aboutsummaryrefslogtreecommitdiff
path: root/sysdeps
AgeCommit message (Collapse)Author
2019-08-28[powerpc] fe{en,dis}ableexcept, fesetmode: optimize FPSCR accessesPaul A. Clarke
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the "mode" (exception enable and rounding mode) bits of the Floating Point Status Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be used to write just those bits back to the FPSCR. The net is better performance. In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or they determine that it doesn't need to be written because it is not changing. In either case, the local variable holds the current values of the enable bits in the FPSCR. This local variable can be used instead of again reading the FPSCR. Also, that value of the FPSCR which is read the second time is validated against the requested enables. Since the write can't fail, this validation step is unnecessary, and can be removed. Instead, the exceptions to be enabled (or disabled) are transformed into available bits in the FPSCR, then validated after being transformed back, to ensure that all requested bits are actually being set. For example, FE_INVALID_SQRT can be requested, but cannot actually be set. This bit is not mapped during the transformations, so a test for that bit being set before and after transformations will show the bit would not be set, and the function will return -1 for failure. Finally, convert the local macros in fesetmode.c to more generally useful macros in fenv_libc.h.
2019-08-28[powerpc] fe{en,dis}ableexcept optimize bit translationsPaul A. Clarke
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc. Within the functions, these bits must be translated to/from the corresponding enable bits in the Floating Point Status Control Register (FPSCR). This translation is currently done bit-by-bit. The compiler generates a series of conditional bit operations. Nicely, the "FE" exception bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit operation can instead be performed by a shift with appropriate masking.
2019-08-28nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-23Don't put non-ASCII into installed headersPaul Eggert
Move non-ASCII contributor names from installed headers into contrib.texi when possible, and when it's not (the copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h) go back to ASCIIfied names. Problem reported by Joseph Myers in: https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
2019-08-23Fix spellings of contributor names in comments and docPaul Eggert
2019-08-23[MIPS] Raise highest supported EI_ABIVERSION value [BZ #24916]Mihailo Stojanovic
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI. New testcase loads the symbol from the GOT with the "lb" instruction so that the EI_ABIVERSION header field of the shared object is set to ABSOLUTE (it doesn't actually check the value of the symbol), and makes sure that the main executable is executed without "ABI version invalid" error. Tested for all three ABIs (o32, n32, n64) using both static linker which handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION of the test module) and the one that doesn't (EI_ABIVERSION left as 0). [1] https://sourceware.org/ml/binutils/2018-07/msg00268.html [BZ #24916] * sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add tst-undefined-weak. [$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib. [$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency. * sysdeps/mips/tst-undefined-weak-lib.S: New file. * sysdeps/mips/tst-undefined-weak.c: Likewise. * sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION): Increment highest valid ABIVERSION value.
2019-08-23mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernelsDragan Mladjenovic
Linux/Mips kernels prior to 4.8 could potentially crash the user process when doing FPU emulation while running on non-executable user stack. Currently, gcc doesn't emit .note.GNU-stack for mips, but that will change in the future. To ensure that glibc can be used with such future gcc, without silently resulting in binaries that might crash in runtime, this patch forces RWX stack for all built objects if configured to run against minimum kernel version less than 4.8. * sysdeps/unix/sysv/linux/mips/Makefile (test-xfail-check-execstack): Move under mips-has-gnustack != yes. (CFLAGS-.o*, ASFLAGS-.o*): New rules. Apply -Wa,-execstack if mips-force-execstack == yes. * sysdeps/unix/sysv/linux/mips/configure: Regenerated. * sysdeps/unix/sysv/linux/mips/configure.ac (mips-force-execstack): New var. Set to yes for hard-float builds with minimum_kernel < 4.8.0 or minimum_kernel not set at all. (mips-has-gnustack): New var. Use value of libc_cv_as_noexecstack if mips-force-execstack != yes, otherwise set to no.
