| Age | Commit message (Collapse) | Author |
|---|
|
tm time struct contains tm_wday and tm_yday that were previously not
checked in this test. Also added new test cases for date formats
containing %D, %R or %h.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
In documentation, call strings like "CST" time zone abbreviations, not
time zone names. This terminology is more precise, and is what tzdb uses.
A string like "CST" is ambiguous and does not fully name a time zone.
|
|
The getdate testcases all expect successful results. Add support for
negative testcases and testcases where a full date and time are not
supplied by skipping the tm checks in the test. Add a testcase that
would catch a use-after-free that was recently found.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
|
|
tst-getdate used to rely on an in-tree datemsk file that was
subsequently replaced by a file created during test execution. This
commit removes the unused file and corresponding env-var and uses a more
appropriate name for the temp file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
getdate would free the buffer pointed to by the result of its call to
strptime, then reference the same buffer later on -- leading to a
use-after-free. This commit fixes that.
Reported-by: Martin Coufal <mcoufal@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Container management default seccomp filter [1] only accepts
clock_settime if process has also CAP_SYS_TIME. So also handle
EPERM as well.
Also adapt the test to libsupport and add a proper Copyright header.
Checked on aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
Using write without cheks leads to warn unused result when __wur is
enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Avoid possible stack overflow by removing alloca() and converting to
wide characters within the buffer.
Suggested-by: Paul Eggert <eggert@cs.ucla.edu>
|
|
Reduce the usage of alloca() to the bare minimum to avoid the potential
for stack overflow. Use __strndup to simplify the code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
strftime(3) doesn't accept null pointers in any of the parameters.
Cc: Paul Eggert <eggert@cs.ucla.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Both functions use time_t only internally, so the ABI is not affected.
|
|
|
|
The daylight variable is supposed to be set to 1 if DST is ever in
use for the current time zone. But __tzfile_read used to do this:
__daylight = rule_stdoff != rule_dstoff;
This check can fail to set __daylight to 1 if the DST and non-DST
offsets happen to be the same.
|
|
The tzfile_mtime is already compared to 64 bit time_t stat call.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
|
|
The Z modifier is a nonstandard synonymn for z (that predates z
itself) and compiler might issue an warning for in invalid
conversion specifier.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This patch syncs mktime.c from Gnulib, fixing a
problem reported by Mark Krenz <https://bugs.gnu.org/48085>,
and it should fix BZ#29035 too.
* time/mktime.c (__mktime_internal): Be more generous about
accepting arguments with the wrong value of tm_isdst, by falling
back to a one-hour DST difference if we find no nearby DST that is
unusual. This fixes a problem where "1986-04-28 00:00 EDT" was
rejected when TZ="America/Indianapolis" because the nearest DST
timestamp occurred in 1970, a temporal distance too great for the
old heuristic. This also also narrows the search a bit, which
is a minor performance win.
|
|
This patch does not affect glibc. It affects only Gnulib-specific
code and is for coordination with Gnulib.
|
|
The next revision of the ISO C standard has added the timegm function
(that was already supported in glibc). Update the feature test
conditionals on its declaration in <time.h> accordingly.
Tested for x86_64.
|
|
This avoids an alias violation later. This commit also fixes
an incorrect double-checked locking idiom in _nl_init_era_entries.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
We can call the cleanup functions directly from _nl_unload_locale
if we pass the category to it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
clock_settime()
clock_settime64()
clock_gettime()
clock_gettime64()
Add __nonnull((2)) to avoid null pointer access.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27662
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=29084
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
When using a timezone file with a truncated starting time,
generated by the zic in IANA tzcode-2021d a.k.a. tzlib-2021d
(also in tzlib-2021e; current as of this writing), glibc
asserts in __tzfile_read (on e.g. tzset() for this file) and
you may find lines matching "tzfile.c:435: __tzfile_read:
Assertion `num_types == 1' failed" in your syslog.
One example of such a file is the tzfile for Asuncion
generated by tzlib-2021e as follows, using the tzlib-2021e zic:
"zic -d DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica". Note that in its type 2 header, it has
two entries in its "time-types" array (types), but only one
entry in its "transition types" array (type_idxs).
