Adding vp9_speed_features.{h, c}.

Change-Id: I7d9874da8ff78a2d7e0cf11073af9c30538bc9a6

1 files changed, 1 insertions, 292 deletions

diff --git a/vp9/encoder/vp9_onyx_int.h b/vp9/encoder/vp9_onyx_int.h
index 582fa0ea3..6dbe4d474 100644
--- a/vp9/encoder/vp9_onyx_int.h
+++ b/vp9/encoder/vp9_onyx_int.h
@@ -31,6 +31,7 @@
 #include "vp9/encoder/vp9_mcomp.h"
 #include "vp9/encoder/vp9_quantize.h"
 #include "vp9/encoder/vp9_ratectrl.h"
+#include "vp9/encoder/vp9_speed_features.h"
 #include "vp9/encoder/vp9_svc_layercontext.h"
 #include "vp9/encoder/vp9_tokenize.h"
 #include "vp9/encoder/vp9_variance.h"
@@ -115,75 +116,6 @@ typedef enum {
 } THR_MODES_SUB8X8;
 
 typedef enum {
-  DIAMOND = 0,
-  NSTEP = 1,
-  HEX = 2,
-  BIGDIA = 3,
-  SQUARE = 4,
-  FAST_HEX = 5,
-  FAST_DIAMOND = 6
-} SEARCH_METHODS;
-
-typedef enum {
-  USE_FULL_RD = 0,
-  USE_LARGESTINTRA,
-  USE_LARGESTINTRA_MODELINTER,
-  USE_LARGESTALL
-} TX_SIZE_SEARCH_METHOD;
-
-typedef enum {
-  NOT_IN_USE = 0,
-  RELAXED_NEIGHBORING_MIN_MAX = 1,
-  STRICT_NEIGHBORING_MIN_MAX = 2
-} AUTO_MIN_MAX_MODE;
-
-typedef enum {
-  // Terminate search early based on distortion so far compared to
-  // qp step, distortion in the neighborhood of the frame, etc.
-  FLAG_EARLY_TERMINATE = 1 << 0,
-
-  // Skips comp inter modes if the best so far is an intra mode.
-  FLAG_SKIP_COMP_BESTINTRA = 1 << 1,
-
-  // Skips comp inter modes if the best single intermode so far does
-  // not have the same reference as one of the two references being
-  // tested.
-  FLAG_SKIP_COMP_REFMISMATCH = 1 << 2,
-
-  // Skips oblique intra modes if the best so far is an inter mode.
-  FLAG_SKIP_INTRA_BESTINTER = 1 << 3,
-
-  // Skips oblique intra modes  at angles 27, 63, 117, 153 if the best
-  // intra so far is not one of the neighboring directions.
-  FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4,
-
-  // Skips intra modes other than DC_PRED if the source variance is small
-  FLAG_SKIP_INTRA_LOWVAR = 1 << 5,
-} MODE_SEARCH_SKIP_LOGIC;
-
-typedef enum {
-  SUBPEL_TREE = 0,
-  // Other methods to come
-} SUBPEL_SEARCH_METHODS;
-
-typedef enum {
-  LAST_FRAME_PARTITION_OFF = 0,
-  LAST_FRAME_PARTITION_LOW_MOTION = 1,
-  LAST_FRAME_PARTITION_ALL = 2
-} LAST_FRAME_PARTITION_METHOD;
-
-typedef enum {
-  // No recode.
-  DISALLOW_RECODE = 0,
-  // Allow recode for KF and exceeding maximum frame bandwidth.
-  ALLOW_RECODE_KFMAXBW = 1,
-  // Allow recode only for KF/ARF/GF frames.
-  ALLOW_RECODE_KFARFGF = 2,
-  // Allow recode for all frames based on bitrate constraints.
-  ALLOW_RECODE = 3,
-} RECODE_LOOP_TYPE;
-
-typedef enum {
   // encode_breakout is disabled.
   ENCODE_BREAKOUT_DISABLED = 0,
   // encode_breakout is enabled.
@@ -193,227 +125,6 @@ typedef enum {
 } ENCODE_BREAKOUT_TYPE;
 
