aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/unix
AgeCommit message (Collapse)Author
2016-11-28Partial ILP32 support for aarch64.Steve Ellcey
* sysdeps/aarch64/crti.S: Add include of sysdep.h. (call_weak_fn): Use PTR_REG to get correct reg name in ILP32. * sysdeps/aarch64/dl-irel.h: Add include of sysdep.h. (elf_irela): Use AARCH64_R macro to get correct relocation in ILP32. * sysdeps/aarch64/dl-machine.h: Add include of sysdep.h. (elf_machine_load_address, RTLD_START, RTLD_START_1, RTLD_START, elf_machine_type_class, ELF_MACHINE_JMP_SLOT, elf_machine_rela, elf_machine_lazy_rel): Add ifdef's for ILP32 support. * sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return, _dl_tlsdesc_return_lazy, _dl_tlsdesc_dynamic, _dl_tlsdesc_resolve_hold): Extend pointers in ILP32, use PTR_REG to get correct reg name for ILP32. * sysdeps/aarch64/dl-trampoline.S (ip01): New Macro. (RELA_SIZE): New Macro. (_dl_runtime_resolve, _dl_runtime_profile): Use new macros and PTR_REG to support ILP32. * sysdeps/aarch64/jmpbuf-unwind.h (_JMPBUF_CFA_UNWINDS_ADJ): Add cast for ILP32 mode. * sysdeps/aarch64/memcmp.S (memcmp): Extend arg pointers for ILP32 mode. * sysdeps/aarch64/memcpy.S (memmove, memcpy): Ditto. * sysdeps/aarch64/memset.S (__memset): Ditto. * sysdeps/aarch64/strchr.S (strchr): Ditto. * sysdeps/aarch64/strchrnul.S (__strchrnul): Ditto. * sysdeps/aarch64/strcmp.S (strcmp): Ditto. * sysdeps/aarch64/strcpy.S (strcpy): Ditto. * sysdeps/aarch64/strlen.S (__strlen): Ditto. * sysdeps/aarch64/strncmp.S (strncmp): Ditto. * sysdeps/aarch64/strnlen.S (strnlen): Ditto. * sysdeps/aarch64/strrchr.S (strrchr): Ditto. * sysdeps/unix/sysv/linux/aarch64/clone.S: Ditto. * sysdeps/unix/sysv/linux/aarch64/setcontext.S (__setcontext): Ditto. * sysdeps/unix/sysv/linux/aarch64/swapcontext.S (__swapcontext): Ditto. * sysdeps/aarch64/__longjmp.S (__longjmp): Extend pointers in ILP32, change PTR_MANGLE call to use register numbers instead of names. * sysdeps/unix/sysv/linux/aarch64/getcontext.S (__getcontext): Ditto. * sysdeps/aarch64/setjmp.S (__sigsetjmp): Extend arg pointers for ILP32 mode, change PTR_MANGLE calls to use register numbers. * sysdeps/aarch64/start.S (_start): Ditto. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (__PTHREAD_RWLOCK_INT_FLAGS_SHARED): New define. (__SIZEOF_PTHREAD_ATTR_T, __SIZEOF_PTHREAD_MUTEX_T, __SIZEOF_PTHREAD_MUTEXATTR_T, __SIZEOF_PTHREAD_COND_T, __SIZEOF_PTHREAD_COND_COMPAT_T, __SIZEOF_PTHREAD_CONDATTR_T, __SIZEOF_PTHREAD_RWLOCK_T, __SIZEOF_PTHREAD_RWLOCKATTR_T, __SIZEOF_PTHREAD_BARRIER_T, __SIZEOF_PTHREAD_BARRIERATTR_T): Make defined values dependent on __ILP32__. * sysdeps/aarch64/nptl/bits/semaphore.h (__SIZEOF_SEM_T): Change define. (sem_t): Change __align type. * sysdeps/aarch64/sysdep.h (AARCH64_R, PTR_REG, PTR_LOG_SIZE, DELOUSE, PTR_SIZE): New Macros. (LDST_PCREL, LDST_GLOBAL) Update to use PTR_REG. * sysdeps/unix/sysv/linux/aarch64/bits/fcntl.h (O_LARGEFILE): Set when in ILP32 mode. (F_GETLK64, F_SETLK64, F_SETLKW64): Only set in LP64 mode. * sysdeps/unix/sysv/linux/aarch64/dl-cache.h (DL_CACHE_DEFAULT_ID): Set elf flags for ILP32. (add_system_dir): Set ILP32 library directories. * sysdeps/unix/sysv/linux/aarch64/init-first.c (_libc_vdso_platform_setup): Set minimum kernel version for ILP32. * sysdeps/unix/sysv/linux/aarch64/ldconfig.h (SYSDEP_KNOWN_INTERPRETER_NAMES): Add ILP32 names. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (GET_PC, SET_PC): New Macros. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Handle ILP32 pointers.
