aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/unix
AgeCommit message (Collapse)Author
2019-07-12nptl: Add POSIX-proposed pthread_rwlock_clockrdlock & pthread_rwlock_clockwrlockMike Crowe
Add: int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) and: int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) which behave like pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock respectively, except they always measure abstime against the supplied clockid. The functions currently support CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other clock is specified. * sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and pthread_wrlock_clockwrlock. * nptl/Makefile: Build pthread_rwlock_clockrdlock.c and pthread_rwlock_clockwrlock.c. * nptl/pthread_rwlock_clockrdlock.c: Implement pthread_rwlock_clockrdlock. * nptl/pthread_rwlock_clockwrlock.c: Implement pthread_rwlock_clockwrlock. * nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add clockid parameter and verify that it indicates a supported clock on entry so that we fail even if it doesn't end up being used. Pass that clock on to futex_abstimed_wait when necessary. (__pthread_rwlock_wrlock_full): Likewise. * nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't be used because there's no timeout. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't be used because there is no timeout. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime uses that clock. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime uses that clock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock timeout tests to match the existing pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests. * nptl/tst-rwlock14.c (do_test): Likewise. * nptl/tst-rwlock6.c Invent verbose_printf macro, and use for ancillary output throughout. (tf): Accept thread_args structure so that rwlock, a clockid and function name can be passed to the thread. (do_test_clock): Rename from do_test. Accept clockid parameter to specify test clock. Use the magic clockid value of CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock should be tested, otherwise pass the specified clockid to pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * nptl/tst-rwlock7.c: Likewise. * nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept thread_args structure so that the (now int) thread number, the clockid and the function name can be passed to the thread. (do_test_clock): Renamed from do_test. Pass the necessary thread_args when creating the reader and writer threads. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * manual/threads.texi: Add documentation for pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed pthread_cond_clockwaitMike Crowe
Add: int pthread_cond_clockwait (pthread_cond_t *cond, pthread_mutex_t *mutex, clockid_t clockid, const struct timespec *abstime) which behaves just like pthread_cond_timedwait except it always measures abstime against the supplied clockid. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and returns EINVAL if any other clock is specified. Includes feedback from many others. This function was originally proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group preferred the new name. * nptl/Makefile: Add tst-cond26 and tst-cond27 * nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait * sysdeps/nptl/pthread.h: Likewise * nptl/forward.c: Add __pthread_cond_clockwait * nptl/forward.c: Likewise * nptl/pthreadP.h: Likewise * sysdeps/nptl/pthread-functions.h: Likewise * nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add clockid parameter and comment describing why we don't need to check its value. Use that value when calling futex_abstimed_wait_cancelable rather than reading the clock from the flags. (__pthread_cond_wait): Pass unused clockid parameter. (__pthread_cond_timedwait): Read clock from flags and pass it to __pthread_cond_wait_common. (__pthread_cond_clockwait): Add new function with weak alias from pthread_cond_clockwait. * sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist * (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-cond11.c (run_test): Support testing pthread_cond_clockwait too by using a special magic CLOCK_USE_ATTR_CLOCK value to determine whether to call pthread_cond_timedwait or pthread_cond_clockwait. (do_test): Pass CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME. * ntpl/tst-cond26.c: New test for passing unsupported and * invalid clocks to pthread_cond_clockwait. * nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using struct timespec and pthread_cond_clockwait. * manual/threads.texi: Document pthread_cond_clockwait. The * comment was provided by Carlos O'Donell. [1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed sem_clockwaitMike Crowe
Add: int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec *abstime) which behaves just like sem_timedwait, but measures abstime against the specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and sets errno == EINVAL if any other clock is specified. * nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add clockid parameters to indicate the clock which abstime should be measured against. * nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c (__new_sem_wait): Pass CLOCK_REALTIME as clockid to __new_sem_wait_slow. * nptl/sem_clockwait.c: New file to implement sem_clockwait based on sem_timedwait.c. * nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for sem_clockwait.c to match those used for sem_timedwait.c. * sysdeps/pthread/semaphore.h: Add sem_clockwait. * nptl/Versions (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-sem17.c: Add new test for passing invalid clock to sem_clockwait. * nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait tests to also test sem_clockwait. * manual/threads.texi: Document sem_clockwait. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add clockid parameter to futex timed wait callsMike Crowe
