aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/powerpc
AgeCommit message (Collapse)Author
2016-05-04powerpc: Fix operand prefixesGabriel F. T. Gomes
The file sysdeps/powerpc/sysdeps.h defines aliases for condition register operands. E.g.: 'cr7' means condition register 7. On the one hand, this increases readability, as it makes it easier for readers to know whether the operand is a condition register, a general purpose register or an immediate. On the other hand, this permits that condition registers be written as if they were general purpose, and vice-versa, thus reducing the readability of the code. This commit removes some of these unintentional misuses. The changes have no effect on the final code. Checked with objdump.
2016-04-29powerpc: Zero pad using memset in strncpy/stpncpyGabriel F. T. Gomes
Call __memset_power8 to pad, with zeros, the remaining bytes in the dest string on __strncpy_power8 and __stpncpy_power8. This improves performance when n is larger than the input string, giving ~30% gain for larger strings without impacting much shorter strings.
2016-04-25powerpc: Add optimized strcspn for P8Paul E. Murphy
A few minor adjustments to the P8 strspn gives us an almost equally optimized P8 strcspn.
2016-04-22powerpc: strcasestr optmization for power8Rajalakshmi Srinivasaraghavan
This patch optimizes strcasestr function for power >= 8 systems. The average improvement of this optimization is ~40% and compares 16 bytes at a time using vector instructions. This patch is tested on powerpc64 and powerpc64le.
2016-04-15powerpc: Optimization for strlen for POWER8.Carlos Eduardo Seo
This implementation takes advantage of vectorization to improve performance of the loop over the current strlen implementation for POWER7.
2016-04-07powerpc: Add optimized P8 strspnPaul E. Murphy
This utilizes vectors and bitmasks. For small needle, large haystack, the performance improvement is upto 8x. For short strings (0-4B), the cost of computing the bitmask dominates, and is a tad slower.
2016-04-01Remove powerpc64 strspn, strcspn, and strpbrk implementationAdhemerval Zanella
This patch removes the powerpc64 optimized strspn, strcspn, and strpbrk assembly implementation now that the default C one implements the same strategy. On internal glibc benchtests current implementations shows similar performance with -O2. Tested on powerpc64le (POWER8). * sysdeps/powerpc/powerpc64/strcspn.S: Remove file. * sysdeps/powerpc/powerpc64/strpbrk.S: Remove file. * sysdeps/powerpc/powerpc64/strspn.S: Remove file.
2016-03-11powerpc: Rearrange cfi_offset callsRajalakshmi Srinivasaraghavan
This patch rearranges cfi_offset() calls after the last store so as to avoid extra DW_CFA_advance opcodes in unwind information.
2016-03-09Fix ldbl-128ibm nearbyintl in non-default rounding modes (bug 19790).Joseph Myers
The ldbl-128ibm implementation of nearbyintl uses logic that only works in round-to-nearest mode. This contrasts with rintl, which works in all rounding modes. Now, arguably nearbyintl could simply be aliased to rintl, given that spurious "inexact" is generally allowed for ldbl-128ibm, even for the underlying arithmetic operations. But given that the only point of nearbyintl is to avoid "inexact", this patch follows the more conservative approach of adding conditionals to the rintl implementation to make it suitable for use to implement nearbyintl, then builds it for nearbyintl with USE_AS_NEARBYINTL defined. The test test-nearbyint-except-2 shows up issues when traps on "inexact" are enabled, which turn out to be problems with the powerpc fenv_private.h implementation (two functions that should disable exception traps potentially failing to do so in some cases); this patch duly fixes that as well (I don't see any other existing cases where this would be user-visible; there isn't much use of *_NOEX, *hold* etc. in libm that requires exceptions to be discarded and not trapped on). Tested for powerpc. [BZ #19790] * sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL] (rintl): Define as macro. [USE_AS_NEARBYINTL] (__rintl): Likewise. (__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead of fesetround. Ensure results are evaluated before end of scope. * sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define USE_AS_NEARBYINTL and include s_rintl.c. * sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc): Disable exception traps in new environment. (libc_feholdsetround_ppc_ctx): Likewise.
