aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/pthread
AgeCommit message (Collapse)Author
2020-09-07C11 threads: Fix inaccuracies in testsuiteCorinna Vinschen
- tst-mtx-recursive.c: mtx_init fails to use mtx_plain. Per C11 specs, using mtx_recursive alone is not supported. This isn't catched because mtx_plain is defined as 0. - tst-thrd-sleep.c: thrd_sleep returns 0 on success, a negative value on failure. Testing against thrd_success is incorrect. - tst-tss-basic.c: tss_set is incorrectly checkd for a non-0 value. The test should test aginst C11 threads error codes. This isn't catched because thrd_success is defined as 0. Note that all three tests fail on FreeBSD, which defines all mutex type values, as well as all C11 threads error codes with non-0 values.
2020-08-06htl: Enable tst-cancelx?[45]Samuel Thibault
* nptl/{tst-cancel4-common.c, tst-cancel4-common.h, tst-cancel4.c, tst-cancel5.c, tst-cancelx4.c, tst-cancelx5.c}: Move to sysdeps/pthread/ * nptl/Makefile: Move corresponding rules to... * sysdeps/pthread/Makefile: ... here.
2020-06-29htl: Enable cancel*16 an cancel*20 testsSamuel Thibault
* nptl/tst-cancel16.c, tst-cancel20.c, tst-cancelx16.c, tst-cancelx20.c: Move to... * sysdeps/pthread: ... here. * nptl/Makefile: Move corresponding references and rules to... * sysdeps/pthread/Makefile: ... here. * sysdeps/mach/hurd/i386/Makefile: Xfail tst-cancel*16 for now: missing barrier pshared support, but test should be working otherwise.
2020-06-24htl: Make sem_*wait cancellations pointsSamuel Thibault
By aligning its implementation on pthread_cond_wait. * sysdeps/htl/sem-timedwait.c (cancel_ctx): New structure. (cancel_hook): New function. (__sem_timedwait_internal): Check for cancellation and register cancellation hook that wakes the thread up, and check again for cancellation on exit. * nptl/tst-cancel13.c, nptl/tst-cancelx13.c: Move to... * sysdeps/pthread/: ... here. * nptl/Makefile: Move corresponding references and rules to... * sysdeps/pthread/Makefile: ... here.
2020-06-24htl: Enable tst-cancel25 testSamuel Thibault
* nptl/tst-cancel25.c: Move to... * sysdeps/pthread/tst-cancel25.c: ... here. (tf2) Do not test for SIGCANCEL when it is not defined. * nptl/Makefile: Move corresponding reference to... * sysdeps/pthread/Makefile: ... here.
2020-06-14htl: Enable more cancellation testsSamuel Thibault
* nptl/tst-cancel-self-cancelstate.c, tst-cancel-self.c, tst-cancel9.c, tst-cancelx9.c: Move to... * sysdeps/pthread: ... here. * nptl/Makefile: Move corresponding references and rules to... * sysdeps/pthread/Makefile: ... here.
2020-06-10htl: Enable more cancel testsSamuel Thibault
* nptl/tst-cancel11.c, tst-cancel21-static.c, tst-cancel21.c, tst-cancel6.c, tst-cancelx11.c, tst-cancelx21.c, tst-cancelx6.c: Move to... * sysdeps/pthread: ... here. * nptl/Makefile: Move corresponding references and rules to... * sysdeps/pthread/Makefile: ... here.
2020-06-08pthread: Move back linking rules to nptl and htlSamuel Thibault
d6d74ec16 ('htl: Enable more tests') moved the linking rules from nptl/Makefile and htl/Makefile to the shared sysdeps/pthread/Makefile. But e.g. on powerpc some tests are added in sysdeps/powerpc/Makefile, which is included *after* sysdeps/pthread/Makefile, and thus the tests don't get affected by the rules and fail to link. For now let's just copy over the set of rules in both nptl/Makefile and htl/Makefile. * sysdeps/pthread/Makefile: Move libpthread linking rules to... * htl/Makefile: ... here and... * nptl/Makefile: ... there.
2020-06-07htl: Enable more testsSamuel Thibault
* nptl/tst-_res1.c, tst-_res1mod1.c, tst-_res1mod2.c, tst-atfork2.c, tst-atfork2mod.c, tst-fini1.c, tst-fini1mod.c, tst-tls4.c, tst-tls4moda.c, tst-tls4modb.c: Move to... * sysdeps/pthread: ... here. Rename tst-tls4.c to tst-pt-tls4.c to avoid conflicting with elf/tst-tls4.c. * nptl/Makefile: Move corresponding references and rules to... * sysdeps/pthread/Makefile: ... here.