This is valid and expected already in the published RFC8536, and
not even frowned upon: "Local time for timestamps before the
first transition is specified by the first time type (time type
0)" ... "every nonzero local time type index SHOULD appear at
least once in the transition type array". Note the "nonzero ...
index". Until the 2021d zic, index 0 has been shared by the
first valid transition but with 2021d it's separate, set apart
as a placeholder and only "implicitly" indexed. (A draft update
of the RFC mandates that the entry at index 0 is a placeholder
in this case, hence can no longer be shared.)
* time/tzfile.c (__tzfile_read): Don't assert when no transitions
are found.
Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
|
|
* time/tzfile.c (__tzfile_compute): Fix unlikely off-by-one bug
that accessed before start of an array when an oddball-but-valid
TZif file was queried with an unusual time_t value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Running the test on a 4.4 kernel within KVM, the precision used on
ITIMER_VIRTUAL and ITIMER_PROF seems to different than the one used
for ITIMER_REAL (it seems the same used for CLOCK_REALTIME_COARSE and
CLOCK_MONOTONIC_COARSE). I did not see it on other kernels, for
instance 5.11 and 4.15.
To avoid trying to guess the resolution used, do not check the
nanosecond internal values for the specific timers.
Checked on i686-linux-gnu with a 4.4 kernel.
|
|
The recent change to use __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 to avoid
doing 64-bit checks on some platforms broke the test for hurd where
__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 is not defined. With error:
tst-itimer.c: In function 'do_test':
tst-itimer.c:103:11: error: '__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64' undeclared (first use in this function)
103 | if (__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tst-itimer.c:103:11: note: each undeclared identifier is reported only once for each function it appears in
Define a support helper to detect when setitimer and getitimer support
64-bit time_t.
Fixes commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems").
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Joseph Myers <joseph@codesourcery.com>
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
On the port of OpenRISC I am working on and it appears the rv32 port
we have sets __TIMESIZE == 64 && __WORDSIZE == 32. This causes the
size of time_t to be 8 bytes, but the tv_sec in the kernel is still 32-bit
causing truncation.
The truncations are unavoidable on these systems so skip the
testing/failures by guarding with __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64.
Also, futher in the tests and in other parts of code checking for time_t
overflow does not work on 32-bit systems when time_t is 64-bit. As
suggested by Adhemerval, update the in_time_t_range function to assume
32-bits by using int32_t.
This also brings in the header for stdint.h so we can update other
usages of __int32_t to int32_t as suggested by Adhemerval.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
It is enabled through a new rule, tests-y2038, which is built only
when the ABI supports the comapt 64-bit time_t (defined by the
header time64-compat.h, which also enables the creation of the
symbol Version for Linux). It means the tests are not built
for ABI which already provide default 64-bit time_t.
The new rule already adds the required LFS and 64-bit time_t
compiler flags.
The current coverage is:
* libc:
- adjtime tst-adjtime-time64
- adjtimex tst-adjtimex-time64
- clock_adjtime tst-clock_adjtime-time64
- clock_getres tst-clock-time64, tst-cpuclock1-time64
- clock_gettime tst-clock-time64, tst-clock2-time64,
tst-cpuclock1-time64
- clock_nanosleep tst-clock_nanosleep-time64,
tst-cpuclock1-time64
- clock_settime tst-clock2-time64
- cnd_timedwait tst-cnd-timedwait-time64
- ctime tst-ctime-time64
- ctime_r tst-ctime-time64
- difftime tst-difftime-time64
- fstat tst-stat-time64
- fstatat tst-stat-time64
- futimens tst-futimens-time64
- futimes tst-futimes-time64
- futimesat tst-futimesat-time64
- fts_* tst-fts-time64
- getitimer tst-itimer-timer64
- getrusage
- gettimeofday tst-clock_nanosleep-time64
- glob / globfree tst-gnuglob64-time64
- gmtime tst-gmtime-time64
- gmtime_r tst-gmtime-time64
- lstat tst-stat-time64
- localtime tst-y2039-time64
- localtime_t tst-y2039-time64
- lutimes tst-lutimes-time64
- mktime tst-mktime4-time64
