| Age | Commit message (Collapse) | Author |
|---|
|
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
|
|
preconfigure fragments.
This patch makes non-ex-ports architectures set base_machine and
machine based on the original configured machine value in preconfigure
fragments, like ex-ports architectures, rather than in the toplevel
configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by the patch.
* configure.ac (base_machine): Do not set specially for particular
machines here.
* configure: Regenerated.
* sysdeps/powerpc/preconfigure: Move machine and base_machine
settings from configure.ac.
* sysdeps/i386/preconfigure: New file.
* sysdeps/s390/preconfigure: Likewise.
* sysdeps/sh/preconfigure: Likewise.
* sysdeps/sparc/preconfigure: Likewise.
|
|
|
|
|
|
|
|
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
This patch relies on the C version of the rwlocks posted earlier.
With C rwlocks it is very straight forward to do adaptive elision
using TSX. It is based on the infrastructure added earlier
for mutexes, but uses its own elision macros. The macros
are fairly general purpose and could be used for other
elision purposes too.
This version is much cleaner than the earlier assembler based
version, and in particular implements adaptation which makes
it safer.
I changed the behavior slightly to not require any changes
in the test suite and fully conform to all expected
behaviors (generally at the cost of not eliding in
various situations). In particular this means the timedlock
variants are not elided. Nested trylock aborts.
|
|
|
|
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Add missing
membar to avoid block loads/stores to overlap previous stores.
|
|
[BZ #16885]
* sysdeps/sparc/sparc64/strcmp.S: Fix end comparison handling when
multiple zero bytes exist at the end of a string.
Reported by Aurelien Jarno <aurelien@aurel32.net>
* string/test-strcmp.c (check): Add explicit test for situations where
there are multiple zero bytes after the first.
|
|
* sysdeps/sparc/fpu/fenv_private.h (HAVE_RM_CTX): Define.
(libc_feholdexcept_setround_sparc_ctx): New function.
(libc_fesetenv_sparc_ctx): Likewise.
(libc_feupdateenv_sparc_ctx): Likewise.
(libc_feholdsetround_sparc_ctx): Likewise.
(libc_feholdexcept_setround_ctx): Define.
(libc_feholdexcept_setroundf_ctx): Likewise.
(libc_feholdexcept_setroundl_ctx): Likewise.
(libc_fesetenv_ctx): Likewise.
(libc_fesetenvf_ctx): Likewise.
(libc_fesetenvl_ctx): Likewise.
(libc_feupdateenv_ctx): Likewise.
(libc_feupdateenvf_ctx): Likewise.
(libc_feupdateenvl_ctx): Likewise.
(libc_feresetround_ctx): Likewise.
(libc_feresetroundf_ctx): Likewise.
(libc_feresetroundl_ctx): Likewise.
(libc_feholdsetround_ctx): Likewise.
(libc_feholdsetroundf_ctx): Likewise.
(libc_feholdsetroundl_ctx): Likewise.
|
|
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Define to
0.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
|
|
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
|
|
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
|
|
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update for some 64-bit differences from
32-bit.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Regenerate.
|
|
|
|
|
|
[BZ #16150]
* sysdeps/sparc/sparc64/multiarch/add_n.S: Resolve to the correct generic
symbol in the non-vis3 case in static builds.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Likewise.
|
|
We cannot use fnegd in this code, as fnegd was added in v9.
Only fnegs exists in v8 and earlier.
[BZ #15985]
* sysdeps/sparc/sparc32/fpu/s_fdim.S (__fdim): Do not use fnegd
on pre-v9 cpus, use a fnegs+fmovs sequence instead.
|
|
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
|
|
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
|
|
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update ULPs to handle minor
difference between 32-bit and 64-bit.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Regenerate from scratch.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
|
|
|
|
|
|
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
|
|
|
|
|
|
[BZ #15442] This adds support for the inverse interpretation of the
quiet bit of IEEE 754 floating-point NaN data that some processors
use. This includes in particular MIPS architecture processors; the
payload used for the canonical qNaN encoding is updated accordingly
so as not to interfere with the quiet bit.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
|
|
|
|
|
|
|
* sysdeps/sparc/fpu/libm-test-ulps: Update.
|
