Age | Commit message (Collapse) | Author |
|
|
|
|
|
Eliminated unnecessary calculations. Very small change
to performance.
Change-Id: Ib7213d43c64e36955177c4d47950ff472266f822
|
|
In real-time mode, vp8_sad16x16 function is called heavily in
motion search part. Improvement of this function gives 1.2%
encoding performance gain (real-time mode, tulip clip).
Change-Id: I23c401fc40c061f732a9767e8d383737a179bd58
|
|
|
|
checks added to make sure that cpi->tplist
is freed correctly in vp8_dealloc_compressor_data
and vp8_alloc_compressor_data.
Change-Id: I66149dbbd25c958800ad94f4379d723191d9680d
|
|
Eliminated unnecessary calculations. Improved performance
by 10% on keyframes and 1.6% overall for the test clip used.
Change-Id: I87671b26af5e2cc439e81d0fee3b15c7cd2a3309
|
|
|
|
hasn't been kept up to date. remove it to avoid confusion.
Change-Id: I52ffde19b59fec5c7a381299ca2e85cb38330be7
|
|
|
|
As mentioned in check-in "Improve motion search in real-time mode",
MV prediction calculation causes speed loss for speed 7 and above.
This change added a flag to turn off this calculation for speed>6
in real-time mode.
Change-Id: I9f4ae5a8bf449222d1784b54e7d315fc8347b2d1
|
|
|
|
|
|
Applied better MV prediction in real-time mode, which improves
the encoding quality.
Used quarter-pixel search instead of iterative sub-pixel search
for speed >=5 to improve encoding performance.
Tests on the test set showed:
1. For speed=-5, quality improvement: 1.7% on AvgPSNR and 2.1%
on SSIM, performance improvement: 3.6% (This counts in the
performance lose caused by MV prediction calculation in "Improve
MV prediction in vp8_pick_inter_mode() for speed>3").
2. For speed=-8, quality improvement: 2.1% on AvgPSNR and 2.5%
on SSIM. but, 6.9% performance decrease because of MV prediction
calculation. This should be improved later.
Change-Id: I349a96c452bd691081d8c8e3e54419e7f477bebd
|
|
|
|
Created a new speed 1 which is in the middle of the old
speed 0 and speed 1. (for both quality and performance)
Change-Id: I4802133cdb43f359ca787646c090899679dd5d84
|
|
stride would not be calculated correctly for material
with odd sized frame widths.
Change-Id: I1710f6aef9ebb93d36249c9239c68c5baa9791f8
|
|
|
|
Use 0xFFF0 vice 240 (0xF0) for determining whether the sometimes
implicit bit 3 will be transmitted. This is consistent with the decoder
and encode_mvcomponent().
Change-Id: Ic1304d0ab56844bed8236edd1c5243a6767fc6b1
|
|
|
|
Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b
|
|
|
|
|
|
Adds vp8_sub_pixel_variance16x16_armv6 function to encoder. Integrates
ARMv6 optimized bilinear interpolations from vp8/common/arm/armv6
and adds new assembly file for variance16x16 calculation.
- vp8_filter_block2d_bil_first_pass_armv6 (integrated)
- vp8_filter_block2d_bil_second_pass_armv6 (integrated)
- vp8_variance16x16_armv6 (new)
- bilinearfilter_arm.h (new)
Change-Id: I18a8331ce7d031ceedd6cd415ecacb0c8f3392db
|
|
make reference version of bilinear_filters short.
use reference versions of bilinear_filters and sub_pel_filters when
possible.
recognize that Width was being passed into
filter_block2d_bil_first_pass multiple times. ARM version had already
fixed this. propegate to C.
change references to src_pixels_per_line to src_pitch and standardize on
src/dst (instead of input/output).
recognize that first_pass is only run in the verticle and second_pass
only horizontal. ARM version had already fixed this. propegate to C
Change-Id: I292d376d239a9a7ca37ec2bf03cc0720606983e2
|
|
Improved performance of good quality, speed 0 (3% average)
with no average quality loss.
Change-Id: Ica34473f99bd74260eaebde6b132185e09e3c09d
|
|
it's difficult to mux the *_offsets.c files because of header conflicts.
make three instead, name them consistently and partititon the contents
to allow building them as required.
Change-Id: I8f9768c09279f934f44b6c5b0ec363f7943bb796
|
|
preview_img d_w and d_h along with w and h
would not be updated for resized frames.
now uses sd.y_width and sd.y_height
Change-Id: I52241de4cc1de5e73f865e668bd70a7cbd954390
|
|
common/arm/vpx_asm_offsets moves up a level. prepare for muxing with
encoder/arm/vpx_vp8_enc_asm_offsets
Change-Id: I89a04a5235447e66571995c9d9b4b6edcb038e24
|
|
|
|
make vp8_mv_pred() and vp8_cal_sad() available in real-time mode.
Change-Id: I71dbae241b486ba943458dcbae552ec4a51689d3
|
|
we were holding on to this "just in case." purge it instead
Change-Id: I77a367b36d0821d731019f2566ecfffdae1d4b8a
|
|
|
|
The encoder was not correctly catching transitions in the quantizer
deltas. If a delta_q was set, then the quantizer would be reinitialized
on every frame, but if they transitioned to 0, the quantizer would
not be reinitialized, leading to a encode-decode mismatch.
This bug was triggered by commit 999e155, which sets a Y2 delta Q
for very low base Q levels.
Change-Id: Ia6733464a55ee4ff2edbb82c0873980d345446f5
|
|
|
|
Change-Id: I0d41415e3961c2c9492d342290c1999f9d02e6d8
|
|
|
|
manipulating it in situ via a pointer.
Change-Id: If4a87a4eccd84f39577c0e91e171245f4954c5cf
|
|
|
|
|
|
Whe auto keyframe insertion is enabled and conditions are right (scene change)
the encoder can decide to insert a key frame and does a re-encoding. This can
introduce extra latency. In RT mode we do not do the re-encoding of the current
frame but force the next frame to key frame.
Change-Id: I15c175fa845ac4c1a1f18bea3676e154669522a7
|
|
instead of each time mode is tested.
Change-Id: Ief0f5586dafde54cc14d348dcecdacb182e7c1d5
|
|
Change-Id: I2bcef6a8e47f88542861fd1356631ca934e2a0e7
|
|
Then removed unnecessary code.
Change-Id: I142658815d843c9396b07881dbdd8d387c43c90e
|
|
Restructured function in order to eliminate the prediction
modes save/restore. Code cleanup also.
Change-Id: I816e3b910de64d0f0f0ddc2398805c63263191e8
|
|
Reduce the number of sync points by letting each thread
continue imediatly with a new MB row.
Better multicore scaling, improves performance by 5-20% on ARM multicore.
Change-Id: Ic97e4d1c4886a842c85dd3539a93cb217188ed1b
|
|
from vp8cx_encode_intra_macro_block. prediction_error is used when
deciding if a frame should be a keyframe. After reviewing this with
Yaowu, it was pointed out that vp8cx_encode_intra_macro_block
is only called for keyframes, so the accumulation is unnecessary.
Change-Id: Id79dc81b80d4f5d124f3a0dba1b923887e2e1ec8
|
|
last_auto_filter_prediction_error is not really used.
Change-Id: Ic6e56c4076bbd250ef783ee1be46964c85f62864
|
|
vp8_pick_intra4x4mby_modes uses the passed in distortion
for an early breakout. The best distortion was never saved
and the distortion for TM_PRED was always used.
Change-Id: Idbaf73027408a4bba26601713725191a5d7b325e
|
|
|