i386: Ignore --enable-cet

Since shadow stack is only supported for x86-64, ignore --enable-cet for
i386.  Always setting $(enable-cet) for i386 to "no" to support

ifneq ($(enable-cet),no)

in x86 Makefiles.  We can't use

ifeq ($(enable-cet),yes)

since $(enable-cet) can be "yes", "no" or "permissive".
Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>

9 files changed, 137 insertions, 131 deletions

diff --git a/INSTALL b/INSTALL
index afd88dc5b1..be3697c62f 100644
--- a/INSTALL
+++ b/INSTALL
@@ -141,17 +141,14 @@ if ‘CFLAGS’ is specified it must enable optimization.  For example:
      indirect branch tracking (IBT) and shadow stack (SHSTK).  When CET
      is enabled, the GNU C Library is compatible with all existing
      executables and shared libraries.  This feature is currently
-     supported on i386, x86_64 and x32 with GCC 8 and binutils 2.29 or
-     later.  Note that when CET is enabled, the GNU C Library requires
-     CPUs capable of multi-byte NOPs, like x86-64 processors as well as
-     Intel Pentium Pro or newer.  With ‘--enable-cet’, it is an error to
-     dlopen a non CET enabled shared library in CET enabled application.
-     With ‘--enable-cet=permissive’, CET is disabled when dlopening a
-     non CET enabled shared library in CET enabled application.
-
-     NOTE: ‘--enable-cet’ has been tested for i686, x86_64 and x32 on
-     non-CET processors.  ‘--enable-cet’ has been tested for i686,
-     x86_64 and x32 on CET processors.
+     supported on x86_64 and x32 with GCC 8 and binutils 2.29 or later.
+     With ‘--enable-cet’, it is an error to dlopen a non CET enabled
+     shared library in CET enabled application.  With
+     ‘--enable-cet=permissive’, CET is disabled when dlopening a non CET
+     enabled shared library in CET enabled application.
+
+     NOTE: ‘--enable-cet’ has been tested for x86_64 and x32 on non-CET
+     and CET processors.
 
 ‘--enable-memory-tagging’
      Enable memory tagging support if the architecture supports it.
diff --git a/NEWS b/NEWS
index b35c673952..17110e7b88 100644
--- a/NEWS
+++ b/NEWS
@@ -9,6 +9,9 @@ Version 2.39
 
 Major new features:
 
+* Sync with Linux kernel 6.6 shadow stack interface.  Since only x86-64
+  is supported, --enable-cet is ignored for i386.
+
 * struct statvfs now has an f_type member, equal to the f_type statfs member;
   on the Hurd this was always available under a reserved name,
   and under Linux a spare has been allocated: it was always zero
diff --git a/manual/install.texi b/manual/install.texi
index ac5310731b..f752f6489d 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -169,17 +169,14 @@ Enable Intel Control-flow Enforcement Technology (CET) support.  When
 is protected with indirect branch tracking (IBT) and shadow stack
 (SHSTK)@.  When CET is enabled, @theglibc{} is compatible with all
 existing executables and shared libraries.  This feature is currently
-supported on i386, x86_64 and x32 with GCC 8 and binutils 2.29 or later.
-Note that when CET is enabled, @theglibc{} requires CPUs capable of
-multi-byte NOPs, like x86-64 processors as well as Intel Pentium Pro or
-newer.  With @option{--enable-cet}, it is an error to dlopen a non CET
+supported on x86_64 and x32 with GCC 8 and binutils 2.29 or later.
+With @option{--enable-cet}, it is an error to dlopen a non CET
 enabled shared library in CET enabled application.  With
 @option{--enable-cet=permissive}, CET is disabled when dlopening a
 non CET enabled shared library in CET enabled application.
 
-NOTE: @option{--enable-cet} has been tested for i686, x86_64 and x32
-on non-CET processors.  @option{--enable-cet} has been tested for
-i686, x86_64 and x32 on CET processors.
+NOTE: @option{--enable-cet} has been tested for x86_64 and x32
+on non-CET and CET processors.
 