2016-11-28Fix for [f]statfs64/[f]statfs aliasing patchSteve Ellcey
* sysdeps/unix/sysv/linux/fstatfs64.c: Reorder include files, only alias fstatfs and __fstatfs if STATFS_IS_STATFS64 is non-zero. * sysdeps/unix/sysv/linux/statfs64.c: Ditto for statfs and __statfs.
2016-11-28Do not include asm/cachectl.h in nios2 sys/cachectl.h.Joseph Myers
The nios2 sys/cachectl.h includes a kernel header asm/cachectl.h, which does not exist, so causing the check-installed-headers tests to fail. This patch removes the include of a nonexistent header. Tested (compilation only) for nios2. * sysdeps/unix/sysv/linux/nios2/sys/cachectl.h: Do not include <asm/cachectl.h>.
2016-11-24Add setpayloadsig, setpayloadsigf, setpayloadsigl.Joseph Myers
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-11-24Remove cached PID/TID in cloneAdhemerval Zanella
This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
2016-11-22Allow [f]statfs64 to alias [f]statfsSteve Ellcey
* sysdeps/unix/sysv/linux/fstatfs64.c: Hide prototypes for fstatfs and __fstatfs. Make them aliases of __fstatfs64 if STATFS_IS_STATFS64 is set to non-zero. * sysdeps/unix/sysv/linux/statfs64.c: Ditto for __statfs, statfs, and __statfs64. * sysdeps/unix/sysv/linux/generic/wordsize-32/fstatfs.c: Do not define __fstatfs and fstatfs if STATFS_IS_STATFS64 is non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/statfs.c: Ditto for __statfs and statfs. * sysdeps/unix/sysv/linux/alpha/kernel_stat.h: Set STATFS_IS_STATFS64 to 0. * sysdeps/unix/sysv/linux/generic/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/ia64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/s390/s390-64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/x86_64/kernel_stat.h: Ditto.
2016-11-21Always define XSTAT_IS_XSTAT64Steve Ellcey
* sysdeps/unix/sysv/linux/generic/kernel_stat.h: Set XSTAT_IS_XSTAT64 to 0 when in 32 bit mode. * sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Set XSTAT_IS_XSTAT64 to 0. * sysdeps/unix/sysv/linux/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/fxstat.c: Replace #ifdef with #if on XSTAT_IS_XSTAT64 test. * sysdeps/unix/sysv/linux/fxstatat.c: Ditto. * sysdeps/unix/sysv/linux/generic/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/generic/xstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/fxstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/fxstatat.c: Ditto. * sysdeps/unix/sysv/linux/i386/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/xstat.c: Ditto. * sysdeps/unix/sysv/linux/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/mips/xstatconv.c: Ditto. * sysdeps/unix/sysv/linux/xstat.c: Ditto. * sysdeps/unix/sysv/linux/xstatconv.c: Ditto.
2016-11-19Add setpayload, setpayloadf, setpayloadl.Joseph Myers
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-11-18Make tile's set_dataplane API compatibility-onlyChris Metcalf
The set_dataplane() API in <sys/dataplane.h> originally supported the Tilera version of Linux as shipped to our customers. Once we started upstreaming the dataplane support in the kernel, the API changed to use fcntl() as part of the current task-isolation patch series. It doesn't seem like continuing to support the old API is useful for newly-compiled code, and even supporting the old glibc binary API on an upstream kernel that supports the new task isolation mode isn't straightforward, since the semantics have changed in ways that make it hard to map the old semantics precisely to the new ones, so just return ENOSYS.
