Age | Commit message (Collapse) | Author |
|
From Change Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
There is still an issue relating to one animated test clip with repeat
patterns where this change effectively increase the default maximum
arf interval by +1. This can be examined seperately.
Change-Id: Idd01d5480fc45202d8a059a0c3afc0997cc5bdd1
|
|
Adds two new vp9 parameters --min-gf-interval and --max-gf-interval
to enable testing based on frequency of alt-ref frames.
Also adds a unit-test to test enforcement of min-gf-interval.
For both these parameters the default value is 0, which indicates
they are picked by the encoder, based on resolution and framerate
considerations. If they are greater than zero, the specified
parameter is honored.
(Additional note by paulwilkins)
Note that there is a slight oddity in that key frames are also GFs and
considered part of GF only group. However they are treated as not
being part of an arf group because for arf groups the previous GF is
assumed to be the terminal or overlay frame for the previous group.
(end note)
Change-Id: Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
|
|
Remove the ABI check for the controls needed for SVC 1 pass CBR mode.
Bump up the ABI version.
Change-Id: I35b79ee010e14af83c6d1e801d574deaaa2fc7eb
|
|
-Make Rate control work for SVC 1 pass CBR mode.
-Added temporal layering mode.
-Fixed bug in non-rd variance partition.
-Modified/updated the sample encoders (vp9_spatial_svc_encoder, vpx_temporal_svc_encoder).
-Added datarate unittest(s) for 1 pass CBR SVC.
Change-Id: Ie94b1b68a56ea1267b5087c625e5df04def2ee48
|
|
This is useful when aq mode 3 (cyclic refresh) reactivates segments for refresh.
Change-Id: I3ad1d9410b899ede393d82bb8db14e2da4d84eca
|
|
Change-Id: I49a7017e8adc18ff03d748cb328814a8a3e1bcf6
|
|
this removes the CONFIG_* checks from public headers, but means
'--enable-experimental --enable-spatial-svc' builds will fail without a
local change to the ABI in vpx_encoder.h. this should be all right for
testing this experiment.
Change-Id: Ief55e7b9d1e8332cfce990275e04c29b30af0c4a
|
|
These were uncovered by the chromoting perftest.
Change-Id: Ia5a90fd1718ff757c1484decf3861295260e6722
|
|
The commit updates the comments in vp8cx.h to make it clear which
codec support each of codec control functions.
Change-Id: Ibf876e289d4325bbb61ce19311da60d384624c2f
|
|
Also updated comments and doc to make it clear that the control is
supported in VP9 only.
Change-Id: I6f120b65135fc1185695e9e3dc29fbe0d430824b
|
|
|
|
Reducing these values from 100 makes rate control tighter by
default.
Change-Id: I979409c93e6f19e128898f08ad581bf67eb0f824
|
|
BUG=https://code.google.com/p/webm/issues/detail?id=964
Change-Id: I70679d0f139b8e0962f7e19eb56b34060953e9b0
|
|
Most of the current decoders use tile-based multithreading. Also
most of the current decoders need frame_parallel_decoding_mode
turned on to enable multithreaded decoding. tile-columns is
limited by resolution, so setting to max (6) is fine.
BUG=https://code.google.com/p/webm/issues/detail?id=963
Change-Id: I6e7ac3485d96bf0c69e06706cbb326dd38be0020
|
|
Change-Id: Iefb928ad1174e274409facfb44f80265ff0f7683
|
|
When GF group adaptive maxQ is enabled this patch accounts
somewhat for accumulated error in the rate control.
This improves accuracy quite a bit on many clips especially
when there is overshoot.
Examples when the overshoot and undershoot command line
parameters are set to 100:
Hall @ 1200 overshoot is reduced from 67-24%.
Akiyo @ 400 undershoot is reduced from 28%-15%.
Setting a lower value for undershoot or overshoot still
reduces the error further.
Impact on metrics is mixed with some gains in average psnr
but generally a little lower (e.g. 0.5%) on overall and ssim.
The GF group adaptation is still off by default in this patch.
Compared to with the head, enabling this mode now gives
big average psnr gains on the YT sets (e.g. YT_HD >11.2%),
a drop in overall PSNR (YT-HD 3.9%) and a smaller drop or
neutral for SSIM.
Change-Id: If4b32cd0740d3fb941317b374f9c2951954eee90
|
|
This resolves the encoder crashes on windows.
Change-Id: I159d79014cf9279751e403936ce1f84482ae82da
|
|
|
|
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
|
|
Allow changing colorspace in the encoder and increasing frame size.
Change-Id: I8e7c3b891af29ce420a15beb4f6f9c250245b2bb
|
|
master branch."