In preparation for adding POSIX clockwait variants of timedwait functions, add a clockid_t parameter to futex_abstimed_wait functions and pass CLOCK_REALTIME from all callers for the time being. Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset which takes a clockid_t parameter rather than the magic clockbit. * sysdeps/nptl/lowlevellock-futex.h, sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that takes a clockid rather than a special clockbit. * sysdeps/nptl/lowlevellock-futex.h: Add lll_futex_supported_clockid so that client functions can check whether their clockid parameter is valid even if they don't ultimately end up calling lll_futex_clock_wait_bitset. * sysdeps/nptl/futex-internal.h, sysdeps/unix/sysv/linux/futex-internal.h (futex_abstimed_wait, futex_abstimed_wait_cancelable): Add clockid_t parameter to indicate which clock the absolute time passed should be measured against. Pass that clockid onto lll_futex_clock_wait_bitset. Add invalid clock as reason for returning -EINVAL. * sysdeps/nptl/futex-internal.h, sysdeps/unix/sysv/linux/futex-internal.h: Introduce futex_abstimed_supported_clockid so that client functions can check whether their clockid parameter is valid even if they don't ultimately end up calling futex_abstimed_wait. * nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove code to calculate relative timeout for __PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable. * nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full) (__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass additional CLOCK_REALTIME to futex_abstimed_wait_cancelable. * nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-10posix: Fix large mmap64 offset for mips64n32 (BZ#24699)Adhemerval Zanella
The fix for BZ#21270 (commit 158d5fa0e19) added a mask to avoid offset larger than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap, as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such x32, defines off_t being equal to off64_t). This leads to use the same mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum offset it can use with mmap64. This patch fixes by setting the high mask only for __NR_mmap2 usage. The posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The patch also change the test to check for an arch-specific header that defines the maximum supported offset. Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and mips64-n32-linux-gnu. [BZ #24699] * posix/tst-mmap-offset.c: Mention BZ #24699. (do_test_bz21270): Rename to do_test_large_offset and use mmap64_maximum_offset to check for maximum expected offset value. * sysdeps/generic/mmap_info.h: New file. * sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise. * sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff __NR_mmap2 is used.
2019-07-08dl-vdso: Add LINUX_4 HASH CODE to support nds32 vdso mechanismVincent Chen
* sysdeps/unix/sysv/linux/dl-vdso.h: Add LINUX_4 HASH code to support nds32 vdso mechanism. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-02nptl: Remove vfork IFUNC-based forwarder from libpthread [BZ #20188]Florian Weimer
With commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"), the dynamic linker will find the definition of vfork in libc and binds a vfork reference to that symbol, even if the soname in the version reference says that the symbol should be located in libpthread. As a result, the forwarder (whether it's IFUNC-based or a duplicate of the libc implementation) is no longer necessary. On older architectures, a placeholder symbol is required, to make sure that the GLIBC_2.1.2 symbol version does not go away, or is turned in to a weak symbol definition by the link editor. (The symbol version needs to preserved so that the symbol coverage check in elf/dl-version.c does not fail for old binaries.) mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols, the placeholder symbol is not needed there.
2019-06-28Linux: Use mmap instead of malloc in dirent/tst-getdents64Florian Weimer
malloc dirties the entire allocated memory region due to M_PERTURB in the test harness.
2019-06-28Replace PREPARE_VERSION macro with inline functionTobias Klauser
* sysdeps/unix/sysv/linux/dl-vdso.h (PREPARE_VERSION): Remove macro. (prepare_version_base): New helper inline function. (prepare_version): New macro replacing PREPARE_VERSION. (PREPARE_VERSION_KNOWN): Use prepare_version instead of PREPARE_VERSION. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-06-28io: Remove copy_file_range emulation [BZ #24744]Florian Weimer
The kernel is evolving this interface (e.g., removal of the restriction on cross-device copies), and keeping up with that is difficult. Applications which need the function should run kernels which support the system call instead of relying on the imperfect glibc emulation. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-06-27Linux: Adjust gedents64 buffer size to int range [BZ #24740]Florian Weimer
The kernel interface uses type unsigned int, but there is an internal conversion to int, so INT_MAX is the correct limit. Part of the buffer will always be unused, but this is not a problem. Such huge buffers do not occur in practice anyway. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-06-26Linux: Add nds32 specific syscalls to syscall-names.listVincent Chen
The nds32 creates two specific syscalls, udftrap and fp_udfiex_crtl, in kernel v5.0 and v5.2, respectively. Add these two syscalls to syscall-names.list.
