summaryrefslogtreecommitdiff
path: root/vpx/vp8cx.h
AgeCommit message (Collapse)Author
2018-06-20vp9-svc: Add support for spatial layer sync frames.Marco Paniconi
Add encoder control to allow application to insert spatial layer sync frame. The sync frame disables temporal prediction for that spatial layer. This is useful for RTC application to have receiver start decoding a higher spatial layer, without inserting a key frame on base spatial layer. If the layer sync is requested on the base spatial layer this then force a key frame, otherwise it only disables the temporal reference for that spatial layer, allowing temporal prediction to continue for the other layers. Although the temporal prediction is disabled and reset on a layer sync frame, the inter-layer prediction for the sync frame is enabled on INTER frames. So the meaning of INTER_LAYER_PRED_OFF_NONKEY is modified to mean disable inter-layer prediction on non-key and non-sync frames. Added unittest for inserting layer sync frames. Bump up ABI version. Change-Id: Id458acc400a77c853551f125c4e7b6d001991f03
2018-06-07vp9 svc: add control to set using second temporal ref.Jerome Jiang
Bump up ABI version. Change-Id: I4498d7ea4ed72994c5f847aa98e75b0150dd7f82
2018-05-24vp9-svc: Add max_consec_drop to SVC frame drop.Marco Paniconi
For any spatial, limits the amount of consecutive frame drop. Change-Id: I692d90363f329f571f2b59e12cc680ad2e76065d
2018-05-22vp9-svc: Add full superframe drop mode.Marco Paniconi
This will check for dropping full superframe if any spatial layer is overshooting. Change-Id: Ic656807028ebef5552301b6d10399fbe3a6c890c
2018-04-24vp9-svc: Add GET control to get SVC pattern info.Marco Paniconi
Copy ref frame index in SVC struct after set in encoder. Rename ext_{lst,gld,alt}_fb_idx to {lst,gld,alt}_fb_idx. Bump up ABI version. BUG=webm:1527 Change-Id: I06209040cb83d374030f40b79f0b36b0efe9f97d
2018-04-09vp9-svc: Make constrained_layer_drop default for svc.Marco Paniconi
Switch the order of constrained and layer drop mode, and keep constrained_layer_drop as the default. Update the svc datarate tests. Change-Id: I764270f7b4964b87b0cd3da6c2f96a628f212a30
2018-03-29VP9 SVC: Add enum type for framedrop_mode.Jerome Jiang
Change-Id: I3d4697b00729553e0860762b9264e29b8a89b9d4
2018-03-27vp9-svc: Add logic to enable for constrained framedrop.Marco Paniconi
Add the logic for the constrained framdrop mode for SVC. Add test case in datarate unittests. Also lower target bitrates in the tests to better test frame dropper. Change-Id: I8ee1b8cb56d835c233ad1fbe0fc1456cb2e7291f
2018-03-26vp9-svc: Allow for setting frame drop thresholds per layer.Marco Paniconi
Add encoder control to set the frame drop thresholds per spatial layer, and add a frame drop mode: 0 = per-layer drop, and 1 = constrained drop mode (a drop on a given layer forces drops to all upper layers). Default is mode 0 (per-layer dropping). Implementation for mode 1 will come in subsequent change. If the control is not used, then the spatial layer frame drop thresholds (water mark) are all equal and set to the value given by the encoder config (oxcf->drop_frames_water_mark). Bump up the ABI version. Change-Id: Id038d4181b86fa98b3d44d026f96d5f344d81629
2018-03-20VP9 SVC: Add control to disable inter layer prediction.Jerome Jiang
Add VP9E_SET_SVC_INTER_LAYER_PRED to disable inter layer (spatial) prediction. 0: prediction on 1: prediction off for all frames 2: prediction off for non key frames Bump up ABI version. Change-Id: I5ab2a96b47e6bef202290fe726bed5f99bd4951f
2018-02-09Reland "Add ROI support for VP9."Jerome Jiang
Extended ROI struct suitable for VP9. ROI input from user is passed into internal struct and applied on every frame (except key frame). Enabled usage of all 4 VP9 segment features (delta_qp, delta_lf, skip, ref_frame) via the ROI map input. Made changes to nonrd_pickmode for the ref_frame feature. Only works for realtime speed >= 5. AQ_MODE needs to be turned off for ROI to take effect. Change example in the sample encoder: vpx_temporal_svc_encoder.c to be suitable for VP9. Add datarate test. Bump up ABI version. BUG=webm:1470 Change-Id: I663b8c89862328646f4cc6119752b66efc5dc9ac
