| Age | Commit message (Collapse) | Author |
|---|
|
Currently, if the temporary file creation fails the create_tz_file
function returns NULL. The NULL pointer is then passed to setenv which
causes a SIGSEGV. Rather than failing with a SIGSEGV print a warning
and exit.
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
/bin/bash instead
(FYI, this is a repost of
https://sourceware.org/pipermail/libc-alpha/2019-July/105035.html now
that FSF papers have been signed and confirmed on FSF side).
This trivial patch attemps to fix BZ 24106. Basically the bash locally
used when building glibc on the host shall not leak on the installed
glibc, as the system where it is installed might be different and use
another bash location.
So I have looked for all occurences of @BASH@ or $(BASH) in installed
files, and replaced it by /bin/bash. This was suggested by Florian
Weimer in the bug report.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Commit 3bc4186c7a9, tzdata changed the zdump installation
to bin directory, which creates duplicates of zdump in the
Root filesystem.
|
|
This patch updates files coming from tzcode to tzcode 2020a.
This is mostly for better support for Internet RFC 8536, by adding
support to zic for the Expires line (new to tzcode 2020a), the -b
option (new to 2019b) and the -r option (new to 2019a).
One trivial change to other glibc was needed.
* time/tzfile.c (__tzfile_read): Adjust to tzcode private.h renaming.
* timezone/private.h, timezone/tzfile.h, timezone/version:
* timezone/zdump.c, timezone/zic.c: Update from tzcode 2020a.
|
|
* timezone/version: New file, also taken from tzcode2018i.
* timezone/README: Reword so that people needn't paw through
old ChangeLog files to see which version we're using, a process
that is error-prone. Update an obsolescent URL.
|
|
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
This patch updates files coming from tzcode to the versions in tzcode
2018i. No changes elsewhere in glibc were needed.
Tested for x86_64.
* timezone/zdump.c: Update from tzcode 2018i.
* timezone/zic.c: Likewise.
|
|
This patch updates files coming from tzcode to the versions in tzcode
2018g. No changes elsewhere in glibc were needed.
Tested for x86_64.
* timezone/private.h: Update from tzcode 2018g.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
|
|
This removes all overrides of TIMEOUT that are less than or equal to the
default timeout.
|
|
Otherwise, these tests fills up the entire disk (or just run very
slowly and eventually time out).
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
Replace = with += in CFLAGS-xxx.c and CPPFLAGS-xxx.c to allow Makefile
under sysdeps to define CFLAGS-xx.c and CPPFLAGS-xxx.c.
* argp/Makefile (CFLAGS-argp-help.c): Replace = with +=.
(CFLAGS-argp-parse.c): Likewise.
(CFLAGS-argp-fmtstream.c): Likewise.
* crypt/Makefile (CPPFLAGS-sha256-crypt.c): Likewise.
(CPPFLAGS-sha512-crypt.c): Likewise.
(CPPFLAGS-md5-crypt.c): Likewise.
* debug/Makefile (CFLAGS-stack_chk_fail.c): Likewise.
(CFLAGS-stack_chk_fail_local.c): Likewise.
(CFLAGS-backtrace.c): Likewise.
(CFLAGS-sprintf_chk.c): Likewise.
(CFLAGS-snprintf_chk.c): Likewise.
(CFLAGS-vsprintf_chk.c): Likewise.
(CFLAGS-vsnprintf_chk.c): Likewise.
(CFLAGS-asprintf_chk.c): Likewise.
(CFLAGS-vasprintf_chk.c): Likewise.
(CFLAGS-obprintf_chk.c): Likewise.
(CFLAGS-dprintf_chk.c): Likewise.
(CFLAGS-vdprintf_chk.c): Likewise.
(CFLAGS-printf_chk.c): Likewise.
(CFLAGS-fprintf_chk.c): Likewise.
(CFLAGS-vprintf_chk.c): Likewise.
(CFLAGS-vfprintf_chk.c): Likewise.
(CFLAGS-gets_chk.c): Likewise.
(CFLAGS-fgets_chk.c): Likewise.
(CFLAGS-fgets_u_chk.c): Likewise.
(CFLAGS-fread_chk.c): Likewise.
(CFLAGS-fread_u_chk.c): Likewise.
(CFLAGS-swprintf_chk.c): Likewise.
(CFLAGS-vswprintf_chk.c): Likewise.
(CFLAGS-wprintf_chk.c): Likewise.
(CFLAGS-fwprintf_chk.c): Likewise.
(CFLAGS-vwprintf_chk.c): Likewise.
(CFLAGS-vfwprintf_chk.c): Likewise.
(CFLAGS-fgetws_chk.c): Likewise.
(CFLAGS-fgetws_u_chk.c): Likewise.
(CFLAGS-read_chk.c): Likewise.
