| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This patch is the abifiles for powerpc64le based on GLIBC 2.17.
|
|
The IFUNC selector for gettimeofday runs before _libc_vdso_platform_setup where
__vdso_gettimeofday is set. The selector then sets __gettimeofday (the internal
version used within GLIBC) to use the system call version instead of the vDSO one.
This patch changes the check if vDSO is available to get its value directly
instead of rely on __vdso_gettimeofday.
This patch changes it by getting the vDSO value directly.
It fixes BZ#16431.
|
|
This patches fixes BZ#16430 by setting a different symbol for internal
GLIBC calls that points to ifunc resolvers. For PPC32, if the symbol
is defined as hidden (which is the case for gettimeofday and time) the
compiler will create local branches (symbol@local) and linker will not
create PLT calls (required for IFUNC). This will leads to internal symbol
calling the IFUNC resolver instead of the resolved symbol.
For PPC64 this behavior does not occur because a call to a function in
another translation unit might use a different toc pointer thus requiring
a PLT call.
|
|
All the other ptrace structures in this file have a __ prefix except this
new one. This in turn causes build problems for most packages that try to
use ptrace such as strace:
gcc -DHAVE_CONFIG_H -I. -I../.. -I../../linux/x86_64 -I../../linux \
-I./linux -Wall -Wwrite-strings -g -O2 -MT process.o -MD -MP \
-MF .deps/process.Tpo -c -o process.o ../../process.c
In file included from ../../process.c:63:0:
/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
struct ptrace_peeksiginfo_args {
^
In file included from ../../defs.h:159:0,
from ../../process.c:37:
/usr/include/sys/ptrace.h:191:8: note: originally defined here
struct ptrace_peeksiginfo_args
^
Since this struct was introduced in glibc-2.18, there shouldn't be any
real regressions with adding the __ prefix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
My recent changes that added libm_hidden_proto / libm_hidden_def for
fegetround had the side effect of removing the need for a
localplt.data entry for fegetround for powerpc-nofpu. This patch
removes that entry. Tested powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/nptl/localplt.data:
Don't expect fegetround reference in libm.so.
|
|
This patch adds Implies files on multiarch folder for POWER chips so
multirach is enabled when building with --with-cpu and powerN
option.
|
|
This patch adds Implies files on multiarch folder for POWER chips so
multirach is enabled when building with --with-cpu and powerN
option.
|
|
This patch adds Implies files on multiarch folder for POWER chips so
multirach is enabled when building with --with-cpu and powerN option.
|
|
This patch makes the fpu/multiarch folder appears in front of the
powerpc/fpu folder.
|
|
This patch add a empty Makefile, the C IFUNC helper macros, and a empty
available IFUNC implementation enumeration.
|
|
This patch add static probes for setjmp/longjmp in the way gdb expects,fixing
the gdb.base/longjmp.exp gdb testcases.
It changes the symbol_name and use macros to to avoid change the probe names
and ending up adding more logic on GDB (since with the expected name
GDB work seamlessly).
|
|
To avoid having a ELFv2 binary accidentally picking up an old ABI ld.so,
this patch bumps the soname to ld64.so.2.
In theory (or for testing purposes) this will also allow co-installing
ld.so versions for both ABIs on the same system. Note that the kernel
will already be able to load executables of both ABIs. However, there
is currently no plan to use that theoretical possibility in a any
supported distribution environment ...
Note that in order to check which ABI to use, we need to invoke the
compiler to check the _CALL_ELF macro; this is done in a new configure
check in sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac,
replacing the hard-coded value of default-abi in the Makefile.
|
|
This updates glibc for the changes in the ELFv2 relating to the
stack frame layout. These are described in more detail here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01149.html
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01146.html
Specifically, the "compiler and linker doublewords" were removed,
which has the effect that the save slot for the TOC register is
now at offset 24 rather than 40 to the stack pointer.
In addition, a function may now no longer necessarily assume that
its caller has set up a 64-byte register save area its use.