2016-03-08powerpc: Remove uses of operand modifier (%s) in inline asmGabriel F. T. Gomes
The operand modifier %s on powerpc is an undocumented internal implementation detail of GCC. Besides that, the GCC community wants to remove it. This patch rewrites the expressions that use this modifier with logically equivalent expressions that don't require it. Explanation for the substitution: The %s modifier takes an immediate operand and prints 32 less such immediate. Thus, in the previous code, the expression resulted in: 32 - __builtin_ffs(e) where e was guaranteed to have exactly a single bit set, by the following expressions: (e & (e-1) == 0) : e has at most one bit set. (e != 0) : e is not zero, thus it has at least one bit set. Since we guarantee that there is exactly only one bit set, the following statement is true: 32 - __builtin_ffs(e) == __builtin_clz(e) Thus, we can replace __builtin_ffs with __builtin_clz and remove the %s operand modifier.
2016-03-08powerpc: Fix dl-procinfo HWCAPCarlos Eduardo Seo
HWCAP-related code should had been updated when the 32 bits of HWCAP were used. This patch updates the code in dl-procinfo.h to loop through all the 32 bits in HWCAP and updates _dl_powerpc_cap_flags accordingly.
2016-02-04powerpc: Regenerate libm-test-ulpsRajalakshmi Srinivasaraghavan
2016-01-27Remove unused variablesAndreas Schwab
They are flagged by -Wunused-const-variable.
2016-01-19Fix ulps regeneration for *-finite tests.Joseph Myers
On running tests after from-scratch ulps regeneration, I found that some libm tests failed with ulps in excess of those recorded in the from-scratch regeneration, which should never happen unless those ulps exceed the limit on ulps that can go in libm-test-ulps files. Failure: Test: atan2_upward (inf, -inf) Result: is: 2.35619498e+00 0x1.2d97ccp+1 should be: 2.35619450e+00 0x1.2d97c8p+1 difference: 4.76837159e-07 0x1.000000p-21 ulp : 2.0000 max.ulp : 1.0000 Maximal error of `atan2_upward' is : 2 ulp accepted: 1 ulp Failure: Test: carg_upward (-inf + inf i) Result: is: 2.35619498e+00 0x1.2d97ccp+1 should be: 2.35619450e+00 0x1.2d97c8p+1 difference: 4.76837159e-07 0x1.000000p-21 ulp : 2.0000 max.ulp : 1.0000 Maximal error of `carg_upward' is : 2 ulp accepted: 1 ulp The problem comes from the addition of tests for the finite-math-only versions of libm functions. Those tests share ulps with the default function variants. make regen-ulps runs the default tests before the finite-math-only tests, concatenating the resulting ulps before feeding them to gen-libm-test.pl to generate a new libm-test-ulps file. But gen-libm-test.pl always takes the last ulps value given for any (function, type) pair. So, if the largest ulps for a function come from non-finite inputs, a from-scratch regeneration loses those ulps. This patch fixes gen-libm-test.pl, in the case where there are multiple ulps values for a (function, type) pair - which can only happen as part of a regeneration - to take the largest ulps value rather than the last one. Tested for ARM / MIPS / powerpc-nofpu. * math/gen-libm-test.pl (parse_ulps): Do not reduce already-recorded ulps. * sysdeps/arm/libm-test-ulps: Regenerated. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
2016-01-18Regenerate powerpc-nofpu libm-test-ulps.Joseph Myers
* sysdeps/powerpc/nofpu/libm-test-ulps: Regenerated.
2016-01-08powerpc: Enforce compiler barriers on hardware transactionsTulio Magno Quites Machado Filho
Work around a GCC behavior with hardware transactional memory built-ins. GCC doesn't treat the PowerPC transactional built-ins as compiler barriers, moving instructions past the transaction boundaries and altering their atomicity.
