| Age | Commit message (Collapse) | Author |
|---|
|
Alternative strategy for finding a list of candidate motion
vectors to use as reference values in mv coding and as
nearest and near.
Sort by sad in vp8_find_best_ref_mvs() rather than just
pick the best. Allow 0,0 as a best ref option but not a
nearest or near unless there are no alternatives.
Encode/Decode verified on at least some clips.
Some commented out experimental and stats code still in place.
Gain over existing code averages about 1% on derf (alll metrics)
with improvement on all clips. Other test results pending.
The entropy coding of the mode (nearest/near etc) still
depends upon and requires the old "findnear" code so
this needs looking at and may provide room for further gains.
Change-Id: I871d7cba1d1c379c4bad9bcccce1fb19c46b8247
|
|
corrected ifdefs to include CONFIG_HYBRIDTRANSFORM8X8 for missing
definitions
Change-Id: I96cd08c98d74b5ba10866f3fa30252073ce92fa5
|
|
This commit adds a pick_sb_mode() function which selects the best 32x32
superblock coding mode. Then it selects the best per-MB modes, compares
the two and encodes that in the bitstream.
The bitstream coding is rather simplistic right now. At the SB level,
we code a bit to indicate whether this block uses SB-coding (32x32
prediction) or MB-coding (anything else), and then we follow with the
actual modes. This could and should be modified in the future, but is
omitted from this commit because it will likely involve reorganizing
much more code rather than just adding SB coding, so it's better to let
that be judged on its own merits.
Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%.
Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
|
|
Further cases of inconsistent naming convention.
Change-Id: Id3411ecec6f01a4c889268a00f0c9fd5a92ea143
|
|
Change-Id: I27729a8631cffd54dfbae3ec0f07df7c883f7510
|
|
Change-Id: Id38baf1b89648ef534e28be72f583137871f920c
|
|
Using surrounding reconstructed pixels from left and above to select
best matching mv to use as reference motion vector for mv encoding.
Test results:
AVGPSNR GLBPSNR VPXSSIM
Derf: 1.107% 1.062% 0.992%
Std-hd:1.209% 1.176% 1.029%
Change-Id: I8f10e09ee6538c05df2fb9f069abcaf1edb3fca6
|
|
Merged in the high_precision_mv experiment to make it easier
to work on new mv encoding strategies. Also removed
coef_update_probs3().
Change-Id: I82d3b0bb642419fe05dba82528bc9ba010e90924
|
|
Fixed the code review comments.
Under the htrans8x8 experiment the 8X8 DCT in the
I8X8 mode is replaced with a combination of 8X8 ADST and
DCT.
Overall coding gains with the htrans8x8 experiment are:
derf: 0.486
std-hd: 1.040
hd: 1.063
yt: 0.506
Note that part of the gain comes from bigger transforms
(8x8 instead of 4x4) and part comes from replacing the DCT
wth the ADST.
Change-Id: I92ca6bbfce11b4165d612b81d9adfad4d010c775
|
|
|
|
Set on all 16x16 intra/inter modes
Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option
Have not tested with experiments.
hd: 2.60%
std-hd: 2.43%
yt: 1.32%
derf: 0.60%
Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
|
|
Merged the enhanced_interp experiment.
Found and fixed a bug in the include files framework, whereby
certain encoder files were still using the old INTERP_EXTEND
value of 3 instead of 4. The thresholds for mv range mcomp.c
need a small adjustment to prevent crashes.
The results are more or less unchanged.
Change-Id: Iac5008390f1efc97ce1102fbb5f8989c847fb579
|
|
Allows for swtiching/setting interpolation filters at the MB
level. A frame level flag indicates whether to use a specifc
filter for the entire frame or to signal the interpolation
filter for each MB. When switchable filters are used, the
encoder chooses between 8-tap and 8-tap sharp filters. The
code currently has options to explore other variations as well,
which will be cleaned up subsequently.
One issue with the framework is that encoding is slow. I
tried to do some tricks to speed things up but it is still slow.
Decoding speed should not be affected since the number of
filter taps remain unchanged.
With the current version, we are up 0.5% on derf on average but
some videos city/mobile improve by close to 4 and 2% respectively.
If we did a full-search by turning the SEARCH_BEST_FILTER flag
on, the results are somewhat better.
The framework can be combined with filtered prediction, and I
seek feedback regarding that.
Rebased.
Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
|
|
The following five experiments are merged:
newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
that improves results a little
in common/entropymode.c and encoder/modecosts.c
that were not merged from the internal branch)
newintramodes
expanded_coef_context
Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270
|
|
Adds ADST/DCT hybrid transform coding for Intra4x4 mode.