2016-11-17Consolidate Linux setrlimit and getrlimit implementationAdhemerval Zanella
This patch consolidates all Linux setrlimit and getrlimit on the default sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions: 1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19 and higher due a broken RLIM64_INFINITY constant. 2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB limit. I am not sure if it is required, but a RLIM_INFINITY fix [1] change its definition without adding a compat symbol. This patch does not aim to address this possible issue, it follow current symbol export. The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64) and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This code path is only used on kernel older than 2.6.36 (basically now only x86) and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once x86 moves to be on par with other architectures regarding minimum kernel supported we can get rid of using old syscalls and default path. A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as default for 64 bits ports. This allows the default implementation to avoid {get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit. Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a sanity build plus check-abi on all other supported architectures. [1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8 Adhemerval Zanella <adhemerval.zanella@linaro.org> Yury Norov <ynorov@caviumnetworks.com> * bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define. * sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/typesizes.h [__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource] (sysdep_routines): Remove oldgetrlimit64. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file. * sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise. * sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove setrlimit and getrlimit. * sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/getrlimit.c: New file. * sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle __RLIM_T_MATCHES_RLIM64_T and add alias if defined. (__old_getrlimit64): Add compatibility symbol. * sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-11-17Make Alpha <sys/user.h> self-contained.Joseph Myers
The check-installed-headers tests show up that the Alpha <sys/user.h> is not self-contained, using size_t without including any header that defines it. This patch fixes it by including <stddef.h>, as done for other architectures' versions of this header. Tested for Alpha (compilation only). * sysdeps/unix/sysv/linux/alpha/sys/user.h: Include <stddef.h>.
2016-11-16New internal function __access_noerrnoAdhemerval Zanella
Implement an internal version of __access called __access_noerrno that avoids setting errno. This is useful to check accessibility of files very early on in process startup i.e. before TLS setup. This allows tunables to replace MALLOC_CHECK_ safely (i.e. check existence of /etc/suid-debug to enable/disable MALLOC_CHECK) and at the same time initialize very early so that it can override IFUNCs. Checked on x86_64. * hurd/hurd.h (__hurd_fail_noerrno): New function. * include/unistd.h [IS_IN (rtld) || !defined SHARED]: Declare __access_noerrno. * io/access.c (__access_noerrno): New function. * sysdeps/mach/hurd/access.c (hurd_fail_seterrno): New function. (hurd_fail_seterrno): Likewise. (access_common): Likewise. (__access_noerrno): Likewise. * sysdeps/nacl/access.c (__access_noerrno): Likewise. * sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise. * sysdeps/nacl/nacl-interfaces.h (NACL_CALL_NOERRNO): New macro.
2016-11-16Fix SH4 register-dump.h for soft-float.Joseph Myers
This patch fixes SH4 register-dump.h to declare a variable inside the the build for soft-float. Tested (compilation only) for SH4 soft-float. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h (register_dump): Only declare fpregs if [__SH_FPU_ANY__].
2016-11-15Make SH ucontext always match current kernels.Joseph Myers
As discussed in the thread starting at <https://sourceware.org/ml/libc-alpha/2015-06/msg00657.html>, there are various problems with the sigcontext / mcontext / ucontext structures on SH. The soft-float SH4 case in fact does not build at present, with errors processing sysdeps/unix/sysv/linux/sh/sh4/ucontext_i.sym with gen-as-const.awk ("error: 'mcontext_t {aka struct <anonymous>}' has no member named 'fpregs'"). Linux 4.8 (commit bbe6c77857c38f4acbdc4fc70399515226d1859a) moved to always using the same sigcontext structure on SH, with room for floating-point registers whether or not present on the processor. This patch makes the glibc header match. Tested (compilation only) for sh4-linux-gnu hard float, and in conjunction with other fixes for soft float. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h [__SH4__ || __SH4A__]: Make code unconditional. [!(__SH4__ || __SH4A__)]: Remove conditional code.
2016-11-14Make tilegx32 install libraries in lib32 directories.Joseph Myers
This patch makes tilegx32 install libraries in lib32 directories, matching what GCC expects and avoiding conflict with 64-bit libraries installed in lib directories. Tested (compilation only) for tilegx (32-bit and 64-bit, BE and LE, GCC 5). * sysdeps/unix/sysv/linux/tile/tilegx/configure.ac: Use LIBC_SLIBDIR_RTLDDIR for tilegx32. * sysdeps/unix/sysv/linux/tile/tilegx/configure: Regenerated.