2019-06-21Add missing VDSO_{NAME,HASH}_* macros and use them for PREPARE_VERSION_KNOWNTobias Klauser
Define all currently used Linux versions used for PREPARE_VERSION{,_KNOWN} in sysdeps/unix/sysv/linux/dl-vdso.h and use them instead of duplicating the versions and precomputed hashes across architecture specific files. * sysdeps/unix/sysv/linux/aarch64/gettimeofday.c (INIT_ARCH): Use PREPARE_VERSION_KNOWN. * sysdeps/unix/sysv/linux/aarch64/init-first.c: Likewise. * sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME_LINUX_2_6_39): New define. (VDSO_HASH_LINUX_2_6_39): Likewise. (VDSO_NAME_LINUX_4_9): Likewise. (VDSO_HASH_LINUX_4_9): Likewise. * sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (INIT_ARCH): Likewise. * sysdeps/unix/sysv/linux/powerpc/init-first.c (_libc_vdso_platform_setup): Likewise. * sysdeps/unix/sysv/linux/powerpc/time.c (INIT_ARCH): Likewise. * sysdeps/unix/sysv/linux/s390/init-first.c (_libc_vdso_platform_setup): Likewise. * sysdeps/unix/sysv/linux/x86_64/init-first.c (__vdso_platform_setup): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-06-19powerpc: Fix static-linked version of __ppc_get_timebase_freq [BZ #24640]Stan Shebs
__ppc_get_timebase_freq() always return 0 when using static linked glibc. This is a minimal example.c to reproduce: /******************************/ #include <inttypes.h> #include <stdint.h> #include <stdio.h> #include <sys/platform/ppc.h> int main() { uint64_t freq = __ppc_get_timebase_freq(); printf("Time Base frequency = %"PRIu64" Hz\n", freq); if (freq == 0) return -1; return 0; } /******************************/ Compile command: gcc -static example.c This bug has been reproduced, fixed and tested on all powerpc platforms (ppc32, ppc64 and ppc64le). The underlying code of __ppc_get_timebase_freq uses __get_timebase_freq that has a different implementation for shared and static version of glibc. In the static version, there is an incorrect sense in the if check for the fd returned when opening /proc/cpuinfo. This solution is mostly a cherry-pick from: commit 4791e4f773d060c1a37b27aac5b03cdfa9327afc Author: Stan Shebs <stanshebs@google.com> Date: Fri May 17 12:25:19 2019 -0700 Subject: Fix sense of a test in the static-linking version of ppc get_clockfreq That is in branch glibc/google/grte/v5-2.27/master and was mentioned for inclusion on master here: https://www.sourceware.org/ml/libc-alpha/2019-05/msg00409.html Adapted from original fix for get_clockfreq. That code was moved to get_timebase_freq. Also added a static-build testcase for __ppc_get_timebase_freq since the underlying function has different implementations for shared and static build. [BZ #24640] * sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c [!SHARED] (__get_timebase_freq): Fix sense of a test in the static-linking version. * sysdeps/unix/sysv/linux/powerpc/Makefile (tests-static): Add test-gettimebasefreq-static. (tests): Likewise. * sysdeps/unix/sysv/linux/powerpc/test-gettimebasefreq-static.c: New file.
2019-06-17m68k: Remove vDSO supportAdhemerval Zanella
Although defined in initial TLS/NPTL ABI for m68k and ColdFire [1], kernel support was never pushed upstream. This patch removes the unused m68k vDSO support. Checked with a build against m68k and m68k-coldfire and some basic tests on ARAnyM. * sysdeps/unix/sysv/linux/m68k/Makefile (sysdep_routines, sysdep-rtld-routines): Remove rules. * sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_PRIVATE]: Remove __vdso_atomic_cmpxchg_32 and __vdso_atomic_barrier. (ld) [GLIBC_PRIVATE]: __rtld___vdso_read_tp, __rtld___vdso_atomic_cmpxchg_32, and __rtld___vdso_atomic_barrier. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h (atomic_compare_and_exchange_val_acq, atomic_full_barrier): Remove vDSO path for SHARED. * sysdeps/unix/sysv/linux/m68k/init-first.c: Remove file. * sysdeps/unix/sysv/linux/m68k/libc-m68k-vdso.c: Likewise. * sysdeps/unix/sysv/linux/m68k/m68k-helpers.S: Likewise. * sysdeps/unix/sysv/linux/m68k/m68k-vdso.c: Likewise. * sysdeps/unix/sysv/linux/m68k/m68k-vdso.h: Likewise. * sysdeps/unix/sysv/linux/m68k/m68k-helpers.c: New file. [1] https://lists.debian.org/debian-68k/2007/11/msg00071.html
2019-06-14Linux: Fix __glibc_has_include use for <sys/stat.h> and statxFlorian Weimer
The identifier linux is used as a predefined macro, so the actually used path is 1/stat.h or 1/stat64.h. Using the quote-based version triggers a file lookup for /usr/include/bits/linux/stat.h (or whatever directory is used to store bits/statx.h), but since bits/ is pretty much reserved by glibc, this appears to be acceptable. This is related to GCC PR 80005: incorrect macro expansion of the argument of __has_include. Suggested by Zack Weinberg. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-06-13Add IPV6_ROUTER_ALERT_ISOLATE from Linux 5.1 to bits/in.h.Joseph Myers
This patch adds the new constant IPV6_ROUTER_ALERT_ISOLATE from Linux 5.1 to sysdeps/unix/sysv/linux/bits/in.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/in.h (IPV6_ROUTER_ALERT_ISOLATE): New macro.
