aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/unix/sysv/linux/sparc/sparc32
AgeCommit message (Collapse)Author
2020-09-11linux: Define STAT64_IS_KERNEL_STAT64Adhemerval Zanella
It indicates that the glibc export stat64 is similar in size and layout of the kernel stat64 used on the syscall. It is not currently used on stat implementation, but the idea is to indicate whether to use the kernel_stat to issue on the syscall on the *stat*64 variant (more specifically on mips which its exported ABI does not match the kernel). Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-11linux: Always define STAT_IS_KERNEL_STATAdhemerval Zanella
It allows to check for its value instead of its existence. Checked with a build for all affected ABIS. Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-08-07Update syscall lists for Linux 5.8.Joseph Myers
Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list and regenerate the arch-syscall.h headers with build-many-glibcs.py update-syscalls. Tested with build-many-glibcs.py.
2020-07-16Linux: Remove rseq supportFlorian Weimer
The kernel ABI is not finalized, and there are now various proposals to change the size of struct rseq, which would make the glibc ABI dependent on the version of the kernels used for building glibc. This is of course not acceptable. This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf: Support at least 32-byte alignment in static dlopen"), commit 8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use rseq in sched_getcpu if available"), and commit 0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq registration at C startup and thread creation"), resolving the conflicts introduced by the ARC port and the TLS static surplus changes. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-07-09sysv: linux: Add 64-bit time_t variant for msgctlAdhemerval Zanella
To provide a y2038 safe interface a new symbol __msgctl64 is added and __msgctl is change to call it instead (it adds some extra buffer coping for the 32 bit time_t implementation). Two new structures are added: 1. kernel_msqid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit msgctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes msqid_ds already contains 64-bit time_t fields and will result in just the __msgctl symbol using the __msgctl64 code. The msgid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit time_t. The default 32-bit symbol will allocate and copy the msqid_ds over multiple buffers, but this should be deprecated in favor of the __msgctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-09sysv: linux: Add 64-bit time_t variant for semctlAdhemerval Zanella
Different than others 64-bit time_t syscalls, the SysIPC interface does not provide a new set of syscall for y2038 safeness. Instead it uses unused fields in semid_ds structure to return the high bits for the timestamps. To provide a y2038 safe interface a new symbol __semctl64 is added and __semctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_semid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, sparc32) require specific implementations due their kernel ABI. 2. semid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit semctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes semid_ds already contains 64-bit time_t fields and will result in just the __semctl symbol using the __semctl64 code. The semid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low handling. It might be possible to optimize it further to avoid the kernel_semid64_ds to semun transformation if the exported ABI for the architectures matches the expected kernel ABI, but the implementation is already complex enough and don't think this should be a hotspot in any case. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit one. The default 32-bit symbol will allocate and copy the semid_ds over multiple buffers, but this should be deprecated in favor of the __semctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2020-07-07string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-07-07string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-07-06Add the __libc_single_threaded variableFlorian Weimer
The variable is placed in libc.so, and it can be true only in an outer libc, not libcs loaded via dlmopen or static dlopen. Since thread creation from inner namespaces does not work, pthread_create can update __libc_single_threaded directly. Using __libc_early_init and its initial flag, implementation of this variable is very straightforward. A future version may reset the flag during fork (but not in an inner namespace), or after joining all threads except one. Reviewed-by: DJ Delorie <dj@redhat.com>
2020-07-06Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers
Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
2020-06-19New exp10f version without SVID compat wrapperAdhemerval Zanella
This patch changes the exp10f error handling semantics to only set errno according to POSIX rules. New symbol version is introduced at GLIBC_2.32. The old wrappers are kept for compat symbols. There are some outliers that need special handling: - ia64 provides an optimized implementation of exp10f that uses ia64 specific routines to set SVID compatibility. The new symbol version is aliased to the exp10f one. - m68k also provides an optimized implementation, and the new version uses it instead of the sysdeps/ieee754/flt32 one. - riscv and csky uses the generic template implementation that does not provide SVID support. For both cases a new exp10f version is not added, but rather the symbols version of the generic sysdeps/ieee754/flt32 is adjusted instead. Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu.