The ADST is applied to directions in which the boundary
pixels are used for prediction, while DCT applied to
directions without corresponding boundary prediction.
Adds enum TX_TYPE in b_mode_infor to indicate the transform
type used.
Make coding style consistent with google style.
Fixed the commented issues.
Experimental results in terms of bit-rate reduction:
derf: 0.731%
yt: 0.982%
std-hd: 0.459%
hd: 0.725%
Will be looking at 8x8 transforms next.
Change-Id: I46dbd7b80dbb3e8856e9c34fbc58cb3764a12fcf
|
|
Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].
[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py
Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f
|
|
Added the ability to optionally filter the prediction data
when inter modes are selected (excludes SPLITMV, for now).
The mode selection loop considers both the filtered and
non-filtered prediction data when choosing mode. The filter
can be turned on/off at the frame-level, or signaled for
each MB.
Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
|
|
Adds 6 directional intra predictiom modes for 16x16 and 8x8 blocks.
Change-Id: I25eccc0836f28d8d74922e4e9231568a648b47d1
|
|
This patch expands the set of prev contexts used for video coding
from 3 to 4.
There is a small improvement of the order of 0.08% for derf and
0.15% on the HD set. The tests were rerun after the various merges
last week. There are two columns in each test - the first are the
results with the mbskip change, and the second with expanded contexts
added on top of that.
Derf:
http://www.corp.google.com/~debargha/vp8_results/explibvpx_newentropy_expcontext.html
HD:
http://www.corp.google.com/~debargha/vp8_results/explibvpx_hd_newentropy_expcontext.html
Rebased.
Broke up 80 char lines.
Change-Id: I82d2e72d054e530cbf5ce9aa0e6d85c582965675
|
|
Change-Id: I0af3395500b1cb0ed629249eb6636a0c9322cb18
|
|
This is the first patch to add superblock (32x32) coding
order capabilities. It does not yet do any mode selection
at the SB level, that will follow in a further patch.
This patch encodes rows of SBs rather than
MBs, each SB contains 2x2 MBs.
Two intra prediction modes have been disabled since they
require reconstructed data for the above-right MB which
may not have been encoded yet (e.g. for the bottom right
MB in each SB).
Results on the one test clip I have tried (720p GIPS clip)
suggest that it is somewhere around 0.2dB worse than the
baseline version, so there may be bugs.
It has been tested with no experiments enabled and with
the following 3 experiments enabled:
--enable-enhanced_interp
--enable-high_precision_mv
--enable-sixteenth_subpel_uv
in each case the decode buffer matches the recon buffer
(using "cmp" to compare the dumped/decoded frames).
Note: Testing these experiments individually created
errors.
Some problems were found with other experiments but it
is unclear what state these experiments are in:
--enable-comp_intra_pred
--enable-newentropy
--enable-uvintra
This code has not been extensively tested yet, so there
is every likelihood that further bugs remain. I also
intend to do some code cleanup & refactoring in tandem
with the next patch that adds the 32x32 modes.
Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
|
|
Using contextual coding of the mkb_skip_coeff flag using the
values of this flag from the left and above. There is a small
improvement of about 0.15% on Derf:
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext.html
Refactored to use pred_common.c by adding a new context type.
Results on HD set (about 0.66% improvement):
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext_hd.html
Incliding missing refactoring to use the pred_common utilities.
Change-Id: I95373382d429b5a59610d77f69a0fea2be628278
|
|
The commit added a clamp to the 2nd motion vector used in compound
prediction to insure mv within UMV borders. The clamp is similar to
that of the first motion vector except that No SPLITMV is ever used
for the 2nd motion vector.
Change-Id: I26dd63c304bd66b2e03a083749cc98c641667116
|
|
Change-Id: I8e9b6b154e1a0d0cb42d596366380d69c00ac15f
|
|
Also remove duplicate build_intra_predictors_mby/uv().
Change-Id: I78607e7304952a9b962a5b25af9bb9c48692187b
|
|
Apparently the correct spelling of segement is segment !
Change-Id: I88593ee0523f251b3a96794c6166ef8c7898a029
|
|
Removed redundant code for ref frame cost.
|
|
This is the initial patch for supporting 1/8th pel
motion. Currently if we configure with enable-high-precision-mv,
all motion vectors would default to 1/8 pel. Encode and
decode syncs fine with the current code. In the next phase
the code will be refactored so that we can choose the 1/8
pel mode adaptively at a frame/segment/mb level.
Derf results:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
(about 0.83% better than 8-tap interpoaltion)
Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V
Patch 4: HD results.