2019-06-13Allow memset local PLT reference for powerpc soft-float.Joseph Myers
Some recent change on GCC mainline resulted in the localplt test failing for powerpc soft-float (not sure exactly when, as the failure appeared when there were other build test failures as well; <https://sourceware.org/ml/libc-testresults/2019-q2/msg00261.html> shows it remaining when other failures went away). The problem is a call to memset that GCC now generates in the libgcc long double code. Since memset is documented as a function GCC may always implicitly generate calls to, it seems reasonable to allow that local PLT reference (just like those for libgcc functions that GCC implicitly generates calls to and that are also exported from libc.so), which this patch does. Tested for powerpc soft-float with build-many-glibcs.py. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data: Allow memset in libc.so.
2019-06-12Linux: Deprecate <sys/sysctl.h> and sysctlFlorian Weimer
Now that there are no internal users of __sysctl left, it is possible to add an unconditional deprecation warning to <sys/sysctl.h>. To avoid a test failure due this warning in check-install-headers, skip the test for sys/sysctl.h. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-06-12<sys/stat.h>: Use Linux UAPI header for statx if available and usefulFlorian Weimer
This will automatically import new STATX_* constants. It also avoids a conflict between <sys/stat.h> and <linux/stat.h>.
2019-06-07Linux: Add getdents64 system callFlorian Weimer
No 32-bit system call wrapper is added because the interface is problematic because it cannot deal with 64-bit inode numbers and 64-bit directory hashes. A future commit will deprecate the undocumented getdirentries and getdirentries64 functions. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-06-06riscv: Do not use __has_include__Florian Weimer
The user-visible preprocessor construct is called __has_include.
2019-06-01arm: Remove ioperm/iopl/inb/inw/inl/outb/outw/outl supportFlorian Weimer
Linux only supports the required ISA sysctls on StrongARM devices, which are armv4 and no longer tested during glibc development and probably bit-rotted by this point. (No reported test results, and the last discussion of armv4 support was in the glibc 2.19 release notes.)
2019-06-01Linux: Add oddly-named arm syscalls to syscall-names.listFlorian Weimer
<asm/unistd.h> on arm defines the following macros: #define __ARM_NR_breakpoint (__ARM_NR_BASE+1) #define __ARM_NR_cacheflush (__ARM_NR_BASE+2) #define __ARM_NR_usr26 (__ARM_NR_BASE+3) #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) #define __ARM_NR_get_tls (__ARM_NR_BASE+6) These do not follow the regular __NR_* naming convention and have so far been ignored by the syscall-names.list consistency checks. This commit adds these names to the file, preparing for the availability of these names in the regular __NR_* namespace.
2019-05-29Remove unused get_clockfreq filesAdhemerval Zanella
The patch 6e8ba7fd574f meant to remove the all get_clockfreq.c. This patch removes the missing files for sparcv9 and x86_64. Checked against a build to x86_64-linux-gnu and sparcv9-linux-gnu. * sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/get_clockfreq.c: Remove file. * sysdeps/unix/sysv/linux/x86_64/get_clockfreq.c: Likewise.
2019-05-23Add F_SEAL_FUTURE_WRITE from Linux 5.1 to bits/fcntl-linux.h.Joseph Myers
This patch adds the new F_SEAL_FUTURE_WRITE constant from Linux 5.1 to bits/fcntl-linux.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU] (F_SEAL_FUTURE_WRITE): New macro.