2020-06-07htl: Enable but XFAIL tst-flock2, tst-signal1, tst-signal2Samuel Thibault
They need setpshared support. * nptl/tst-flock2.c, tst-signal1.c, tst-signal2.c: Move to... * sysdeps/pthread: ... here. * nptl/Makefile: Move corresponding tests references to... * sysdeps/pthread/Makefile: ... here. * sysdeps/mach/hurd/i386/Makefile (test-xfail-tst-flock2, test-xfail-tst-signal1, test-xfail-tst-signal2): Add.
2020-06-07htl: Enable more testsSamuel Thibault
* htl/Makefile: Remove rules adding libpthread.so and libpthread.a to link lines. * nptl/Makefile: Move rules adding libpthread.so and libpthread.a to link lines to... * sysdeps/pthread/Makefile: ... here. * nptl/eintr.c, tst-align.c tst-align3.c tst-atfork1.c tst-backtrace1.c tst-bad-schedattr.c tst-cancel-self-canceltype.c tst-cancel-self-cleanup.c tst-cancel-self-testcancel.c tst-cancel1.c tst-cancel10.c tst-cancel12.c tst-cancel14.c tst-cancel15.c tst-cancel18.c tst-cancel19.c tst-cancel2.c tst-cancel22.c tst-cancel23.c tst-cancel26.c tst-cancel27.c tst-cancel28.c tst-cancel3.c tst-cancel8.c tst-cancelx1.c tst-cancelx10.c tst-cancelx12.c tst-cancelx14.c tst-cancelx15.c tst-cancelx18.c tst-cancelx2.c tst-cancelx3.c tst-cancelx8.c tst-cleanup0.c tst-cleanup0.expect tst-cleanup1.c tst-cleanup2.c tst-cleanup3.c tst-cleanupx0.c tst-cleanupx0.expect tst-cleanupx1.c tst-cleanupx2.c tst-cleanupx3.c tst-clock1.c tst-create-detached.c tst-detach1.c tst-eintr2.c tst-eintr3.c tst-eintr4.c tst-eintr5.c tst-exec1.c tst-exec2.c tst-exec3.c tst-exit1.c tst-exit2.c tst-exit3.c tst-flock1.c tst-fork1.c tst-fork2.c tst-fork3.c tst-fork4.c tst-getpid3.c tst-kill1.c tst-kill2.c tst-kill3.c tst-kill4.c tst-kill5.c tst-kill6.c tst-locale1.c tst-locale2.c tst-memstream.c tst-popen1.c tst-raise1.c tst-sem5.c tst-setuid3.c tst-signal4.c tst-signal5.c tst-signal6.c tst-signal8.c tst-stack1.c tst-stdio1.c tst-stdio2.c tst-sysconf.c tst-tls1.c tst-tls2.c tst-tsd1.c tst-tsd2.c tst-tsd5.c tst-tsd6.c tst-umask1.c tst-unload.c tst-unwind-thread.c tst-vfork1.c tst-vfork1x.c tst-vfork2.c tst-vfork2x.c: Move tests to... * sysdeps/pthread: ... here. Rename tst-popen1.c -> tst-pt-popen1.c tst-align.c -> tst-pt-align.c tst-align3.c -> tst-pt-align3.c tst-sysconf.c -> tst-pt-sysconf.c tst-tls1.c -> tst-pt-tls1.c tst-tls2.c -> tst-pt-tls2.c tst-vfork1.c -> tst-pt-vfork1.c tst-vfork2.c -> tst-pt-vfork2.c to avoid conflicting with libio/tst-popen1.c, elf/tst-align.c, posix/tst-sysconf.c, elf/tst-tls1.c, elf/tst-tls2.c, posix/tst-vfork1.c, posix/tst-vfork2.c. * nptl/Makefile: Move corresponding tests references and special rules to... * sysdeps/pthread/Makefile: ... here. * sysdeps/pthread/tst-stack1.c (do_test): Do not clamp stack size to PTHREAD_STACK_MIN if not defined. Tested on linux-x86_64 and hurd-i386
2020-06-07htl: Add sem_clockwait supportSamuel Thibault
* sysdeps/htl/sem-timedwait.c (__sem_timedwait_internal): Add clock_id parameter instead of hardcoding CLOCK_REALTIME. (__sem_clockwait): New function. (sem_clockwait): New weak alias. * sysdeps/htl/sem-wait.c (__sem_timedwait_internal): Update declaration. (__sem_wait): Update call to __sem_timedwait_internal. * htl/Versions (GLIBC_2.32): Add sem_clockwait. * sysdeps/mach/hurd/i386/libpthread.abilist (sem_clockwait): Add symbol. * nptl/Makefile (tests): Move tst-sem5 to... * sysdeps/pthread/Makefile (tests): ... here.