(CFLAGS-pread_chk.c): Likewise.
(CFLAGS-pread64_chk.c): Likewise.
(CFLAGS-recv_chk.c): Likewise.
(CFLAGS-recvfrom_chk.c): Likewise.
(CFLAGS-tst-longjmp_chk.c): Likewise.
(CPPFLAGS-tst-longjmp_chk.c): Likewise.
(CFLAGS-tst-longjmp_chk2.c): Likewise.
(CPPFLAGS-tst-longjmp_chk2.c): Likewise.
(CFLAGS-tst-longjmp_chk3.c): Likewise.
(CPPFLAGS-tst-longjmp_chk3.c): Likewise.
(CFLAGS-tst-chk1.c): Likewise.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
(CFLAGS-tst-ssp-1.c): Likewise.
* dirent/Makefile (CFLAGS-scandir.c): Likewise.
(CFLAGS-scandir64.c): Likewise.
(CFLAGS-scandir-tail.c): Likewise.
(CFLAGS-scandir64-tail.c): Likewise.
* elf/Makefile (CPPFLAGS-dl-tunables.c): Likewise.
(CFLAGS-dl-tunables.c): Likewise.
(CFLAGS-dl-runtime.c): Likewise.
(CFLAGS-dl-lookup.c): Likewise.
(CFLAGS-dl-iterate-phdr.c): Likewise.
(CFLAGS-vismain.c): Likewise.
(CFLAGS-tst-linkall-static.c): Likewise.
(CFLAGS-tst-linkall-static.c): Likewise.
(CPPFLAGS-dl-load.c): Likewise.
(CFLAGS-ldconfig.c): Likewise.
(CFLAGS-dl-cache.c): Likewise.
(CFLAGS-cache.c): Likewise.
(CFLAGS-rtld.c): Likewise.
(CFLAGS-multiload.c): Likewise.
(CFLAGS-filtmod1.c): Likewise.
(CFLAGS-tst-align.c): Likewise.
(CFLAGS-tst-align2.c): Likewise.
(CFLAGS-tst-alignmod.c): Likewise.
(CFLAGS-tst-alignmod2.c): Likewise.
(CPPFLAGS-tst-execstack.c): Likewise.
(CFLAGS-tst-ptrguard1-static.c): Likewise.
(CFLAGS-tst-latepthreadmod.c): Likewise.
* grp/Makefile (CFLAGS-getgrgid_r.c): Likewise.
(CFLAGS-getgrnam_r.c): Likewise.
(CFLAGS-getgrent_r.c): Likewise.
(CFLAGS-getgrent.c): Likewise.
(CFLAGS-fgetgrent.c): Likewise.
(CFLAGS-fgetgrent_r.c): Likewise.
(CFLAGS-putgrent.c): Likewise.
(CFLAGS-initgroups.c): Likewise.
(CFLAGS-getgrgid.c): Likewise.
* gshadow/Makefile (CFLAGS-getsgent_r.c): Likewise.
(CFLAGS-getsgent.c): Likewise.
(CFLAGS-fgetsgent.c): Likewise.
(CFLAGS-fgetsgent_r.c): Likewise.
(CFLAGS-putsgent.c): Likewise.
(CFLAGS-getsgnam.c): Likewise.
(CFLAGS-getsgnam_r.c): Likewise.
* iconv/Makefile (CFLAGS-iconv_prog.c): Likewise.
(CFLAGS-iconv_charmap.c): Likewise.
(CFLAGS-dummy-repertoire.c): Likewise.
(CFLAGS-charmap.c): Likewise.
(CFLAGS-linereader.c): Likewise.
(CFLAGS-simple-hash.c): Likewise.
(CFLAGS-gconv_conf.c): Likewise.
(CFLAGS-iconvconfig.c): Likewise.
* inet/Makefile (CFLAGS-gethstbyad_r.c): Likewise.
(CFLAGS-gethstbyad.c): Likewise.
(CFLAGS-gethstbynm_r.c): Likewise.
(CFLAGS-gethstbynm.c): Likewise.
(CFLAGS-gethstbynm2_r.c): Likewise.
(CFLAGS-gethstbynm2.c): Likewise.
(CFLAGS-gethstent_r.c): Likewise.
(CFLAGS-gethstent.c): Likewise.
(CFLAGS-rcmd.c): Likewise.
(CFLAGS-getnetbynm_r.c): Likewise.
(CFLAGS-getnetbynm.c): Likewise.
(CFLAGS-getnetbyad_r.c): Likewise.
(CFLAGS-getnetbyad.c): Likewise.
(CFLAGS-getnetent_r.c): Likewise.
(CFLAGS-getnetent.c): Likewise.
(CFLAGS-getaliasent_r.c): Likewise.
(CFLAGS-getaliasent.c): Likewise.