2019-05-22Remove support for PowerPC SPE extension (powerpc*-*-*gnuspe*).Zack Weinberg
GCC 9 dropped support for the SPE extensions to PowerPC, which means powerpc*-*-*gnuspe* configurations are no longer buildable with that compiler. This ISA extension was peculiar to the “e500” line of embedded PowerPC chips, which, as far as I can tell, are no longer being manufactured, so I think we should follow suit. This patch was developed by grepping for “e500”, “__SPE__”, and “__NO_FPRS__”, and may not eliminate every vestige of SPE support. Most uses of __NO_FPRS__ are left alone, as they are relevant to normal embedded PowerPC with soft-float. * sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe* host type. * scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe and powerpc-*-linux-gnuspe-e500v1 from list of build configurations. * sysdeps/powerpc/powerpc32/e500: Recursively delete. * sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h: Delete. * sysdeps/powerpc/fpu_control.h: Remove SPE variant. Issue an #error if used with a compiler in SPE-float mode. * sysdeps/powerpc/powerpc32/__longjmp_common.S * sysdeps/powerpc/powerpc32/setjmp_common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Remove code to preserve SPE register state. * sysdeps/unix/sysv/linux/powerpc/elision-lock.c * sysdeps/unix/sysv/linux/powerpc/elision-trylock.c * sysdeps/unix/sysv/linux/powerpc/elision-unlock.c Remove __SPE__ ifndefs.
2019-05-21sysvipc: Add missing bit of semtimedop s390 consolidationAdhemerval Zanella
This patch add the missing SEMTIMEDOP_IPC_ARGS definions on powerpc and sparc ipc_priv.h. Checked on powerpc64le-linux-gnu and with a build for sparc64-linux-gnu. * sysdeps/unix/sysv/linux/powerpc/ipc_priv.h (SEMTIMEDOP_IPC_ARGS): New define. * sysdeps/unix/sysv/linux/sparc/sparc64/ipc_priv.h (SEMTIMEDOP_IPC_ARGS): Likewise.
2019-05-20sysvipc: Consolidate semtimedop s390Adhemerval Zanella
This patch consolidates the s390-32 semtimedop implementation by defining a arch-specific SEMTIMEDOP_IPC_ARGS to rearrange the arguments expected by s390 Linux kABI. The idea is to avoid have multiples semtimedop implementation changes for Linux v5.1 change to enable wire-up sysvipc support. Checked with a s390-linux-gnu and s390x-linux-gnu and checking that resulting semtimedop objects did not change. * sysdeps/unix/sysv/linux/ipc_priv.h (SEMTIMEDOP_IPC_ARGS): New define. * sysdpes/unix/sysv/linux/s390/ipc_priv.h: New file. * sysdeps/unix/sysv/linux/s390/semtimedop.c: Remove file. * sysdeps/unix/sysv/linux/semtimedop.c (semtimedop): Use SEMTIMEDOP_IPC_ARGS for calls with __NR_ipc.
2019-05-20sysvipc: Fix compat msgctl (BZ#24570)Adhemerval Zanella
The __IPC64 flags is meant to be used to enable the new sysv struct format when the architectures supports it (ARCH_WANT_IPC_PARSE_VERSION config flag on Linux kernel). This currently issue only affects alpha. [BZ #24570] * sysdeps/unix/sysv/linux/msgctl.c (__old_msgctl): Remove __IPC_64 usage.
2019-05-16Update kernel-features.h files for Linux 5.1.Joseph Myers
Linux 5.1 adds missing syscalls to the syscall table for many Linux kernel architectures. This patch updates the kernel-features.h headers accordingly. __ASSUME_DIRECT_SYSVIPC_SYSCALLS is not updated because of the differences between new and old syscalls described in <https://sourceware.org/ml/libc-alpha/2019-05/msg00235.html>. The statfs64 structure used by alpha matches what the new kernel syscalls use. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/alpha/kernel-features.h (__ASSUME_STATFS64): Only undefine if [__LINUX_KERNEL_VERSION < 0x050100]. * sysdeps/unix/sysv/linux/ia64/kernel-features.h (__ASSUME_STATX): Likewise. * sysdeps/unix/sysv/linux/sh/kernel-features.h (__ASSUME_STATX): Likewise.
2019-05-14Linux: Add the tgkill functionFlorian Weimer
The tgkill function is sometimes used in crash handlers. <bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h> (which was added for the gettid system call wrapper). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-05-14x86: Remove arch-specific low level lock implementationAdhemerval Zanella
This patch removes the arch-specific x86 assembly implementation for low level locking and consolidate both 64 bits and 32 bits in a single implementation. Different than other architectures, x86 lll_trylock, lll_lock, and lll_unlock implements a single-thread optimization to avoid atomic operation, using cmpxchgl instead. This patch implements by using the new single-thread.h definitions in a generic way, although using the previous semantic. The lll_cond_trylock, lll_cond_lock, and lll_timedlock just use atomic operations plus calls to lll_lock_wait*. For __lll_lock_wait_private and __lll_lock_wait the generic implemtation there is no indication that assembly implementation is required performance-wise. Checked on x86_64-linux-gnu and i686-linux-gnu. * sysdeps/nptl/lowlevellock.h (__lll_trylock): New macro. (lll_trylock): Call __lll_trylock. * sysdeps/unix/sysv/linux/i386/libc-lowlevellock.S: Remove file. * sysdeps/unix/sysv/linux/i386/lll_timedlock_wait.c: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/libc-lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lll_timedlock_wait.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86/lowlevellock.h: New file. * sysdeps/unix/sysv/linux/x86_64/cancellation.S: Include lowlevellock-futex.h.