2020-06-01htl: Make pthread_cond_destroy wait for threads to be wokenSamuel Thibault
This allows to reuse the storage after calling pthread_cond_destroy. * sysdeps/htl/bits/types/struct___pthread_cond.h (__pthread_cond): Replace unused struct __pthread_condimpl *__impl field with unsigned int __wrefs. (__PTHREAD_COND_INITIALIZER): Update accordingly. * sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal): Register as waiter in __wrefs field. On unregistering, wake any pending pthread_cond_destroy. * sysdeps/htl/pt-cond-destroy.c (__pthread_cond_destroy): Register wake request in __wrefs. * nptl/Makefile (tests): Move tst-cond20 tst-cond21 to... * sysdeps/pthread/Makefile (tests): ... here. * nptl/tst-cond20.c nptl/tst-cond21.c: Move to... * sysdeps/pthread/tst-cond20.c sysdeps/pthread/tst-cond21.c: ... here.
2020-06-01htl: Enable more cond testsSamuel Thibault
* nptl/Makefile (tests): Move tst-cond11 and tst-cond27 to... * sysdeps/pthread/Makefile (tests): ... here.
2020-06-01tst-cond11: Fix build with _SC_MONOTONIC_CLOCK > 0Samuel Thibault
* sysdeps/pthread/tst-cond11.c (do_test): Fix misplaced brace.
2020-05-26htl: Add clock variantsSamuel Thibault
* htl/pt-join.c (__pthread_join): Move implementation to... (__pthread_join_common): ... new function. Add try, timed and clock support. (__pthread_join): Reimplement on top of __pthread_join_common. (__pthread_tryjoin_np, __pthread_timedjoin_np, __pthread_clockjoin_np): Implement on top of __pthread_join_common. (pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np): New aliases. * hurd/hurdlock.c (__lll_abstimed_wait, __lll_abstimed_xwait, __lll_abstimed_lock): Check for supported clock. * sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal): Add clockid parameter and support it. (__pthread_cond_timedwait): Pass -1 as clockid. (__pthread_cond_clockwait): New function. (pthread_cond_clockwait): New alias. * sysdeps/htl/pt-cond-wait.c (__pthread_cond_timedwait_internal): Update prototype. (__pthread_cond_wait): Pass -1 as clockid. * sysdeps/htl/pt-rwlock-timedrdlock.c (__pthread_rwlock_timedrdlock_internal): Add clockid parameter, and support id. (__pthread_rwlock_clockrdlock): New function. (pthread_rwlock_clockrdlock): New alias. * sysdeps/htl/pt-rwlock-rdlock.c (__pthread_rwlock_timedrdlock_internal): Update prototype. (__pthread_rwlock_rdlock): Pass -1 as clockid. * sysdeps/htl/pt-rwlock-timedwrlock.c (__pthread_rwlock_timedwrlock_internal): Add clockid parameter, and support id. (__pthread_rwlock_clockwrlock): New function. (pthread_rwlock_clockwrlock): New alias. * sysdeps/htl/pt-rwlock-wrlock.c (__pthread_rwlock_timedwrlock_internal): Update prototype. (__pthread_rwlock_wrlock): Pass -1 as clockid. * sysdeps/mach/hurd/htl/pt-mutex-timedlock.c (__pthread_mutex_timedlock): Move implementation to (__pthread_mutex_clocklock): New function with additional clockid parameter and support it. (pthread_mutex_clocklock): New alias. (__pthread_mutex_timedlock): Reimplement on top of __pthread_mutex_clocklock. * sysdeps/htl/pthread.h (pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np, pthread_mutex_clocklock, pthread_cond_clockwait, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock): New prototypes. * sysdeps/htl/pthreadP.h (__pthread_cond_clockwait): New prototype. * htl/Versions (GLIBC_2.32): Add pthread_cond_clockwait, pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock, pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np. * sysdeps/mach/hurd/i386/libpthread.abilist (pthread_clockjoin_np, pthread_cond_clockwait, pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock, pthread_timedjoin_np, pthread_tryjoin_np): New functions. * nptl/tst-abstime.c, nptl/tst-join10.c, nptl/tst-join11.c, nptl/tst-join12.c, nptl/tst-join13.c, nptl/tst-join14.c, nptl/tst-join2.c, nptl/tst-join3.c, nptl/tst-join8.c, nptl/tst-join9.c, nptl/tst-mutex-errorcheck.c, nptl/tst-pthread-mutexattr.c, nptl/tst-mutex11.c, nptl/tst-mutex5.c, nptl/tst-mutex7.c, nptl/tst-mutex7robus.c, nptl/tst-mutex9.c, nptl/tst-rwlock12.c, nptl/tst-rwlock14.c: Move to sysdeps/pthread. * sysdeps/pthread/tst-mutex8.c: Move back to nptl. * nptl/Makefile (tests): Move tst-mutex5, tst-mutex7, tst-mutex7robust, tst-mutex9, tst-mutex11, tst-rwlock12, tst-rwlock14, tst-join2, tst-join3, tst-join8, tst-join9 tst-join10, tst-join11, tst-join12, tst-join13, tst-join14, tst-abstime, tst-mutex-errorcheck, tst-pthread-mutexattr to ... * sysdeps/pthread/Makefile (tests): ... here.
