Age | Commit message (Collapse) | Author |
|
Change-Id: I00621ff7165bbe86a18794b4a816976c9effaf78
|
|
|
|
There is a corner case that when a frame is corrupted, the following
inter frame decode worker will miss the previous failure. To solve
this problem, a need_resync flag needs to be added to master thread
to keep control of that.
Change-Id: Iea9309b2562e7b59a83dd6b720607410286c90a6
|
|
using this to control reallocation would miss a change if the function
were not called for every frame.
fixes potential memory corruption by the subsequent memset
Change-Id: I4c6bb6ab68803104fc824c7e27cc2f9b2cf53e33
|
|
|
|
This commit prevent the encoder to update last_frame_type when a frame
is dropped in the encoder. Prior to this fix, if there is a dropped
frame immediatedly after a key frame, decoder would have the value of
last_frame_type as key frame, different from encoder as the dropped
frame in encoder would have updated the value to an inter frame. This
leads to different probability update in encoder and decoder, thereby
encoder/decoder mismatch.
This fixes issue #941
Change-Id: I27115224b138bec43ae3916c016574f5740822b0
|
|
|
|
|
|
Replaced a divide by 9 with 8, so some very small difference,
but otherwise no change in behavior.
Change-Id: I1079ae3c41e0789ff0bc6fa9940a238b6bca0f5b
|
|
|
|
Change-Id: I18428d0a93084f78ec136d9019f10466326c67e5
|
|
Adds a control function that allows the caller to get
the size of the current frame.
Change-Id: Iddfdedc0f3aa9aa46119f87d294681c82f275c9f
|
|
|
|
Force 64-bit precision in the intermediate steps.
Change-Id: I666113d9adcef8975da201d5aa1a13b783d09594
|
|
|
|
|
|
|
|
|
|
|
|
Simple skin detection, from vp8; works reasonable on most of the
RTC clips, but could miss sometimes.
Added debug flag to write out skin map over source input.
Change-Id: I2caea7592f1c459047aac46627eeb24a94946464
|
|
|
|
|
|
|
|
Change-Id: I7f63c2940256a5dadf9a29a853809290dd9e98ed
|
|
This commit allows the encoder to properly account for the mode
cost in sub8x8 non-RD mode decision.
Change-Id: I2951960d20e37ed08e372ee0c7044935b2b9b899
|
|
|
|
|
|
The block partition rate cost should be updated when recursive
partition search is needed.
Change-Id: I7bc5ad1fc2cbd3577dee7f7e8da111a2742bdeb9
|
|
Add the rate cost on inter prediction filter type to the overall
rate-distortion cost in vp9_pick_mode_inter.
Change-Id: I72c34017adf5220cadb3962694ee5404469fc673
|
|
This commit adds a heuristic rate cost of reference frame to the
non-RD mode decision. It improves the compression performance of
speed -6 by 0.31% and speed -5 by 0.69%.
Change-Id: If7f3b45519d49b2cb640bcb7316a254efc8be446
|
|
by saving xmm8; cglobal's xmm reg arg is 0-based
Change-Id: Ic8426ec9ac59ab4478716aa812452a6406794dcb
|
|
MODE_INFO struct was modified, and vp9_print_modes_and_motion_vectors()
didn't work anymore. This patch modified vp9_debugmodes.c so that
this function works again for debug usage.
Change-Id: I293fae0295235deb2529a460a274caf7c045ac1a
|
|
This is to avoid redo the same calculation repeatly, and also allow
easier adjustments for further experiments.
This commit shall have no effect on quality/compression.
Change-Id: I4460acf5c808ff5518da18d21e002c5da58af857
|
|
This border extension is not needed with on-demond border extension.
Change-Id: I8501b37f5f756dc7e874cef4c1cfdbfa9a16112a
|
|
this avoids conflicts with recent versions of mingw-w64 (tested g++
4.8.2) and the unit tests
Change-Id: Ic41ea31eebe0e3e712ed5e657f37d8cad6712088
|
|
|
|
|
|
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Change-Id: I13f341e0a82512f9e84e144e0f3b5aed8a65402b
|
|
|
|
|
|
This commit fixes the sub block partition size used in
fill_mode_info_sb. Previous implementation effectively disabled
the rectangular block sizes. This commit resolved this issue.
Change-Id: Ic1c383ab0a9a2e7d59e85b388093f1f1f94d1e7f
|
|
|
|
|
|
This will fix the frame parallel decode hang on windows
due to not enough semaphores.
This will also make the frame parallel decode safer as
the number of frame buffers could only support maximum
8 threads.
Change-Id: Id9ef50692819dcbebbd74a0aabffbfb3f39a4309
|
|
Change-Id: Ief6b526486bc729dcb787358bc0b781f278bdc66
|
|
Moved vp9_accumulate_frame_counts to vp9_thread_common.c to
eliminate the duplicate code.
Change-Id: I9cf506d729603c8bf1494b4c86a3b7d47af1917a
|
|
|
|
Renames the files to allow more common thread code to
be moved to vp9/common.
Change-Id: I7386e64e221086e3cdc087e79812f993c423413b
|
|
|
|
This commit makes the ZEROMV mode first in the search order to
ensure that the zero mv is always checked in the RTC coding mode.
It improves the average speed -6 compression performance by 0.3%
in both PSNR and SSIM at no visible speed change.
Change-Id: I465a7e59f4e20cd84fee3f02ced6f98036945949
|