2016-01-08powerpc: Add hwcap2 bits for POWER9.Carlos Eduardo Seo
Added hwcap2 bit masks for Power ISA 3.0 and VSX IEEE binary float 128-bit features.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers
2015-12-22powerpc: Export __parse_hwcap_and_convert_at_platform to libc.a.Carlos Eduardo Seo
Commit 67385a01d229751569b6aac067ffdcd813a15d7a added a new feature for powerpc, where we store HWCAP/Platform bits in the TCB. In the dynamic linking case, we use the versioned symbol '__parse_hwcap_and_convert_at_platform' to verify if this feature is available. However, the same symbol was not exported to libc.a, making it not possible for GCC to check for it prior to link time.
2015-12-22powerpc: Add basic support for POWER9 sans hwcap.Carlos Eduardo Seo
This patch adds the minimum changes for supporting the POWER9 processor.
2015-12-22powerpc: Regenerate libm-test-ulpsAdhemerval Zanella
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
2015-12-17Fix POWER7 logb results for negative subnormals (bug 19375)Adhemerval Zanella
The optimized POWER7 logb implementation does not use the absolute value of the word extracted from the input to apply the leading 0-bits builtin (to ignore the float sign). This patch fixes it by clearing the signal bit in the resulting word. It fixes the subnormal tests failures when running on POWER7 ou newer chip. Tested on powerpc64le (POWER8). [BZ# 19375] * sysdeps/powerpc/power7/fpu/s_logb.c (__logb): Fix return for negative subnormals.
2015-12-03powerpc: Add hwcap/hwcap2/platform data to TCB.Carlos Eduardo Seo
This patch adds a new feature for powerpc. In order to get faster access to the HWCAP/HWCAP2 bits and platform number (i.e. for implementing __builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of reading from the auxiliary vector, we now reserve space for them in the TCB. This is an ABI change for GLIBC 2.23. A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to get the data from the auxiliary vector and parse it, and store it for later use in the TLS initialization code. This function is called very early (in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and in __libc_start_main () for the static linking case) to make sure the data is available at the time of TLS initialization. * sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo. (sysdep_routines): Likewise. (sysdep-rtld-routines): Likewise. [$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static [$(subdir) = nptl](tests-static): test-get_hwcap-static * sysdeps/powerpc/Versions: Added new __parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23. * sysdeps/powerpc/hwcapinfo.c: New file. (__tcb_parse_hwcap_and_convert_at_platform): New function to initialize and parse hwcap, hwcap2 and platform number information. * sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables to store HWCAP+HWCAP2 and platform number. * sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets for HWCAP+HWCAP2 and platform number in the TCB. * sysdeps/powerpc/nptl/tls.h: New functionality. Stores the HWCAP, HWCAP2 and platform number in the TCB. (dtv): Added new fields for HWCAP+HWCAP2 and platform number. (TLS_INIT_TP): Included calls to add the hwcap and at_platform values in the TCB in TP initialization. (TLS_DEFINE_INIT_TP): Likewise. (THREAD_GET_HWCAP): New macro. (THREAD_SET_HWCAP): Likewise. (THREAD_GET_AT_PLATFORM): Likewise. (THREAD_SET_AT_PLATFORM): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h: (dl_platform_init): New function that calls __parse_hwcap_and_convert_at_platform for the dymanic linking case for powerpc32. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64. * sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for this functionality, static linking case. * sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic linking case. * sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to __parse_hwcap_and_convert_at_platform for the static linking case. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Included the new __parse_hwcap_and_convert_at_platform symbol in the ABI list for GLIBC 2.23. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
2015-11-19powerpc: Spinlock optimization and cleanupPaul Murphy
This patch optimizes powerpc spinlock implementation by: * Use the correct EH hint bit on the larx for supported ISA. For lock acquisition, the thread that acquired the lock with a successful stcx does not want to give away the write ownership on the cacheline. The idea is to make the load reservation "sticky" about retaining write authority to the line. That way, the store that must inevitably come to release the lock can succeed quickly and not contend with other threads issuing lwarx. If another thread does a store to the line (false sharing), the winning thread must give up write authority to the proper value of EH for the larx for a lock acquisition is 1. * Increase contented lock performance by up to 40%, and no measurable impact on uncontended locks on P8. Thanks to Adhemerval Zanella who did most of the work. I've run some tests, and addressed some minor feedback. * sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock): Add lwarx hint, and use macro for acquire instruction. * sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ... * sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and update to use new atomic macros.