(CFLAGS-getrpcent_r.c): Likewise.
(CFLAGS-getrpcent.c): Likewise.
(CFLAGS-getservent_r.c): Likewise.
(CFLAGS-getservent.c): Likewise.
(CFLAGS-getprtent_r.c): Likewise.
(CFLAGS-getprtent.c): Likewise.
(CFLAGS-either_ntoh.c): Likewise.
(CFLAGS-either_hton.c): Likewise.
(CFLAGS-getnetgrent.c): Likewise.
(CFLAGS-getnetgrent_r.c): Likewise.
(CFLAGS-tst-checks-posix.c): Likewise.
(CFLAGS-tst-sockaddr.c): Likewise.
* intl/Makefile (CFLAGS-tst-gettext.c): Likewise.
(CFLAGS-tst-translit.c): Likewise.
(CFLAGS-tst-gettext2.c): Likewise.
(CFLAGS-tst-codeset.c): Likewise.
(CFLAGS-tst-gettext3.c): Likewise.
(CFLAGS-tst-gettext4.c): Likewise.
(CFLAGS-tst-gettext5.c): Likewise.
(CFLAGS-tst-gettext6.c): Likewise.
* io/Makefile (CFLAGS-open.c): Likewise.
(CFLAGS-open64.c): Likewise.
(CFLAGS-creat.c): Likewise.
(CFLAGS-creat64.c): Likewise.
(CFLAGS-fcntl.c): Likewise.
(CFLAGS-poll.c): Likewise.
(CFLAGS-ppoll.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-statfs.c): Likewise.
(CFLAGS-fstatfs.c): Likewise.
(CFLAGS-statvfs.c): Likewise.
(CFLAGS-fstatvfs.c): Likewise.
(CFLAGS-fts.c): Likewise.
(CFLAGS-fts64.c): Likewise.
(CFLAGS-ftw.c): Likewise.
(CFLAGS-ftw64.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-posix_fallocate.c): Likewise.
(CFLAGS-posix_fallocate64.c): Likewise.
(CFLAGS-fallocate.c): Likewise.
(CFLAGS-fallocate64.c): Likewise.
(CFLAGS-read.c): Likewise.
(CFLAGS-write.c): Likewise.
(CFLAGS-test-stat.c): Likewise.
(CFLAGS-test-lfs.c): Likewise.
* libio/Makefile (CFLAGS-fileops.c): Likewise.
(CFLAGS-fputc.c): Likewise.
(CFLAGS-fputwc.c): Likewise.
(CFLAGS-freopen64.c): Likewise.
(CFLAGS-freopen.c): Likewise.
(CFLAGS-fseek.c): Likewise.
(CFLAGS-fseeko64.c): Likewise.
(CFLAGS-fseeko.c): Likewise.
(CFLAGS-ftello64.c): Likewise.
(CFLAGS-ftello.c): Likewise.
(CFLAGS-fwide.c): Likewise.
(CFLAGS-genops.c): Likewise.
(CFLAGS-getc.c): Likewise.
(CFLAGS-getchar.c): Likewise.
(CFLAGS-getwc.c): Likewise.
(CFLAGS-getwchar.c): Likewise.
(CFLAGS-iofclose.c): Likewise.
(CFLAGS-iofflush.c): Likewise.
(CFLAGS-iofgetpos64.c): Likewise.
(CFLAGS-iofgetpos.c): Likewise.
(CFLAGS-iofgets.c): Likewise.
(CFLAGS-iofgetws.c): Likewise.
(CFLAGS-iofputs.c): Likewise.
(CFLAGS-iofputws.c): Likewise.
(CFLAGS-iofread.c): Likewise.
(CFLAGS-iofsetpos64.c): Likewise.
(CFLAGS-iofsetpos.c): Likewise.
(CFLAGS-ioftell.c): Likewise.
(CFLAGS-iofwrite.c): Likewise.
(CFLAGS-iogetdelim.c): Likewise.
(CFLAGS-iogetline.c): Likewise.
(CFLAGS-iogets.c): Likewise.
(CFLAGS-iogetwline.c): Likewise.
(CFLAGS-ioputs.c): Likewise.
(CFLAGS-ioseekoff.c): Likewise.
(CFLAGS-ioseekpos.c): Likewise.
(CFLAGS-iosetbuffer.c): Likewise.
(CFLAGS-iosetvbuf.c): Likewise.
(CFLAGS-ioungetc.c): Likewise.
(CFLAGS-ioungetwc.c): Likewise.
(CFLAGS-oldfileops.c): Likewise.
(CFLAGS-oldiofclose.c): Likewise.
(CFLAGS-oldiofgetpos64.c): Likewise.
(CFLAGS-oldiofgetpos.c): Likewise.
(CFLAGS-oldiofsetpos64.c): Likewise.