To address the first change, the patch goes through all assembler
files and replaces immediate offsets in instructions accessing the
ABI-defined stack slots by symbolic offsets. Those already were
defined in ucontext_i.sym and used in some of the context routines,
but that doesn't really seem like the right place for those defines.
The patch instead defines those symbolic offsets in sysdeps.h,
in two variants for the old and new ABI, and uses them systematically
in all assembler files, not just the context routines.
The second change only affected a few assembler files that used
the save area to temporarily store some registers. In those
cases where this happens within a leaf function, this patch
changes the code to store those registers to the "red zone"
below the stack pointer. Otherwise, the functions already allocate
a stack frame, and the patch changes them to add extra space in
these frames as temporary space for the ELFv2 ABI.
|
|
This patch adds support for the ELFv2 ABI feature to remove function
descriptors. See this GCC patch for in-depth discussion:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01141.html
This mostly involves two types of changes: updating assembler source
files to the new logic, and updating the dynamic loader.
After the refactoring in the previous patch, most of the assembler source
changes can be handled simply by providing ELFv2 versions of the
macros in sysdep.h. One somewhat non-obvious change is in __GI__setjmp:
this used to "fall through" to the immediately following __setjmp ENTRY
point. This is no longer safe in the ELFv2 since ENTRY defines both
a global and a local entry point, and you cannot simply fall through
to a global entry point as it requires r12 to be set up.
Also, makecontext needs to be updated to set up registers according to
the new ABI for calling into the context's start routine.
The dynamic linker changes mostly consist of removing special code
to handle function descriptors. We also need to support the new PLT
and glink format used by the the ELFv2 linker, see:
https://sourceware.org/ml/binutils/2013-10/msg00376.html
In addition, the dynamic linker now verifies that the dynamic libraries
it loads match its own ABI.
The hack in VDSO_IFUNC_RET to "synthesize" a function descriptor
for vDSO routines is also no longer necessary for ELFv2.
|
|
This is the first patch to support the new ELFv2 ABI in glibc.
As preparation, this patch simply refactors some of the powerpc64 assembler
code to move all code related to creating function descriptors (.opd section)
or using function descriptors (function pointer call) into a central place
in sysdep.h.
Note that most locations creating .opd entries were already using macros
in sysdep.h, this patch simply extends this to the remaining places.
No relevant change in generated code expected.
|
|
The context established by "makecontext" has a link register pointing
back to an error path within the makecontext routine. This is currently
covered by the CFI FDE for makecontext itself, which is simply wrong
for the stack frame *inside* the context. When trying to unwind (e.g.
doing a backtrace) in a routine inside a context created by makecontext,
this can lead to uninitialized stack slots being accessed, causing the
unwinder to crash in the worst case.
Similarly, during parts of the "setcontext" routine, when the stack
pointer has already been switched to point to the new context, the
address range is still covered by the CFI FDE for setcontext. When
trying to unwind in that situation (e.g. backtrace from an async
signal handler for profiling), it is again possible that the unwinder
crashes.
Theses are all problems in existing code, but the changes in stack
frame layout appear to make the "worst case" much more likely in
the ELFv2 ABI context. This causes regressions e.g. in the libgo
testsuite on ELFv2.
This patch fixes this by ending the makecontext/setcontext FDEs
before those problematic parts of the assembler, similar to what
is already done on other platforms. This fixes the libgo
regression on ELFv2.
|
|
FLT_ROUNDS.
|
|
This patch fix the missing symbol __fe_nomask_env from commit
41e8926aa4b7f17bc95984737ee82a254ad0911c for GLIBC_2.1.
|
|
|
|
Change SHLIB_COMPAT calls to GLIBC_2_19 for __fe_nomask_env symbol.
|
|
This patch does not export __fe_mask_env anymore, only providing a
compatibility symbol. It fixes BZ#14143.
|
|
This patch fixes the vDSO symbol used directed in IFUNC resolver where
they do not have an associated ODP entry leading to undefined behavior
in some cases. It adds an artificial OPD static entry to such cases
and set its TOC to non 0 to avoid triggering lazy resolutions.
|
|
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
|
|
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00093.html
This copies the sparc version of sigstack.h, which gives powerpc
#define MINSIGSTKSZ 4096
#define SIGSTKSZ 16384
Before the VSX changes, struct rt_sigframe size was 1920 plus 128 for
__SIGNAL_FRAMESIZE giving ppc64 exactly the default MINSIGSTKSZ of
2048.