2015-11-12Fix powerpc round, roundf spurious "inexact" (bug 19238).Joseph Myers
The powerpc hard-float round and roundf functions, both 32-bit and 64-bit, raise spurious "inexact" exceptions for integer arguments from adding 0.5 and rounding to integer toward zero. Since these functions already save and restore the rounding mode, it's natural to make them restore the full floating-point state instead to fix this bug, which this patch does. The save of the state is moved after the first floating-point operation on the input so that any "invalid" exceptions from signaling NaN inputs are properly preserved. As a consequence of this approach to the fix, "inexact" for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11, see bug 15479) is also avoided for these implementations; this is *not* a general fix for bug 15479 since plenty of other implementations of various functions still raise spurious "inexact" for noninteger arguments. This issue and fix do not apply to builds using power5+ versions of round and roundf, which use the frin instruction and avoid "inexact" exceptions that way. This patch should get hard-float powerpc32 and powerpc64 (default function implementations) back to a state where test-float and test-double will pass after ulps regeneration. Tested for powerpc32 and powerpc64. [BZ #15479] [BZ #19238] * sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save floating-point state after first operation on input. Restore full state rather than just rounding mode. * sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
2015-11-12Fix powerpc64 lround, lroundf, llround, llroundf spurious "inexact" ↵Joseph Myers
exceptions (bug 19235). Similar to bug 19134 for powerpc32, the powerpc64 implementations of lround, lroundf, llround, llroundf can raise spurious "inexact" exceptions for integer arguments from adding 0.5 then converting to integer (this does not apply to the power5+ version for double, which uses the frin instruction which is defined never to raise "inexact"; I don't know why power5+ doesn't use that version for float as well). This patch fixes the bug in a similar way to the powerpc32 bug, by testing for integers (adding and subtracting 2^52 and comparing with the value before that addition and subtraction) and not adding 0.5 in that case. The powerpc maintainers may wish to look at making power5+ / power6x / power8 use frin for float lround / llround as well as for double, unless there's some reason I've missed that this isn't beneficial. Tested for powerpc64. [BZ #19235] * sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Do not add 0.5 to integer arguments. * sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf): Likewise. (.LC2): New object.
2015-11-11Fix powerpc nearbyint wrongly clearing "inexact" and leaving traps disabled ↵Joseph Myers
(bug 19228). Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc (both powerpc32 and powerpc64) hard-float implementations of nearbyintf and nearbyint wrongly clear an "inexact" exception that was raised before the function was called; this shows up as failure of the test math/test-nearbyint-except added when that bug was fixed. They also wrongly leave traps on "inexact" disabled if they were enabled before the function was called. This patch fixes the bugs similar to how the x86 bug was fixed: saving and restoring the whole floating-point state, both to restore the original "inexact" flag state and to restore the original state of whether traps on "inexact" were enabled. Because there's a convenient point in the powerpc implementations to save state after any sNaN arguments will have raised "invalid" but before "inexact" traps need to be disabled, no special handling for "invalid" is needed as in the x86 version. Tested for powerpc64 and powerpc32, where it fixes the math/test-nearbyint-except failure as well as fixing the new test math/test-nearbyint-except-2 added by this patch. Also tested for x86_64 and x86 that the new test passes. If powerpc experts see a more efficient way of doing this (e.g. instruction positioning that's better for pipelines on typical processors) then of course followups optimizing the fix are welcome. [BZ #19228] * sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save and restore full floating-point state. * sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * math/test-nearbyint-except-2.c: New file. * math/Makefile (tests): Add test-nearbyint-except-2.
2015-10-28powerpc: Provide __tls_get_addr () in static libcCarlos Eduardo Seo
Since '--no-tls-optimize' is available for Power in ld, we need to provide __tls_get_addr () in static libc in order to avoid undefined references to this symbol when that flag is used. * sysdeps/powerpc/libc-tls.c: New file. Provides __tls_get_addr () in static libc.