 @item --enable-memory-tagging
 Enable memory tagging support if the architecture supports it.  When
diff --git a/sysdeps/i386/configure b/sysdeps/i386/configure
index f5c3a281ac..cd63d314fa 100644
--- a/sysdeps/i386/configure
+++ b/sysdeps/i386/configure
@@ -1,6 +1,11 @@
 # This file is generated from configure.ac by Autoconf.  DO NOT EDIT!
  # Local configure fragment for sysdeps/i386.
 
+# CET is only supported for x86-64.  Set enable-cet to "no" to allow
+# "ifneq ($(enable-cet),no)" in x86 Makefiles.
+config_vars="$config_vars
+enable-cet = "no""
+
 # We no longer support i386 since it lacks the atomic instructions
 # required to implement NPTL threading.
 if test "$config_machine" = i386; then
diff --git a/sysdeps/i386/configure.ac b/sysdeps/i386/configure.ac
index 234ef2454a..b7d9436557 100644
--- a/sysdeps/i386/configure.ac
+++ b/sysdeps/i386/configure.ac
@@ -1,6 +1,10 @@
 GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
 # Local configure fragment for sysdeps/i386.
 
+# CET is only supported for x86-64.  Set enable-cet to "no" to allow
+# "ifneq ($(enable-cet),no)" in x86 Makefiles.
+LIBC_CONFIG_VAR([enable-cet], ["no"])
+
 # We no longer support i386 since it lacks the atomic instructions
 # required to implement NPTL threading.
 if test "$config_machine" = i386; then
diff --git a/sysdeps/x86/configure b/sysdeps/x86/configure
index a2f9a7c2c6..1f4c2d67fd 100644
--- a/sysdeps/x86/configure
+++ b/sysdeps/x86/configure
@@ -1,76 +1,6 @@
 # This file is generated from configure.ac by Autoconf.  DO NOT EDIT!
  # Local configure fragment for sysdeps/x86.
 
-if test $enable_cet != no; then
-  # Check if CET can be enabled.
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether CET can be enabled" >&5
-printf %s "checking whether CET can be enabled... " >&6; }
-if test ${libc_cv_x86_cet_available+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  cat > conftest.c <<EOF
-#if !defined __CET__ || __CET__ != 3
-# error CET isn't available.
-#endif
-EOF
-		 if { ac_try='${CC-cc} -c $CFLAGS -fcf-protection -include cet.h conftest.c 1>&5'
-  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-		   libc_cv_x86_cet_available=yes
-		 else
-		   libc_cv_x86_cet_available=no
-		 fi
-		 rm -rf conftest*
-fi
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $libc_cv_x86_cet_available" >&5
-printf "%s\n" "$libc_cv_x86_cet_available" >&6; }
-  if test $libc_cv_x86_cet_available != yes; then
-    as_fn_error $? "$CC doesn't support CET" "$LINENO" 5
-  fi
-fi
-if test $enable_cet != no; then
-  # Check if assembler supports CET.
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether assembler supports CET" >&5
-printf %s "checking whether assembler supports CET... " >&6; }
-if test ${libc_cv_x86_cet_as+y}
-then :
-  printf %s "(cached) " >&6
-else $as_nop
-  cat > conftest.s <<EOF
-	incsspd %ecx
-EOF
-		 if { ac_try='${CC-cc} -c $CFLAGS conftest.s -o conftest.o 1>&5'
-  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-		   libc_cv_x86_cet_as=yes
-		 else
-		   libc_cv_x86_cet_as=no
-		 fi
-		 rm -rf conftest*
-fi
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $libc_cv_x86_cet_as" >&5
-printf "%s\n" "$libc_cv_x86_cet_as" >&6; }
-  if test $libc_cv_x86_cet_as = no; then
-    as_fn_error $? "$AS doesn't support CET" "$LINENO" 5
-  fi
-fi
-if test $enable_cet = yes; then
-  printf "%s\n" "#define DEFAULT_DL_X86_CET_CONTROL cet_elf_property" >>confdefs.h
-
-elif test $enable_cet = permissive; then
-  printf "%s\n" "#define DEFAULT_DL_X86_CET_CONTROL cet_permissive" >>confdefs.h
-
-fi
-config_vars="$config_vars
-enable-cet = $enable_cet"
-
 # Check if linker supports x86 ISA level.
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for linker x86 ISA level support" >&5
 printf %s "checking for linker x86 ISA level support... " >&6; }
diff --git a/sysdeps/x86/configure.ac b/sysdeps/x86/configure.ac
index c854bc74ca..437a50623b 100644
--- a/sysdeps/x86/configure.ac
+++ b/sysdeps/x86/configure.ac
@@ -1,49 +1,6 @@
 GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
 # Local configure fragment for sysdeps/x86.
 