After VSX, ucontext increased by 256 bytes. Oops, we're over
MINSIGSTKSZ, so powerpc has been using the wrong value for quite a
while. Add another ucontext for TM and rt_sigframe is now at 3872,
giving actual MINSIGSTKSZ of 4000.
The glibc testcase that I was looking at was tst-cancel21, which
allocates 2*SIGSTKSZ (not because the test is trying to be
conservative, but because the test actually has nested signal stack
frames). We blew the allocation by 48 bytes when using current
mainline gcc to compile glibc (le ppc64).
The required stack depth in _dl_lookup_symbol_x from the top of the
next signal frame was 10944 bytes. I guess you'd want to add 288 to
that, implying an actual SIGSTKSZ of 11232.
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h: New file.
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00092.html
Use conditional form of branch and link to avoid destroying the cpu
link stack used to predict blr return addresses.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/makecontext.S: Use
conditional form of branch and link when obtaining pc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/makecontext.S: Likewise.
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00091.html
More LE support, correcting word accesses to _dl_hwcap.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S: Use
HIWORD/LOWORD.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Ditto.
|
|
|
|
|
|
This patch fixes backtrace for PPC32 and PPC64 to correctly handle
signal trampolines. The 'debug/tst-backtrace6.c' also check for
SA_SIGINFO handling, where is triggers another vDSO symbols for PPC32.
|
|
This patch fixes dlfcn/tststatic5 for PowerPC where pagesize
variable was not properly initialized in certain cases. This patch
is based on other architecture code.
|
|
|
|
|
|
This patch introduces two new convenience functions to set the default
thread attributes used for creating threads. This allows a programmer
to set the default thread attributes just once in a process and then
run pthread_create without additional attributes.
|
|
|
|
|
|
|
|
PowerPC kernel now provides a vDSO implementation for time syscall
(commit fcb41a2030abe0eb716ef0798035ef9562097f42). This patch changes
time syscall wrapper to use the vDSO when available. It also changes
the default non vDSO time on PowerPC to use sysdeps/posix/time.c
(since gettimeofday is a vDSO call).
|
|
It is based on draft TS 18661 and currently enabled as a GNU extension.
|
|
|
|
This patch removes redudant definition from PowerPC specific
math_ldbl, using the definitions from ieee754 math_ldbl.h.
|
|
|
|
|
|
* sysdeps/unix/sysv/linux/s390/bits/mman.h: Include
<bits/mman-linux.h>.
(MCL_CURRENT, MCL_FUTURE): Do not define here, the generic value
is fine.
* sysdeps/unix/sysv/linux/sh/bits/mman.h: Move include of
<bits/mman-linux.h> to end of file.
(MCL_CURRENT, MCL_FUTURE): Do not define here, the generic value
is fine.
* sysdeps/unix/sysv/linux/x86/bits/mman.h: Move include of
<bits/mman-linux.h> to end of file.
(MCL_CURRENT, MCL_FUTURE): Do not define here, the generic value
is fine.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h: Move include of
<bits/mman-linux.h> to end of file.
* sysdeps/unix/sysv/linux/bits/mman-linux.h [!MCL_CURRENT]
(MCL_CURRENT, MCL_FUTURE): Define here.
|
|
* sysdeps/unix/sysv/linux/bits/mman-linux.h: New file, with
Linux common definitions.
* sysdeps/unix/sysv/linux/sh/bits/mman.h: Remove all defines
provided by bits/mman-linux.h and include <bits/mman-linux.h>.
* sysdeps/unix/sysv/linux/x86/bits/mman.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/mman.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h: Likewise.
* sysdeps/unix/sysv/linux/sh/bits/mman.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h: Likewise.
|
|
|
