diff options
Diffstat (limited to 'vp8/encoder/ratectrl.c')
-rw-r--r-- | vp8/encoder/ratectrl.c | 219 |
1 files changed, 87 insertions, 132 deletions
diff --git a/vp8/encoder/ratectrl.c b/vp8/encoder/ratectrl.c index fa9f04b15..9d778962a 100644 --- a/vp8/encoder/ratectrl.c +++ b/vp8/encoder/ratectrl.c @@ -374,62 +374,96 @@ void vp8_setup_key_frame(VP8_COMP *cpi) cpi->common.refresh_alt_ref_frame = TRUE; } -void vp8_calc_auto_iframe_target_size(VP8_COMP *cpi) + +static int estimate_bits_at_q(int frame_kind, int Q, int MBs, + double correction_factor) +{ + int Bpm = (int)(.5 + correction_factor * vp8_bits_per_mb[frame_kind][Q]); + + /* Attempt to retain reasonable accuracy without overflow. The cutoff is + * chosen such that the maximum product of Bpm and MBs fits 31 bits. The + * largest Bpm takes 20 bits. + */ + if (MBs > (1 << 11)) + return (Bpm >> BPER_MB_NORMBITS) * MBs; + else + return (Bpm * MBs) >> BPER_MB_NORMBITS; +} + + +static void calc_iframe_target_size(VP8_COMP *cpi) { // boost defaults to half second int kf_boost; + int target; // Clear down mmx registers to allow floating point in what follows vp8_clear_system_state(); //__asm emms; if (cpi->oxcf.fixed_q >= 0) { - vp8_calc_iframe_target_size(cpi); - return; - } + int Q = cpi->oxcf.key_q; - if (cpi->pass == 2) + target = estimate_bits_at_q(INTRA_FRAME, Q, cpi->common.MBs, + cpi->key_frame_rate_correction_factor); + } + else if (cpi->pass == 2) { - cpi->this_frame_target = cpi->per_frame_bandwidth; // New Two pass RC + // New Two pass RC + target = cpi->per_frame_bandwidth; + } + // First Frame is a special case + else if (cpi->common.current_video_frame == 0) + { + /* 1 Pass there is no information on which to base size so use + * bandwidth per second * fraction of the initial buffer + * level + */ + target = cpi->oxcf.starting_buffer_level / 2; + + if(target > cpi->oxcf.target_bandwidth * 3 / 2) + target = cpi->oxcf.target_bandwidth * 3 / 2; } else { + // if this keyframe was forced, use a more recent Q estimate + int Q = (cpi->common.frame_flags & FRAMEFLAGS_KEY) + ? cpi->avg_frame_qindex : cpi->ni_av_qi; + // Boost depends somewhat on frame rate kf_boost = (int)(2 * cpi->output_frame_rate - 16); // adjustment up based on q - kf_boost = kf_boost * kf_boost_qadjustment[cpi->ni_av_qi] / 100; + kf_boost = kf_boost * kf_boost_qadjustment[Q] / 100; // frame separation adjustment ( down) if (cpi->frames_since_key < cpi->output_frame_rate / 2) - kf_boost = (int)(kf_boost * cpi->frames_since_key / (cpi->output_frame_rate / 2)); + kf_boost = (int)(kf_boost + * cpi->frames_since_key / (cpi->output_frame_rate / 2)); if (kf_boost < 16) kf_boost = 16; - // Reset the active worst quality to the baseline value for key frames. - cpi->active_worst_quality = cpi->worst_quality; - - cpi->this_frame_target = ((16 + kf_boost) * cpi->per_frame_bandwidth) >> 4; + target = ((16 + kf_boost) * cpi->per_frame_bandwidth) >> 4; } - // Should the next frame be an altref frame - if (cpi->pass != 2) + if (cpi->oxcf.rc_max_intra_bitrate_pct) { - // For now Alt ref is not allowed except in 2 pass modes. - cpi->source_alt_ref_pending = FALSE; + unsigned int max_rate = cpi->per_frame_bandwidth + * cpi->oxcf.rc_max_intra_bitrate_pct / 100; - /*if ( cpi->oxcf.fixed_q == -1) - { - if ( cpi->oxcf.play_alternate && ( (cpi->last_boost/2) > (100+(AF_THRESH*cpi->frames_till_gf_update_due)) ) ) - cpi->source_alt_ref_pending = TRUE; - else - cpi->source_alt_ref_pending = FALSE; - }*/ + if (target > max_rate) + target = max_rate; } - if (0) + cpi->this_frame_target = target; + + // TODO: if we separate rate targeting from Q targetting, move this. + // Reset the active worst quality to the baseline value for key frames. + cpi->active_worst_quality = cpi->worst_quality; + +#if 0 { FILE *f; @@ -442,8 +476,10 @@ void vp8_calc_auto_iframe_target_size(VP8_COMP *cpi) fclose(f); } +#endif } + // Do the best we can to define the parameteres for the next GF based on what information we have available. static void calc_gf_params(VP8_COMP *cpi) { @@ -609,100 +645,9 @@ static void calc_gf_params(VP8_COMP *cpi) }*/ } } -/* This is equvialent to estimate_bits_at_q without the rate_correction_factor. */ -static int baseline_bits_at_q(int frame_kind, int