| Age | Commit message (Collapse) | Author |
|---|
|
clone already uses r31 to temporarily save input arguments before doing the
syscall, so we use a different register to read from the TCB. We can also avoid
allocating another stack frame, which is not needed since we can simply extend
the usage of the red zone.
Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
Linux kernel v5.9 added support for system calls using the scv
instruction for POWER9 and later. The new codepath provides better
performance (see below) if compared to using sc. For the
foreseeable future, both sc and scv mechanisms will co-exist, so this
patch enables glibc to do a runtime check and use scv when it is
available.
Before issuing the system call to the kernel, we check hwcap2 in the TCB
for PPC_FEATURE2_SCV to see if scv is supported by the kernel. If not,
we fallback to sc and keep the old behavior.
The kernel implements a different error return convention for scv, so
when returning from a system call we need to handle the return value
differently depending on the instruction we used to enter the kernel.
For syscalls implemented in ASM, entry and exit are implemented by
different macros (PSEUDO and PSEUDO_RET, resp.), which may be used in
sequence (e.g. for templated syscalls) or with other instructions in
between (e.g. clone). To avoid accessing the TCB a second time on
PSEUDO_RET to check which instruction we used, the value read from
hwcap2 is cached on a non-volatile register.
This is not needed when using INTERNAL_SYSCALL macro, since entry and
exit are bundled into the same inline asm directive.
The dynamic loader may issue syscalls before the TCB has been setup
so it always uses sc with no extra checks. For the static case, there
is no compile-time way to determine if we are inside startup code,
so we also check the value of the thread pointer before effectively
accessing the TCB. For such situations in which the availability of
scv cannot be determined, sc is always used.
Support for scv in syscalls implemented in their own ASM file (clone and
vfork) will be added later. For now simply use sc as before.
Average performance over 1M calls for each syscall "type":
- stat: C wrapper calling INTERNAL_SYSCALL
- getpid: templated ASM syscall
- syscall: call to gettid using syscall function
Standard:
stat : 1.573445 us / ~3619 cycles
getpid : 0.164986 us / ~379 cycles
syscall : 0.162743 us / ~374 cycles
With scv:
stat : 1.537049 us / ~3535 cycles <~ -84 cycles / -2.32%
getpid : 0.109923 us / ~253 cycles <~ -126 cycles / -33.25%
syscall : 0.116410 us / ~268 cycles <~ -106 cycles / -28.34%
Tested on powerpc, powerpc64, powerpc64le (with and without scv)
Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
Add support to treat pseudo-numbers specially and implement x86
version to consider all of them as signaling.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
With xmknod wrapper functions removed (589260cef8), the mknod functions
are now properly exported, and version is done using symbols versioning
instead of the extra _MKNOD_* argument.
It also allows us to consolidate Linux and Hurd mknod implementation.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
With xstat wrapper functions removed (8ed005daf0), the stat functions
are now properly exported, and version is done using symbols versioning
instead of the extra _STAT_* argument.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
The new __proc_waitid RPC now expects WEXITED to be passed, allowing to
properly implement waitid, and thus define the missing W* macros
(according to FreeBSD values).
|
|
Instead of having the arch-specific trampoline setup code detect whether
preemption happened or not, we'd rather pass it the sigaction. In the
future, this may also allow to change sa_flags from post_signal().
|
|
When argv is empty, we need to add the original script to be run on the
shell command line.
|
|
Reported by Bruno Haible <bruno@clisp.org>
|
|
Remove _ISOMAC check from <cpu-features.h> since it isn't an installer
header file.
|
|
CPU_FEATURE_CPU_P is defined in sysdeps/x86/sys/platform/x86.h. Remove
the duplicated CPU_FEATURE_CPU_P in sysdeps/x86/include/cpu-features.h.
|
|
Do not attempt to fix the significand top bit in long double input
received in printf. The code should never reach here because isnan
should now detect unnormals as NaN. This is already a NOP for glibc
since it uses the gcc __builtin_isnan, which detects unnormals as NaN.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This syncs up isnanl behaviour with gcc. Also move the isnanl
implementation to sysdeps/x86 and remove the sysdeps/x86_64 version.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Also move sysdeps/i386/fpu/s_fpclassifyl.c to
sysdeps/x86/fpu/s_fpclassifyl.c and remove
sysdeps/x86_64/fpu/s_fpclassifyl.c
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
For new inputs added in commit cad5ad81d2f7f58a7ad0d8afa8c1b710,
as seen on a z13 system.
|
|
For new inputs added in commit cad5ad81d2f7f58a7ad0d8afa8c1b710,
as seen on a POWER8 system.
|
|
Add Intel Linear Address Masking (LAM) support to <sys/platform/x86.h>.