2019-05-14Add single-thread.h headerAdhemerval Zanella
This patch move the single-thread syscall optimization defintions from syscall-cancel.h to new header file single-thread.h and also move the cancellation definitions from pthreadP.h to syscall-cancel.h. The idea is just simplify the inclusion of both syscall-cancel.h and single-thread.h (without the requirement of including all pthreadP.h defintions). No semantic changes expected, checked on a build for all major ABIs. * nptl/pthreadP.h (CANCEL_ASYNC, CANCEL_RESET, LIBC_CANCEL_ASYNC, LIBC_CANCEL_RESET, __libc_enable_asynccancel, __libc_disable_asynccancel, __librt_enable_asynccancel, __libc_disable_asynccancel, __librt_enable_asynccancel, __librt_disable_asynccancel): Move to ... * sysdeps/unix/sysv/linux/sysdep-cancel.h: ... here. (SINGLE_THREAD_P, RTLD_SINGLE_THREAD_P): Move to ... * sysdeps/unix/sysv/linux/single-thread.h: ... here. * sysdeps/generic/single-thread.h: New file. * sysdeps/unix/sysdep.h: Include single-thread.h. * sysdeps/unix/sysv/linux/futex-internal.h: Include sysdep-cancel.h. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
2019-05-07Update syscall-names.list for Linux 5.1.Joseph Myers
This patch updates syscall-names.list for Linux 5.1 (which has many new syscalls, mainly but not entirely ones for 64-bit time). Tested with build-many-glibcs.py (before the revert of the move to Linux 5.1 there; verified there were no tst-syscall-list failures). * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 5.1. (clock_adjtime64) New syscall. (clock_getres_time64) Likewise. (clock_gettime64) Likewise. (clock_nanosleep_time64) Likewise. (clock_settime64) Likewise. (futex_time64) Likewise. (io_pgetevents_time64) Likewise. (io_uring_enter) Likewise. (io_uring_register) Likewise. (io_uring_setup) Likewise. (mq_timedreceive_time64) Likewise. (mq_timedsend_time64) Likewise. (pidfd_send_signal) Likewise. (ppoll_time64) Likewise. (pselect6_time64) Likewise. (recvmmsg_time64) Likewise. (rt_sigtimedwait_time64) Likewise. (sched_rr_get_interval_time64) Likewise. (semtimedop_time64) Likewise. (timer_gettime64) Likewise. (timer_settime64) Likewise. (timerfd_gettime64) Likewise. (timerfd_settime64) Likewise. (utimensat_time64) Likewise.
2019-05-02misc: Add twalk_r functionFlorian Weimer
The twalk function is very difficult to use in a multi-threaded program because there is no way to pass external state to the iterator function. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-04-17mips: Remove rt_sigreturn usage on context functionAdhemerval Zanella
Similar to powerpc, mips also issues rt_sigreturn for setcontext case the v0 value saved is not the one set by setcontext or makecontext. As for powerpc, it is intention is no really supported since setcontext is not async-signal-safe. Checked the context tests on mips64-linux-gnu and mips-linux-gnu. * sysdeps/unix/sysv/linux/mips/getcontext.S (__getcontext): Remove the magic flag store. * sysdeps/unix/sysv/linux/mips/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/mips/swapcontext.S (__swapcontext): Likewise. * sysdeps/unix/sysv/linux/mips/setcontext.S (__setcontext): Remove rt_sigreturn call.
2019-04-17powerpc: Remove rt_sigreturn usage on context functionAdhemerval Zanella
As described in a recent glibc thread [1], the rt_sigreturn syscall on setcontext and swapcontext is not used on default use and its intention is no really supported since neither setcontext nor swapcontext are async-signal-safe. Checked on powerpc64-linux-gnu and powerpc-linux-gnu. * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S: Remove rt_sigreturn call. * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S: Likewie. * sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S: Likewise. [1] https://sourceware.org/ml/libc-alpha/2019-02/msg00367.html
2019-04-01alpha: Do not redefine __NR_shmat or __NR_osf_shmatRichard Henderson
Fixes build using v5.1-rc1 headers. The kernel has cleaned up how these are defined. Previous behavior was to define __NR_osf_shmat as 209 and not define __NR_shmat. Current behavior is to define __NR_shmat as 209 and then define __NR_osf_shmat as __NR_shmat. * sysdeps/unix/sysv/linux/alpha/kernel-features.h (__NR_shmat): Do not redefine. * sysdeps/unix/sysv/linux/alpha/sysdep.h (__NR_osf_shmat): Do not redefine.