(CFLAGS-oldiofsetpos.c): Likewise.
(CFLAGS-peekc.c): Likewise.
(CFLAGS-putc.c): Likewise.
(CFLAGS-putchar.c): Likewise.
(CFLAGS-putwc.c): Likewise.
(CFLAGS-putwchar.c): Likewise.
(CFLAGS-rewind.c): Likewise.
(CFLAGS-wfileops.c): Likewise.
(CFLAGS-wgenops.c): Likewise.
(CFLAGS-oldiofopen.c): Likewise.
(CFLAGS-iofopen.c): Likewise.
(CFLAGS-iofopen64.c): Likewise.
(CFLAGS-oldtmpfile.c): Likewise.
(CFLAGS-tst_putwc.c): Likewise.
* locale/Makefile (CFLAGS-md5.c): Likewise.
(CFLAGS-charmap.c): Likewise.
(CFLAGS-locfile.c): Likewise.
(CFLAGS-charmap-dir.c): Likewise.
* login/Makefile (CFLAGS-grantpt.c): Likewise.
(CFLAGS-getpt.c): Likewise.
(CFLAGS-pt_chown.c): Likewise.
* malloc/Makefile (CFLAGS-mcheck-init.c): Likewise.
(CFLAGS-obstack.c): Likewise.
* math/Makefile (CFLAGS-test-tgmath3.c): Likewise.
(CFLAGS-test-double-vlen4-wrappers.c): Likewise.
(CFLAGS-test-double-vlen8-wrappers.c): Likewise.
(CFLAGS-test-float-vlen8-wrappers.c): Likewise.
(CFLAGS-test-float-vlen16-wrappers.c): Likewise.
(CFLAGS-test-tgmath.c): Likewise.
(CFLAGS-test-tgmath2.c): Likewise.
(CFLAGS-test-tgmath-ret.c): Likewise.
(CFLAGS-test-powl.c): Likewise.
(CFLAGS-test-snan.c): Likewise.
(CFLAGS-test-signgam-finite.c): Likewise.
(CFLAGS-test-signgam-finite-c99.c): Likewise.
(CFLAGS-test-signgam-finite-c11.c): Likewise.
(CFLAGS-test-signgam-uchar.c): Likewise.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
(CFLAGS-test-math-cxx11.cc): Likewise.
(CFLAGS-test-math-isinff.cc): Likewise.
(CFLAGS-test-math-iszero.cc): Likewise.
(CFLAGS-test-math-issignaling.cc): Likewise.
(CFLAGS-test-math-iscanonical.cc): Likewise.
(CFLAGS-test-iszero-excess-precision.c): Likewise.
(CFLAGS-test-iseqsig-excess-precision.c): Likewise.
(CFLAGS-test-flt-eval-method.c): Likewise.
(CFLAGS-test-fe-snans-always-signal.c): Likewise.
(CFLAGS-test-finite-macros.c): Likewise.
* misc/Makefile (CFLAGS-select.c): Likewise.
(CFLAGS-tsearch.c): Likewise.
(CFLAGS-lsearch.c): Likewise.
(CFLAGS-pselect.c): Likewise.
(CFLAGS-readv.c): Likewise.
(CFLAGS-writev.c): Likewise.
(CFLAGS-preadv.c): Likewise.
(CFLAGS-preadv64.c): Likewise.
(CFLAGS-pwritev.c): Likewise.
(CFLAGS-pwritev64.c): Likewise.
(CFLAGS-preadv2.c): Likewise.
(CFLAGS-preadv64v2.c): Likewise.
(CFLAGS-pwritev2.c): Likewise.
(CFLAGS-pwritev64v2.c): Likewise.
(CFLAGS-usleep.c): Likewise.
(CFLAGS-syslog.c): Likewise.
(CFLAGS-error.c): Likewise.
(CFLAGS-getpass.c): Likewise.
(CFLAGS-mkstemp.c): Likewise.
(CFLAGS-mkstemp64.c): Likewise.
(CFLAGS-getsysstats.c): Likewise.
(CFLAGS-getusershell.c): Likewise.
(CFLAGS-err.c): Likewise.
(CFLAGS-tst-tsearch.c): Likewise.
(CFLAGS-msync.c): Likewise.
(CFLAGS-fdatasync.c): Likewise.
(CFLAGS-fsync.c): Likewise.
* nptl/Makefile (CFLAGS-nptl-init.c): Likewise.
(CFLAGS-unwind.c): Likewise.
(CFLAGS-unwind-forcedunwind.c): Likewise.
(CFLAGS-pthread_cancel.c): Likewise.
(CFLAGS-pthread_setcancelstate.c): Likewise.
(CFLAGS-pthread_setcanceltype.c): Likewise.
(CFLAGS-cancellation.c): Likewise.