HAS_CPU_FEATURE (LAM) can be used to detect if LAM is enabled in CPU.
LAM modifies the checking that is applied to 64-bit linear addresses,
allowing software to use of the untranslated address bits for metadata.
|
|
For new inputs added in commit cad5ad81d2f7f58a7ad0d8afa8c1b710.
|
|
For new test cases in
commit cad5ad81d2f7f58a7ad0d8afa8c1b7101a0301fb
|
|
This final patch provides the architecture-specific implementation of
the memory-tagging support hooks for aarch64.
|
|
Add various defines and stubs for enabling MTE on AArch64 sysv-like
systems such as Linux. The HWCAP feature bit is copied over in the
same way as other feature bits. Similarly we add a new wrapper header
for mman.h to define the PROT_MTE flag that can be used with mmap and
related functions.
We add a new field to struct cpu_features that can be used, for
example, to check whether or not certain ifunc'd routines should be
bound to MTE-safe versions.
Finally, if we detect that MTE should be enabled (ie via the glibc
tunable); we enable MTE during startup as required.
Support in the Linux kernel was added in version 5.10.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Older versions of the Linux kernel headers obviously lack support for
memory tagging, but we still want to be able to build in support when
using those (obviously it can't be enabled on such systems).
The linux kernel extensions are made to the platform-independent
header (linux/prctl.h), so this patch takes a similar approach.
|
|
This patch adds the basic support for memory tagging.
Various flavours are supported, particularly being able to turn on
tagged memory at run-time: this allows the same code to be used on
systems where memory tagging support is not present without neededing
a separate build of glibc. Also, depending on whether the kernel
supports it, the code will use mmap for the default arena if morecore
does not, or cannot support tagged memory (on AArch64 it is not
available).
All the hooks use function pointers to allow this to work without
needing ifuncs.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
This is clever, but it confuses downstream detection in at least zstd
and GNOME's glib. zstd has preprocessor tests for the 'st_mtime' macro,
which is not provided by the path using the anonymous union; glib checks
for the presence of 'st_mtimensec' in struct stat but then tries to
access that field in struct statx (which might be a bug on its own).
Checked with a build for alpha-linux-gnu.
|
|
|
|
setjmp() uses C code to store current registers into jmp_buf
environment. -fstack-protector-all places canary into setjmp()
prologue and clobbers 'a5' before it gets saved.
The change inhibits stack canary injection to avoid clobber.
|
|
Mach actually rather fills the uesp field, not esp.
|
|
When SA_SIGINFO is available, sysdeps/posix/s?profil.c use it, so we have to
fix the __profil_counter function accordingly, using sigcontextinfo.h's
sigcontext_get_pc.
|
|
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
|
|
x86 binaries are linked at 0x08000000, so we need to let them get mapped
there.
|
|
dl-sysdep has been wanting to use high bits in the vm_map mask for decades,
but that was only implemented lately.
|
|
The __sin32 and __cos32 functions were only used in the now removed slow
path of asin and acos.
|
|
asin and acos have slow paths for rounding the last bit that cause some
calls to be 500-1500x slower than average calls.
These slow paths are rare, a test of a trillion (1.000.000.000.000)
random inputs between -1 and 1 showed 32870 slow calls for acos and 4473
for asin, with most occurrences between -1.0 .. -0.9 and 0.9 .. 1.0.
The slow paths claim correct rounding and use __sin32() and __cos32()
(which compare two result candidates and return the closest one) as the
final step, with the second result candidate (res1) having a small offset
applied from res. This suggests that res and res1 are intended to be 1
ULP apart (which makes sense for rounding), barring bugs, allowing us to
pick either one and still remain within 1 ULP of the exact result.
