| Age | Commit message (Collapse) | Author |
|---|
|
This check in uses the common prediction interface functions
to code reference frame.
Some updates made regarding the impact of the new code in rd loop
but there remain TODOs in this regard.
Change-Id: I9da3ed5dfdaa489e0903ab33258b0767a585567f
|
|
This does not change any functionality just modifies the code to
use the common prediction module interface for coding
the segment data.
Change-Id: Ifd43e9153573365619774a4f5572215e44fb5aa3
|
|
This function adds the common prediction modules, some data structures
and a config option but does not use them.
It also corrects a bug in clearing down the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.
Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0
|
|
Encoder side changes
Change-Id: I8921800e4fccec5e5a9e4755b80cbd472623107b
|
|
In this commit only the decoder side was updated.
Change-Id: Ia9bd58da07d1a943f028e330f0489344e62b0d02
|
|
Moved some segmentation data structures into VP8_COMMON
Change-Id: I59c6e2edf7a0176e35319936eea450027aeb3b39
|
|
Goes through set of ref frames used by each macroblock and
sets seg_lvl_ref_frame flags accordingly..
http://www.corp.google.com/~jimbankoski/no_crawl/segref.html
Change-Id: Iab7f1effd75a839b34eb310d7168692c8f105411
|
|
Picks a per segment loopfilter. Adapts the algorithm to search for
a loopfilter value for each separate segment. Further todo fix the
bias
Improvements .06 % ov psnr, .11% ssim
http://www.corp.google.com/~jimbankoski/no_crawl/segmentedpicklpf.html
Change-Id: Ic6a571c16fcd6ec0139f4de1f8061f87c6515a10
|
|
|
|
changed the token cost for 8x8 transformed macroblock used in trellisquant
from those derived from 4x4 transform coefficient distribution to those
derived from 8x8 transform coefficient distribution. Test results show
this fix help 8x8 transform based compression consistently on cif and hd
sets:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_cost8x8only.html
(avg psnr:.14% glb psnr: .17% ssim: .20%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd_cost8x8only.html
(avg psnr:.17% glb psnr: .18% ssim: .58%)
Note: To test the effect of this change, 8x8 transform was forced to be used
only on 16x16 predicted macroblocks on inter frames, the effect would be
bigger had all macroblocks been forcd to use 8x8 transform.
Change-Id: If9b7868b75357c66541f511e5ee78e4d2d4929a4
|
|
using an 8-tap filter.
The results with 3 different 8-tap filters on the derf set are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
The one that gives the most gain achieves an overall gain of about
0.6%. The results for a set of 12 hd (720p) videos are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd.html
with max gain of 0.55% with the same filter. The best filter apparently
achieves the best trade-off between pass band ripple and stop band
attenuation.
Change-Id: I919e28ae245c0493147fa0864f8c9d048a9dd530
|
|
|
|
This introduces base functions for introducing implicit segmentation.
The code that actually stores the results to the segment map isn't
here yet. This just prints out the segmentation map results
if you call it.
Uses connected component labeling technique on mbmi info so that only
if 2 mbs are horizontally or vertically touching do they get the same
segment.
vp8next - plumbing for rotation
code to produce taps for rotation ( tapify. py ), code
for predicting using rotation ( predict_rotated.c ) , code
for finding the best rotation find_rotation.c.
didn't checkin code that uses this in the codec. still work
in progress.
Fixed copyright notice
Change-Id: I450c13cfa41ab2fcb699f3897760370b4935fdf8
|
|
This commit added a set of loop filter functions for macroblocks
using 8x8 transform. First we turned off the regular loop filtering
on 4x4 block boundaries that do not exist in macroblocks using 8x8
transform. Second, we change to use the same loop filter(mask and
7 tap filter) that used for macroblock edge filtering.
Change-Id: I3a00460b7674ced116917d86812ffc32578c1d3a
|
|
This fixed a conflict introduced by the change of adding 8x8 intra
prediction modes. The 8x8 intra prediction mode code assumed the
use of 4x4 transform, and causes encoder crashes when the codec is
configured with --enable-t8x8.
Change-Id: I00cc94df63e9725377ffba9eb51be6b77fe3fcf9
|
|
commit cf561bad accidentally deleted a line of code that sets the
base_qindex for each frame, which leads to every frame is encoded
at Q of 0.
Change-Id: Ib5f8022e856bf3b3bd0d4147405e46241e3dcf2d
|
|
|
|
The commit adds a new set of loop filter for macroblock edge filtering.
The new loop filter has a mask to detect so-called "flat" regions. The
detection checks 5 pixels of each side of an edge. If the all pixels
have value with +/-1 from the edge pixel on the same side, the region
is treated as a "flat" region. For such case, a 7 tap filter is used
to change 3 pixel values on each side. The 7 taps are:
[1, 1, 1, 2, 1, 1, 1]/8
The furthest away pixels used as input are +/-5 away from edge. For
non-flat region, we fall back to old filtering. It should be noted
here that the thresholds and filter taps may require more optimization
for best possible results.
Tests on a set of hd clips showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_hd.html
(avg psnr: .83% glb psnr: .77% ssim: .82%)
Tests on derf set also showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_derf.html
(avg psnr: .24% glb psnr: .22% ssim: .48%)
Change-Id: I0855b1ff48e79e1175c20b81967137e18b2af352
|
|
Put traps to prevent two possible divide by 0 errors.
Change-Id: Ia415b945244253dcdd12f54f1f157f9ca8c94d6b
|
|
A problem can arise on static clips with force key frames where
attempts to avoid popping lead to a progressive reduction in key
frame Q that ultimately may lead to unexpected overspend against
the rate target.