2019-03-30RISC-V: Fix `test' operand error with soft-float ABI being configuredMaciej W. Rozycki
Fix a: .../sysdeps/unix/sysv/linux/riscv/configure: line 181: test: =: unary operator expected message produced by the RISC-V configure fragment with the soft-float ABI selected, caused by $libc_cv_riscv_float_abi evaluating to nil in the invocation of `test $libc_cv_riscv_float_abi = no'. * sysdeps/unix/sysv/linux/riscv/configure.ac: Quote $libc_cv_riscv_float_abi in `test' invocation. * sysdeps/unix/sysv/linux/riscv/configure: Regenerate.
2019-03-22Remove __get_clockfreqAdhemerval Zanella
With clock_getres, clock_gettime, and clock_settime refactor to remove the generic CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID support through hp-timing, there is no usage of internal __get_clockfreq. This patch removes both generic and Linux implementation.. Checked with a build against aarch64-linux-gnu, i686-linux-gnu, ia64-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu-power4. * include/libc-internal.h (__get_clockfreq): Remove prototype. * rt/Makefile (clock-routines): Remove get_clockfreq. * rt/get_clockfreq.c: Remove file. * sysdeps/unix/sysv/linux/i386/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/ia64/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Move code to ... * sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c: ... here.
2019-03-22linux: Assume clock_getres CLOCK_{PROCESS,THREAD}_CPUTIME_IDAdhemerval Zanella
The Linux 3.2 clock_getres kernel code (kernel/posix-cpu-timers.c) issued for clock_getres CLOCK_PROCESS_CPUTIME_ID (process_cpu_clock_getres) and CLOCK_THREAD_CPUTIME_ID (thread_cpu_clock_getres) call posix_cpu_clock_getres. And it fails on check_clock only if an invalid clock is used (not the case) or if we pass an invalid the pid/tid in 29 msb of clock_id (not the case either). This patch assumes that clock_getres syscall always support CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID, so there is no need to fallback to hp-timing support for _SC_MONOTONIC_CLOCK neither to issue the syscall to certify the clock_id is supported bt the kernel. This allows simplify the sysconf support to always use the syscall. it also removes ia64 itc drift check and assume kernel handles it correctly. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. * sysdeps/unix/sysv/linux/ia64/has_cpuclock.c: Remove file. * sysdeps/unix/sysv/linux/ia64/sysconf.c: Likewise. * sysdeps/unix/sysv/linux/sysconf.c (has_cpuclock): Remove function. (__sysconf): Assume kernel support for _SC_MONOTONIC_CLOCK, _SC_CPUTIME, and _SC_THREAD_CPUTIME.
2019-03-22nptl: Remove pthread_clock_gettime pthread_clock_settimeAdhemerval Zanella
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support from clock_gettime and clock_settime generic implementation. For Linux, kernel already provides supports through the syscall and Hurd HTL lacks __pthread_clock_gettime and __pthread_clock_settime internal implementation. As described in clock_gettime man-page [1] on 'Historical note for SMP system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers is error-prone and susceptible to timing and accurary issues that the libc can not deal without kernel support. This allows removes unused code which, however, still incur in some runtime overhead in thread creation (the struct pthread cpuclock_offset initialization). If hurd eventually wants to support them it should either either implement as a kernel facility (or something related due its architecture) or in system specific implementation. Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also checked on a i686-gnu build. * nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and pthread_clock_settime. * nptl/pthreadP.h (__find_thread_by_id): Remove prototype. * elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. (_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting. * elf/rtld.c (_dl_start_final): Likewise. * nptl/allocatestack.c (__find_thread_by_id): Remove function. * sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove. * nptl/descr.h (struct pthread): Rename cpuclock_offset to cpuclock_offset_ununsed. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove cpuclock_offset set. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * nptl/pthread_clock_gettime.c: Remove file. * nptl/pthread_clock_settime.c: Likewise. * sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function. [HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support. * sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise. [HP_TIMING_AVAIL] (realtime_gettime): Likewise. * sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise. [HP_TIMING_AVAIL] (__clock_getres): Likewise. * sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P): Likewise. (__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage. [1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
2019-03-22S390: Add new hwcap values for new cpu architecture arch13.Stefan Liebler
The new hwcap values indicate support for: -"Vector-Enhancements Facility 2" (tag "vxe2", hwcap 2^15) -"Vector-Packed-Decimal-Enhancement Facility" (tag "vxp", hwcap 2^16) -"Enhanced-Sort Facility" (tag "sort", hwcap 2^17) -"Deflate-Conversion Facility" (tag "dflt", hwcap 2^18) The vxe2 hwcap is also marked as important hwcap. ChangeLog: * sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add vxe2, vxp, dflt, sort flags. * sysdeps/s390/dl-procinfo.h: Add HWCAP_S390_VXRS_EXT2, HWCAP_S390_VXRS_PDE, HWCAP_S390_SORT, HWCAP_S390_DFLT capabilities. (HWCAP_IMPORTANT): Add HWCAP_S390_VXRS_EXT2. * sysdeps/unix/sysv/linux/s390/bits/hwcap.h (HWCAP_S390_VXRS_EXT2, HWCAP_S390_VXRS_PDE, HWCAP_S390_SORT, HWCAP_S390_DFLT): Define.