2016-11-11Make SH <sys/user.h> self-contained.Joseph Myers
The check-installed-headers tests show up that the SH <sys/user.h> is not self-contained, using size_t without including any header that defines it. This patch fixes it by including <stddef.h>, as done for other architectures' versions of this header. Tested for SH3 and SH4 (compilation only). * sysdeps/unix/sysv/linux/sh/sys/user.h: Include <stddef.h>.
2016-11-10Fix sh4 build with __ASSUME_ST_INO_64_BIT redefinitionAdhemerval Zanella
Since 327792c sh4 builds fails with: ../sysdeps/unix/sysv/linux/kernel-features.h:49:0: error: "__ASSUME_ST_INO_64_BIT" redefined [-Werror] #define __ASSUME_ST_INO_64_BIT 1 ^ In file included from ../sysdeps/unix/sysv/linux/sysdep.h:19:0, from ../sysdeps/unix/sysv/linux/sh/sysdep.h:24, from ../sysdeps/unix/sysv/linux/sh/sh4/sysdep.h:4, from <stdin>:1: ../sysdeps/unix/sysv/linux/sh/kernel-features.h:47:0: note: this is the location of the previous definition #define __ASSUME_ST_INO_64_BIT 0 It is because sh4 kernel-features.sh is included multiple times without guards and this patch fixes by adding them. Tested on a sh4-linux-gnu build. * sysdeps/unix/sysv/linux/sh/kernel-features.h: Add include guards.
2016-11-10Consolidate Linux access implementationAdhemerval Zanella
This patch consolidates the Linux access implementation on sysdeps/unix/sysv/linux/access.c. Similar to auto-generation through syscalls.list, __NR_access is check and __NR_faccessat is used only for newer architectures (where __NR_access is not defined). Checked on x86_64. * sysdeps/unix/sysv/linux/access.c: New file. * sysdeps/unix/sysv/linux/generic/access.c: Remove file.
2016-11-09Consolidate Linux truncate implementationsAdhemerval Zanella
This patch consolidates all Linux truncate implementation on sysdeps/unix/sysv/linux/truncate{64}.c. It is based on {INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction. General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not defined, otherwise ftruncate64 will be build and ftruncate will be an alias. The fallocate will use old compat syscall and pass 32-bit off_t argument, while fallocate64 will handle the correct off64_t passing using __ALIGNMENT_ARG and SYSCALL_LL64 macros. Tested on x86_64, i386, aarch64, and armhf. * sysdeps/unix/sysv/linux/arm/truncate64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/truncate.c: Likewise. * sysdeps/sysv/linux/generic/wordsize-32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/truncate.c: New file. * sysdeps/unix/sysv/linux/truncate64.c (truncate64): Use INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (truncate): Remove. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (truncate): Likewise. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-09Consolidate Linux ftruncate implementationsAdhemerval Zanella
THis patch consolidates all Linux ftruncate implementation on sysdeps/unix/sysv/linux/ftruncate{64}.c. It is based on {INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction. General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not defined, otherwise ftruncate64 will be build and ftruncate will be an alias. The fallocate will use old compat syscall and pass 32-bit off_t argument, while fallocate64 will handle the correct off64_t passing using __ALIGNMENT_ARG and SYSCALL_LL64 macros. Tested on x86_64, i386, aarch64, and armhf. * posix/tst-truncate-common.c: New file. * posix/tst-truncate.c: Use tst-truncate-common.c. * posix/tst-truncate64.c: Likewise and add LFS tests. * sysdeps/unix/sysv/linux/arm/ftruncate64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/ftruncate.c: New file. * sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Use INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros. [__OFF_T_MATCHES_OFF64_T] (ftruncate): Add alias. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (ftruncate): Remove. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (ftruncate): Likewise. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-08Add localplt.data for sh.Joseph Myers
This patch adds a localplt.data file for sh so that test passes. The architecture-specific entries are for _Unwind_Find_FDE, _exit and __errno_location. Tested for sh3 and sh4. * sysdeps/unix/sysv/linux/sh/localplt.data: New file.
