Age | Commit message (Collapse) | Author |
|
Delay the use of stat/fstat until stat data is required. When the
kernel returns ST_VALID, stat data is not used by __internal_statvfs.
|
|
|
|
|
|
|
|
|
|
|
|
The current code for handling concurrent resolution says that the
ABI for _dl_tlsdesc_resolve_hold is the same as that of
_dl_tlsdesc_lazy_resolver. However _dl_tlsdesc_resolve_hold is
called from the trampoline directly rather than the lazy resolver
stub so, for example, r2 has not been pushed so does not needed
to be restored.
This fixes an intermittent failure in nptl/tst-tls3 when building
glibc for arm-linux-gnueabihf with -mtls-dialect=gnu2.
ChangeLog:
2014-05-27 Will Newton <will.newton@linaro.org>
[BZ #16990]
* sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_resolve_hold): Save
and restore r2 rather than just restoring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This patch replaces the insrdi by insrwi in powerpc32 assembly.
|
|
This fixes a variety of testsuite failures for me:
tststatic.out Error 1
tststatic2.out Error 1
tst-tls9-static.out Error 1
tst-audit8.out Error 127
tst-audit9.out Error 127
tst-audit1.out Error 127
and also has the added benefit of making LD_AUDIT/sotruss work on
AArch64.
Otherwise, we bail out early in _dl_try_allocate_static_tls as the
alignment requirement of the PT_TLS section in libc is 16.
|
|
This macro was removed by
2005-11-16 Daniel Jacobowitz <dan@codesourcery.com>
but not applied to the (still separate) eabi port so necro'd
when the eabi port superceded the old abi. It was thence
copied into the new AArch64 port.
|
|
Move the error branch from the PSEUDO_RET macro to the PSEUDO macro.
This is in line with other architectures, and will enable further improvments.
|
|
While they do something for AArch32, they're useless for AArch64.
|
|
|
|
|
|
|
|
|
|
|
|
The merge at ab21431318d99c94e644606dee1e6a4545d98007 failed
to properly remove the file.
|
|
As with various other issues of this kind, bug 16977 is log10 (1)
wrongly returning -0 rather than +0 in round-downward mode because of
an implementation effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of logl is
essentially the same as the ldbl-128 one).
[BZ #16977]
* sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute
value when x - 1 is zero.
* sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise.
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l):
Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log10_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch remove the unneeded copysign[f] macro from powerpc
math_private.h, since they are already covered in generic version.
|
|
This patch fixes a similar issue to
736c304a1ab4cee36a2f3343f1698bc0abae4608, where for PPC32 if the symbol
is defined as hidden (memchr) then compiler will create a local branc
(symbol@local) and the linker will not create a required PLT call to
make the ifunc work. It changes the default hidden symbol (__GI_memchr)
to default memchr symbol for powerpc32 (__memchr_ppc32).
|
|
|
|
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
|
|
This also highlights that we'd been loading 64-bits instead of
the proper 32-bits. Caught by the linker as a relocation error,
since the variable happened to be unaligned for 64-bits.
|
|
|
|
sysdeps/unix/sysv/linux/arm/unwind-resume.c and
sysdeps/unix/sysv/linux/arm/unwind-forcedunwind.c have static
variables that are written in C code but only read from toplevel asms.
Current GCC trunk now optimizes away such apparently write-only static
variables, so causing a build failure. This patch marks those
variables with __attribute_used__ to avoid that optimization.
Tested that this fixes the build for ARM.
* sysdeps/unix/sysv/linux/arm/unwind-forcedunwind.c
(libgcc_s_resume): Use __attribute_used__.
* sysdeps/unix/sysv/linux/arm/unwind-resume.c (libgcc_s_resume):
Likewise.
|
|
|
|
This patch fixes the __copysignf optimized macro meant to internal libm
usage when used with constant value. Without the explicit cast to
float, if it is used with const double value (for instance, on
s_casinhf.c) double constants will be used and it may lead to precision
issues in some algorithms.