2019-08-23linux: Make profil_counter a compat_symbol (BZ#17726)Adhemerval Zanella
As indicated by Joseph's comment on BZ#17726, this symbol is most likely a historical ABI accident. This patch make it on both arm and sparc ABIs a compat_symbol. Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn sparc64-linux-gnu to see if the symbol is still present. * gmon/Versions (libc) [GLIBC_2.31]: New entry. * sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter): Make a compat_symbol. * sysdeps/unix/sysv/linux/sparc/profil-counter.h (__profil_counter_global): Likewise.
2019-08-23Refactor sigcontextinfo.hAdhemerval Zanella
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
2019-08-23Add RTLD_SINGLE_THREAD_P on generic single-thread.hAdhemerval Zanella
* sysdeps/generic/single-thread.h (RTLD_SINGLE_THREAD_P): Add definition.
2019-08-22powerpc: Fix typos and field name in commentsGustavo Romero
Fix a couple of typos and v_regs field name in mcontext_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and field name in mcontext_t struct. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2019-08-21Don't use the argument to time.Zack Weinberg
It doesn't make sense to remove all the internal uses of time. It's still a standard ISO C function, and its callers don't need sub-second resolution and would be unnecessarily complicated if they had to declare a struct timespec instead of just a time_t. However, a handful of places were using the vestigial "result" argument instead of the return value, which is slightly less efficient and also looks strange. Correct this. * misc/syslog.c (__vsyslog_internal) * time/getdate.c (__getdate_r) * time/tst_wcsftime.c (main): Use return value of time, not its argument. * string/strfry.c (strfry) * sysdeps/mach/sleep.c (__sleep): Remove unnecessary casts of NULL in calls to time.
2019-08-20Update i386 libm-test-ulpsAndreas Schwab
2019-08-19Do not print backtraces on fatal glibc errorsFlorian Weimer
If the process is in a bad state, we used to print backtraces in many cases. This is problematic because doing so could involve a lot of work, like loading libgcc_s using the dynamic linker, and this could itself be targeted by exploit writers. For example, if the crashing process was forked from a long-lived process, the addresses in the error message could be used to bypass ASLR. Commit ed421fca42fd9b4cab7c66e77894b8dd7ca57ed0 ("Avoid backtrace from __stack_chk_fail [BZ #12189]"), backtraces where no longer printed because backtrace_and_maps was always called with do_abort == 1. Rather than fixing this logic error, this change removes the backtrace functionality from the sources. With the prevalence of external crash handlers, it does not appear to be particularly useful. The crash handler may also destroy useful information for debugging. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-08-16nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-15nptl: Move pthread_attr_init implementation into libcFlorian Weimer
Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.
2019-08-15Make totalorder and totalordermag functions take pointer arguments.Joseph Myers
The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15login: Add nonstring attributes to struct utmp, struct utmpx [BZ #24899]Florian Weimer
Commit 7532837d7b03b3ca5b9a63d77a5bd81dd23f3d9c ("The -Wstringop-truncation option new in GCC 8 detects common misuses") added __attribute_nonstring__ to bits/utmp.h, but it did not update the parallel bits/utmpx.h header. In struct utmp, the nonstring attribute for ut_id was missing.
2019-08-15nptl: Remove pthread_self compatibility symbol from libpthreadFlorian Weimer
The symbol is no longer needed because since glibc 2.30, the dynamic loader continues searching for the symbol in libc.
2019-08-15nptl: Move pthread_attr_destroy implementation into libcFlorian Weimer
2019-08-15Update i386 libm-test-ulpsAndreas Schwab
2019-08-15nptl: Move pthread_equal implementation into libcFlorian Weimer
2019-08-14aarch64: Disable using DC ZVA in emag memsetFeng Xue
* sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD): Disable DC ZVA code if this macro is defined as zero. * sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD): Change to zero to disable using DC ZVA.
2019-08-13Declare most TS 18661-1 interfaces for C2X.Joseph Myers
C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
2019-08-13login: Assume that _HAVE_UT_* constants are trueFlorian Weimer
Make the GNU version of bits/utmp.h the generic version because all remaining ports use it (with a sysdeps override for Linux s390/s390x).