2020-02-16pthread: Fix building tst-robust8 with nptlSamuel Thibault
NPTL's pthreadP.h needs internal definitions
2020-02-16pthread: Move robust mutex tests from nptl to sysdeps/pthreadSamuel Thibault
tst-robust8.c prints some mutex internals for nptl debugging, this needed to be made conditioned by getting built with nptl.
2020-02-10pthread: Move some join tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-10pthread: Move most barrier tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-10pthread: Move most sem tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-10pthread: Move key tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move some rwlock tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move most once tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move most cond tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move some attr tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move most mutex tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too. XFAIL tst-mutex4, for which support is still missing in htl.
2020-02-09pthread: Move spin tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09pthread: Move basic tests from nptl to sysdeps/pthreadSamuel Thibault
So they can be checked with htl too.
2020-02-09C11 threads: Move implementation to sysdeps/pthreadSamuel Thibault
so it gets shared by nptl and htl. Also add htl versions of thrd_current and thrd_yield. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2019-10-30Change most internal uses of __gettimeofday to __clock_gettime.Zack Weinberg
Since gettimeofday will shortly be implemented in terms of clock_gettime on all platforms, internal code should use clock_gettime directly; in addition to removing a layer of indirection, this will allow us to remove the PLT-bypass gunk for gettimeofday. (We can't quite do that yet, but it'll be coming later in this patch series.) In many cases, the changed code does fewer conversions. The changed code always assumes __clock_gettime (CLOCK_REALTIME) cannot fail. Most of the call sites were assuming gettimeofday could not fail, but a few places were checking for errors. POSIX says clock_gettime can only fail if the clock constant is invalid or unsupported, and CLOCK_REALTIME is the one and only clock constant that's required to be supported. For consistency I grepped the entire source tree for any other places that checked for errors from __clock_gettime (CLOCK_REALTIME), found one, and changed it too. (For the record, POSIX also says gettimeofday can never fail.) (It would be nice if we could declare that GNU systems will always support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several places where we are using CLOCK_REALTIME where _MONOTONIC would be more appropriate, and/or trying to use _MONOTONIC and then falling back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet, and it looks like adding it would involve substantial changes to gnumach's internals and API. Oh well.) A few Hurd-specific files were changed to use __host_get_time instead of __clock_gettime, as this seemed tidier. We also assume this cannot fail. Skimming the code in gnumach leads me to believe the only way it could fail is if __mach_host_self also failed, and our Hurd-specific code consistently assumes that can't happen, so I'm going with that. With the exception of support/support_test_main.c, test cases are not modified, mainly because I didn't want to have to figure out which test cases were testing gettimeofday specifically. The definition of GETTIME in sysdeps/generic/memusage.h had a typo and was not reading tv_sec at all. I fixed this. It appears nobody has been generating malloc traces on a machine that doesn't have a superseding definition. There are a whole bunch of places where the code could be simplified by factoring out timespec subtraction and/or comparison logic, but I want to keep this patch as mechanical as possible. Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-27time: Introduce function to check correctness of nanoseconds valueLukasz Majewski