-if test $enable_cet != no; then
-  # Check if CET can be enabled.
-  AC_CACHE_CHECK(whether CET can be enabled,
-		 libc_cv_x86_cet_available, [dnl
-cat > conftest.c <<EOF
-#if !defined __CET__ || __CET__ != 3
-# error CET isn't available.
-#endif
-EOF
-		 if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS -fcf-protection -include cet.h conftest.c 1>&AS_MESSAGE_LOG_FD); then
-		   libc_cv_x86_cet_available=yes
-		 else
-		   libc_cv_x86_cet_available=no
-		 fi
-		 rm -rf conftest*])
-  if test $libc_cv_x86_cet_available != yes; then
-    AC_MSG_ERROR([$CC doesn't support CET])
-  fi
-fi
-if test $enable_cet != no; then
-  # Check if assembler supports CET.
-  AC_CACHE_CHECK(whether assembler supports CET,
-		 libc_cv_x86_cet_as, [dnl
-cat > conftest.s <<EOF
-	incsspd %ecx
-EOF
-		 if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s -o conftest.o 1>&AS_MESSAGE_LOG_FD); then
-		   libc_cv_x86_cet_as=yes
-		 else
-		   libc_cv_x86_cet_as=no
-		 fi
-		 rm -rf conftest*])
-  if test $libc_cv_x86_cet_as = no; then
-    AC_MSG_ERROR([$AS doesn't support CET])
-  fi
-fi
-if test $enable_cet = yes; then
-  AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_elf_property)
-elif test $enable_cet = permissive; then
-  AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_permissive)
-fi
-LIBC_CONFIG_VAR([enable-cet], [$enable_cet])
-
 # Check if linker supports x86 ISA level.
 AC_CACHE_CHECK([for linker x86 ISA level support],
 	       libc_cv_include_x86_isa_level, [dnl
diff --git a/sysdeps/x86_64/configure b/sysdeps/x86_64/configure
index e307467afa..b4a80b8035 100755
--- a/sysdeps/x86_64/configure
+++ b/sysdeps/x86_64/configure
@@ -29,6 +29,76 @@ if test x"$build_mathvec" = xnotset; then
   build_mathvec=yes
 fi
 
