,33 @@ gconv_end (struct gconv_step *data) if (written != UNKNOWN_10646_CHAR && buf[0] >= 0x80) \ { \ /* We use JIS X 0201. */ \ - *outptr++ = ESC; \ - *outptr++ = '('; \ - *outptr++ = 'I'; \ - set = JISX0201_Kana_set; \ - \ - if (NEED_LENGTH_TEST && outptr == outend) \ + if (NEED_LENGTH_TEST && outptr + 4 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '('; \ + *outptr++ = 'I'; \ + set = JISX0201_Kana_set; \ *outptr++ = buf[0] - 0x80; \ } \ else if (ch != 0xa5 && ch >= 0x80 && ch <= 0xff) \ { \ /* ISO 8859-1 upper half. */ \ - *outptr++ = ESC; \ - *outptr++ = '.'; \ - *outptr++ = 'A'; \ - set = ISO88591_set; \ - \ - if (NEED_LENGTH_TEST && outptr == outend) \ + if (NEED_LENGTH_TEST && outptr + 6 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '.'; \ + *outptr++ = 'A'; \ + set2 = ISO88591_set; \ + *outptr++ = ESC; \ + *outptr++ = 'N'; \ *outptr++ = ch; \ } \ else \ @@ -686,28 +700,27 @@ gconv_end (struct gconv_step *data) if (written != UNKNOWN_10646_CHAR) \ { \ /* We use GB 2312. */ \ - *outptr++ = ESC; \ - *outptr++ = '$'; \ - *outptr++ = 'A'; \ - set = GB2312_set; \ - \ - if (NEED_LENGTH_TEST && outptr + 2 > outend) \ + if (NEED_LENGTH_TEST && outptr + 5 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ } \ \ + *outptr++ = ESC; \ + *outptr++ = '$'; \ + *outptr++ = 'A'; \ + set = GB2312_set; \ *outptr++ = buf[0]; \ *outptr++ = buf[1]; \ } \ else \ { \ - written = ucs4_to_ksc5601 (ch, buf, 2); \ + written = ucs4_to_ksc5601 (ch, buf, 2); \ if (written != UNKNOWN_10646_CHAR) \ { \ /* We use KSC 5601. */ \ - if (NEED_LENGTH_TEST \ - && outptr + 4 > outend) \ + if (NEED_LENGTH_TEST \ + && outptr + 6 > outend) \ { \ result = GCONV_FULL_OUTPUT; \ break; \ @@ -717,21 +730,44 @@ gconv_end (struct gconv_step *data) *outptr++ = '('; \ *outptr++ = 'C'; \ set = KSC5601_set; \ - \ - if (NEED_LENGTH_TEST \ - && outptr + 2 > outend) \ - { \ - result = GCONV_FULL_OUTPUT; \ - break; \ - } \ - \ *outptr++ = buf[0]; \ *outptr++ = buf[1]; \ } \ else \ { \ - result = GCONV_ILLEGAL_INPUT; \ - break; \ + const struct gap *rp = from_idx; \ + unsigned char gch = 0; \ + \ + while (ch > rp->end) \ + ++rp; \ + if (ch >= rp->start) \ + { \ + ch = ch - 0xa0 + rp->idx; \ + gch = iso88597_from_ucs4[ch]; \ + } \ + \ + if (gch != 0) \ + { \ + /* We use ISO 8859-7 greek. */ \ + if (NEED_LENGTH_TEST \ + && outptr + 6 > outend) \ + { \ + result = GCONV_FULL_OUTPUT; \ + break; \ + } \ + *outptr++ = ESC; \ + *outptr++ = '.'; \ + *outptr++ = 'F'; \ + set2 = ISO88597_set; \ + *outptr++ = ESC; \ + *outptr++ = 'N'; \ + *outptr++ = gch; \ + } \ + else \ + { \ + result = GCONV_ILLEGAL_INPUT; \ + break; \ + } \ } \ } \ } \ @@ -745,8 +781,8 @@ gconv_end (struct gconv_step *data) inptr += 4; \ } #define EXTRA_LOOP_DECLS , enum variant var, int *setp -#define INIT_PARAMS int set = *setp -#define UPDATE_PARAMS *setp = set +#define INIT_PARAMS int set = *setp % 0x100, set2 = *setp / 0x100 +#define UPDATE_PARAMS *setp = (set2 << 8) + set #include <iconv/loop.c> |