The valid_nanoseconds () static inline function has been introduced to check if nanoseconds value is in the correct range - greater or equal to zero and less than 1000000000. The explicit #include <time.h> has been added to files where it was missing. The __syscall_slong_t type for ns has been used to avoid issues on x32. Tested with: - scripts/build-many-glibcs.py - make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-07-12nptl: Add POSIX-proposed sem_clockwaitMike Crowe
Add: int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec *abstime) which behaves just like sem_timedwait, but measures abstime against the specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and sets errno == EINVAL if any other clock is specified. * nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add clockid parameters to indicate the clock which abstime should be measured against. * nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c (__new_sem_wait): Pass CLOCK_REALTIME as clockid to __new_sem_wait_slow. * nptl/sem_clockwait.c: New file to implement sem_clockwait based on sem_timedwait.c. * nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for sem_clockwait.c to match those used for sem_timedwait.c. * sysdeps/pthread/semaphore.h: Add sem_clockwait. * nptl/Versions (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-sem17.c: Add new test for passing invalid clock to sem_clockwait. * nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait tests to also test sem_clockwait. * manual/threads.texi: Document sem_clockwait. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-04-29<semaphore.h>: Add nonnull attributesYann Droneaud
Except the following functions, NPTL implementation assume sem_t argument (or other arguments) are not NULL, so they would benefit from having the nonnull attribute. - sem_close(): can cope with a NULL sem_t and return -1 with error EINVAL; - sem_destroy(): does nothing at all * sysdeps/pthread/semaphore.h (sem_init): Add __nonnull attribute. (sem_destroy, sem_open, sem_close, sem_unlink): Likewise. (sem_wait, sem_timedwait, sem_trywait, sem_post): Likewise. (sem_getvalue): Likewise.
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-04-19hurd: fix sigevent's sigev_notify_attributes field typeSamuel Thibault
* sysdeps/pthread/bits/types/sigevent_t.h: New file, based on the generic version but include <bits/pthreadtypes.h> to make struct sigevent's sigev_notify_attributes field a pthread_attr_t*.
2018-04-02hurd: Avoid some PLTs in libc and librtSamuel Thibault
* hurd/hurdauth.c (_S_msg_add_auth): Call __vm_allocate and __vm_deallocate instead of vm_allocate and vm_deallocate. * hurd/hurdmsg.c (_S_msg_set_env_variable): Call __setenv instead of setenv. * hurd/hurdprio.c (_hurd_priority_which_map): Call __geteuid instead of geteuid. * hurd/path-lookup.c (file_name_path_scan): Call __strdup instead of strdup. * hurd/siginfo.c: Include <libioP.h>. (_hurd_siginfo_handler): Call _IO_puts instead of puts. * hurd/xattr.c (_hurd_xattr_get, _hurd_xattr_set): Call __munmap instead of munmap. * io/fts.c (fts_build): Call __dirfd instead of dirfd. * mach/devstream.c: Include <libioP.h>. (dealloc_ref): Call __mach_port_deallocate instead of mach_port_deallocate. (mach_open_devstream): Call _IO_fopencookie instead of fopencookie. Call __mach_port_deallocate instead of mach_port_deallocate. * stdlib/canonicalize.c (__realpath): Call __pathconf instead of pathconf. * sysdeps/mach/hurd/ifreq.c (__ifreq): Call __munmap instead of munmap. * sysdeps/mach/hurd/ifreq.h (__if_freereq): Likewise. * sysdeps/mach/hurd/ptrace.c (ptrace): Call __kill instead of kill. * sysdeps/mach/hurd/sendfile64.c (sendfile64): Call __munmap instead of munmap. * sysdeps/mach/hurd/socketpair.c (__socketpair): Call __close instead of close. * sysdeps/posix/clock_getres.c (realtime_getres): Call __sysconf instead of sysconf. * sysdeps/pthread/timer_gettime.c (timer_gettime): Call __clock_gettime instead of clock_gettime. * sysdeps/pthread/timer_routines.c (thread_func): Likewise. * sysdeps/pthread/timer_settime.c (timer_settime): Likewise. * sysdeps/unix/bsd/gtty.c (gtty): Call __ioctl instead of ioctl. * sysdeps/unix/bsd/stty.c (stty): Likewise. * sysdeps/unix/bsd/tcflow.c (tcflow): Call __tcgetattr instead of tcgetattr. * sysdeps/unix/clock_nanosleep.c (__clock_nanosleep): Call __clock_gettime and __nanosleep instead of clock_gettime and nanosleep.