It fixes the following failures on PPC64/POWER7:
Failure: Test: Real part of: cacos_downward (inf + 0 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_downward (inf - 0 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_downward (inf + 0.5 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_downward (inf - 0.5 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_towardzero (inf + 0 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_towardzero (inf - 0 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_towardzero (inf + 0.5 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
Failure: Test: Real part of: cacos_towardzero (inf - 0.5 i)
Result:
is: 1.19209289550781250000e-07 0x1.00000000000000000000p-23
should be: 0.00000000000000000000e+00 0x0.00000000000000000000p+0
|
|
|
|
Using the default header instead. This matches the kernel, which also
uses the generic header. Fixes the sys/wait.h conform issue, where
si_band had the wrong type.
|
|
|
|
The current code for nocancel syscalls does not do a comparison of
the system call return value. This leads to code being generated
where the b.cs follows the svc instruction directly without setting
the flags on which the branch depends.
ChangeLog:
2014-05-20 Will Newton <will.newton@linaro.org>
* sysdeps/unix/sysv/linux/aarch64/nptl/sysdep-cancel.h (PSEUDO):
Test the return value of the system call in the nocancel case.
|
|
This patch fixes an issue observed by the Xen project, where including
signal.h exposes various PSR_MODE #defines. This is due to the usage
in sys/user.h and sys/procfs.h of the struct user_pt_regs and
user_fpsimd_state included via asm/ptrace.h. The namespace pollution
this inclusion introduce is already partially fixed with some #undef
of the PTRACE_* symbols, but other symbols like the PSR_MODE ones are
still present, and undefining them is not safe since a user can
include ptrace.h before user.h.
My proposition is to define the 2 structures we need in user.h and get
rid of the asm/ptrace.h inclusion.
Build and make check are clean on AArch64.
2014-05-20 Will Newton <will.newton@linaro.org>
Yvan Roux <yvan.roux@linaro.org>
* sysdeps/unix/sysv/linux/aarch64/sys/user.h: Remove unused
#include of asm/ptrace.h.
(PTRACE_GET_THREAD_AREA): Remove #undef.
(PTRACE_GETHBPREGS): Likewise.
(PTRACE_SETHBPREGS): Likewise.
(struct user_regs_struct): New structure.
(struct user_fpsimd_struct): New structure.
* sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove unused
#include of asm/ptrace.h and second #include of sys/user.h.
(PTRACE_GET_THREAD_AREA): Remove #undef.
(PTRACE_GETHBPREGS): Likewise.
(PTRACE_SETHBPREGS): Likewise.
(ELF_NGREG): Use new struct user_regs_struct.
(elf_fpregset_t): Use new struct user_fpsimd_struct.
|
|
This patch moves the hypotf multiarch implementation to correct path.
|
|
This reverts commit c0c08d02c82275353f5c556f935a1a01714d9d7f.
|
|
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Add missing
membar to avoid block loads/stores to overlap previous stores.
|
|
|
|
|
|
* sysdeps/unix/sysv/linux/sparc/bits/termios.h (PAGEOUT, WRAP):
Protect with __USE_GNU.
(TIOCSET_TEMPT): Likewise.
(TIOCM_LE, TIOCM_DTR, TIOCM_RTS, TIOCM_ST, TIOCM_SR, TIOCM_CTS,
TIOCM_CAR, TIOCM_RNG, TIOCM_DSR, TIOCM_CD, TIOCM_RI): Remove as
these are already provided in bits/ioctl-types.h
|
|
|
|
Commit 7d92b78723848ae616709eb8f0191ea067025b18 [Fix ARM NAN fraction
bits.] removed all the bits set from NANFRAC macros and, when propagated
to libgcc, regressed gcc.dg/torture/builtin-math-7.c on soft-fp arm-eabi
targets, currently ARMv6-M (`-march=armv6-m -mthumb') only. This is
because when used to construct a NaN in the semi-raw mode, they now
build an infinity instead. Consequently operations such as (Inf - Inf)
now produce Inf rather than NaN. The change worked for the original
test case, posted with PR libgcc/60166, because division is made in the
canonical mode, where the quiet bit is set separately, from the fp
class.
This change brings the quiet bit back to these macros, making semi-raw
mode calculations produce the expected results again.
|
|
This patch guard the BSD definition for terminal modes in PowerPC
specific header fixing the following conformance failures:
FAIL: conform/POSIX/termios.h/conform
FAIL: conform/POSIX2008/termios.h/conform
FAIL: conform/UNIX98/termios.h/conform
|
|
|
|
|