2020-06-02nptl: Add pthread_attr_setsigmask_np, pthread_attr_getsigmask_npFlorian Weimer
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2020-05-20nptl: Move pthread_gettattr_np into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Use __getline instead of __getdelim to avoid a localplt failure. Likewise for __getrlimit/getrlimit. The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_getattr_np F" >> $x done python3 scripts/move-symbol-to-libc.py --only-linux pthread_getattr_np The private export of __pthread_getaffinity_np is no longer needed, but the hidden alias still necessary so that the symbol can be exported with versioned_symbol. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2020-05-20nptl: Move pthread_getaffinity_np into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_getaffinity_np F" >> $x done python3 scripts/move-symbol-to-libc.py pthread_getaffinity_np Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2020-05-20nptl: Move pthread_attr_setaffinity_np into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> The symbol did not previously exist in libc, so a new GLIBC_2.32 symbol is needed, to get correct dependency for binaries which use the symbol but no longer link against libpthread. The abilist updates were performed by: git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \ | while read x ; do echo "GLIBC_2.32 pthread_attr_setaffinity_np F" >> $x done python3 scripts/move-symbol-to-libc.py pthread_attr_setaffinity_np Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2020-04-30Rename __LONG_DOUBLE_USES_FLOAT128 to __LDOUBLE_REDIRECTS_TO_FLOAT128_ABIPaul E. Murphy
Improve the commentary to aid future developers who will stumble upon this novel, yet not always perfect, mechanism to support alternative formats for long double. Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to __LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work has settled down. The command used was git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \ xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g' Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2020-04-21nptl: Move pthread_sigmask implementation to libcAdhemerval Zanella
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> A new symbol version is added on libc to force loading failure instead of lazy binding one for newly binaries with old loaders. Checked with a build against all affected ABIs.
2020-04-03Update syscall lists for Linux 5.6.Joseph Myers
Linux 5.6 has new openat2 and pidfd_getfd syscalls. This patch adds them to syscall-names.list and regenerates the arch-syscall.h files. Tested with build-many-glibcs.py.
2020-03-06sparc: Move sigreturn stub to assemblyAdhemerval Zanella
It seems that some gcc versions might generates a stack frame for the sigreturn stub requires on sparc signal handling. For instance: $ cat test.c #define _GNU_SOURCE #include <sys/syscall.h> __attribute__ ((__optimize__ ("-fno-stack-protector"))) void __sigreturn_stub (void) { __asm__ ("mov %0, %%g1\n\t" "ta 0x10\n\t" : /* no outputs */ : "i" (SYS_rt_sigreturn)); } $ gcc -v [...] gcc version 9.2.1 20200224 (Debian 9.2.1-30) $ gcc -O2 -m64 test.c -S -o - [...] __sigreturn_stub: save %sp, -176, %sp #APP ! 9 "t.c" 1 mov 101, %g1 ta 0x10 ! 0 "" 2 #NO_APP .size __sigreturn_stub, .-__sigreturn_stub As indicated by kernel developers [1], the sigreturn stub can not change the register window or the stack pointer since the kernel has setup the restore frame at a precise location relative to the stack pointer when the stub is invoked. I tried to play with some compiler flags and even with _Noreturn and __builtin_unreachable after the asm does not help (and Sparc does not support naked functions). To avoid similar issues, as the stack-protector support also have stumbled, this patch moves the implementation of the sigreturn stubs to assembly. Checked on sparcv9-linux-gnu and sparc64-linux-gnu with gcc 9.2.1 and gcc 7.5.0. [1] https://lkml.org/lkml/2016/5/27/465
2020-02-20nptl: Move pthread_setschedparam implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_getschedparam implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_cond_init implementation into libcFlorian Weimer
It is necessary to export __pthread_cond_init from libc because the C11 condition variable needs it and is still left in libpthread. This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_cond_destroy implementation into libcFlorian Weimer
It is necessary to export __pthread_cond_destroy from libc because the C11 condition variable needs it and is still left in libpthread. This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_condattr_init implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_condattr_destroy implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_attr_setscope implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_attr_getscope implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_attr_setschedpolicy implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-20nptl: Move pthread_attr_getschedpolicy implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-02-15ld.so: Do not export free/calloc/malloc/realloc functions [BZ #25486]Florian Weimer
Exporting functions and relying on symbol interposition from libc.so makes the choice of implementation dependent on DT_NEEDED order, which is not what some compiler drivers expect. This commit replaces one magic mechanism (symbol interposition) with another one (preprocessor-/compiler-based redirection). This makes the hand-over from the minimal malloc to the full malloc more explicit. Removing the ABI symbols is backwards-compatible because libc.so is always in scope, and the dynamic loader will find the malloc-related symbols there since commit f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so: Support moving versioned symbols between sonames [BZ #24741]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-02-14sparc: Use Linux kABI for syscall returnAdhemerval Zanella
It changes the sparc internal_syscall* macros to return a negative value instead of the 'g1' register value in the 'err' macro argument. The __SYSCALL_STRING macro is also changed to no set the 'g1' value, since 'o1' already holds all the required information to check if syscall has failed. The macro INTERNAL_SYSCALL_DECL is no longer required, and the INTERNAL_SYSCALL_ERROR_P macro follows the other Linux kABIs. The redefinition of INTERNAL_VSYSCALL_CALL is also no longer required. Checked on sparc64-linux-gnu and sparcv9-linux-gnu. It fixes the sporadic issues on sparc32 where clock_nanosleep does not act as cancellation entrypoint.