2016-11-08Add localplt.data for hppa.Joseph Myers
This patch adds a localplt.data file for hppa so that test passes. Architecture maintainers should feel free to clean up the sysdeps code so that some or all of the system-specific entries libc.so: _exit libc.so: __sigsetjmp libc.so: _IO_funlockfile libc.so: sigprocmask libc.so: __errno_location libpthread.so: __errno_location are no longer needed. Tested for hppa. Note: check-execstack and check-textrel still fail; you may wish to look at those to get to a clean baseline there (they are less obvious for people not familiar with the architecture). * sysdeps/unix/sysv/linux/hppa/localplt.data: New file.
2016-11-08Update alpha localplt.data.Joseph Myers
This patch updates alpha localplt.data so the localplt test passes in my compile-only all-ABIs glibc testing. The failures I see without this patch are: Missing required PLT reference: ld.so: __tls_get_addr Missing required PLT reference: ld.so: free Now, __tls_get_addr can be made optional. For free, rather than making it optional as in libc.so it seems better to mark all the malloc-related symbols in both libc.so and ld.so as allowing an R_ALPHA_GLOB_DAT relocation as an alternative to using a PLT entry, so this patch does so. Tested for alpha. * sysdeps/unix/sysv/linux/alpha/localplt.data: Make __tls_get_addr optional in ld.so. Allow R_ALPHA_GLOB_DAT relocation for malloc, calloc, realloc, free, memalign and __libc_memalign rather than making them optional.
2016-11-08Update nios2 localplt.data.Joseph Myers
This patch updates nios2 localplt.data so the localplt test passes in my compile-only all-ABIs glibc testing. A new PLT entry for __extendsfdf2 is added. Tested for nios2. * sysdeps/unix/sysv/linux/nios2/localplt.data: Add __extendsfdf2 for libc.so.
2016-11-08Consolidate lseek/lseek64/llseek implementationsAdhemerval Zanella
This patch consolidates all Linux lseek/lseek64/llseek implementation in on on sysdeps/unix/sysv/linux/lseek{64}.c. It also removes the llseek file and instead consolidate the LFS lseek implementation on lseek64.c as for other LFS symbols implementations. The general idea is: - lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek. ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol. - lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek (since it will use 64-bit arguments without low/high splitting) and __NR__llseek if __NR_lseek is not defined (for some ILP32 ports). - llseek: files will be removed and symbols will be aliased ot lseek64. ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32 so far) are covered by building lseek with off_t as expected and lseek64 using __NR_lseek (as expected for off64_t being passed using 64-bit registers). For this consolidation I mantained the x32 assembly specific implementation because to correctly fix this it would required both the x32 fix for {INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to return 64 bits instead of default 32 bits (as for times). It could a future cleanup. It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2], although it is mainly for simplification. Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * nptl/Makefile (libpthread-routines): Remove ptw-llseek and add ptw-lseek64. * sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek. * sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise. * sysdeps/unix/sysv/linux/llseek.c: Remove file. * sysdeps/unix/sysv/linux/lseek.c: New file. * sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and __libc_lseek64 from auto-generation. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html [2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-07Define __ASSUME_ST_INO_64_BIT on all platforms.Steve Ellcey
* sysdeps/unix/sysv/linux/alpha/kernel-features.h: #define __ASSUME_ST_INO_64_BIT as 0 * sysdeps/unix/sysv/linux/sh/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/fxstat64.c: Replace #ifdef with #if over the code where __ASSUME_ST_INO_64_BIT is used. * sysdeps/unix/sysv/linux/lxstat64.c: Likewise. * sysdeps/unix/sysv/linux/xstat64.c: Likewise. * sysdeps/unix/sysv/linux/xstatconv.c: Likewise.
2016-11-07nptl: Document the reason why __kind in pthread_mutex_t is part of the ABIFlorian Weimer
2016-11-04Fix sparc build due missing __WORDSIZE_TIME64_COMPAT32 definitionAdhemerval Zanella
This patch adds the missing Linux sparc definitions from d060cd0. Both value are copied from default sparc value [1] and with this fix now both sparc 32 and 64 bits builds on Linux. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h (__WORDSIZE_TIME64_COMPAT32): Define for both 32 and 64 bits. [1] sysdeps/sparc/sparc{32,64}/bits/wordsize.h
2016-11-04Make MIPS <sys/user.h> self-contained.Joseph Myers
The check-installed-headers tests show up that the MIPS <sys/user.h> is not self-contained, using size_t without including any header that defines it. This patch fixes it by including <stddef.h>, as done for other architectures' versions of this header. Tested for MIPS (all 24 ABIs, compilation only). * sysdeps/unix/sysv/linux/mips/sys/user.h: Include <stddef.h>.