2018-01-11adopt some clang 5.0.0 formattingJohann
At least the changes that don't conflict with 4.0.1 Change-Id: I9b6a7c14dadc0738cd0f628a10ece90fc7ee89fd
2017-12-11vp9 svc: Allow denoising next to highest resolution.Jerome Jiang
Denoise 2 spatial layes at most. Add noise sensitivity level 2 for vp9 such that applications can control whether to denoise the second highest spatial layer. Add tests to cover this case. Change-Id: Ic327d14b29adeba3f0dae547629f43b98d22997f
2017-11-13New content type to improve grain retention.paulwilkins
For new VP9 only content type adjust the rate distortion and ARF filter based on the relative spatial variance of the source and reconstruction. In regards to the RD loop the method favors modes where the reconstruction variance is similar to the source variance. However it is currently only applied to regions where the source variance is quite low. For very low variance blocks it applies a further bias against intra coding and large prediction block sizes (the later in particular limit the usefulness of the loop filter). The final part of this change is to lower the strength of the ARF filter for blocks where the source has very low spatial variance, to encourage some low amplitude texture or noise to pass through the filter. This change improves the retention of film grain and fine noise / texture in spatially flat regions, but as expected causes a significant drop in PSNR on many clips. This is to be expected because similar but misaligned noise or texture will give a lower PSNR than a flat noise free reconstruction. However, it is worth noting that most clips show a strong gain in FAST SSIM. The features are enabled on the vpxenc command line by setting --tune-content=film. VPX_ENCODER_ABI_VERSION bumped for this change and cvbr. Change-Id: I26a4e4edfa3dc5cacead82fa701fe7a9118ccd0a
2017-07-06vp8cx,cosmetics: correct VP9_SET_TILE_COLUMNS docsJames Zern
this has been set to max since: f5c36a5ce VP9: turn on tile-columns and frame-parallel-mode by default ~v1.4.0 Change-Id: Ic796fc05abe73a58700ec50e3f8e72d3462898ec
2017-07-06vp8cx,cosmetics: correct VP9_SET_FRAME_PARALLEL_DECODING docsJames Zern
this has been on by default since: f5c36a5ce VP9: turn on tile-columns and frame-parallel-mode by default ~v1.4.0 Change-Id: I52017ab0157feaf429dce3d9e1af8a53bb5c1b65
2017-04-24Make the row based multi-threaded encoder deterministicYunqing Wang
This patch followed allow_exhaustive_searches feature modification and continued to modify the encoder to achieve the determinism in the row based multi-threaded encoding. While row-mt = 1 and using multiple threads, the adaptive feature in encoder was disabled, which gave BDRate gain(at speed 1, -0.6% ~ -0.7%; at speed 2, -0.46% ~ -0.59%), but some encoder speed losses(7% ~ 10% at speed 1 and 3% ~ 6% at speed 2). These speed losses were acceptable considering the speed gains obtained from row-mt. Change-Id: I60d87a25346ebc487a864b57d559f560b7e398bb
2017-04-06VP9 motion vector unit testYunqing Wang
To prevent the motion vector out of range bug, added a motion vector unit test in VP9. In the 4k video encoding, always forced to use extreme motion vectors and also encouraged to use INTER modes. In the decoding, checked if the motion vector was valid, and also checked the encoder/decoder mismatch. The tests showed that this unit test could reveal the issue we saw before. Change-Id: I0a880bd847dad8a13f7fd2012faf6868b02fa3b4
2017-02-27vp9: Rename new_mt to row_mtVignesh Venkatasubramanian
new_mt is a very generic name that will get obsolete soon enough. Since this is exposed as a codec control, renaming it to row_mt to signify row level paralellism. Also renaming the ETHREAD_BIT_MATCH codec control to ROW_MT_BIT_EXACT. Change-Id: Ic7872d78bb3b12fb4cf92ba028ec8e08eb3a9558
2017-02-13The bitstream bit match test in multi-threaded encoderYunqing Wang