+if test $enable_cet != no; then
+  # Check if CET can be enabled.
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether CET can be enabled" >&5
+printf %s "checking whether CET can be enabled... " >&6; }
+if test ${libc_cv_x86_cet_available+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat > conftest.c <<EOF
+#if !defined __CET__ || __CET__ != 3
+# error CET isn't available.
+#endif
+EOF
+		 if { ac_try='${CC-cc} -c $CFLAGS -fcf-protection -include cet.h conftest.c 1>&5'
+  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+		   libc_cv_x86_cet_available=yes
+		 else
+		   libc_cv_x86_cet_available=no
+		 fi
+		 rm -rf conftest*
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $libc_cv_x86_cet_available" >&5
+printf "%s\n" "$libc_cv_x86_cet_available" >&6; }
+  if test $libc_cv_x86_cet_available != yes; then
+    as_fn_error $? "$CC doesn't support CET" "$LINENO" 5
+  fi
+fi
+if test $enable_cet != no; then
+  # Check if assembler supports CET.
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether assembler supports CET" >&5
+printf %s "checking whether assembler supports CET... " >&6; }
+if test ${libc_cv_x86_cet_as+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  cat > conftest.s <<EOF
+	incsspd %ecx
+EOF
+		 if { ac_try='${CC-cc} -c $CFLAGS conftest.s -o conftest.o 1>&5'
+  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+		   libc_cv_x86_cet_as=yes
+		 else
+		   libc_cv_x86_cet_as=no
+		 fi
+		 rm -rf conftest*
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $libc_cv_x86_cet_as" >&5
+printf "%s\n" "$libc_cv_x86_cet_as" >&6; }
+  if test $libc_cv_x86_cet_as = no; then
+    as_fn_error $? "$AS doesn't support CET" "$LINENO" 5
+  fi
+fi
+if test $enable_cet = yes; then
+  printf "%s\n" "#define DEFAULT_DL_X86_CET_CONTROL cet_elf_property" >>confdefs.h
+
+elif test $enable_cet = permissive; then
+  printf "%s\n" "#define DEFAULT_DL_X86_CET_CONTROL cet_permissive" >>confdefs.h
+
+fi
+config_vars="$config_vars
+enable-cet = $enable_cet"
+
 test -n "$critic_missing" && as_fn_error $? "
 *** $critic_missing" "$LINENO" 5
 
diff --git a/sysdeps/x86_64/configure.ac b/sysdeps/x86_64/configure.ac
index 1215dcb1e4..937d1aff7e 100644
--- a/sysdeps/x86_64/configure.ac
+++ b/sysdeps/x86_64/configure.ac
@@ -14,5 +14,48 @@ if test x"$build_mathvec" = xnotset; then
   build_mathvec=yes
 fi
 
+if test $enable_cet != no; then
+  # Check if CET can be enabled.
+  AC_CACHE_CHECK(whether CET can be enabled,
+		 libc_cv_x86_cet_available, [dnl
+cat > conftest.c <<EOF
+#if !defined __CET__ || __CET__ != 3
+# error CET isn't available.
+#endif
+EOF
+		 if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS -fcf-protection -include cet.h conftest.c 1>&AS_MESSAGE_LOG_FD); then
+		   libc_cv_x86_cet_available=yes
+		 else
+		   libc_cv_x86_cet_available=no
+		 fi
+		 rm -rf conftest*])
+  if test $libc_cv_x86_cet_available != yes; then
+    AC_MSG_ERROR([$CC doesn't support CET])
+  fi
+fi
+if test $enable_cet != no; then
+  # Check if assembler supports CET.
+  AC_CACHE_CHECK(whether assembler supports CET,
+		 libc_cv_x86_cet_as, [dnl
+cat > conftest.s <<EOF
+	incsspd %ecx
+EOF
+		 if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s -o conftest.o 1>&AS_MESSAGE_LOG_FD); then
+		   libc_cv_x86_cet_as=yes
+		 else
+		   libc_cv_x86_cet_as=no
+		 fi
+		 rm -rf conftest*])
+  if test $libc_cv_x86_cet_as = no; then
+    AC_MSG_ERROR([$AS doesn't support CET])
+  fi
+fi
+if test $enable_cet = yes; then
+  AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_elf_property)
+elif test $enable_cet = permissive; then
+  AC_DEFINE(DEFAULT_DL_X86_CET_CONTROL, cet_permissive)
+fi
+LIBC_CONFIG_VAR([enable-cet], [$enable_cet])
+
 test -n "$critic_missing" && AC_MSG_ERROR([
 *** $critic_missing])