2019-08-07Add SYNC_FILE_RANGE_WRITE_AND_WAIT from Linux 5.2 to bits/fcntl-linux.h.Joseph Myers
This patch adds the SYNC_FILE_RANGE_WRITE_AND_WAIT constant from Linux 5.2 (a new name for a combination of existing bits, not actually a new kernel interface) to bits/fcntl-linux.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU] (SYNC_FILE_RANGE_WRITE_AND_WAIT): New macro.
2019-08-06s390: Fix Enable VDSO for static linkingStefan Liebler
The commit 5e855c8954014bca7b0d6f07312ec09553695ffd "s390: Enable VDSO for static linking" removed the definition of VDSO_SETUP which leads to not setup the vdso symbols. Instead it jumps to false addresses. This patch just re adds the removed VDSO_SETUP macro definition. ChangeLog: * sysdeps/unix/sysv/linux/s390/init-first.c (VDSO_SETUP): New define.
2019-08-05Add CLONE_PIDFD from Linux 5.2 to bits/sched.h.Joseph Myers
This patch adds the CLONE_PIDFD constant from Linux 5.2 to glibc's bits/sched.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/sched.h [__USE_GNU] (CLONE_PIDFD): New macro.
2019-08-05linux: Enable vDSO for static linking as default (BZ#19767)Adhemerval Zanella
This patch assumes static vDSO is supported as default, it is now supported on all current architectures that support vDSO. It allows removing both ALWAYS_USE_VSYSCALL define, which an architecture requires to explicit define and USE_VSYSCALL (which defines vDSO only for shared or if architecture defines ALWAYS_USE_VSYSCALL). Checked with a build against all affected ABIs. [BZ #19767] * sysdeps/unix/sysv/linux/aarch64/sysdep.h (ALWAYS_USE_VSYSCALL): Remove definition. * sysdeps/unix/sysv/linux/arm/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86/libc-vdso.h: Remove #if USE_VSYSCALL. * sysdeps/unix/sysv/linux/sysdep-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL, USE_VSYSCALL): Remove defitions.
2019-08-05sparc: Enable VDSO for static linkingAdhemerval Zanella
Checked on sparc64-linux-gnu and sparcv9-linux-gnu. [BZ #19767] * sysdeps/unix/sysv/linux/sparc/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (ALWAYS_USE_VSYSCALL): Define.
2019-08-05s390: Enable VDSO for static linkingAdhemerval Zanella
Although s390 only enables vDSO for dynamically linked elf binaries (arch/s390/kernel/vdso.c:217), there is no indication in the code or associated commit message for why not enable it for statically linked binaries as well. To double check, I rebuilt a kernel with the check removed and the vDSO does work for static build for supplied symbols. Checked on s390x-linux-gnu and s390-linux-gnu. [BZ #19767] * sysdeps/unix/sysv/linux/s390/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (ALWAYS_USE_VSYSCALL): Define. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise.
2019-08-05riscv: Enable VDSO for static linkingAdhemerval Zanella
Checked on riscv64-linux-gnu-rv64imafdc-lp64d qemu system with some static tests. [BZ #19767] * sysdeps/unix/sysv/linux/riscv/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (ALWAYS_USE_VSYSCALL): Define.
2019-08-05sh: Update libm-tests-ulpsAdhemerval Zanella
The make regen-ulps was done on a SH7785LCR. * sysdeps/sh/libm-test-ulps: Update.
2019-08-05login: Remove utmp backend jump tables [BZ #23518]Florian Weimer
There is just one file-based implementation, so this dispatch mechanism is unnecessary. Instead of the vtable pointer __libc_utmp_jump_table, use a non-negative file_fd as the indicator that the backend is initialized.
2019-08-02Update kernel version in comment in syscall-names.list.Joseph Myers
This patch updates the Linux kernel version in a comment in syscall-names.list to agree with the following "kernel" line. * sysdeps/unix/sysv/linux/syscall-names.list: Update comment.