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
Seems impressive (unless I am doing something wrong).
Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
use of c-versions of subpel filters with 8-taps and 1/16th pel;
Also redesigned the 8-tap filters to reduce the cut-off in order to
introduce a denoising effect. There is a new configure option
sixteenth-subpel-uv which will use 1/16 th pel interpolation for
uv, if the motion vectors have 1/8 pel accuracy.
With the fixes the results are promising on the derf set. The enhanced
interpolation option with 8-taps alone gives 3% improvement over thei
derf set:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
Results on high precision mv and on the hd set are to follow.
Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in
vp8/common/x86/x86_systemdependent.c
Patch 7: Cleaning up various debug messages.
Patch 8: Merge conflict
Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
|
|
Removed some transform code that is not in use.
Change-Id: I9489af7e23d9d7fe052feb6c8bbafa62ebbda39c
|
|
The commit rationized and simplified the entropy context conversion
betwen MB using 8x8 transform and MB using 4x4 transform. The old version
had a number of weirdness in how 4x4 transform MB's context is used for
8x8 blocks other than the first 8x8 within a MB.
Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
the limited HD set.
Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47
|
|
Added a bit to signify that the feature changed since
the last time we sent it, or not so that we don't need
to send all the databits for every feature change.
added config
Change-Id: I8d3064ce90d4500bf0d5c6b87c664e46138dfcac
|
|
Change-Id: Ieaaa07c50eae41118596197f6a4d848135946e41
|
|
This commit only involves the removal of placeholder comments
//#if CONFIG_SEGFEATURES.
Change-Id: I94b350daaf998ee0cfdde5aa25b1d3b0522ab816
|
|
Merged in most of the current common prediction changes
that were under the #if CONFIG_COMPRED option.
Change-Id: If4e6f61dbe7b86dd449f6effbe93b5eb7e893885
|
|
This commit merges the NEWNEAR experiment such that it
is effectively always on.
The fact that there were changes in the threading code again
highlights the need to strip out such features during the
bitstream development phase as trying to maintain this code
(especially as it is not being tested) slows the development cycle.
Change-Id: I8b34950a1333231ced9928aa11cd6d6459984b65
|
|
This function adds the common prediction modules, some data structures
and a config option but does not use them.
It also corrects a bug in clearing down the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.
Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0
|
|
In this commit only the decoder side was updated.
Change-Id: Ia9bd58da07d1a943f028e330f0489344e62b0d02
|
|
Moved some segmentation data structures into VP8_COMMON
Change-Id: I59c6e2edf7a0176e35319936eea450027aeb3b39
|
|
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.
Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
|
|
This patch introduces the concept of dual inter16x16 prediction. A
16x16 inter-predicted macroblock can use 2 references instead of 1,
where both references use the same mvmode (new, near/est, zero). In the
case of newmv, this means that two MVs are coded instead of one. The
frame can be encoded in 3 ways: all MBs single-prediction, all MBs dual
prediction, or per-MB single/dual prediction selection ("hybrid"), in
which case a single bit is coded per-MB to indicate whether the MB uses
single or dual inter prediction.
In the future, we can (maybe?) get further gains by mixing this with
Adrian's 32x32 work, per-segment dual prediction settings, or adding
support for dual splitmv/8x8mv inter prediction.
Gain (on derf-set, CQ mode) is ~2.8% (SSIM) or ~3.6% (glb PSNR). Most
gain is at medium/high bitrates, but there's minor gains at low bitrates
also. Output was confirmed to match between encoder and decoder.
Note for optimization people: this patch introduces a 2nd version of
16x16/8x8 sixtap/bilin functions, which does an avg instead of a
store. They may want to look and make sure this is implemented to
their satisfaction so we can optimize it best in the future.
Change-ID: I59dc84b07cbb3ccf073ac0f756d03d294cb19281
|
|
this commit is to add an variable in the macroblock level mode
info structure to track the transform size used in each MB, so
the information can be used later in the loop filter to change
how loop filter works on MBs with different transform sizes.
Change-Id: Id0eeaba6cc854c6d1be00ed8d237b3d9e250e447
|
|
This is an experiment to include a mv contribution from last frame to
nearest and near mv definition. Initial test showed some small though
consistent gain.
latest patch slightly better result ~.13%-~.18%.
TODO: the entropy used to encode the mode choice, i.e. the mv counts
based conditional distribution of modes should be re-collected to
reflect this change, it is expected that there is some further gain
from that.
Change-Id: Ief1e284a36d8aa56b49ae5b360c91419ec494fa4
|
|
Removal of CONFIGURE_SEGMENTATION ifdefs.