2016-11-04XFAIL check-execstack for MIPS.Joseph Myers
This patch marks the check-execstack test as expected to fail for MIPS, with a comment referencing previous RFC discussion of the changes that would be needed to support non-executable stacks on MIPS. Tested for MIPS (all 24 ABIs). * sysdeps/unix/sysv/linux/mips/Makefile [$(subdir) = elf] (test-xfail-check-execstack): New variable.
2016-11-04Define wordsize.h macros everywhereSteve Ellcey
* bits/wordsize.h: Add documentation. * sysdeps/aarch64/bits/wordsize.h : New file * sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update definitions. (SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check. * sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check with #if instead of #ifdef. * sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto. * sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG, __WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32): Add or change defines. * sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise. * sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h: Likewise. * sysdeps/s390/s390-64/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc32/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc64/bits/wordsize.h: Likewise. * sysdeps/tile/tilegx/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise. * sysdeps/wordsize-32/bits/wordsize.h: Likewise. * sysdeps/wordsize-64/bits/wordsize.h: Likewise. * sysdeps/x86/bits/wordsize.h: Likewise.
2016-10-28powerpc: Fix TOC stub on powerpc64 clone()Tulio Magno Quites Machado Filho
Use a function call to _exit() so that the linker can create a TOC stub instead of just a branch. Tested on powerpc64.
2016-10-28i386: Support CFLAGS which imply -fno-omit-frame-pointer [BZ #20729]Florian Weimer
2016-10-27Fix a sparc header conformtest failure.David S. Miller
* sysdeps/unix/sysv/linux/sparc/sys/user.h: Include stddef.h
2016-10-26Add canonicalize, canonicalizef, canonicalizel.Joseph Myers
TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-25Add strfromd, strfromf, and strfroml functionsGabriel F. T. Gomes
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib. This patch adds strfromd, strfromf, and strfroml. This is being done in preparation for the new floating-point type, float128. The added functions convert a floating-point value into a string, with configurable format.
2016-10-24 * sysdeps/unix/sysv/linux/fxstat.c: Remove useless cast.Yury Norov
* sysdeps/unix/sysv/linux/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/xstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/fxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/xstat.c: Likewise.
2016-10-24Fix Linux sh4 pread/pwrite argument passingAdhemerval Zanella
Although conceptually correct for p{read,write}{64} offset argument passing, sh4 implementation does not generate the correct expected code. The __ALIGNMENT_ARG redefinition is incorrect for two reasons: 1. the kernel-features.h header is included multiple times (since it contains no guards) and 2. the value it redefines is also incorrect (should be '0, ' instead of empty definition). This patch fixes it by adding another macro, SYSCALL_LL_PRW{64}, meant to be used to pass the offset argument on p{read,write}64. It is basically the already define SYSCALL_LL{64} plus __ALIGNMENT_ARG unless __ASSUME_PRW_DUMMY_ARG is define. In this case an empty dummy argument is used regardless how __ALIGNMENT_ARG is defined (sh4 case). Checked on x86_64, i686, aarch64, armhf, and powerpc64le (basically a sanity check). Also, John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> and James Clarke <jrtc27@jrtc27.com> help me check on a debian sh4 bootstrap using 2.24 plus this patch to verify it also corrected fixed the regression issue. I also verified the generated object for a 2.24 build and master with this patch for sh4 and both look identical. * sysdeps/unix/sysv/linux/pread.c (__libc_pread): Use SYSCALL_LL_PRW. * sysdeps/unix/sysv/linux/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/pread64.c (__libc_pread64): Use SYSCALL_LL64_PRW. * sysdeps/unix/sysv/linux/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/sh/kernel-features.h: Define __ASSUME_PRW_DUMMY_ARG. * sysdeps/unix/sysv/linux/sh/pread.c: Remove file. * sysdeps/unix/sysv/linux/sh/pread64.c: Likewise. * sysdeps/unix/sysv/linux/sh/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/sysdep.h: Define SYSCALL_LL_PRW and SYSCALL_LL_PRW64 based on __ASSUME_PRW_DUMMY_ARG.