2019-08-02Update Linux kernel version number in tst-mman-consts.py to 5.2.Joseph Myers
The tst-mman-consts.py test includes a kernel version number, to avoid failures because of newly added constants in the kernel (if kernel headers are newer than this version of glibc) or missing constants in the kernel (if kernel headers are older than this version of glibc). This patch updates it to 5.2 to reflect that the MAP_* constants in glibc are still current as of that kernel version. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux kernel version number to 5.2.
2019-08-01powerpc: Cleanup: use actual power8 assembly mnemonicsRaoni Fassina Firmino
Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had pre power8 compatible binutils hardcoded macros and were not using .machine power8. This patch should not have semantic changes, in fact it should have the same exact code generated. Tested that generated stripped shared objects are identical when using "strip --remove-section=.note.gnu.build-id". Checked on: - powerpc64le, power9, build-many-glibcs.py, gcc 6.4.1 20180104, binutils 2.26.2.20160726 - powerpc64le, power8, debian 9, gcc 6.3.0 20170516, binutils 2.28 - powerpc64le, power9, ubuntu 19.04, gcc 8.3.0, binutils 2.32 - powerpc64le, power9, opensuse tumbleweed, gcc 9.1.1 20190527, binutils 2.32 - powerpc64, power9, debian 10, gcc 8.3.0, binutils 2.31.1 Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-08-01hppa: Update libm-tests-ulpsAdhemerval Zanella
The make regen-ulps was done on a PA8900 with 8.3.0. * sysdeps/hppa/fpu/libm-test-ulps: Update.
2019-08-01Get new entropy on each attempt __gen_tempname (BZ #15813)Adhemerval Zanella
This is missing bit for fully fix BZ#15813 (the other two were fixed by 359653aaacad463). Checked on x86_64-linux-gnu. [BZ #15813] sysdeps/posix/tempname.c (__gen_tempname): get entrypy on each attempt.
2019-07-30Restore r31 setting in powerpc32 swapcontext.Joseph Myers
Commit ffe8a9a8318e1db225b22da8bc067408494bac5c, "powerpc: Remove rt_sigreturn usage on context function", removed from powerpc32 swapcontext a setting of r31 that is relied upon in subsequent code. I'm not sure why this didn't produce test failures in Adhemerval's 32-bit testing; in my (soft-float) testing in preparation for 2.30 release, I see several context-related failures FAIL: stdlib/tst-makecontext2 FAIL: stdlib/tst-makecontext3 FAIL: stdlib/tst-setcontext FAIL: stdlib/tst-setcontext2 FAIL: stdlib/tst-setcontext4 FAIL: stdlib/tst-setcontext7 FAIL: stdlib/tst-setcontext9 FAIL: stdlib/tst-swapcontext1 that did not appear in 2.29 testing. This patch restores the removed register setting in question, and thus fixes those failures. Tested for powerpc (soft-float). * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S (__CONTEXT_FUNC_NAME): Restore setting of r31.
2019-07-29Linux: Move getdents64 to <dirent.h>Florian Weimer
This matches the location of the declaration in musl. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-07-24x86-64: Compile branred.c with -mprefer-vector-width=128 [BZ #24603]H.J. Lu
When compiled with -O3 and AVX, GCC 8 and 9 optimize some loops in sysdeps/ieee754/dbl-64/branred.c with 256-bit vector instructions, which leads to store forward stall: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90579 There is no easy fix in compiler. This patch limits vector width to 128 bits to work around this issue. It improves performance of sin and cos by more than 40% on Skylake compiled with -O3 -march=skylake. Tested with GCC 7/8/9 on x86-64. [BZ #24603] * sysdeps/x86_64/configure.ac: Check if -mprefer-vector-width=128 works. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/fpu/Makefile (CFLAGS-branred.c): New. Set to -mprefer-vector-width=128 if supported.