 typedef enum {
-  // Search partitions using RD/NONRD criterion
-  SEARCH_PARTITION = 0,
-
-  // Always use a fixed size partition
-  FIXED_PARTITION = 1,
-
-  // Use a fixed size partition in every 64X64 SB, where the size is
-  // determined based on source variance
-  VAR_BASED_FIXED_PARTITION = 2,
-
-  REFERENCE_PARTITION = 3,
-
-  // Use an arbitrary partitioning scheme based on source variance within
-  // a 64X64 SB
-  VAR_BASED_PARTITION
-} PARTITION_SEARCH_TYPE;
-
-typedef enum {
-  // Try the full image with different values.
-  LPF_PICK_FROM_FULL_IMAGE,
-  // Try a small portion of the image with different values.
-  LPF_PICK_FROM_SUBIMAGE,
-  // Estimate the level based on quantizer and frame type
-  LPF_PICK_FROM_Q,
-} LPF_PICK_METHOD;
-
-typedef struct {
-  // Frame level coding parameter update
-  int frame_parameter_update;
-
-  // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc).
-  SEARCH_METHODS search_method;
-
-  RECODE_LOOP_TYPE recode_loop;
-
-  // Subpel_search_method can only be subpel_tree which does a subpixel
-  // logarithmic search that keeps stepping at 1/2 pixel units until
-  // you stop getting a gain, and then goes on to 1/4 and repeats
-  // the same process. Along the way it skips many diagonals.
-  SUBPEL_SEARCH_METHODS subpel_search_method;
-
-  // Maximum number of steps in logarithmic subpel search before giving up.
-  int subpel_iters_per_step;
-
-  // Control when to stop subpel search
-  int subpel_force_stop;
-
-  // This parameter controls the number of steps we'll do in a diamond
-  // search.
-  int max_step_search_steps;
-
-  // This parameter controls which step in the n-step process we start at.
-  // It's changed adaptively based on circumstances.
-  int reduce_first_step_size;
-
-  // If this is set to 1, we limit the motion search range to 2 times the
-  // largest motion vector found in the last frame.
-  int auto_mv_step_size;
-
-  // Trellis (dynamic programming) optimization of quantized values (+1, 0).
-  int optimize_coefficients;
-
-  // Always set to 0. If on it enables 0 cost background transmission
-  // (except for the initial transmission of the segmentation). The feature is
-  // disabled because the addition of very large block sizes make the
-  // backgrounds very to cheap to encode, and the segmentation we have
-  // adds overhead.
-  int static_segmentation;
-
-  // If 1 we iterate finding a best reference for 2 ref frames together - via
-  // a log search that iterates 4 times (check around mv for last for best
-  // error of combined predictor then check around mv for alt). If 0 we
-  // we just use the best motion vector found for each frame by itself.
-  int comp_inter_joint_search_thresh;
-
-  // This variable is used to cap the maximum number of times we skip testing a
-  // mode to be evaluated. A high value means we will be faster.
-  int adaptive_rd_thresh;
-
-  // Enables skipping the reconstruction step (idct, recon) in the
-  // intermediate steps assuming the last frame didn't have too many intra
-  // blocks and the q is less than a threshold.
-  int skip_encode_sb;
-  int skip_encode_frame;
-  // Speed feature to allow or disallow skipping of recode at block
-  // level within a frame.
-  int allow_skip_recode;
-
-  // This variable allows us to reuse the last frames partition choices
-  // (64x64 v 32x32 etc) for this frame. It can be set to only use the last
-  // frame as a starting point in low motion scenes or always use it. If set
-  // we use last partitioning_redo frequency to determine how often to redo
-  // the partitioning from scratch. Adjust_partitioning_from_last_frame
-  // enables us to adjust up or down one partitioning from the last frames
-  // partitioning.
-  LAST_FRAME_PARTITION_METHOD use_lastframe_partitioning;
-
-  // Determine which method we use to determine transform size. We can choose
-  // between options like full rd, largest for prediction size, largest
-  // for intra and model coefs for the rest.
-  TX_SIZE_SEARCH_METHOD tx_size_search_method;
-
-  // Low precision 32x32 fdct keeps everything in 16 bits and thus is less
-  // precise but significantly faster than the non lp version.
-  int use_lp32x32fdct;
-
-  // TODO(JBB): remove this as its no longer used.
-
-  // After looking at the first set of modes (set by index here), skip
-  // checking modes for reference frames that don't match the reference frame
-  // of the best so far.
-  int mode_skip_start;
-
-  // TODO(JBB): Remove this.
-  int reference_masking;
-
-  PARTITION_SEARCH_TYPE partition_search_type;
-
-  // Used if partition_search_type = FIXED_SIZE_PARTITION
-  BLOCK_SIZE always_this_block_size;