2018-04-02hurd: avoid letting signals go to thread created by timer_createSamuel Thibault
* sysdeps/pthread/timer_routines.c (__timer_thread_start): Block all signals in thread created for runing timers.
2018-02-27hurd: fix timer_routines.c buildSamuel Thibault
* sysdeps/pthread/timer_routines.c: Include <timer_routines.h> instead of <internaltypes.h>.
2018-02-27hurd: fix timer_routines.c buildSamuel Thibault
* sysdeps/pthread/timer_routines.c: [!defined DELAYTIMER_MAX] (DELAYTIMER_MAX): Define to INT_MAX.
2018-02-27Move NPTL-specific code to NPTL-specific headerSamuel Thibault
* sysdeps/pthread/timer_routines.c: Include <timer_routines.h> instead of <nptl/pthreadP.h> (thread_attr_compare): Move function to... * sysdeps/nptl/timer_routines.h: ... new header.
2018-01-30allocalim.h: use __glibc_likely instead of __builtin_expectSamuel Thibault
* sysdeps/pthread/allocalim.h (__libc_use_alloca): Use __glibc_likely instead of __builtin_expect.
2018-01-29allocalim.h: Fix codestyleSamuel Thibault
* sysdeps/pthread/allocalim.h (__libc_use_alloca): Commute operands of || to respect codestyle.
2018-01-28hurd: Fix allocalim buildSamuel Thibault
* sysdeps/pthread/allocalim.h [!defined PTHREAD_STACK_MIN]: Do not check size against PTHREAD_STACK_MIN.
2018-01-27hurd: fix warningSamuel Thibault
timer_ptr2id and timer_id2ptr are used to convert between application-visible timer_t and struct timer_node *. timer_ptr2id was made to use void * instead of timer_t in 49b650430eb5 ('Update.') for no reason. It happens that on Linux timer_t is void *, so both that change and this commit are no-ops there, but not on systems where timer_t is not void *. Using timer_ptr2id for filling sival_ptr also does not make sense since that actually is a void *. * sysdeps/pthread/posix-timer.h (timer_ptr2id): Cast to timer_t instead of void *. * sysdeps/pthread/timer_create.c (timer_create): Do not use timer_ptr2id to cast struct timer_node * to void *.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-12-24Deprecate external use of libio.h and _G_config.h.Zack Weinberg
libio.h was originally the header for a set of supported GNU extensions, but they have not been maintained as such in many years, they are now standing in the way of improvements to stdio, and we don't think there are any remaining external users. _G_config.h was never intended for public use, but predates the bits convention. Move both of these headers into the bits directory and provide stubs at top level which issue deprecation warnings. The contents of (bits/)libio.h and (bits/)_G_config.h are still exposed to external software via stdio.h; changing that requires more complex surgery than I have time to attempt right now. * libio/libio.h, libio/_G_config.h: New stub headers which issue a deprecation warning and then include <bits/libio.h>, <bits/_G_config.h> respectively. * libio/libio.h: Rename the original version of this file to libio/bits/libio.h. Error out if not included by stdio.h or the stub libio.h. * include/libio.h: Move to include/bits. Forward to libio/bits/libio.h. * sysdeps/generic/_G_config.h: Move to top-level bits/. Error out if not included by bits/libio.h or the stub _G_config.h. * sysdeps/unix/sysv/linux/_G_config.h: Move to sysdeps/unix/sysv/linux/bits. Error out if not included by bits/libio.h or the stub _G_config.h. * libio/stdio.h: Include bits/libio.h, not libio.h. * libio/Makefile: Install bits/libio.h and bits/_G_config.h as well as libio.h and _G_config.h. * csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c * libio/strfile.h, stdio-common/vfscanf.c * sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c Include stdio.h, not _G_config.h nor libio.h. * libio/iofgetpos.c: Also rename fgetpos64 out of the way. * libio/iofsetpos.c: Also rename fsetpos64 out of the way. * scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
2017-08-31aio: Remove internal_function function attributeFlorian Weimer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:50:32 +0000