| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Set on all 16x16 intra/inter modes
Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option
Have not tested with experiments.
hd: 2.60%
std-hd: 2.43%
yt: 1.32%
derf: 0.60%
Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
|
|
Merged the enhanced_interp experiment.
Found and fixed a bug in the include files framework, whereby
certain encoder files were still using the old INTERP_EXTEND
value of 3 instead of 4. The thresholds for mv range mcomp.c
need a small adjustment to prevent crashes.
The results are more or less unchanged.
Change-Id: Iac5008390f1efc97ce1102fbb5f8989c847fb579
|
|
Allows for swtiching/setting interpolation filters at the MB
level. A frame level flag indicates whether to use a specifc
filter for the entire frame or to signal the interpolation
filter for each MB. When switchable filters are used, the
encoder chooses between 8-tap and 8-tap sharp filters. The
code currently has options to explore other variations as well,
which will be cleaned up subsequently.
One issue with the framework is that encoding is slow. I
tried to do some tricks to speed things up but it is still slow.
Decoding speed should not be affected since the number of
filter taps remain unchanged.
With the current version, we are up 0.5% on derf on average but
some videos city/mobile improve by close to 4 and 2% respectively.
If we did a full-search by turning the SEARCH_BEST_FILTER flag
on, the results are somewhat better.
The framework can be combined with filtered prediction, and I
seek feedback regarding that.
Rebased.
Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
|
|
The following five experiments are merged:
newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
that improves results a little
in common/entropymode.c and encoder/modecosts.c
that were not merged from the internal branch)
newintramodes
expanded_coef_context
Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270
|
|
this commit removes a number of experiment options from configure
script. the associated experiments are already fully merged, the
options in configure script have no effect at all.
Change-Id: I8054ccaee0a04610162ed76ac9e59c4538217113
|
|
Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].
[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py
Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
|
|
This commit adds lossless compression capability to the experimental
branch. The lossless experiment can be enabled using --enable-lossless
in configure. When the experiment is enabled, the encoder will use
lossless compression mode by command line option --lossless, and the
decoder automatically recognizes a losslessly encoded clip and decodes
accordingly.
To achieve the lossless coding, this commit has changed the following:
1. To encode at lossless mode, encoder forces the use of unit
quantizer, i.e, Q 0, where effective quantization is 1. Encoder also
disables the usage of 8x8 transform and allows only 4x4 transform;
2. At Q 0, the first order 4x4 DCT/IDCT have been switched over
to a pair of forward and inverse Walsh-Hadamard Transform
(http://goo.gl/EIsfy), with proper scaling applied to match the range
of the original 4x4 DCT/IDCT pair;
3. At Q 0, the second order remains to use the previous
walsh-hadamard transform pair. However, to maintain the reversibility
in second order transform at Q 0, scaling down is applied to first
order DC coefficients prior to forward transform, and scaling up is
applied to the second order output prior to quantization. Symmetric
upscaling and downscaling are added around inverse second order
transform;
4. At lossless mode, encoder also disables a number of minor
features to ensure no loss is introduced, these features includes:
a. Trellis quantization optimization
b. Loop filtering
c. Aggressive zero-binning, rounding and zero-bin boosting
d. Mode based zero-bin boosting
Lossless coding test was performed on all clips within the derf set,
to verify that the commit has achieved lossless compression for all
clips. The average compression ratio is around 2.57 to 1.
(http://goo.gl/dEShs)
Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
|
|
Added the ability to optionally filter the prediction data
when inter modes are selected (excludes SPLITMV, for now).
The mode selection loop considers both the filtered and
non-filtered prediction data when choosing mode. The filter
can be turned on/off at the frame-level, or signaled for
each MB.
Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
|
|
Incorporates mv_ref, mbsplit and second_mv into the adaptive
entropy framework. The mv_ref framework has been modified from
before.
Adds some clean-ups and fixes.
Results with the adaptive entropy experiment are currently up by
+1.93% on derf; +2.33% std-hd and +1.87% yt-hd.
Fixed a nasty intermittent bug.
Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
|
|
Change-Id: I883b4f63559c1cf66a25016e946b1b1ae98a20da
|
|
This patch incorporates adaptive entropy coding of coefficient tokens,
and mode/mv information based on distributions encountered in a frame.
Specifically, there is an initial forward update to the probabilities
in the bitstream as before for coding the symbols in the frame, however
at the end of decoding each frame, the forward update to the
probabilities is reverted and instead the probabilities are updated
towards the actual distributions encountered within the frame.
The amount of update is weighted by the number of hits within each
context.
Results on derf/hd/std-hd are all up by 1.6%.
On derf, the most of the gains come from coefficients, however for the
hd and std-hd sets, the most of the gains come from the mode/mv
information updates.
Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
|
|
This commit added the ability to accumulate the coef stats across
different encodings using an intermediate binary stats files. The
accumulation happens only the binary stats file exists in current
directory. The encoder needs to be built with "ENTROPY_STATS" to
allow the output. The commit also fixed a few formating issues in
output stats file.
Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
|
|
Changes to the equations for kf and gf minQ and to
the boost calculations for kg and gf
Change-Id: I312031c910e6a575334f49075c32f49a8dfff239
|
|
Adds 6 directional intra predictiom modes for 16x16 and 8x8 blocks.
Change-Id: I25eccc0836f28d8d74922e4e9231568a648b47d1
|
|
This is the first patch in a series of changes to the first
pass code. (Broken down for ease of testing/merging/review).
This patch introduces a new stats element "sr_coded_error".
This is the coded error recorded vs the second reference
frame (which is updated such that it lags by at least one frame).
No use is made of the new structure in this change so this patch
should have no material effect.
Removed some ifdefs and deprecated code (#if NEW_BOOST).
Removed twopass.gf_decay_rate (not used any more)
Change-Id: I1be672a73017f7c13fd50fb4f99236aa2ed30916
|
|
1. block types
There are only three types of blocks for 8x8 transformed MBs, i.e. Y
block with DC does not exist for 8x8 transformed MBs as all MB using
8x8 transform have 2nd order haar transform. This commit introduced
a new macro BLOCK_TYPES_8X8 to reflect such fact.
2. context counters
This commit also fixed the mixed of context_counters between 4x4 and
8x8 transformed MBs. The mixed use of the counters leads me to think
the existing the context probabilities were not properly generated
from 8x8 transformed MBs.
3. redundant collecting in recoding
The commit also corrected the code that accumulates entropy stats by
making sure stats only collected for final packing, not during the
recode loop
Change-Id: I029f09f8f60bd0c3240cc392ff5c6d05435e322c
|
|
Change-Id: I87291fb40c745f34c36b067f47abdf69774a812f
|
|
Adds a speed feature to conduct a brute force search among a set of
available interpolation filters for the best one in an RD sense.
There is a gain of 0.4% on derf, 1.0% on Std-HD.
Patch 2: A macro added to determine if the encoder state is reset
for each new filter tried.
Patch 3: rebase, also fixes a bug (decodframe.c) introduced by a
couple of missing function pointer assignements.
Patch 4: rebase.
Change-Id: Ic9ccca9d8c35c6af557449ae867391a2f996cc29
|
|
The commit merges the UVINTRA experiment and removed the related
macros. The overall effect of the experiment is a small gain (.1%
on derf)
Change-Id: Ia34b3312fb9b5b34c9ba111bf0fa78c6f78ac80b
|
|
Change-Id: I0af3395500b1cb0ed629249eb6636a0c9322cb18
|
|
Turning off the interpolation filter selection based on edge
proportion. This heuristics has not been working as well as
expected and I have started a more rigorous investigation into
this. We can turn this off for now since it is unnecessarily
slowing things down.
Rebase.
Change-Id: Ic5958b2b3a35ec2d8eb73b6d81617ca8fbe07e74
|
|
Deleted check_gf_quality().
Change-Id: If75fbd84accb1f6471ad6ea6ff2b65ae99976f5d
|
|
Some code re-factored / moved to allow the main
pack operation inside the recode loop so that the
size estimate is accurate.
