Remove IA-64 support

1 files changed, 0 insertions, 251 deletions

diff --git a/sysdeps/ia64/memmove.S b/sysdeps/ia64/memmove.S
deleted file mode 100644
index 7b8c86b324..0000000000
--- a/sysdeps/ia64/memmove.S
+++ /dev/null
@@ -1,251 +0,0 @@
-/* Optimized version of the standard memmove() function.
-   This file is part of the GNU C Library.
-   Copyright (C) 2000, 2001, 2003 Free Software Foundation, Inc.
-   Contributed by Dan Pop <Dan.Pop@cern.ch>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-/* Return: dest
-
-   Inputs:
-        in0:    dest
-        in1:    src
-        in2:    byte count
-
-   The core of the function is the memcpy implementation used in memcpy.S.
-   When bytes have to be copied backwards, only the easy case, when
-   all arguments are multiples of 8, is optimised.
-
-   In this form, it assumes little endian mode.  For big endian mode,
-   sh1 must be computed using an extra instruction: sub sh1 = 64, sh1
-   or the UM.be bit should be cleared at the beginning and set at the end.  */
-
-#include <sysdep.h>
-#undef ret
-
-#define OP_T_THRES 	16
-#define OPSIZ 		 8
-
-#define adest		r15
-#define saved_pr	r17
-#define saved_lc	r18
-#define dest		r19
-#define src		r20
-#define len		r21
-#define asrc		r22
-#define tmp2		r23
-#define tmp3		r24
-#define	tmp4		r25
-#define ptable		r26
-#define ploop56		r27
-#define	loopaddr	r28
-#define	sh1		r29
-#define loopcnt		r30
-#define	value		r31
-
-#ifdef GAS_ALIGN_BREAKS_UNWIND_INFO
-# define ALIGN(n)	{ nop 0 }
-#else
-# define ALIGN(n)	.align n
-#endif
-
-#define LOOP(shift)							\
-		ALIGN(32);						\
-.loop##shift##:								\
-(p[0])		ld8	r[0] = [asrc], 8 ;	/* w1 */		\
-(p[MEMLAT+1])	st8	[dest] = value, 8 ;				\
-(p[MEMLAT])	shrp	value = r[MEMLAT], r[MEMLAT+1], shift ;		\
-		nop.b	0 ;						\
-		nop.b	0 ;						\
-		br.ctop.sptk .loop##shift ;				\
-		br.cond.sptk .cpyfew ; /* deal with the remaining bytes */
-
-#define MEMLAT	21
-#define Nrot	(((2*MEMLAT+3) + 7) & ~7)
-
-ENTRY(memmove)
-	.prologue
-	alloc 	r2 = ar.pfs, 3, Nrot - 3, 0, Nrot
-	.rotr	r[MEMLAT + 2], q[MEMLAT + 1]
-	.rotp	p[MEMLAT + 2]
-	mov	ret0 = in0		// return value = dest
-	.save pr, saved_pr
-	mov	saved_pr = pr		// save the predicate registers
-	.save ar.lc, saved_lc
-        mov 	saved_lc = ar.lc	// save the loop counter
-	.body
-	or	tmp3 = in0, in1 ;;	// tmp3 = dest | src
-	or	tmp3 = tmp3, in2	// tmp3 = dest | src | len
-	mov 	dest = in0		// dest
-	mov 	src = in1		// src
-	mov	len = in2		// len
-	sub	tmp2 = r0, in0		// tmp2 = -dest
-	cmp.eq	p6, p0 = in2, r0	// if (len == 0)
-(p6)	br.cond.spnt .restore_and_exit;;// 	return dest;
-	and	tmp4 = 7, tmp3 		// tmp4 = (dest | src | len) & 7
-	cmp.le	p6, p0 = dest, src	// if dest <= src it's always safe
-(p6)	br.cond.spnt .forward		// to copy forward
-	add	tmp3 = src, len;;
-	cmp.lt	p6, p0 = dest, tmp3	// if dest > src && dest < src + len
-(p6)	br.cond.spnt .backward		// we have to copy backward
-
-.forward:
-	shr.u	loopcnt = len, 4 ;;	// loopcnt = len / 16
-	cmp.ne	p6, p0 = tmp4, r0	// if ((dest | src | len) & 7 != 0)
-(p6)	br.cond.sptk .next		//	goto next;
-
-// The optimal case, when dest, src and len are all multiples of 8
-
-	and	tmp3 = 0xf, len
-	mov	pr.rot = 1 << 16	// set rotating predicates
-	mov	ar.ec = MEMLAT + 1 ;;	// set the epilog counter
-	cmp.ne	p6, p0 = tmp3, r0	// do we have to copy an extra word?