This reverts commit bde04ce5039cbcf86c8b34bdb4127e18d7e1d0c7
Change-Id: I053dae04c761b04a36dc239558503905a14d2470
|
|
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
|
|
Change-Id: I3d324e2baa4de2d266c5f7ca7b635b62372e90a7
|
|
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
|
|
Change-Id: If64052cc6e404abc8a64a889f42930d14fad21d3
|
|
Replaced "color space" with "color format" in comments where color
sampling format is concerned, so to differentiate from the concept
defined in COLOR_SPACE.
Change-Id: I8c935034c166b24307a99352dab1686531276bb8
|
|
|
|
Change-Id: If2d0888d13ebe52bc7c3b16f16319408a86ab6de
|
|
This commit removes undefined value options of cpu-used for VP9 and
changed vpxenc prompt to reflect the usable range of [-8,8]
Change-Id: Ib80fef3dbb6ec9aabac45ed13e8ab6fbaf94f55e
|
|
Currently, VP9 supports column-tile encoding, which allows a frame
to be encoded in multiple column tiles independently. The number of
column tiles are set by encoder option "--tile-columns". This
provides a way to encode a frame in parallel.
Based on previous set of patches, this patch implemented the tile-
based multi-threaded encoder. Each thread processes one or more
tiles.
Usage:
For HD clips:
--tile-columns=2 --threads=1/2/3/4
While using 4 threads, tests showed that the encoder achieved
2.3X - 2.5X speedup at good-quality speed 3, and 2X speedup at
realtime speed 5.
Change-Id: Ied987f8f2618b1283a8643ad255e88341733c9d4
|
|
Prepare for the introduction of frame-size change
logic into the recode loop.
Separated the speed dependent features into
separate static and dynamic parts, the latter being
those features that are dependent on the frame size.
Change-Id: Ia693e28c5cf069a1a7bf12e49ecf83e440e1d313
|
|
Adds support for one-pass rc-enabled SVC encoder with callbacks for
getting per-layer packets.
- the callback function registration is implemented as an encoder
control function.
- if the callback function is not registered, the old way of
aggregating packets with superframe will take effect.
- one more control function “VP9E_GET_SVC_LAYER_ID” has been
implemented to get the temporal/spatial id from the encoder
within the callback. This can be used to get the ids to put on RTP
packet.
Change-Id: I1a90e00135dde65da128b758e6c00b57299a111a
|
|
0 means that golden boost is off, and uses average frame target rate,
a non-zero number means the percentage of boost over average frame
bitrate is given initially to golden frames in CBR mode.
Change-Id: If4334fe2cc424b65ae0cce27f71b5561bf1e577d
|
|
Change-Id: I205de3611622cff7f751ea8baf9f82784581730a
|
|
Extend --auto-alt-ref from parameter so we can use it to
turn multi-arf on and off from the command line.
For now the range is 0-off, 1-on, 2-multi-arf on.
Rename play_alternate to enable_auto_arf
Change-Id: Id7b64407cfbe76ba0090a83b588a03e22a240386
|
|
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change remerged.
Change-Id: I9efab38bba7da86e056fbe8f663e711c5df38449
|
|
This reverts commit c113457af9880b8e15a36cdaabfd414d1c245693.
Temporary revert to allow clean revert of another commit.
Change-Id: Ia9b7b755e6c48e1b6e383329f121fef175a24b27
|
|
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change-Id: I60b680314e33a60b4093cafc296465ee18169c19
|
|
Change-Id: I034b73bb27e8023733aae63e6f8565f0a64c7267
|
|
Change-Id: Ie9fb6a4078eb6a3fb7c4ff1453831ab9afe23121
|
|
for each layer"
|
|
layer
vpx_svc_parameters_t contains id, resolution and min/max qp for each spatial layer.
In this change we will use extra config to send min/max qp and scaling factors, then calculate layer resolution inside encoder.
Change-Id: Ib673303266605fe803c3b067284aae5f7a25514a
|
|
Overhead goes down from 8% to 3% for 1080 60p
Change-Id: Idf3e5ca8712402a914a8cb79df17d3cdab63b163
|
|
Change from VP8E_SET_NOISE_SENSITIVITY to VP9E_SET_NOISE_SENSITIVITY
Change-Id: Ia210a7029b26924e30973f0f9798a338e0412407
|
|
|
|
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
|
|
Change-Id: I97d0cf095e9cfefdfa0f65eb5e96d6848cc9ffca
|
|
|
|
Change-Id: Ifa3c1cc2317c1bc21d1042b9662b35056d1e9ed0
|
|
Change-Id: I811526a9ee9f237604f72abe7fc677e39e0f457f
|