2019-07-24Linux: Use in-tree copy of SO_ constants for !__USE_MISC [BZ #24532]Florian Weimer
The kernel changes for a 64-bit time_t on 32-bit architectures resulted in <asm/socket.h> indirectly including <linux/posix_types.h>. The latter is not namespace-clean for the POSIX version of <sys/socket.h>. This issue has persisted across several Linux releases, so this commit creates our own copy of the SO_* definitions for !__USE_MISC mode. The new test socket/tst-socket-consts ensures that the copy is consistent with the kernel definitions (which vary across architectures). The test is tricky to get right because CPPFLAGS includes include/libc-symbols.h, which in turn defines _GNU_SOURCE unconditionally. Tested with build-many-glibcs.py. I verified that a discrepancy in the definitions actually results in a failure of the socket/tst-socket-consts test.
2019-07-19Linux: Update syscall-names.list to Linux 5.2Florian Weimer
This adds the system call names fsconfig, fsmount, fsopen, fspick, move_mount, open_tree. Tested with build-many-glibcs.py.
2019-07-18nptl: Add POSIX-proposed _clock functions to hppa pthread.hAdhemerval Zanella
The pthread _clock functions that were recently added to nptl need to be declared in hppa's pthread.h too. After this change, the function declaration part of sysdeps/nptl/pthread.h and sysdeps/unix/sysv/linux/hppa/pthread.h are identical. * sysdeps/unix/sysv/linux/hppa/pthread.h: Add declarations of functions recently added to sysdeps/nptl/pthread.h: pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock and pthread_cond_clockwait. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-18nptl: Remove unnecessary forwarding of pthread_cond_clockwait from libcMike Crowe
In afe4de7d283ebd88157126c5494ce1796194c16e, I added forwarding functions from libc to libpthread for __pthread_cond_clockwait and pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These are unnecessary[1], since these functions aren't (yet) being called from within libc itself. Let's remove them. * nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and pthread_cond_clockwait forwarding functions. There are no internal users, so it is unnecessary to expose these functions in libc.so. * sysdeps/nptl/pthread-functions.h (pthread_functions): Remove unnecessary ptr___pthread_cond_clockwait member. * nptl/nptl-init.c (pthread_functions): Remove assignment of removed member. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> [1] https://sourceware.org/ml/libc-alpha/2017-10/msg00082.html
2019-07-12nptl: Remove futex_supports_exact_relative_timeoutsMike Crowe
The only implementation of futex_supports_exact_relative_timeouts always returns true. Let's remove it and all its callers. * nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code that is only useful if futex_supports_exact_relative_timeouts () returns false. * nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock): Likewise. * sysdeps/nptl/futex-internal.h: Remove comment about relative timeouts potentially being imprecise since it's no longer true. Remove declaration of futex_supports_exact_relative_timeouts. * sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation of futex_supports_exact_relative_timeouts. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed pthread_mutex_clocklockMike Crowe
Add POSIX-proposed pthread_mutex_clocklock function that works like pthread_mutex_timedlock but takes a clockid parameter to measure the abstime parameter against. * sysdeps/nptl/pthread.h: Add pthread_mutex_clocklock. * nptl/DESIGN-systemtap-probes.txt: Likewise. * nptl/pthread_mutex_timedlock.c (__pthread_mutex_clocklock_common): Rename from __pthread_mutex_timedlock and add clockid parameter. Pass this parameter to lll_clocklock and lll_clocklock_elision in place of CLOCK_REALTIME. (__pthread_mutex_clocklock): New function to add LIBC_PROBE and validate clockid parameter before calling __pthread_mutex_clocklock_common. (__pthread_mutex_timedlock): New implementation to add LIBC_PROBE and calls __pthread_mutex_clocklock_common passing CLOCK_REALTIME as the clockid. * nptl/Makefile: Add tst-mutex11.c. * nptl/tst-abstime.c (th): Add tests for pthread_mutex_clocklock. * nptl/tst-mutex11.c: New tests for passing invalid and unsupported clockid parameters to pthread_mutex_clocklock. * nptl/tst-mutex5.c (do_test_clock): Rename from do_test and take clockid parameter to indicate which clock to be used. Call pthread_mutex_timedlock or pthread_mutex_clocklock as appropriate. (do_test): Call do_test_clock to separately test pthread_mutex_timedlock, pthread_mutex_clocklock(CLOCK_REALTIME) and pthread_mutex_clocklock(CLOCK_MONOTONIC). * nptl/tst-mutex9.c: Likewise. * nptl/Versions (GLIBC_2.30): Add pthread_mutex_clocklock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Rename lll_timedlock to lll_clocklock and add clockid parameterMike Crowe