Q, int MBs) -{ - int Bpm = vp8_bits_per_mb[frame_kind][Q]; - - /* Attempt to retain reasonable accuracy without overflow. The cutoff is - * chosen such that the maximum product of Bpm and MBs fits 31 bits. The - * largest Bpm takes 20 bits. - */ - if (MBs > (1 << 11)) - return (Bpm >> BPER_MB_NORMBITS) * MBs; - else - return (Bpm * MBs) >> BPER_MB_NORMBITS; -} - -void vp8_calc_iframe_target_size(VP8_COMP *cpi) -{ - int Q; - int Boost = 100; - - Q = (cpi->oxcf.fixed_q >= 0) ? cpi->oxcf.fixed_q : cpi->avg_frame_qindex; - - if (cpi->auto_adjust_key_quantizer == 1) - { - // If (auto_adjust_key_quantizer==1) then a lower Q is selected for key-frames. - // The enhanced Q is calculated so as to boost the key frame size by a factor - // specified in kf_boost_qadjustment. Also, can adjust based on distance - // between key frames. - - // Adjust boost based upon ambient Q - Boost = kf_boost_qadjustment[Q]; - - // Make the Key frame boost less if the seperation from the previous key frame is small - if (cpi->frames_since_key < 16) - Boost = Boost * kf_boost_seperation_adjustment[cpi->frames_since_key] / 100; - else - Boost = Boost * kf_boost_seperation_adjustment[15] / 100; - - // Apply limits on boost - if (Boost > kf_gf_boost_qlimits[Q]) - Boost = kf_gf_boost_qlimits[Q]; - else if (Boost < 120) - Boost = 120; - } - - // Keep a record of the boost that was used - cpi->last_boost = Boost; - - // Should the next frame be an altref frame - if (cpi->pass != 2) - { - // For now Alt ref is not allowed except in 2 pass modes. - cpi->source_alt_ref_pending = FALSE; - - /*if ( cpi->oxcf.fixed_q == -1) - { - if ( cpi->oxcf.play_alternate && ( (cpi->last_boost/2) > (100+(AF_THRESH*cpi->frames_till_gf_update_due)) ) ) - cpi->source_alt_ref_pending = TRUE; - else - cpi->source_alt_ref_pending = FALSE; - }*/ - } - - if (cpi->oxcf.fixed_q >= 0) - { - cpi->this_frame_target = (baseline_bits_at_q(0, Q, cpi->common.MBs) * Boost) / 100; - } - else - { - - int bits_per_mb_at_this_q ; - - if (cpi->oxcf.error_resilient_mode == 1) - { - cpi->this_frame_target = 2 * cpi->av_per_frame_bandwidth; - return; - } - - // Rate targetted scenario: - // Be careful of 32-bit OVERFLOW if restructuring the caluclation of cpi->this_frame_target - bits_per_mb_at_this_q = (int)(.5 + - cpi->key_frame_rate_correction_factor * vp8_bits_per_mb[0][Q]); - - cpi->this_frame_target = (((bits_per_mb_at_this_q * cpi->common.MBs) >> BPER_MB_NORMBITS) * Boost) / 100; - - // Reset the active worst quality to the baseline value for key frames. - if (cpi->pass < 2) - cpi->active_worst_quality = cpi->worst_quality; - } -} - -void vp8_calc_pframe_target_size(VP8_COMP *cpi) +static void calc_pframe_target_size(VP8_COMP *cpi) { int min_frame_target; int Adjustment; @@ -1194,7 +1139,9 @@ void vp8_calc_pframe_target_size(VP8_COMP *cpi) } } else - cpi->this_frame_target = (baseline_bits_at_q(1, Q, cpi->common.MBs) * cpi->last_boost) / 100; + cpi->this_frame_target = + (estimate_bits_at_q(1, Q, cpi->common.MBs, 1.0) + * cpi->last_boost) / 100; } // If there is an active ARF at this location use the minimum @@ -1316,21 +1263,6 @@ void vp8_update_rate_correction_factors(VP8_COMP *cpi, int damp_var) } } -static int estimate_bits_at_q(VP8_COMP *cpi, int Q) -{ - int Bpm = (int)(.5 + cpi->rate_correction_factor * vp8_bits_per_mb[INTER_FRAME][Q]); - - /* Attempt to retain reasonable accuracy without overflow. The cutoff is - * chosen such that the maximum product of Bpm and MBs fits 31 bits. The - * largest Bpm takes 20 bits. - */ - if (cpi->common.MBs > (1 << 11)) - return (Bpm >> BPER_MB_NORMBITS) * cpi->common.MBs; - else - return (Bpm * cpi->common.MBs) >> BPER_MB_NORMBITS; - -} - int vp8_regulate_q(VP8_COMP *cpi, int target_bits_per_frame) { @@ -1614,3 +1546,26 @@ void vp8_compute_frame_size_bounds(VP8_COMP *cpi, int *frame_under_shoot_limit, } } } + + +// return of 0 means drop frame +int vp8_pick_frame_size(VP8_COMP *cpi) +{ + VP8_COMMON *cm = &cpi->common; + + if (cm->frame_type == KEY_FRAME) + calc_iframe_target_size(cpi); + else + { + calc_pframe_target_size(cpi); + + // Check if we're dropping the frame: + if (cpi->drop_frame) + { + cpi->drop_frame = FALSE; + cpi->drop_count++; + return 0; + } + } + return 1; +} |