2020-01-02Linux: Use system call tables during buildFlorian Weimer
Use <arch-syscall.h> instead of <asm/unistd.h> to obtain the system call numbers. A few direct includes of <asm/unistd.h> need to be removed (if the system call numbers are already provided indirectly by <sysdep.h>) or replaced with <sys/syscall.h>. Current Linux headers for alpha define the required system call names, so most of the _NR_* hacks are no longer needed. For the 32-bit arm architecture, eliminate the INTERNAL_SYSCALL_ARM macro, now that we have regular system call names for cacheflush and set_tls. There are more such cleanup opportunities for other architectures, but these cleanups are required to avoid macro redefinition errors during the build. For ia64, it is desirable to use <asm/break.h> directly to obtain the break number for system calls (which is not a system call number itself). This requires replacing __BREAK_SYSCALL with __IA64_BREAK_SYSCALL because the former is defined as an alias in <asm/unistd.h>, but not in <asm/break.h>. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2020-01-02Linux: Add tables with system call numbersFlorian Weimer
The new tables are currently only used for consistency checks with the installed kernel headers and the architecture-independent system call names table. They are based on Linux 5.4. The goal is to use these architecture-specific tables to ensure that system call wrappers are available irrespective of the version of the installed kernel headers. The tables are formatted in the form of C header files so that they can be used directly in an #include directive, without external preprocessing. (External preprocessing of a plain table file would introduce cross-subdirectory dependency issues.) However, the intent is that they can still be treated as tables and can be processed by simple tools. The irregular system call names on 32-bit arm add a complication. The <fixup-asm-unistd.h> header is introduced to work around that, and the system calls are listed under regular names in the <arch-syscall.h> file. A make target, update-syscalls-list, is added to patch the glibc sources with data from the current kernel headers. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2019-12-27Do not redirect calls to __GI_* symbols, when redirecting to *ieee128Tulio Magno Quites Machado Filho
On platforms where long double has IEEE binary128 format as a third option (initially, only powerpc64le), many exported functions are redirected to their __*ieee128 equivalents. This redirection is provided by installed headers such as stdio-ldbl.h, and is supposed to work correctly with user code. However, during the build of glibc, similar redirections are employed, in internal headers, such as include/stdio.h, in order to avoid extra PLT entries. These redirections conflict with the redirections to __*ieee128, and must be avoided during the build. This patch protects the second redirections with a test for __LONG_DOUBLE_USES_FLOAT128, a new macro that is defined to 1 when functions that deal with long double typed values reuses the _Float128 implementation (this is currently only true for powerpc64le). Tested for powerpc64le, x86_64, and with build-many-glibcs.py. Co-authored-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com> Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-12-19nptl: Move waitpid implementation to libcAdhemerval Zanella
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
2019-12-19nptl: Move wait implementation to libcAdhemerval Zanella
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
2019-12-09nptl: Add more missing placeholder abi symbol from nanosleep moveAdhemerval Zanella
This patch adds the missing __libpthread_version_placeholder for GLIBC_2.2.6 version from the nanosleep implementation move from libpthread to libc (79a547b162). It also fixes the wrong compat symbol definitions added by changing back the version used on vfork check and remove the __libpthread_version_placeholder added on some ABI (4f4bb489e0dd). The __libpthread_version_placeholder is also refactored to make it simpler to add new compat_symbols by adding a new macro compat_symbol_unique which uses the compiler extension __COUNTER__ to generate unique strong alias to be used with compat_symbol. Checked with a updated-abi on the all affected abis of the nanosleep move. Change-Id: I347a4dbdc931bb42b359456932dd1e17aa4d4078
2019-11-06nptl: Move nanosleep implementation to libcAdhemerval Zanella
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked the libpthread.so .gnu.version_d entries for every ABI affected and all of them contains the required versions (including for architectures which exports __nanosleep with a different version). Reviewed-by: Florian Weimer <fweimer@redhat.com>
2019-11-01nptl: Add pthread_clockjoin_npMike Crowe
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that accepts a clockid_t parameter to indicate which clock the timeout should be measured against. This mirrors the recently-added POSIX-proposed "clock" wait functions. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-10-07nptl: Move pthread_attr_setschedparam implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-10-07nptl: Move pthread_attr_getschedparam implementation into libcFlorian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-10-04nptl: Move pthread_attr_setinheritsched implementation into libc.Florian Weimer
This is part of the libpthread removal project: <https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-04Finish move of clock_* functions to libc. [BZ #24959]Zack Weinberg
In glibc 2.17, the functions clock_getcpuclockid, clock_getres, clock_gettime, clock_nanosleep, and clock_settime were moved from librt.so to libc.so, leaving compatibility stubs behind. Now that the dynamic linker no longer insists on finding versioned symbols in the same library that originally defined them, we do not need the stubs anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases for most of the functions anymore either. (clock_gettime still needs one.) For ports added before 2.17, libc.so needs to provide two symbol versions for each, the default at GLIBC_2.17 plus a compat version matching what librt had. While I'm at it, move the clock_*.c files and their tests from rt/ to time/.
2019-08-30nptl: Move pthread_attr_getinheritsched implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-28nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-23Refactor sigcontextinfo.hAdhemerval Zanella
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
2019-08-16nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-15nptl: Move pthread_attr_init implementation into libcFlorian Weimer
Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.