- mq_timedreceive tst-mqueue{1248}-time64
- mq_timedsend tst-mqueue{1248}-time64
- msgctl test-sysvmsg-time64
- mtx_timedlock tst-mtx-timedlock-time64
- nanosleep tst-cpuclock{12}-time64,
tst-mqueue8-time64, tst-clock-time64
- nftw / ftw ftwtest-time64
- ntp_adjtime tst-ntp_adjtime-time64
- ntp_gettime tst-ntp_gettime-time64
- ntp_gettimex tst-ntp_gettimex-time64
- ppoll tst-ppoll-time64
- pselect tst-pselect-time64
- pthread_clockjoin_np tst-join14-time64
- pthread_cond_clockwait tst-cond11-time64
- pthread_cond_timedwait tst-abstime-time64
- pthread_mutex_clocklock tst-abstime-time64
- pthread_mutex_timedlock tst-abstime-time64
- pthread_rwlock_clockrdlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_clockwrlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_timedrdlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_timedwrlock tst-abstime-time64, tst-rwlock14-time64
- pthread_timedjoin_np tst-join14-time64
- recvmmsg tst-cancel4_2-time64
- sched_rr_get_interval tst-sched_rr_get_interval-time64
- select tst-select-time64
- sem_clockwait tst-sem5-time64
- sem_timedwait tst-sem5-time64
- semctl test-sysvsem-time64
- semtimedop test-sysvsem-time64
- setitimer tst-mqueue2-time64, tst-itimer-timer64
- settimeofday tst-settimeofday-time64
- shmctl test-sysvshm-time64
- sigtimedwait tst-sigtimedwait-time64
- stat tst-stat-time64
- thrd_sleep tst-thrd-sleep-time64
- time tst-mqueue{1248}-time64
- timegm tst-timegm-time64
- timer_gettime tst-timer4-time64
- timer_settime tst-timer4-time64
- timerfd_gettime tst-timerfd-time64
- timerfd_settime tst-timerfd-time64
- timespec_get tst-timespec_get-time64
- timespec_getres tst-timespec_getres-time64
- utime tst-utime-time64
- utimensat tst-utimensat-time64
- utimes tst-utimes-time64
- wait3 tst-wait3-time64
- wait4 tst-wait4-time64
* librt:
- aio_suspend tst-aio6-time64
- mq_timedreceive tst-mqueue{1248}-time64
- mq_timedsend tst-mqueue{1248}-time64
- timer_gettime tst-timer4-time64
- timer_settime tst-timer4-time64
* libanl:
- gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
The getdate is basically a wrapper localtime and mktime. The 64-bit
time support is done calling the 64-bit internal functions, there is
no need to add a new symbol version.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
ISO C2X added the asctime_r, ctime_r, gmtime_r and localtime_r
functions from POSIX. It's now removed asctime_r and ctime_r again,
reflecting that they are marked obsolescent in POSIX; update glibc's
time.h accordingly.
The same change that removed those two functions from C2X also marked
asctime and ctime as deprecated (reflecting how POSIX shows them as
obsolescent), i.e. using the [[deprecated]] attribute in the
prototypes shown in C2X. It's less clear if we should explicitly
deprecate those functions like that in the glibc headers; this patch
does nothing regarding such a deprecation (there's no normative
requirement from C2X showing the functions as deprecated).
Tested for x86_64 and x86.
|
|
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
|
|
The test is also converted to use libsupport.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This essentially folds compat_symbol_unique functionality into
compat_symbol.
This change eliminates the need for intermediate aliases for defining
multiple symbol versions, for both compat_symbol and versioned_symbol.
Some binutils versions do not suport multiple versions per symbol on
some targets, so aliases are automatically introduced, similar to what
compat_symbol_unique did. To reduce symbol table sizes, a configure
check is added to avoid these aliases if they are not needed.
The new mechanism works with data symbols as well as function symbols,
due to the way an assembler-level redirect is used. It is not
compatible with weak symbols for old binutils versions, which is why
the definition of __malloc_initialize_hook had to be changed. This
is not a loss of functionality because weak symbols do not matter
to dynamic linking.
The placeholder symbol needs repeating in nptl/libpthread-compat.c
now that compat_symbol is used, but that seems more obvious than
introducing yet another macro.
A subtle difference was that compat_symbol_unique made the symbol
global automatically. compat_symbol does not do this, so static
had to be removed from the definition of
__libpthread_version_placeholder.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: DJ Delorie <dj@redhat.com>
|
