Age | Commit message (Collapse) | Author |
|
Change-Id: I4b911e4173da30c164bde7ea50bc80a70fbbb745
|
|
Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].
[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py
Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
|
|
This is a code snapshot of experimental work currently ongoing for a
next-generation codec.
The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features. This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.
Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.
Current changes include:
* Temporal coding experiment for segments (though still only 4 max, it
will likely be increased).
* Segment feature experiment - to allow various bits of information to
be coded at the segment level. Features tested so far include mode
and reference frame information, limiting end of block offset and
transform size, alongside Q and loop filter parameters, but this set
is very fluid.
* Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
in MBs using 16x16 prediction modes within inter frames.
* Compound prediction (combination of signals from existing predictors
to create a new predictor).
* 8 tap interpolation filters and 1/8th pel motion vectors.
* Loop filter modifications.
* Various entropy modifications and changes to how entropy contexts and
updates are handled.
* Extended quantizer range matched to transform precision improvements.
There are also ongoing further experiments that we hope to merge in the
near future: For example, coding of motion and other aspects of the
prediction signal to better support larger image formats, use of larger
block sizes (e.g. 32x32 and up) and lossless non-transform based coding
options (especially for key frames). It is our hope that we will be
able to make regular updates and we will warmly welcome community
contributions.
Please be warned that, at this stage, the codebase is currently slower
than VP8 stable branch as most new code has not been optimized, and
even the 'C' has been deliberately written to be simple and obvious,
not fast.
The following graphs have the initial test results, numbers in the
tables measure the compression improvement in terms of percentage. The
build has the following optional experiments configured:
--enable-experimental --enable-enhanced_interp --enable-uvintra
--enable-high_precision_mv --enable-sixteenth_subpel_uv
CIF Size clips:
http://getwebm.org/tmp/cif/
HD size clips:
http://getwebm.org/tmp/hd/
(stable_20120309 represents encoding results of WebM master branch
build as of commit#7a15907)
They were encoded using the following encode parameters:
--good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
--end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
--kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
--minsection-pct=0 --maxsection-pct=800 --sharpness=0
--arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
--arnr-type=3
Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
|
|
Just a clean-up.
Change-Id: Iea5b6dc925dcfa7db548bc1ab1a13d26ed5a2c9a
|
|
This should fix binaries using PIC on x86-32. Also should
fix issue 343.
Change-Id: I591de3ad68c8a8bb16054bd8f987a75b4e2bad02
|
|
Better fix for #326. ICC happens to support the inline magic
Change-Id: Ic367eea608c88d89475cb7b05d73500d2a1bc42b
|
|
the win64 abi requires saving and restoring xmm6:xmm15. currently
SAVE_XMM and RESTORE XMM only allow for saving xmm6:xmm7. allow
specifying the highest register used and if the stack is unaligned.
Change-Id: Ica5699622ffe3346d3a486f48eef0206c51cf867
|
|
|
|
Went through the code and fixed it. Verified on Windows.
Where possible, remove dependencies on xmm[67]
Current code relies on pushing rbp to the stack to get 16 byte
alignment. This broke when rbp wasn't pushed
(vp8/encoder/x86/sad_sse3.asm). Work around this by using unaligned
memory accesses. Revisit this and the offsets in
vp8/encoder/x86/sad_sse3.asm in another change to SAVE_XMM.
Change-Id: I5f940994d3ebfd977c3d68446cef20fd78b07877
|
|
|
|
Without this change I get link errors in firefox's libxul. It looks
like the linker expect a particular pattern for getting the GOT. This
patch changes webm to use the same pattern used by the compiler.
Change-Id: Iea8c2e134ad45c1dc7d221ff885a8429bfa4e057
|
|
Change-Id: I7504370c67a3c551627c6bb7e67c65f83d88b78e
|
|
- correct spelling
- remove explicit file name w/\file (unnecessary when contained in the
same file and prone to desync)
Change-Id: I68a3960ac5ab84d0f2e5c9b2e29799f26dfccf23
|
|
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
|
|
Use mpsadbw, and calculate 8 sad at once. Function list:
vp8_sad16x16x8_sse4
vp8_sad16x8x8_sse4
vp8_sad8x16x8_sse4
vp8_sad8x8x8_sse4
vp8_sad4x4x8_sse4
(test clip: tulip)
For best quality mode, this gave encoder a 5% performance boost.
For good quality mode with speed=1, this gave encoder a 3%
performance boost.
Change-Id: I083b5a39d39144f88dcbccbef95da6498e490134
|
|
The primary goal is to allow a binary to be built which supports
NEON, but can fall back to non-NEON routines, since some Android
devices do not have NEON, even if they are otherwise ARMv7 (e.g.,
Tegra).
The configure-generated flags HAVE_ARMV7, etc., are used to decide
which versions of each function to build, and when
CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen
at run time.
In order for this to work, the CFLAGS must be set to something
appropriate (e.g., without -mfpu=neon for ARMv7, and with
appropriate -march and -mcpu for even earlier configurations), or
the native C code will not be able to run.
The ASFLAGS must remain set for the most advanced instruction set
required at build time, since the ARM assembler will refuse to emit
them otherwise.
I have not attempted to make any changes to configure to do this
automatically.
Doing so will probably require the addition of new configure options.