While the new-mt mode is enabled(namely, allowing to use row-based multi-threading in encoder), several speed features that adaptively adjust encoding parameters during encoding would cause mismatch between single-thread encoded bitstream and multi-thread encoded bitstream. This patch provides a set_control API to disable these features, so that the bit match bitstream is obtained in the unit test. Change-Id: Ie9868bafdfe196296d1dd29e0dca517f6a9a4d60
2017-01-24Multi-threading of first pass stats collectionRanjit Kumar Tulabandu
(yunqingwang) 1. Rebased the patch. Incorporated recent first pass changes. 2. Turned on the first pass unit test. Change-Id: Ia2f7ba8152d0b6dd6bf8efb9dfaf505ba7d8edee
2016-10-19vp8: Add control for gf boost for 1 pass cbr.Marco
Control already exists for vp9, adding it to vp8. Usage is only when error_resilient is off. Added a datarate unittest for non-zero boost. Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
2016-08-24Add --alt-ref-aq=<int> optionYury Gitman
In the future this option will activate adaptive quantization special for altref frames. Encoder will create the adaptive quantization map on the basis of lookahead buffers similarity which is the estimate of the future motion compensation performance. Change-Id: Ia0088b3babb0f9a4899c79d8d819947ba5a03df2
2016-07-21vpx/: apply clang-formatclang-format
Change-Id: I95922a64568bf289863c1564212b6be5beec36df
2016-06-17remove vp10James Zern
development has moved to the nextgenv2 branch and a snapshot from here was used to seed aomedia BUG=b/29457125 Change-Id: Iedaca11ec7870fb3a4e50b2c9ea0c2b056a0d3c0
2016-06-15Add vp9 encoder API VP9E_GET_LEVEL to provide bitstream levelhui su
Change-Id: I1ef3df0192491035728fe9d5eb25cc66dc2965de
2016-05-11Fix typos in control function for VP9E_SET_TARGET_LEVELhui su
Change-Id: Ic797c6be579c3434681a5e9dbb3900ae49c43958
2016-05-10Add VP9 encoder API for level specification.hui su
Add control API VP9E_SET_TARGET_LEVEL that allows the encoder to control the output bitstream level and/or keep level related statistics. Usage: 255 do not care about level (default) 0 keep level related stats only 10 target for level 1 11 target for level 1.1 . . . 62 target for level 6.2 Usage for vpxenc: --target-level=0/255/10/11... Change-Id: I31d1aeca19358b893e7577b4e63748c8e614034a
2015-10-16vp8cx: remove deprecated reference/entropy controlsJames Zern
VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE and VP8E_USE_REFERENCE have been deprecated since the initial public release Change-Id: Ied16b441eec13434d85f1ab115d49ccaf5f2f7b0
2015-10-16vpx/*.h: add VPX_CTRL_* preproc definesJames Zern
allows controls to be tested for at compile-time Change-Id: I1cd01287dc144392956c82e6dbac003f37703039
2015-09-25vp9/10: improve support for render_width/height.Ronald S. Bultje
In the decoder, map this to the output variable vpx_image_t.r_w/h. This is intended as an improved version of VP9D_GET_DISPLAY_SIZE, which doesn't work with parallel frame decoding. In the encoder, map this to a codec control func (VP9E_SET_RENDER_SIZE) that takes a w/h pair argument in a int[2] (identical to VP9D_GET_DISPLAY_SIZE). Also add render_size to the encoder_param_get_to_decoder unit test. See issue 1030. Change-Id: I12124c13602d832bf4c44090db08c1009c94c7e8
2015-09-17Add SVC codec control to set frame flags and buffer indices.Marco
Add SVC codec control to set the frame flags and buffer indices for each spatial layer of the current (super)frame to be encoded. This allows the application to set (and change on the fly) the reference frame configuration for spatial layers. Added an example layer pattern (spatial and temporal layers) in vp9_spatial_svc_encoder for the bypass_mode using new control. Change-Id: I05f941897cae13fb9275b939d11f93941cb73bee
2015-09-16Add support for color-range.Ronald S. Bultje
In decoder, export (eventually) into vpx_image_t.range field. In encoder, use oxcf->color_range to set it (same way as for color_space). See issue 1059. Change-Id: Ieabbb2a785fa58cc4044bd54eee66f328f3906ce