(CFLAGS-libc-cancellation.c): Likewise.
(CFLAGS-pthread_exit.c): Likewise.
(CFLAGS-forward.c): Likewise.
(CFLAGS-pthread_testcancel.c): Likewise.
(CFLAGS-pthread_join.c): Likewise.
(CFLAGS-pthread_timedjoin.c): Likewise.
(CFLAGS-pthread_once.c): Likewise.
(CFLAGS-pthread_cond_wait.c): Likewise.
(CFLAGS-sem_wait.c): Likewise.
(CFLAGS-sem_timedwait.c): Likewise.
(CFLAGS-fcntl.c): Likewise.
(CFLAGS-lockf.c): Likewise.
(CFLAGS-pread.c): Likewise.
(CFLAGS-pread64.c): Likewise.
(CFLAGS-pwrite.c): Likewise.
(CFLAGS-pwrite64.c): Likewise.
(CFLAGS-wait.c): Likewise.
(CFLAGS-waitpid.c): Likewise.
(CFLAGS-sigwait.c): Likewise.
(CFLAGS-msgrcv.c): Likewise.
(CFLAGS-msgsnd.c): Likewise.
(CFLAGS-tcdrain.c): Likewise.
(CFLAGS-open.c): Likewise.
(CFLAGS-open64.c): Likewise.
(CFLAGS-pause.c): Likewise.
(CFLAGS-recv.c): Likewise.
(CFLAGS-send.c): Likewise.
(CFLAGS-accept.c): Likewise.
(CFLAGS-sendto.c): Likewise.
(CFLAGS-connect.c): Likewise.
(CFLAGS-recvfrom.c): Likewise.
(CFLAGS-recvmsg.c): Likewise.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-close.c): Likewise.
(CFLAGS-read.c): Likewise.
(CFLAGS-write.c): Likewise.
(CFLAGS-nanosleep.c): Likewise.
(CFLAGS-sigsuspend.c): Likewise.
(CFLAGS-msync.c): Likewise.
(CFLAGS-fdatasync.c): Likewise.
(CFLAGS-fsync.c): Likewise.
(CFLAGS-pt-system.c): Likewise.
(CFLAGS-tst-cleanup2.c): Likewise.
(CFLAGS-tst-cleanupx2.c): Likewise.
(CFLAGS-flockfile.c): Likewise.
(CFLAGS-ftrylockfile.c): Likewise.
(CFLAGS-funlockfile.c): Likewise.
(CFLAGS-tst-initializers1.c): Likewise.
(CFLAGS-tst-initializers1-c89.c): Likewise.
(CFLAGS-tst-initializers1-c99.c): Likewise.
(CFLAGS-tst-initializers1-c11.c): Likewise.
(CFLAGS-tst-initializers1-gnu89.c): Likewise.
(CFLAGS-tst-initializers1-gnu99.c): Likewise.
(CFLAGS-tst-initializers1-gnu11.c): Likewise.
* nscd/Makefile (CFLAGS-nscd_getpw_r.c): Likewise.
(CFLAGS-nscd_getgr_r.c): Likewise.
(CFLAGS-nscd_gethst_r.c): Likewise.
(CFLAGS-nscd_getai.c): Likewise.
(CFLAGS-nscd_initgroups.c): Likewise.
* posix/Makefile (CFLAGS-getaddrinfo.c): Likewise.
(CFLAGS-pause.c): Likewise.
(CFLAGS-pread.c): Likewise.
(CFLAGS-pread64.c): Likewise.
(CFLAGS-pwrite.c): Likewise.
(CFLAGS-pwrite64.c): Likewise.
(CFLAGS-sleep.c): Likewise.
(CFLAGS-wait.c): Likewise.
(CFLAGS-waitid.c): Likewise.
(CFLAGS-waitpid.c): Likewise.
(CFLAGS-getopt.c): Likewise.
(CFLAGS-wordexp.c): Likewise.
(CFLAGS-sysconf.c): Likewise.
(CFLAGS-pathconf.c): Likewise.
(CFLAGS-fpathconf.c): Likewise.
(CFLAGS-spawn.c): Likewise.
(CFLAGS-spawnp.c): Likewise.
(CFLAGS-spawni.c): Likewise.
(CFLAGS-glob.c): Likewise.
(CFLAGS-glob64.c): Likewise.
(CFLAGS-getconf.c): Likewise.
(CFLAGS-nanosleep.c): Likewise.
* pwd/Makefile (CFLAGS-getpwent_r.c): Likewise.
(CFLAGS-getpwent.c): Likewise.
(CFLAGS-getpw.c): Likewise.
(CFLAGS-fgetpwent_r.c): Likewise.
* resolv/Makefile (CFLAGS-res_hconf.c): Likewise.
* rt/Makefile (CFLAGS-aio_suspend.c): Likewise.