2016-10-24Fix -Wformat-length warning in tst-setgetname.cSteve Ellcey
* sysdeps/unix/sysv/linux/tst-setgetname.c: Increase buffer size.
2016-10-19Add getpayload, getpayloadf, getpayloadl.Joseph Myers
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-18Fix Linux fallocate tests for EOPNOTSUPPAdhemerval Zanella
The fallocate syscall might fail on Linux due missing support from underlying filesystem (for instance some NFS versions). This patch adds this check for fallocate tests. It also moves tst-fallocate{64} to 'io' folder (since it is on fallocate{64} is built). Checked on x86_64. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = math] (tests): Move tst-fallocate{64}. * sysdeps/unix/sysv/linux/tst-fallocate-common.c: Check for EOPNOTSUPP on syscall return.
2016-10-15hppa: Optimize atomic_compare_and_exchange_val_acqJohn David Anglin
Changelog: * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Don't include abort-instr.h. (EFAULT): Remove conditional define. (ENOSYS): Likewise. (atomic_compare_and_exchange_val_acq): Use instruction nullification instead of conditional branch instructions.
2016-10-15Add totalordermag, totalordermagf, totalordermagl.Joseph Myers
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-12Fix posix_fadvise64 build on mips64n64Adhemerval Zanella
Recent binutils versions (at least 2.27) complains about libc.so when linking sotruss-lib.so with: libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64@GLIBC_2.2' libc.so::(.text+0xcf940): first defined here libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64' collect2: error: ld returned 1 exit status Dynamic symbols for libc.so shows (readelf --dyn-syms): 262: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@GLIBC_2.2 417: 000000000010b950 28 FUNC WEAK DEFAULT 12 posix_fadvise64@@GLIBC_2.2 1505: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@@GLIBC_2.3.3 That is, two separate definitions at version GLIBC_2.2. The issue is sysdeps/unix/sysv/linux/posix_fadvise64.c creates posix_fadvise64 weak_alias, while sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c then adds compat_symbol / versioned_symbol calls. The patch remove the weak_alias definition on mips64 specific version so direct weak_alias is disabled. Checked on mips64n64 build with binutils 2.27.51.20161012. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c: Undefine weak_alias.
2016-10-12Add totalorder, totalorderf, totalorderl.Joseph Myers
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-11Consolidate Linux sync_file_range implementationsAdhemerval Zanella
This patch consolidates all the sync_file_range implementation for Linux in only one (sysdeps/unix/sysv/linux/sync_file_range.c). It also removes the syscall from the auto-generation using assembly macros (except for x86_64 due x32 [1]). For current minimum supported kernel (2.6.32 for x86_64 and 3.2 for all other architectures) either sync_file_range or sync_file_range2 is supported and it is expected that any future Linux ABI will provide either of one syscall. So the code path that returns ENOSYS in the case of missing syscall is removed. Checked on x86_64, i386, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-sync_file_range. * sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c: Remove file. * sysdeps/sysv/linux/powerpc/powerpc64/sync_file_range.c: Likewise. * sysdeps/unix/sysv/linux/sync_file_range.c: New file. * sysdeps/unix/sysv/linux/tst-sync_file_range.c (sync_file_range): Consolidate all Linux implementations. [1] https://patchwork.ozlabs.org/patch/659794/
2016-10-07Consolidate posix_fadvise implementationsAdhemerval Zanella
This patch consolidates mostly of the Linux posix_fadvise{64} implementations on sysdeps/unix/sysv/linux/posix_fadvise{64}.c. It still keeps arch-specific files for: * S390-32: it uses a packed structure to pass all the arguments on syscall. It is the only supported port that implements __NR_fadvise64_64 in this way. * ARM: it does not implement __NR_fadvise64 (as other 32-bits ports), so posix_fadvise calls internal posix_fadvise64 symbol. * MIPS64 n64: it requires a different version number that other ports. The new macro SYSCALL_LL{64} is used to handle the offset argument and INTERNAL_SYSCALL_CALL to handle passing the correct number of expect arguments. The default Linux adds two new defines a