-	adds	loopcnt = -1, loopcnt;;	// --loopcnt
-(p6)	ld8	value = [src], 8;;
-(p6)	st8	[dest] = value, 8	// copy the "odd" word
-	mov	ar.lc = loopcnt 	// set the loop counter
-	cmp.eq	p6, p0 = 8, len
-(p6)	br.cond.spnt .restore_and_exit;;// the one-word special case
-	adds	adest = 8, dest		// set adest one word ahead of dest
-	adds	asrc = 8, src ;;	// set asrc one word ahead of src
-	nop.b	0			// get the "golden" alignment for
-	nop.b	0			// the next loop
-.l0:
-(p[0])		ld8	r[0] = [src], 16
-(p[0])		ld8	q[0] = [asrc], 16
-(p[MEMLAT])	st8	[dest] = r[MEMLAT], 16
-(p[MEMLAT])	st8	[adest] = q[MEMLAT], 16
-		br.ctop.dptk .l0 ;;
-
-	mov	pr = saved_pr, -1	// restore the predicate registers
-	mov	ar.lc = saved_lc	// restore the loop counter
-	br.ret.sptk.many b0
-.next:
-	cmp.ge	p6, p0 = OP_T_THRES, len	// is len <= OP_T_THRES
-	and	loopcnt = 7, tmp2 		// loopcnt = -dest % 8
-(p6)	br.cond.spnt	.cpyfew			// copy byte by byte
-	;;
-	cmp.eq	p6, p0 = loopcnt, r0
-(p6)	br.cond.sptk	.dest_aligned
-	sub	len = len, loopcnt	// len -= -dest % 8
-	adds	loopcnt = -1, loopcnt	// --loopcnt
-	;;
-	mov	ar.lc = loopcnt
-.l1:					// copy -dest % 8 bytes
-	ld1	value = [src], 1	// value = *src++
-	;;
-	st1	[dest] = value, 1	// *dest++ = value
-	br.cloop.dptk .l1
-.dest_aligned:
-	and	sh1 = 7, src 		// sh1 = src % 8
-	and	tmp2 = -8, len   	// tmp2 = len & -OPSIZ
-	and	asrc = -8, src		// asrc = src & -OPSIZ  -- align src
-	shr.u	loopcnt = len, 3	// loopcnt = len / 8
-	and	len = 7, len;;		// len = len % 8
-	adds	loopcnt = -1, loopcnt	// --loopcnt
-	addl	tmp4 = @ltoff(.table), gp
-	addl	tmp3 = @ltoff(.loop56), gp
-	mov     ar.ec = MEMLAT + 1	// set EC
-	mov     pr.rot = 1 << 16;;	// set rotating predicates
-	mov	ar.lc = loopcnt		// set LC
-	cmp.eq  p6, p0 = sh1, r0 	// is the src aligned?
-(p6)    br.cond.sptk .src_aligned
-	add	src = src, tmp2		// src += len & -OPSIZ
-	shl	sh1 = sh1, 3		// sh1 = 8 * (src % 8)
-	ld8	ploop56 = [tmp3]	// ploop56 = &loop56
-	ld8	ptable = [tmp4];;	// ptable = &table
-	add	tmp3 = ptable, sh1;;	// tmp3 = &table + sh1
-	mov	ar.ec = MEMLAT + 1 + 1 // one more pass needed
-	ld8	tmp4 = [tmp3];;		// tmp4 = loop offset
-	sub	loopaddr = ploop56,tmp4	// loopadd = &loop56 - loop offset
-	ld8	r[1] = [asrc], 8;;	// w0
-	mov	b6 = loopaddr;;
-	br	b6			// jump to the appropriate loop
-
-	LOOP(8)
-	LOOP(16)
-	LOOP(24)
-	LOOP(32)
-	LOOP(40)
-	LOOP(48)
-	LOOP(56)
-
-.src_aligned:
-.l3:
-(p[0])		ld8	r[0] = [src], 8
-(p[MEMLAT])	st8	[dest] = r[MEMLAT], 8
-		br.ctop.dptk .l3
-.cpyfew:
-	cmp.eq	p6, p0 = len, r0	// is len == 0 ?
-	adds	len = -1, len		// --len;
-(p6)	br.cond.spnt	.restore_and_exit ;;
-	mov	ar.lc = len
-.l4:
-	ld1	value = [src], 1
-	;;
-	st1	[dest] = value, 1
-	br.cloop.dptk	.l4 ;;
-.restore_and_exit:
-	mov     pr = saved_pr, -1    	// restore the predicate registers
-	mov 	ar.lc = saved_lc	// restore the loop counter
-	br.ret.sptk.many b0
-
-// In the case of a backward copy, optimise only the case when everything
-// is a multiple of 8, otherwise copy byte by byte.  The backward copy is
-// used only when the blocks are overlapping and dest > src.
-
-.backward:
-	shr.u	loopcnt = len, 3	// loopcnt = len / 8
-	add	src = src, len		// src points one byte past the end
-	add	dest = dest, len ;; 	// dest points one byte past the end
-	mov	ar.ec = MEMLAT + 1	// set the epilog counter
-	mov	pr.rot = 1 << 16	// set rotating predicates
-	adds	loopcnt = -1, loopcnt	// --loopcnt
-	cmp.ne	p6, p0 = tmp4, r0	// if ((dest | src | len) & 7 != 0)
-(p6)	br.cond.sptk .bytecopy ;;	// copy byte by byte backward
-	adds	src = -8, src		// src points to the last word
-	adds	dest = -8, dest 	// dest points to the last word
-	mov	ar.lc = loopcnt;;	// set the loop counter
-.l5:
-(p[0])		ld8	r[0] = [src], -8
-(p[MEMLAT])	st8	[dest] = r[MEMLAT], -8
-		br.ctop.dptk .l5
-		br.cond.sptk .restore_and_exit
-.bytecopy:
-	adds	src = -1, src		// src points to the last byte
-	adds	dest = -1, dest		// dest points to the last byte
-	adds	loopcnt = -1, len;;	// loopcnt = len - 1
-	mov	ar.lc = loopcnt;;	// set the loop counter
-.l6:
-(p[0])		ld1	r[0] = [src], -1
-(p[MEMLAT])	st1	[dest] = r[MEMLAT], -1
-		br.ctop.dptk .l6
-		br.cond.sptk .restore_and_exit
-END(memmove)
-
-	.rodata
-	.align 8
-.table:
-	data8	0			// dummy entry
-	data8 	.loop56 - .loop8
-	data8 	.loop56 - .loop16
-	data8 	.loop56 - .loop24
-	data8	.loop56 - .loop32
-	data8	.loop56 - .loop40
-	data8	.loop56 - .loop48
-	data8	.loop56 - .loop56
-
-libc_hidden_builtin_def (memmove)