(CFLAGS-mq_timedreceive.c): Likewise.
(CFLAGS-mq_timedsend.c): Likewise.
(CFLAGS-clock_nanosleep.c): Likewise.
(CFLAGS-librt-cancellation.c): Likewise.
* shadow/Makefile (CFLAGS-getspent_r.c): Likewise.
(CFLAGS-getspent.c): Likewise.
(CFLAGS-fgetspent.c): Likewise.
(CFLAGS-fgetspent_r.c): Likewise.
(CFLAGS-putspent.c): Likewise.
(CFLAGS-getspnam.c): Likewise.
(CFLAGS-getspnam_r.c): Likewise.
* signal/Makefile (CFLAGS-sigpause.c): Likewise.
(CFLAGS-sigsuspend.c): Likewise.
(CFLAGS-sigtimedwait.c): Likewise.
(CFLAGS-sigwait.c): Likewise.
(CFLAGS-sigwaitinfo.c): Likewise.
(CFLAGS-sigreturn.c): Likewise.
* stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise.
(CFLAGS-vfwprintf.c): Likewise.
(CFLAGS-tmpfile.c): Likewise.
(CFLAGS-tmpfile64.c): Likewise.
(CFLAGS-tempname.c): Likewise.
(CFLAGS-psignal.c): Likewise.
(CFLAGS-vprintf.c): Likewise.
(CFLAGS-cuserid.c): Likewise.
(CFLAGS-errlist.c): Likewise.
(CFLAGS-siglist.c): Likewise.
(CFLAGS-scanf15.c): Likewise.
(CFLAGS-scanf17.c): Likewise.
* stdlib/Makefile (CFLAGS-bsearch.c): Likewise.
(CFLAGS-msort.c): Likewise.
(CFLAGS-qsort.c): Likewise.
(CFLAGS-system.c): Likewise.
(CFLAGS-fmtmsg.c): Likewise.
(CFLAGS-strfmon.c): Likewise.
(CFLAGS-strfmon_l.c): Likewise.
(CFLAGS-strfromd.c): Likewise.
(CFLAGS-strfromf.c): Likewise.
(CFLAGS-strfroml.c): Likewise.
(CFLAGS-tst-bsearch.c): Likewise.
(CFLAGS-tst-qsort.c): Likewise.
(CFLAGS-tst-makecontext2.c): Likewise.
* sunrpc/Makefile (CFLAGS-xbootparam_prot.c): Likewise.
(CFLAGS-xnlm_prot.c): Likewise.
(CFLAGS-xrstat.c): Likewise.
(CFLAGS-xyppasswd.c): Likewise.
(CFLAGS-xklm_prot.c): Likewise.
(CFLAGS-xrex.c): Likewise.
(CFLAGS-xsm_inter.c): Likewise.
(CFLAGS-xmount.c): Likewise.
(CFLAGS-xrusers.c): Likewise.
(CFLAGS-xspray.c): Likewise.
(CFLAGS-xnfs_prot.c): Likewise.
(CFLAGS-xrquota.c): Likewise.
(CFLAGS-xkey_prot.c): Likewise.
(CFLAGS-auth_unix.c): Likewise.
(CFLAGS-key_call.c): Likewise.
(CFLAGS-pmap_rmt.c): Likewise.
(CFLAGS-clnt_perr.c): Likewise.
(CFLAGS-openchild.c): Likewise.
* sysvipc/Makefile (CFLAGS-msgrcv.c): Likewise.
(CFLAGS-msgsnd.c): Likewise.
* termios/Makefile (CFLAGS-tcdrain.c): Likewise.
* time/Makefile (CFLAGS-tzfile.c): Likewise.
(CFLAGS-tzset.c): Likewise.
(CFLAGS-getdate.c): Likewise.
(CFLAGS-test_time.c): Likewise.
(CPPFLAGS-tst-tzname.c): Likewise.
* timezone/Makefile (CFLAGS-zdump.c): Likewise.
(CFLAGS-zic.c): Likewise.
* wcsmbs/Makefile (CFLAGS-wcwidth.c): Likewise.
(CFLAGS-wcswidth.c): Likewise.
(CFLAGS-wcstol.c): Likewise.
(CFLAGS-wcstoul.c): Likewise.
(CFLAGS-wcstoll.c): Likewise.
(CFLAGS-wcstoull.c): Likewise.
(CFLAGS-wcstod.c): Likewise.
(CFLAGS-wcstold.c): Likewise.
(CFLAGS-wcstof128.c): Likewise.
(CFLAGS-wcstof.c): Likewise.
(CFLAGS-wcstol_l.c): Likewise.
(CFLAGS-wcstoul_l.c): Likewise.
(CFLAGS-wcstoll_l.c): Likewise.
(CFLAGS-wcstoull_l.c): Likewise.