Rename lll_timedlock to lll_clocklock and add clockid parameter to indicate the clock that the abstime parameter should be measured against in preparation for adding pthread_mutex_clocklock. The name change mirrors the naming for the exposed pthread functions: timed => absolute timeout measured against CLOCK_REALTIME (or clock specified by attribute in the case of pthread_cond_timedwait.) clock => absolute timeout measured against clock specified in preceding parameter. * sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from lll_timedlock and add clockid parameter. (__lll_clocklock): Rename from __lll_timedlock and add clockid parameter. * sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock): Likewise. * nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from __lll_timedlock_wait and add clockid parameter. Use __clock_gettime rather than __gettimeofday so that clockid can be used. This means that conversion from struct timeval is no longer required. * sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait): Likewise. * sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to refer to __lll_clocklock_wait rather than __lll_timedlock_wait. * nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename from lll_timedlock_elision, add clockid parameter and use meaningful names for other parameters. (__pthread_mutex_timedlock): Pass CLOCK_REALTIME where necessary to lll_clocklock and lll_clocklock_elision. * sysdeps/unix/sysv/linux/powerpc/lowlevellock.h (lll_clocklock_elision): Rename from lll_timedlock_elision and add clockid parameter. (__lll_clocklock_elision): Rename from __lll_timedlock_elision and add clockid parameter. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/elision-timed.c (__lll_lock_elision): Call __lll_clocklock_elision rather than __lll_timedlock_elision. (EXTRAARG): Add clockid parameter. (LLL_LOCK): Likewise. * sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise. * sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed pthread_rwlock_clockrdlock & pthread_rwlock_clockwrlockMike Crowe
Add: int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) and: int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) which behave like pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock respectively, except they always measure abstime against the supplied clockid. The functions currently support CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other clock is specified. * sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and pthread_wrlock_clockwrlock. * nptl/Makefile: Build pthread_rwlock_clockrdlock.c and pthread_rwlock_clockwrlock.c. * nptl/pthread_rwlock_clockrdlock.c: Implement pthread_rwlock_clockrdlock. * nptl/pthread_rwlock_clockwrlock.c: Implement pthread_rwlock_clockwrlock. * nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add clockid parameter and verify that it indicates a supported clock on entry so that we fail even if it doesn't end up being used. Pass that clock on to futex_abstimed_wait when necessary. (__pthread_rwlock_wrlock_full): Likewise. * nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't be used because there's no timeout. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't be used because there is no timeout. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime uses that clock. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime uses that clock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock timeout tests to match the existing pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests. * nptl/tst-rwlock14.c (do_test): Likewise. * nptl/tst-rwlock6.c Invent verbose_printf macro, and use for ancillary output throughout. (tf): Accept thread_args structure so that rwlock, a clockid and function name can be passed to the thread. (do_test_clock): Rename from do_test. Accept clockid parameter to specify test clock. Use the magic clockid value of CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock should be tested, otherwise pass the specified clockid to pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * nptl/tst-rwlock7.c: Likewise. * nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept thread_args structure so that the (now int) thread number, the clockid and the function name can be passed to the thread. (do_test_clock): Renamed from do_test. Pass the necessary thread_args when creating the reader and writer threads. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * manual/threads.texi: Add documentation for pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>