The changes in this patch help to insure that in such clips the
quality of the key frames across the clip is more uniform (rather
than starting bad and getting better - especially at low target rates).
This patch also includes a fix that removes a delta on the Y2DC
when the baseline q index < 4 as this is no longer needed.
There is also a fix to try and prevent repeat single step Q adjustment in
the recode loop leading to lots of recodes, especially where the use
of forced skips as part of segmentation has made the impact of Q on
the number of bits generated much smaller.
Patch 2: Amend "last_boosted_qindex" calculation for arf overlay frames.
Change-Id: Ia1feeb79ed8ed014e4239994fcf5e58e68fd9459
|
|
|
|
In certain hardware configuration, where mmx code is enabled and
other simd (sse2/sse3) disabled, lacking of this emms caused invalid
internal stats outputs.
Change-Id: I77c61cf6e0448d3f3b8c11781aa9e42f31d231c9
|
|
Change-Id: Ifadf65026a11bdb5d39840748613880bcfb364bb
|
|
Change-Id: I6bbed8bcb2dfa3458ffc59179dfba66c92e18125
|
|
|
|
Previously, the mode context is always udpated based on stats of current
frame, when there is no count, 50% is used for both left and right branch.
However, it is observed that with such strategy, a small count or no count
at all can skew the probability distribution significantly. This commmit
changed the mode_context update strategy to prevent small counts from
skewing the probability distributions.
Tests on derf set showed a small gain: .06% in psnr and .09% in ssim
Change-Id: Ic812e64ae5f70251c170b0717f7b7fa587055488
|
|
|
|
|
|
|
|
|
|
Cleanup and switch to Q extended at low end too.
Change-Id: Ie22676bb9e961097d75dbd1d81745208b63e5f4b
|
|
This commit extends the number of Q steps to 256 from 128.
The q_trans[] array has been altered to distribute available Q index values
(using the current 64 steps available as input parameters) evenly across the
available range. This is coupled with the fact that each Q step where possible
now equates to a fixed % change in the quantizer. This may want refinement
later especially in terms of the granularity at the high quality end but is a
reasonable starting point.
Change-Id: I2aaa6874fa10ce05c958dd182947ce39f6f1eecb
|
|
High Q end extended a little.
Some clean up.
Slightly better on SSIM, Slightly worse on PSNR over derf set.
Change-Id: I3dceea8a39e11c26e1a389a40e40b86efc76d28c
|
|
Added code to support 256 index steps instead of 128 but disabled for now.
Replace hard wired table vp8cx_base_skip_false_prob[128]
Observed Qindex problem with setting minimum loop filter value.
(Experiment code using real Q in place but for now just returning 0. This has a big
beneficial effect on some clips, particularly waterfall which shows 5% ssim gain)
Change-Id: I2f7117de8adc1797164c106aa13effc900a1467e
|
|
Whilst the encoder explicitly set the segment_id to 0
when segmentation is diabled, the decoder would allow
the segment_id to persist from the previous frame.
This fix attempts to make the decoder behave the same
as the encoder by explicitly setting the segment_id to
0 in this case.
Change-Id: I65c3a05247550edb10706eb5d54d306dfb792309
|
|
mode_info_context is padded with an additional column of data, so
mode_info_stride should be used to move between rows rather than
mb_cols.
Change-Id: I598559a2cd9df1c486d64aaeccf76b76a7ecf21c
|
|
Both encoder & decoder were using mb_cols to
offset from one row of MODE_INFO structures to the next
when they should have been using mode_info_stride.
Fixing this in both encoder and decoder gives around
a 3KB size saving and 0.025dB PSNR improvement on the one
720P clip I tried.
(Also removed "index" which was being updated but not used)
Change-Id: I413bea802b142886bfcf8d8aa7f5a2f0c524fd4b
|
|
Removed a couple more fixed tables for the extended quantizer experiment
that depend on QINDEX_RANGE.
Change-Id: I2c15ffc7488c2a2b8d6504e2c4b6b2339799d117
|
|
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:
http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html
The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.
Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
|
|
|
|
update_mbgraph_frame_stats used xd->mode_info_context
before it had been setup, resulting in potentially
random accesses of uninitialized memory.
This fix allocates a local MODE_INFO structure to hold
the data generated in the function.
Change-Id: Ic9e75610008ce0e2d690e8e583c21582fee6fc45
|
|
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%
http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html
Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
|
|
Experiment with old Q range but new higher precision quantizer
and transform code.
Change-Id: Id1ff4cb433e5775d709d0133e2aec0322975c292
|
|
The commit fixed a problem by capping cpi->active_best_quality to be
smaller than cpi->worst_quality. Also fixed a few line of code that
was misplaced.
Change-Id: Ie908264b72140c669122a0afde5d886619c33474
|
|
This commit removed the macro CONFIG_MULCONTEXT, which was used to
indicate the experiment code for using separate context for altref
and normal frames. This commit made the change fully merged in.
Change-Id: I525f927f68e2365d37b340ef23b836a136a4f70b
|
|
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.
Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
|
|
vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.
http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html
Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2
|
|
The MODE_STATS macro was used to #ifdef around code for mode entropy
stats collection, this commit fixed a crash when MODE_STATS is on.
The commit also changed a number of array definitions to use defined
macros instead of hard-coded numbers.
Change-Id: I114592f53a1e44e31e455f5725f036ae6168735a
|
|
|
|
fixed issues caused by conflicts between two experiments.
Change-Id: I56a9bd69493e4850c121ea057a6233c55777c2a5
|