Deletion of some redundant code relating to one pass.
Aproximate improvement over March 27 code base:
Derf 0.0%, YT 0.5%, YThd 0.3% Std_hd 0.25%
Change-Id: Id2d071794ab44f0b52935f6fcdb5733d09a6bb86
|
|
Update the costing of skip in the recode loop and rd code.
Change-Id: I2e5ebbd7ddf201212b32441321e12626cd0423e9
|
|
Some adjustments to zbin for t8x8.
Changes to rules for sizing forced key frames.
Some extra stats output in tmp.stt.
Approximate gain on YT-hd set 0.5%
There are still issues in sizing key frames and gf/arf frames
when the image is largely static. These in part relate to
problems with cost estimates in the recode loop.
Change-Id: I6f0159dc8a8faeab4115a19c668d442491619a68
|
|
This is the first patch to add superblock (32x32) coding
order capabilities. It does not yet do any mode selection
at the SB level, that will follow in a further patch.
This patch encodes rows of SBs rather than
MBs, each SB contains 2x2 MBs.
Two intra prediction modes have been disabled since they
require reconstructed data for the above-right MB which
may not have been encoded yet (e.g. for the bottom right
MB in each SB).
Results on the one test clip I have tried (720p GIPS clip)
suggest that it is somewhere around 0.2dB worse than the
baseline version, so there may be bugs.
It has been tested with no experiments enabled and with
the following 3 experiments enabled:
--enable-enhanced_interp
--enable-high_precision_mv
--enable-sixteenth_subpel_uv
in each case the decode buffer matches the recon buffer
(using "cmp" to compare the dumped/decoded frames).
Note: Testing these experiments individually created
errors.
Some problems were found with other experiments but it
is unclear what state these experiments are in:
--enable-comp_intra_pred
--enable-newentropy
--enable-uvintra
This code has not been extensively tested yet, so there
is every likelihood that further bugs remain. I also
intend to do some code cleanup & refactoring in tandem
with the next patch that adds the 32x32 modes.
Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
|
|
Deprecate fast quant and strict_quant code.
Small effect on quality as fast was used in first pass but the
effect is basically neutral across the derf set.
The rationale here is to reduce the number of code paths for
now to make experimentation easier. Optimized and fast code
options can be re-introduced later along with other encode
speed options.
Change-Id: Ia30c5daf3dbc52e72c83b277a1d281e3c934cdad
|
|
Various refactoring to make the subpel motion compensation
filters switchable by a frame level field.
Two types of 8-tap filters are supported in addition to the existing
bilinar and sixtap filters. One is the default 8-tap and the
other has a sharper cut-off for use with frames with substantial
edge content.
Patch 2: Added a preliminary strategy for filter selection based on
edginess detecton. Also includes some filter changes.
Change-Id: I866085bda5ae143cfdf2ec88157feaabdf7bd63a
|
|
Using contextual coding of the mkb_skip_coeff flag using the
values of this flag from the left and above. There is a small
improvement of about 0.15% on Derf:
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext.html
Refactored to use pred_common.c by adding a new context type.
Results on HD set (about 0.66% improvement):
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext_hd.html
Incliding missing refactoring to use the pred_common utilities.
Change-Id: I95373382d429b5a59610d77f69a0fea2be628278
|
|
Change-Id: I6ade229ff400fe492709010ac5bada37f8afa73e
|
|
Change-Id: I8e9b6b154e1a0d0cb42d596366380d69c00ac15f
|
|
Change-Id: Ibcd2b9b247ff9f83331dac47f91ec285e8955ff1
|
|
This is the first patch for refactoring of the code related to
high-precision mv, so that 1/4 and 1/8 pel motion vectors can
co-exist in the same bit-stream by use of a frame level flag.
The current patch works fine for only use of 1/4th and
only use of 1/8th pel mv, but there are some issues with the
mode switching in between. Subsequent patches on this change Id
will fix the remaining issues.