2015-08-11Fork VP9 and VP10 codebaseJingning Han
This commit folks the VP9 and VP10 codebase and makes libvpx support VP8, VP9, and VP10. Change-Id: I81782e0b809acb3c9844bee8c8ec8f4d5e8fa356
2015-07-22Added TODOs for two unused #definesYaowu Xu
Change-Id: I70407e9350147d6585667f157d9cfe78c6251d26
2015-07-06Adds macros for new encoder controlsDebargha Mukherjee
To aid version management for integration with ffmpeg by use of: #ifdef VPX_CTRL_<CTRL_ID> ... #endif Change-Id: If550e06de4d3aa3685881f312ce6a86fa9de083b
2015-07-06Expose params min-gf-interval/max-gf-intervalDebargha Mukherjee
Adds two new vp9 parameters --min-gf-interval and --max-gf-interval to enable testing based on frequency of alt-ref frames. Also adds a unit-test to test enforcement of min-gf-interval. For both these parameters the default value is 0, which indicates they are picked by the encoder, based on resolution and framerate considerations. If they are greater than zero, the specified parameter is honored. (Additional note by paulwilkins) Note that there is a slight oddity in that key frames are also GFs and considered part of GF only group. However they are treated as not being part of an arf group because for arf groups the previous GF is assumed to be the terminal or overlay frame for the previous group. (end note) Change-Id: Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
2015-06-03Remove ABI check for 1 pass CBR SVC.Marco
Remove the ABI check for the controls needed for SVC 1 pass CBR mode. Bump up the ABI version. Change-Id: I35b79ee010e14af83c6d1e801d574deaaa2fc7eb
2015-06-02Vidyo patch: Rate control for SVC, 1 pass CBR mode.Marco
-Make Rate control work for SVC 1 pass CBR mode. -Added temporal layering mode. -Fixed bug in non-rd variance partition. -Modified/updated the sample encoders (vp9_spatial_svc_encoder, vpx_temporal_svc_encoder). -Added datarate unittest(s) for 1 pass CBR SVC. Change-Id: Ie94b1b68a56ea1267b5087c625e5df04def2ee48
2015-05-19VP8: For high overshoot, force drop frame and max-out QP.Marco
This allows rate control to react to content of current frame being encoded. Enabling this feature via the setting: screen_content_mode = 2. Change-Id: Ib2c6670551d96f4907495d5b7b76bb8c49e673db
2015-03-24VP9E_GET_ACTIVE_MAP API function.Alex Converse
This is useful when aq mode 3 (cyclic refresh) reactivates segments for refresh. Change-Id: I3ad1d9410b899ede393d82bb8db14e2da4d84eca
2015-03-23vp8cx.h: vpx/vpx_encoder.h -> ./vpx_encoder.hJames Zern
this matches the other includes and simplifies include paths in builds from source Change-Id: I344902c84f688ef93c9f3a53e7c06c30db49d8d3
2015-03-19put spatial svc behind an ABI checkJames Zern
this removes the CONFIG_* checks from public headers, but means '--enable-experimental --enable-spatial-svc' builds will fail without a local change to the ABI in vpx_encoder.h. this should be all right for testing this experiment. Change-Id: Ief55e7b9d1e8332cfce990275e04c29b30af0c4a
2015-03-13Provide information on codec controlsYaowu Xu
The commit updates the comments in vp8cx.h to make it clear which codec support each of codec control functions. Change-Id: Ibf876e289d4325bbb61ce19311da60d384624c2f
2015-03-12Added comment for vp9 only codec controlsYaowu Xu
Comments are updated to reflect that these controls apply to VP9 only, thereby, to insure the document produced by doxygent to reflect the same fact too. Change-Id: Ic54c88ec066aa0ec4552d43dd4a7016e1f810f42
2015-03-12Rename a vp9 only control with vp9e prefixYaowu Xu
Also updated comments and doc to make it clear that the control is supported in VP9 only. Change-Id: I6f120b65135fc1185695e9e3dc29fbe0d430824b
2015-01-15Fix obvious misses in doxygen mainpageYaowu Xu
Change-Id: I0537769904f0853c9299b36a91391f289acf442c
2015-01-14Merge "Add comments for two SVC related controls"Yaowu Xu
2015-01-14Merge "Add comments for two SVC related controls"Yaowu Xu
2015-01-14Merge "Add comments for control VP9E_SET_TUNE_CONTENT"Yaowu Xu
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 05:31:30 +0000