port can use to control how __NR_fadvise64_64 passes the kernel arguments: * __ASSUME_FADVISE64_64_6ARG: the 'advise' argument is moved on second position. This is the case of powerpc32 and arm to avoid implement 7 argument syscall. * __ASSUME_FADVISE64_64_NO_ALIGN: for ABIs that defines __ASSUME_ALIGNED_REGISTER_PAIRS packs the offset without the leading '0'. This is the case of tile 32 bits. ARM also defines __NR_fadvise64_64 as __NR_arm_fadvise64_64 (which is also handled on arch kernel-feature.h). Tested on x86_64, x32, i686, armhf, and aarch64. * posix/Makefile (tests): Add tst-posix_fadvise and tst-posix_fadvise64. * posix/tst-posix_fadvise.c: New file. * posix/tst-posix_fadvise64.c: Likewise. * posix/tst-posix_fadvise-common.c: Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h (__ASSUME_FADVISE64_64_6ARG): Define. * sysdeps/unix/sysv/linux/powerpc/kernel-features.h [!__powerpc64__] (__ASSUME_FADVISE64_64_6ARG): Add define. * sysdeps/unix/sysv/linux/arm/posix_fadvise64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/i386/posix_fadvise64.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]: Alias to __posix_fadvise64_l32. (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l32]: Add compat definition to posix_fadvise64. (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]: Add versioned definition to posix_fadvise64. * sysdeps/unix/sysv/linux/posix_fadvise.c (posix_fadvise): Build iff __OFF_T_MATCHES_OFF64_T is defined, use INTERNAL_SYSCALL_CALL, add __ASSUME_FADVISE64_64_6ARG/__ASSUME_FADVISE64_64_NO_ALIGN support. * sysdeps/unix/sysv/linux/posix_fadvise64.c (posix_fadvise64): Add __ASSUME_FADVISE64_64_NO_ALIGN support and use INTERNAL_SYSCALL_CALL.
2016-10-07Consolidate posix_fallocate{64} implementationsAdhemerval Zanella
This patch consolidates all the posix_fallocate{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/posix_fallocate{64}.c). It also removes the syscall from the auto-generation using assembly macros. The macro SYSCALL_LL{64} is used to handle the offset argument along with the new INTERNAL_SYSCALL_CALL macro to define correct argument count for internal INTERNAL_SYSCALL call. Tested on x86_64, i686, x32, aarch64, ppc64le, and armhf. * io/Makefile (tests): Add tst-posix_fallocate and tst-posix_fallocate64. * io/tst-posix_fallocate-common.c: New file. * io/tst-posix_fallocate.c: Likewise. * io/tst-posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/posix_fallocate.c (posix_fallocate): Use SYSCALL_LL to pass both offset and len arguments. * sysdeps/unix/sysv/linux/posix_fallocate64.c (posix_fallocate64): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (pwrite64): Add __libc_pwrite64 alias used by posix_fallocate64.
2016-10-07Consolidate fallocate{64} implementationsAdhemerval Zanella
This patch consolidates all the fallocate{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/fallocate{64}.c). It also removes the syscall from the auto-generation using assembly macros. The new macro SYSCALL_LL{64} is used to handle the offset argument. Checked on x86_64, x32, i386, aarch64, and ppc64le. * sysdeps/unix/sysv/linux/Makefile (test): Add tst-fallocate and tst-fallocate64. * sysdeps/unix/sysv/linux/tst-fallocate.c: New file. * sysdeps/unix/sysv/linux/tst-fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/tst-fallocate-common.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/fallocate.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/fallocate.c (fallocate): Use SYSCALL_LL macro on offset argument. * sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Use SYSCALL_LL64 on offset argument. * test-skeleton.c (FAIL_RET): Add macro. (FAIL_EXIT): Likewise. (FAIL_EXIT1): Likewise. (_FAIL): Likewise.
2016-10-07Use libc_ifunc macro for siglongjmp, longjmp in libpthread.Stefan Liebler
This patch uses the libc_ifunc macro to create already existing ifunc functions longjmp_ifunc, siglongjmp_ifunc if HAVE_IFUNC is defined. The s390 pt-longjmp.c includes the common pt-longjmp.c and uses strong_alias to create the longjmp, siglongjmp symbols for glibc version 2.19. ChangeLog: * nptl/pt-longjmp.c (DEFINE_LONGJMP): Use libc_ifunc macro. * sysdeps/unix/sysv/linux/s390/pt-longjmp.c (longjmp, siglongjmp): Use strong_alias to create symbols for glibc verison 2.19.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:52:38 +0000