Patch 2: Adds fixes to make sure that multiple mv precisions can
co-exist in the bit-stream. Frame level switching has been tested
to work correctly.
Patch 3: Fixes lines exceeding 80 char
Patch 4:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
Results on derf after ssse3 bugfix, compared to everything
enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
gains are about 3% now. Hopefully there are no more bugs lingering.
Apparently the sse3 bug affected the quartel subpel results more than
the eighth pel ones (which is understandabale because one bad predictor
due to the bug, matters less if there are a lot more subpel options
available as in the 1/8 subpel case).
The results in the 4th column correspond to the current settings.
The first two columns correspond to two settings of adaptive switching
of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
do not work as good as just using 1/8 all the time yet.
Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472
|
|
Removal of code relating to token partitioning
Change-Id: Iaf3c88d6758639a55bd92c3be5c51e6bed407a3c
|
|
Apparently the correct spelling of segement is segment !
Change-Id: I88593ee0523f251b3a96794c6166ef8c7898a029
|
|
Removal of error_resilient_mode features.
The interface has been left in place but does nothing.
Change-Id: I2407863bd0d3c98407354507423ca48d29f63b17
|
|
For now the interface elements have been left in place
to make sure existing parameter files work but parameters
relating to drop frame wont do anything.
Change-Id: I579ee614726387381c546845dac4bc03c74c6a07
|
|
Removal of code relating to spatial re sampling
Change-Id: Iff1bc651c62cd528f960c4b27f9673b172e68835
|
|
Change-Id: Ifdb17b56090a317b2aa82cf125d57934902c5298
|
|
This is the initial patch for supporting 1/8th pel
motion. Currently if we configure with enable-high-precision-mv,
all motion vectors would default to 1/8 pel. Encode and
decode syncs fine with the current code. In the next phase
the code will be refactored so that we can choose the 1/8
pel mode adaptively at a frame/segment/mb level.
Derf results:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
(about 0.83% better than 8-tap interpoaltion)
Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V
Patch 4: HD results.
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
Seems impressive (unless I am doing something wrong).
Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
use of c-versions of subpel filters with 8-taps and 1/16th pel;
Also redesigned the 8-tap filters to reduce the cut-off in order to
introduce a denoising effect. There is a new configure option
sixteenth-subpel-uv which will use 1/16 th pel interpolation for
uv, if the motion vectors have 1/8 pel accuracy.
With the fixes the results are promising on the derf set. The enhanced
interpolation option with 8-taps alone gives 3% improvement over thei
derf set:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
Results on high precision mv and on the hd set are to follow.
Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in
vp8/common/x86/x86_systemdependent.c
Patch 7: Cleaning up various debug messages.
Patch 8: Merge conflict
Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
|
|
Removal of most code to do with 1 pass.
Removal of cyclic refresh code.
Change-Id: I74971082bc19dd76e795d4d2e781a0424cec5c8c
|
|
Removal of the pickinter.c and .h files and calls to this
code.
Removal of some code relating to real time and one pass
settings though there is more to be done in this regard.
However, vp8_set_speed_features() now
only supports modes 0 and 1 and speeds up to 3
so rd should always be set.
Change-Id: I62c0c1b6154ab499785baef310536080e87bc4d8
|
|
Previously, the scaling related to extended quantize range happens in
dequantization stage, which implies the coefficients form forward
transform are in different scale(4x) from dequantization coefficients
This worked fine when there was not distortion computation done based
on 8x8 transform, but it completely wracked the distortion estimation
based on transform coefficients and dequantized transform coefficients
introduced in commit f64725a00 for macroblocks using 8x8 transform.
This commit fixed the issue by moving the scaling into the stage of
inverse 8x8 transform.
TODO: Test&Verify the transform/quantization pipeline accuracy.
Change-Id: Iff77b36a965c2a6b247e59b9c59df93eba5d60e2
|
|
Removed ~CONFIG_REALTIME_ONLY code.
Change-Id: I5fafff29a08acd8928699f9ddce8744787024d8c
|
|
For the experimental branch we are trying to slim the codebase
down removing features such as threading for now which complicate
the process of development and testing.