(CFLAGS-wcstod_l.c): Likewise.
(CFLAGS-wcstold_l.c): Likewise.
(CFLAGS-wcstof128_l.c): Likewise.
(CFLAGS-wcstof_l.c): Likewise.
(CPPFLAGS-tst-wchar-h.c): Likewise.
(CPPFLAGS-wcstold_l.c): Likewise.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Problem reported by Martin Sebor in:
https://sourceware.org/ml/libc-alpha/2017-11/msg00336.html
* timezone/zic.c (writezone): Use memcpy, not strncpy.
|
|
The PRIdLINENUM abstraction is unnecessary and breaks libc.pot
generation.
* timezone.zic (PRIdLINENO): Remove.
(verror): Use PRIdMAX.
* po/libc.pot: Regenerate.
|
|
This patch updates files coming from tzcode to the versions in tzcode
2017b. A couple of changes to other glibc code are needed.
time/tzset.c was using the SECSPERDAY macro from tzfile.h, which no
longer defines that macro, so a local definition is added to tzset.c.
Because timezone/private.h now defines the _ macro whenever
HAVE_GETTEXT is true, even if it was previously defined, it is also
necessary to avoid a conflict with the definition in
include/libintl.h. Defining _ISOMAC is the obvious way to avoid such
internal definitions being visible, together with defining TZ_DOMAIN
so that zic and zdump continue to get the messages from the libc
domain as desired. However, zic and zdump rely on PKGVERSION and
REPORT_BUGS_TO from config.h, which is not included by default with
_ISOMAC, so -include config.h needs adding to the options for these
programs as well. Together those changes allow unmodified tzcode
2017b sources to work in glibc.
Tested for x86_64.
* timezone/private.h: Update from tzcode 2017b.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
* timezone/Makefile (tz-cflags): Add -D_ISOMAC
-DTZ_DOMAIN='"libc"' -include $(common-objpfx)config.h.
* time/tzset.c (SECSPERDAY): New macro.
|
|
I observed a failure of timezone/tst-timezone with the same symptoms
as reported in bug 14096.
I was unable to reproduce the failure on testing again. However, from
inspection, the cause is as follows. tst-timezone uses time zones
compiled from the northamerica file, but has no dependency on any such
zones, so with a parallel build it is possible that they do not get
compiled until after tst-timezone is run. This patch adds a
dependency on the compiled America/New_York zone (the one used as a
makefile target to cause such zones to be compiled, rather than one
which is actually used in that test) to fix the race.
Tested for x86_64.
[BZ #14096]
* timezone/Makefile ($(objpfx)tst-timezone.out): Depend on
America/New_York.
|
|
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
|
|
|
|
|
|
|
|
If the TZDEFRULES file was used to set the DST rules when $TZ didn't
provide any we need to make sure that the next time it is used we
recompute everything as __tzfile_default changes some setting from what is
provided by TZDEFRULES.
|
|
This patch updates the timezone code from tzcode 2015g. The Makefile
and README changes are based on those in Paul's patch
<https://sourceware.org/ml/libc-alpha/2015-05/msg00553.html>.
Tested for x86_64 and x86.
2016-01-06 Paul Eggert <eggert@cs.ucla.edu>
Joseph Myers <joseph@codesourcery.com>
* timezone/private.h: Update from tzcode 2015g.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
* timezone/ialloc.c: Remove file.
* timezone/scheck.c: Likewise.
* timezone/Makefile (extra-objs): Remove variable.
($(objpfx)zic): Do not depend on scheck.o and ialloc.o.
(tz-cflags): Add -DHAVE_GETTEXT -DUSE_LTZ=0
-Wno-maybe-uninitialized.
(CFLAGS-zdump.c): Remove -fwrapv -DNOID -DHAVE_GETTEXT.
(CFLAGS-zic.c): Remove -DNOID -DHAVE_GETTEXT.
(CFLAGS-ialloc.c): Remove variable.
(CFLAGS-scheck.c): Likewise.
* timezone/README: Update list of files from tzcode.
|
|
|
|
GCC 6.0 (prelease) complains about time_t_min and time_t_max
not being used. These variables are not used in glibc but
are needed in other packages.
* timezone/Makefile (CFLAGS-zic.c): Add -Wno-unused-variable.
(CFLAGS-ialloc.c): Ditto.
(CFLAGS-scheck.c): Ditto.
|
|
Some distros build+install the timezone tools (zic/zdump/tzselect) outside
of glibc and use the upstream package directly. Add a configure flag to
glibc so they can disable install of those tools.
This allows tests to run & pass regardless of the configure flag. Only
the install of them is impacted.
|
|
This change breaks the build with all released versions of GCC.
* timezone/Makefile: Revert previous change.
|
|
ignore the errors.