-
-  // Skip rectangular partition test when partition type none gives better
-  // rd than partition type split.
-  int less_rectangular_check;
-
-  // Disable testing non square partitions. (eg 16x32)
-  int use_square_partition_only;
-
-  // Sets min and max partition sizes for this 64x64 region based on the
-  // same 64x64 in last encoded frame, and the left and above neighbor.
-  AUTO_MIN_MAX_MODE auto_min_max_partition_size;
-
-  // Min and max partition size we enable (block_size) as per auto
-  // min max, but also used by adjust partitioning, and pick_partitioning.
-  BLOCK_SIZE min_partition_size;
-  BLOCK_SIZE max_partition_size;
-
-  // Whether or not we allow partitions one smaller or one greater than the last
-  // frame's partitioning. Only used if use_lastframe_partitioning is set.
-  int adjust_partitioning_from_last_frame;
-
-  // How frequently we re do the partitioning from scratch. Only used if
-  // use_lastframe_partitioning is set.
-  int last_partitioning_redo_frequency;
-
-  // Disables sub 8x8 blocksizes in different scenarios: Choices are to disable
-  // it always, to allow it for only Last frame and Intra, disable it for all
-  // inter modes or to enable it always.
-  int disable_split_mask;
-
-  // TODO(jingning): combine the related motion search speed features
-  // This allows us to use motion search at other sizes as a starting
-  // point for this motion search and limits the search range around it.
-  int adaptive_motion_search;
-
-  // Allows sub 8x8 modes to use the prediction filter that was determined
-  // best for 8x8 mode. If set to 0 we always re check all the filters for
-  // sizes less than 8x8, 1 means we check all filter modes if no 8x8 filter
-  // was selected, and 2 means we use 8 tap if no 8x8 filter mode was selected.
-  int adaptive_pred_interp_filter;
-
-  // Search through variable block partition types in non-RD mode decision
-  // encoding process for RTC.
-  int partition_check;
-
-  // Implements various heuristics to skip searching modes
-  // The heuristics selected are based on  flags
-  // defined in the MODE_SEARCH_SKIP_HEURISTICS enum
-  unsigned int mode_search_skip_flags;
-
-  // A source variance threshold below which the split mode is disabled
-  unsigned int disable_split_var_thresh;
-
-  // A source variance threshold below which filter search is disabled
-  // Choose a very large value (UINT_MAX) to use 8-tap always
-  unsigned int disable_filter_search_var_thresh;
-
-  // These bit masks allow you to enable or disable intra modes for each
-  // transform size separately.
-  int intra_y_mode_mask[TX_SIZES];
-  int intra_uv_mode_mask[TX_SIZES];
-
-  // This variable enables an early break out of mode testing if the model for
-  // rd built from the prediction signal indicates a value that's much
-  // higher than the best rd we've seen so far.
-  int use_rd_breakout;
-
-  // This enables us to use an estimate for intra rd based on dc mode rather
-  // than choosing an actual uv mode in the stage of encoding before the actual
-  // final encode.
-  int use_uv_intra_rd_estimate;
-
-  // This feature controls how the loop filter level is determined.
-  LPF_PICK_METHOD lpf_pick;
-
-  // This feature limits the number of coefficients updates we actually do
-  // by only looking at counts from 1/2 the bands.
-  int use_fast_coef_updates;  // 0: 2-loop, 1: 1-loop, 2: 1-loop reduced
-
-  // This flag controls the use of non-RD mode decision.
-  int use_nonrd_pick_mode;
-
-  // This variable sets the encode_breakout threshold. Currently, it is only
-  // enabled in real time mode.
-  int encode_breakout_thresh;
-
-  // A binary mask indicating if NEARESTMV, NEARMV, ZEROMV, NEWMV
-  // modes are disabled in order from LSB to MSB for each BLOCK_SIZE.
-  int disable_inter_mode_mask[BLOCK_SIZES];
-
-  // This feature controls whether we do the expensive context update and
-  // calculation in the rd coefficient costing loop.
-  int use_fast_coef_costing;
-
-  // This variable controls the maximum block size where intra blocks can be
-  // used in inter frames.
-  // TODO(aconverse): Fold this into one of the other many mode skips
-  BLOCK_SIZE max_intra_bsize;
-} SPEED_FEATURES;
-
-typedef enum {
   NORMAL      = 0,
   FOURFIVE    = 1,
   THREEFIVE   = 2,
@@ -888,8 +599,6 @@ static INLINE YV12_BUFFER_CONFIG *get_ref_frame_buffer(
       .buf;
 }
 
-void vp9_set_speed_features(VP9_COMP *cpi);
-
 static INLINE int get_token_alloc(int mb_rows, int mb_cols) {
   // TODO(JBB): make this work for alpha channel and double check we can't
   // exceed this token count if we have a 32x32 transform crossing a boundary