Change-Id: I657c0246aef4d1fa8c8ffc6a1adfeee45bce8e24
|
|
In summary, this commit encompasses a series of changes in attempt to
improve the 8x8 transform based coding to help overall compression
quality, please refer to the detailed commit history below for what
are the rationale underly the series of changes:
a. A frame level flag to indicate if 8x8 transform is used at all.
b. 8x8 transform is not used for key frames and small image size.
c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
and I8X8_PRED are forced to using 4x4 transform based coding, the
rest uses 8x8 transform based coding.
d. Encoder and decoder has the same assumption on the relationship
between prediction modes and transform size, therefore no signaling
is encoded in bitstream.
e. Mode decision process now calculate the rate and distortion scores
using their respective transforms.
Overall test results:
1. HD set
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
(avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
2. Cif set:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
(avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
It should be noted here, as 8x8 transform coding itself is disabled
for cif size clips, the 0.03% loss is purely from the 1 bit/frame
flag overhead on if 8x8 transform is used or not for the frame.
---patch history for future reference---
Patch 1:
this commit tries to select transform size based on macroblock
prediction mode. If the size of a prediction mode is 16x16, then
the macroblock is forced to use 8x8 transform. If the prediction
mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
to use 4x4 transform. Tests on the following HD clips showed mixed
results: (all hd clips only used first 100 frames in the test)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
while the results are mixed and overall negative, it is interesting to
see 8x8 helped a few of the clips.
Patch 2:
this patch tries to hard-wire selection of transform size based on
prediction modes without using segmentation to signal the transform size.
encoder and decoder both takes the same assumption that all macroblocks
use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
SPLITMV. Test results are as follows:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
Interestingly, by removing the overhead or coding the segmentation, the
results on this limited HD set have turn positive on average.
Patch 3:
this patch disabled the usage of 8x8 transform on key frames, and kept the
logic from patch 2 for inter frames only. test results on HD set turned
decidedly positive with 8x8 transform enabled on inter frame with 16x16
prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
results on cif set still negative overall
Patch 4:
continued from last patch, but now in mode decision process, the rate and
distortion estimates are computed based on 8x8 transform results for MBs
with modes associated with 8x8 transform. This patch also fixed a problem
related to segment based eob coding when 8x8 transform is used. The patch
significantly improved the results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
(avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
results on cif also improved, though they are still negative compared to
baseline that uses 4x4 transform only:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
(avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
Patch 5:
This patch does 3 things:
a. a bunch of decoder bug fixes, encodings and decodings were verified
to have matched recon buffer on a number of encodes on cif size mobile and
hd version of _pedestrian.
b. the patch further improved the rate distortion calculation of MBS that
use 8x8 transform. This provided some further gain on compression.
c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
transformed macroblock, test results indicates it improves the cif set
but hurt the HD set slightly.
Tests results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
(avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
Test results on cif clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
(avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
Patch 6:
Added a frame level flag to indicate if 8x8 transform is allowed at all.
temporarily the decision is based on frame size, can be optimized later
one. This get the cif results to basically unchanged, with one bit per
frame overhead on both cif and hd clips.
Patch 8:
Rebase and Merge to head by PGW.
Fixed some suspect 4s that look like hey should be 64s in regard
to segmented EOB. Perhaps #defines would be bette.
Bulit and tested without T8x8 enabled and produces unchanged
output.
Patch 9:
Corrected misalligned code/decode of "txfm_mode" bit.
Limited testing for correct encode and decode with
T8x8 configured on derf clips.
Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
|
|
Change-Id: Ieaaa07c50eae41118596197f6a4d848135946e41
|
|
This commit only involves the removal of placeholder comments
//#if CONFIG_SEGFEATURES.
Change-Id: I94b350daaf998ee0cfdde5aa25b1d3b0522ab816
|
|
Merge the extended Q experiment as indicated by the
Change-Id: I02d9e654fff9998cc7e9e2f1f5cd838dad8fb431
|