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com>
* timezone/Makefile: Ignore unused variable errors due to private.h
(time_t_min) and (time_t_max).
* timezone/private.h (time_t_min): Revert removal. (time_t_max):
Likewise.
|
|
The XT testdata install rules expect the testdata dir to already exist in
the build tree, but it doesn't actually create it. Instead, it relies on
the build-testdata define happening to be executed before it (which runs
zic which creates the dir). When we run in parallel though, it's easy to
hit a failure:
$ cd timezone
$ rm -rf $objdir/timezone/testdata
$ make check -j
...
cp testdata/XT1 .../timezone/testdata/XT1
cp: cannot create regular file '.../timezone/testdata/XT1': No such file or directory
Makefile:116: recipe for target '.../timezone/testdata/XT1' failed
make: *** [.../timezone/testdata/XT1] Error 1
make: *** Waiting for unfinished jobs....
|
|
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com>
* resolv/base64.c (rcsid): Remove unused static.
* sysdeps/ieee754/dbl-64/atnat2.h (qpi1): Remove unused
static. (tqpi1): Likewise.
* sysdeps/ieee754/dbl-64/uexp.h (one): Likewise.
* sysdeps/ieee754/dbl-64/upow.h (sqrt_2): Likewise.
* sysdeps/ieee754/flt-32/e_log10f.c (one): Likewise.
* sysdeps/ieee754/flt-32/s_cosf.c (one): Likewise.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (zero): Likewise.
* sysdeps/ieee754/ldbl-128/s_erfl.c (half): Likewise.
* sysdeps/ieee754/ldbl-128/s_log1pl.c (maxlog): Likewise.
* timezone/private.h (time_t_min): Likewise. (time_t_max):
Likewise.
|
|
The current timezone/ code from tzcode doesn't need
-Wno-strict-prototypes. This patch removes it from the CFLAGS
settings in timezone/Makefile.
Tested for x86_64 that glibc still builds OK with the patch applied.
* timezone/Makefile (CFLAGS-zdump.c): Remove
-Wno-strict-prototypes.
(CFLAGS-zic.c): Likewise.
(CFLAGS-ialloc.c): Likewise.
(CFLAGS-scheck.c): Likewise.
|
|
|
|
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.
Remove these arguments and include the test skeleton in these tests.
|
|
This test is reliably taking 2.3 seconds on my system, and the default
is 2 seconds, so it always times out. Bump it up to 5 seconds instead.
|
|
The Makefile rule is called one time for target %/UTC or %/Universal.
If the tests are run in parallel, UTC or Universal can trigger the rule.
This patch patch generates the second test-result file as a copy of the
generated one.
Thus the testsuite can rely on the existence of the test-result files
regardless of which target has triggered the rule.
ChangeLog:
* timezone/Makefile (%/UTC %/Universal):
Generate test-result files for UTC and Universal.
|
|
|
|
|
|
|
|
Allow building tests in a cross configuration without a test wrapper
defined. This is helpful for doing simple build testing of tests.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* localedata/Makefile: Move assignment to tests-special
into an ifdef testing run-built-tests.
* timezone/Makefile: Likewise.
|
|
These programs get the NOT_IN_libc twice, once through the 'other'
target and another explicitly. Remove the explicitly added CPFLAG.
* catgets/Makefile (CPPFLAGS-gencat): Remove.
* iconv/Makefile (CPPFLAGS-iconv_prog): Likewise.
(CPPFLAGS-iconvconfig): Likewise.
* timezone/Makefile (CPPFLAGS-zic): Likewise.
|
|
This patch updates the timezone code from tzcode 2014e (the previous
version used was 2013i).
Tested x86_64.
* timezone/checktab.awk: Update from tzcode 2014e.
* timezone/private.h: Likewise.
* timezone/tzfile.h: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
|
|
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
|
|
consistent environment.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
|
|
|
|
|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I
raised the question of counting miscellaneous dependencies of tests,
built on the host rather than the build system, as tests, so that when
test failures don't stop "make check" neither do those other builds on
the host, so that a flaky host doesn't stop "make check" from
producing a complete summary of test results. Brooks supported that
idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>.
This patch implements that change for all the examples I could find:
one message catalog in catgets/, locales in localedata/ and timezone
files in timezone/.
Tested x86_64.
* catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat.
($(objpfx)sample.SJIS.cat): Use $(evaluate-test).
* timezone/Makefile (testdata): Move definition above include of
Rules.
(test-zones): New variable.
(tests-special): Add zone files.
(build-testdata): Use $(evaluate-test).
localedata/ChangeLog:
* Makefile (LOCALES): Move definition above include of Rules.
(LOCALE_SRCS): Likewise.
(CHARMAPS): Likewise.
(CTYPE_FILES): Likewise.
(tests-special): Add locale files.
($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
|
|
|