Removal of legacy support code fo the old coding mechanism.
Use local reference "xd" for MACROBLOCKD structure in
encode_frame_to_data_rate()
Moved call to choose_segmap_coding_method() out of encode
loop as the cost of segmentation is not properly accounted
in the loop anyway. If this is desirable in the future it
can be moved back. The use of this function to do all the
analysis and set the probabilities also removes the need
to track segment useage in threading code.
Change-Id: I85bc8fd63440e7176c73d26cb742698f9b70cade
|
|
Changed name and sense of segment_flag to "seg_id_predicted"
Added some additional comments and retested.
I also did some experimentation with a spatial prediction option
using a similar strategy to the temporal mode implemented.
This helps in some cases where temporal prediction is bad but
I suspect there is more overlap here with work on a larger scale
block structure and spatial correlation will likely be better
handled through that mechanism.
Next check in will remove #ifdefs and legacy mode code.
Change-Id: I3b382b65ed2a57bd7775ac0f3a01a9508a209cbc
|
|
This check in includes quite a lot of clean up and refactoring.
Most of the analysis and set up for the different coding options for the
segment map (currently simple distribution based coding or temporaly
predicted coding), has been moved to one location (the function
choose_segmap_coding_method() in segmenation.c). This code was previously
scattered around in various locations making integration with other
experiments and modification / debug more difficult.
Currently the functionality is as it was with the exception that the
prediction probabilities are now only transmitted when the temporal
prediction mode is selected.
There is still quite a bit more clean up work that will be possible
when the #ifdef is removed. Also at that time I may rename and alter
the sense of macroblock based variable "segment_flag" which indicates
(1 that the segmnet id is not predicted vs 0 that it is predicted).
I also intend to experiment with a spatial prediction mode that can be
used when coding a key frame segment map or in cases where temporal
prediction does not work well but there is spatial correlation.
In a later check in when the ifdefs have gone I may also move the call
to choose_segmap_coding_method() to just before where the bitsream is
packed (currently it is in vp8_encode_frame()) to further reduce the
possibility of clashes with other experiments and prevent it being called
on each itteration of the recode loop.
Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
|
|
Temporary check in to turn off other segment features
tests when #if CONFIG_T8X8 is set as the assignment of
MBs to differnt segments in each case will conflict.
The 8x8 code will be modified to use the new segment
feature method properly in a later check in.
Increase bits allowed for EOB end stop marker to 6 ready
for 8x8.
Change-Id: I4835bc8d3bf98e1775c3d247d778639c90b01f7f
|
|
Removal of configure #ifdefs so that segment features
always available. Removal of code supporting old
segment feature method.
Still a good deal of tidying up to do.
Change-Id: I397855f086f8c09ab1fae0a5f65d9e06d2e3e39f
|
|
This quite large check in includes the following:
Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
This is used as a basis for a simple segmentation for the normal frames
in a gf/arf group. This code also uses satd functions from Yaowu.
Adds functionality for coding the latest possible position of an EOB for
blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
Where the EOB position is 0 this acts like "skip" and the normal coding
of skip at the per mb level is disabled.
Added functions (seg_common.c) for setting and reading segment feature
elements. These may want to be optimized away at some point but while the
mecahnism is in a state of flux they provide a single location for making
changes and keep things a bit cleaner.
This is still proof of concept code. Currently the tested feature set:-
Quantizer,
Loop Filter level,
Reference frame,
Prediction Mode,
EOB end stop.
TBD:-
Add functions for setting and reading the feature data with range
and validity checking.
Handling of signed and unsigned feature data. At the moment all is assumed
to be signed and a sign bit is coded but many cannot be negative.
Correct handling of EOB feature with intra coded blocks.
Testing/trapping of legal/illegal ref frame and mode combinations.
Transform size switch plus merge and test with 8c8 DCT work
Merge and test with Sumans Segmenation coding optimizations
Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
|
|
This commit added a 3 bit index to the bitstream, the index is used to
look into the intra mode coding entropy context table. The commit uses
the mode stats to calculate the cost of transmitting modes using 8
possible entropy distributions, and selects the distribution that
provides the lowest cost to do the actual mode coding.
Initial test show this provides additional .2%~.3% gain over quantizer
adaptive intra mode coding. So the adaptive intra mode coding provides
a total of .5%(psnr) to .6% gain(ssim) combined for all-key-encoding
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: I7c41cd8bfb352bc1fe7c5da1848a58faea5ed74a
|
|
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: Iaa69241b984d4fdd8baa6d77ee78c0140f5ac00a
|