Remove the slow paths as the accuracy is better than 1 ULP even without
them, which is enough for glibc.
Also remove code comments claiming correctly rounded results.
After slow path removal, checking the accuracy of 14.400.000.000 random
asin() and acos() inputs showed only three incorrectly rounded
(error > 0.5 ULP) results:
- asin(-0x1.ee2b43286db75p-1) (0.500002 ULP, same as before)
- asin(-0x1.f692ba202abcp-4) (0.500003 ULP, same as before)
- asin(-0x1.9915e876fc062p-1) (0.50000000001 ULP, previously exact)
The first two had the same error even before this commit, and they did
not use the slow path at all.
Checking 4934 known randomly found previously-slow-path asin inputs
shows 25 calls with incorrectly rounded results, with a maximum error of
0.500000002 ULP (for 0x1.fcd5742999ab8p-1). The previous slow-path code
rounded all these inputs correctly (error < 0.5 ULP).
The observed average speed increase was 130x.
Checking 36240 known randomly found previously-slow-path acos inputs
shows 42 calls with incorrectly rounded results, with a maximum error of
0.500000008 ULP (for 0x1.f63845056f35ep-1). The previous "exact"
slow-path code showed 34 calls with incorrectly rounded results, with the
same maximum error of 0.500000008 ULP (for 0x1.f63845056f35ep-1).
The observed average speed increase was 130x.
The functions could likely be trimmed more while keeping acceptable
accuracy, but this at least gets rid of the egregiously slow cases.
Tested on x86_64.
|
|
This patch updates the kernel version in the test tst-mman-consts.py
to 5.10. (There are no new MAP_* constants covered by this test in
5.10 that need any other header changes.)
Tested with build-many-glibcs.py.
|
|
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047ad2f23f758901c6816422573544453
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
|
|
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This just moves the existing nptl implementation to reuse as it is in
htl.
|
|
Linux 5.10 has one new syscall, process_madvise. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
|
|
The implementation is extremely similar to the nptl implementation, but
with slight differences in the futex interface. This fixes some of BZ
25521.
|
|
Needed by libpthread for sem_open and sem_close
|
|
That provides futex_supports_pshared
|
|
To be coherent with other ports, let's make lll_* take a variable, and
rename those that keep taking a ptr into __lll_*.
|
|
To get coherent with other ports.
|
|
This symbol is not in the implementation reserved namespace for static
linking and it was never used: it seems it was mistakenly added in the
orignal strlen_asimd commit 436e4d5b965abe592d26150cb518accf9ded8fe4
|
|
A bti c was missing from rcrt1.o which made all -static-pie
binaries fail at program startup on BTI enabled systems.
Fixes bug 27068.
|
|
Since we can't tell if the tunable value is set by user or not:
https://sourceware.org/bugzilla/show_bug.cgi?id=27069
remove the default REP MOVSB threshold tunable value so that the correct
default value will be set correctly by init_cacheinfo ().
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
Re-mmap executable segments if possible instead of using mprotect
to add PROT_BTI. This allows using BTI protection with security
policies that prevent mprotect with PROT_EXEC.
If the fd of the ELF module is not available because it was kernel
mapped then mprotect is used and failures are ignored. To protect
the main executable even when mprotect is filtered the linux kernel
will have to be changed to add PROT_BTI to it.
The delayed failure reporting is mainly needed because currently
_dl_process_gnu_properties does not propagate failures such that
the required cleanups happen. Using the link_map_machine struct for
error propagation is not ideal, but this seemed to be the least
intrusive solution.
Fixes bug 26831.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
To handle GNU property notes on aarch64 some segments need to
be mmaped again, so the fd of the loaded ELF module is needed.
When the fd is not available (kernel loaded modules), then -1
is passed.
The fd is passed to both _dl_process_pt_gnu_property and
_dl_process_pt_note for consistency. Target specific note
processing functions are updated accordingly.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Handle unaligned executable load segments (the bfd linker is not
expected to produce such binaries, but other linkers may).
Computing the mapping bounds follows _dl_map_object_from_fd more
closely now.
Fixes bug 26988.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