Many of the hooks for RTCD on ARM were already there, but a lot of
the code had bit-rotted, and a good deal of the ARM-specific code
is not integrated into the RTCD structs at all.
I did not try to resolve the latter, merely to add the minimal amount
of protection around them to allow RTCD to work.
Those functions that were called based on an ifdef at the calling
site were expanded to check the RTCD flags at that site, but they
should be added to an RTCD struct somewhere in the future.
The functions invoked with global function pointers still are, but
these should be moved into an RTCD struct for thread safety (I
believe every platform currently supported has atomic pointer
stores, but this is not guaranteed).
The encoder's boolhuff functions did not even have _c and armv7
suffixes, and the correct version was resolved at link time.
The token packing functions did have appropriate suffixes, but the
version was selected with a define, with no associated RTCD struct.
However, for both of these, the only armv7 instruction they actually
used was rbit, and this was completely superfluous, so I reworked
them to avoid it.
The only non-ARMv4 instruction remaining in them is clz, which is
ARMv5 (not even ARMv5TE is required).
Considering that there are no ARM-specific configs which are not at
least ARMv5TE, I did not try to detect these at runtime, and simply
enable them for ARMv5 and above.
Finally, the NEON register saving code was completely non-reentrant,
since it saved the registers to a global, static variable.
I moved the storage for this onto the stack.
A single binary built with this code was tested on an ARM11 (ARMv6)
and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder,
and produced identical output, while using the correct accelerated
functions on each.
I did not test on any earlier processors.
Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
|
|
Use cpuid to check the vendor string against known
architectures.
Change-Id: I3fbd7f73638d71857a0c4a44a6275eb295fb4cef
|
|
=r was not restrictive enough and the compiler was not returning
ebx correctly.
Change-Id: I7606e384067bd5fb69189802f1ff64ccc5aa02d6
|
|
nasm does not automatically assume the source's directory also for its
include files.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: I386efa0cca5d401193416c11bd7363a283541645
|
|
nasm does not support `label wrt rip', it requires `rel label'. It is
still fully compatible with yasm.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: I488773a4e930a56e43b0cc72d867ee5291215f50
|
|
nasm requires the instruction length (movd/movq) to match to its
parameters. I find it more clear to really use 64bit instructions when
we use 64bit registers in the assembly.
Provide nasm compatibility. No binary change by this patch with yasm on
{x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: Id9b1a5cdfb1bc05697e523c317a296df43d42a91
|
|
GET_GOT was producing a zero length call. This resulted in
pipeline flushes occuring when returing from the assembly
functions. Masked on out of order cores, but evident on
Atom cores.
Change-Id: I8c375af313e8a169c77adbaf956693c0cfeb5ccd
|
|
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
|
|
Changed to use QueryPerformanceCounter on Windows rather than only
when building with MSVC, so that MSVC can link libs built with
MinGW.
Fixes issue #149.
Change-Id: Ie2dc7edc8f4d096cf95ec5ffb1ab00f2d67b3e7d
|
|
global label:data
^^
Provide nasm compatibility. No binary change by this patch with yasm
on {x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
{x86_64,i686}-fedora13-linux-gnu have been checked as safe.
Change-Id: I10f17eb1e4d4a718d4ebd1d0ccddc807c365e021
|
|
These are mostly vestigial, it's up to the compiler to decide what
should be inlined, and this collided with certain Windows platform SDKs.
Change-Id: I80dd35de25eda7773156e355b5aef8f7e44e179b
|
|
If the version script produced by the libvpx build system is not
used when linking a shared library on x86-64 Linux, the constant
data in the subpel filters produces R_X86_64_32 relocation errors
due to the use of wrt rip addressing instead of
wrt rip wrt ..gotpcrel.
Instead of adding a new macro for this addressing mode, this patch
sets the ELF visibility of these symbols to "hidden", which
allows wrt rip addressing to work without a text relocation.
This allows building a shared library without using the provided
build system or a separate version script.
Fixes http://code.google.com/p/webm/issues/detail?id=46
Change-Id: Ie108f9d9a4352e5af46938bf4750d2302c1b2dc2
|
|
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.
Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
|
|
Added sse2 version of vp8_regular_quantize_b which improved encode
performance(for the clip used) by ~10% for 32 bit builds and ~3% for
64 bit builds.
Also updated SHADOW_ARGS_TO_STACK to allow for more than 9 arguments.
Change-Id: I62f78eabc8040b39f3ffdf21be175811e96b39af
|
|
XMM6 to XMM15 are non-volatile on Windows x64 ABI. We have to save
these registers.
Change-Id: I4676309f1350af25c8a35f0c81b1f0499ab99076
|
|
Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
|
|
Fixes #2
Change-Id: Ie15c57ccf2f9721cb35102765d759817f2607cd7
|
|
This renames the vpx_codec/ directory to vpx/, to allow applications
to more consistently reference these includes with the vpx/ prefix.
This allows the includes to be installed in /usr/local/include/vpx
rather than polluting the system includes directory with an
excessive number of includes.
Change-Id: I7b0652a20543d93f38f421c60b0bbccde4d61b4f
|
|
This doesn't play well with autotools, and the preprocessor magic is
confusing and unhelpful in the vp8-only context.
Change-Id: I2fcb57e6eb7876ecb58509da608dc21f26077ff1
|
|
|