2019-03-19Add AArch64 HWCAPs from Linux 5.0.Joseph Myers
This patch adds new AArch64 HWCAPs from Linux 5.0 to the AArch64 bits/hwcap.h and dl-procinfo.c. Tested (compilation only) with build-many-glibcs.py for aarch64-linux-gnu. * sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SB): New macro. (HWCAP_PACA): Likewise. (HWCAP_PACG): Likewise. * sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT): Increase to 32. (_dl_aarch64_cap_flags): Add new entries for new HWCAPs.
2019-03-15Update syscall-names.list for Linux 5.0.Joseph Myers
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for Linux 5.0. Based on testing with build-many-glibcs.py, the only new entry needed is for old_getpagesize (a newly added __NR_* name for an old syscall on ia64). (Because 5.0 changes how syscall tables are handled in the kernel, checking diffs wasn't a useful way of looking for new syscalls in 5.0 as most of the syscall tables were moved to the new representation without actually adding any syscalls to them.) Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 5.0. (old_getpagesize): New syscall.
2019-03-14Remove obsolete, never-implemented XSI STREAMS declarationsFlorian Weimer
The stub implementations are turned into compat symbols. Linux actually has two reserved system call numbers (for getpmsg and putpmsg), but these system calls have never been implemented, and there are no plans to implement them, so this patch replaces the wrappers with the generic stubs. According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>, the presence of the XSI STREAMS declarations is a minor portability hazard because they are not actually implemented. This commit does not change the TIRPC support code in sunrpc/rpc_svcout.c. It uses additional XTI functionality and therefore never worked with glibc. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-03-13Fix output of LD_SHOW_AUXV=1.Stefan Liebler
Starting with commit 1616d034b61622836d3a36af53dcfca7624c844e the output was corrupted on some platforms as _dl_procinfo was called for every auxv entry and on some architectures like s390 all entries were represented as "AT_HWCAP". This patch is removing the condition and let _dl_procinfo decide if an entry is printed in a platform specific or generic way. This patch also adjusts all _dl_procinfo implementations which assumed that they are only called for AT_HWCAP or AT_HWCAP2. They are now just returning a non-zero-value for entries which are not handled platform specifc. ChangeLog: * elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always call _dl_procinfo. * sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo): Ignore types other than AT_HWCAP. * sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise. * sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo): Likewise. * sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment in the case of falling back to generic output mechanism. * sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo): Likewise.
2019-03-11C-SKY: mark lr as undefined to stop unwindingMao Han
Mark the lr register as undefined at the start of execution, so unwind will stop at this frame. run-backtrace-*.sh from elfutils testsuite will fail without this patch. * sysdeps/csky/abiv2/start.S: Mark lr as undefined. * sysdeps/unix/sysv/linux/csky/abiv2/clone.S: Likewise. * sysdeps/unix/sysv/linux/csky/abiv2/setcontext.S: Likewise.
2019-03-11C-SKY: remove user_regs definitionMao Han
C-SKY GDB dose not use this file for ptrace and coredump. ptrace can use pt_regs definition from linux kernel directly. The old definition only got 34 regs instead of 38 regs from linux kernel, which will corrupted the memory after ptrace PTRACE_GETREGSET call. * sysdeps/unix/sysv/linux/csky/sys/procfs.h: Use linux definition directly. * sysdeps/unix/sysv/linux/csky/sys/user.h: Remove user_regs definition.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 09:42:28 +0000