2015-10-27powerpc: Fix usage of elision transient failure adapt paramPaul Murphy
The skip_lock_out_of_tbegin_retries adaptive parameter was not being used correctly, nor as described. This prevents a fallback for all users of the lock if a transient abort occurs within the accepted number of retries. [BZ #19174] * sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of .skip_lock_out_of_tbegin_retries. * sysdeps/unix/sysv/linux/powerpc/elision-lock.c (__lll_lock_elision): Likewise, and respect a value of try_tbegin <= 0.
2015-10-19PowerPC: Fix a race condition when eliding a lockTulio Magno Quites Machado Filho
The previous code used to evaluate the preprocessor token is_lock_free to a variable before starting a transaction. This behavior can cause an error if another thread got the lock (without using a transaction) between the evaluation of the token and the beginning of the transaction. This bug can be triggered with the following order of events: 1. The lock accessed by is_lock_free is free. 2. Thread T1 evaluates is_lock_free and stores into register R1 that the lock is free. 3. Thread T2 acquires the same lock used in is_lock_free. 4. T1 begins the transaction, creating a memory barrier where is_lock_free is false, but R1 is true. 5. T1 reads R1 and doesn't abort the transaction. 6. T1 calls ELIDE_UNLOCK, which reads false from is_lock_free and decides to unlock a lock acquired by T2, leading to undefined behavior. This patch delays the evaluation of is_lock_free to inside a transaction by moving this part of the code to the macro ELIDE_LOCK. [BZ #18743] * sysdeps/powerpc/nptl/elide.h (__elide_lock): Move most of this code to... (ELIDE_LOCK): ...here. (__get_new_count): New function with part of the code from __elide_lock that updates the value of adapt_count after a transaction abort. (__elided_trylock): Moved this code to... (ELIDE_TRYLOCK): ...here.
2015-10-19Convert 231 sysdeps function definitions to prototype style.Joseph Myers
This mostly automatically-generated patch converts 231 sysdeps function definitions in glibc from old-style K&R to prototype-style. For __aio_sigqueue and __gai_sigqueue I had to add internal_function to the definitions as noted by Florian in <https://sourceware.org/ml/libc-alpha/2015-10/msg00595.html> to keep the functions compiling on x86 after conversion to prototype definitions. Otherwise, the patch is automatically generated with all the same exclusions and caveats as in <https://sourceware.org/ml/libc-alpha/2015-10/msg00594.html> except that it's a patch for sysdeps files. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Also tested for arm, mips64 and powerpc32 that installed stripped shared libraries are unchanged by the patch. * sysdeps/arm/backtrace.c (__backtrace): Convert to prototype-style function definition. * sysdeps/i386/backtrace.c (__backtrace): Likewise. * sysdeps/i386/ffs.c (__ffs): Likewise. * sysdeps/i386/i686/ffs.c (__ffs): Likewise. * sysdeps/ia64/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/ia64/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/m68k/ffs.c (__ffs): Likewise. * sysdeps/m68k/m680x0/fpu/e_acos.c (FUNC): Likewise. * sysdeps/m68k/m680x0/fpu/e_fmod.c (FUNC): Likewise. * sysdeps/mach/adjtime.c (__adjtime): Likewise. * sysdeps/mach/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/mach/hurd/_exit.c (_exit): Likewise. * sysdeps/mach/hurd/access.c (__access): Likewise. * sysdeps/mach/hurd/adjtime.c (__adjtime): Likewise. * sysdeps/mach/hurd/chdir.c (__chdir): Likewise. * sysdeps/mach/hurd/chmod.c (__chmod): Likewise. * sysdeps/mach/hurd/chown.c (__chown): Likewise. * sysdeps/mach/hurd/cthreads.c (cthread_keycreate): Likewise. (cthread_getspecific): Likewise. (cthread_setspecific): Likewise. (__libc_getspecific): Likewise. * sysdeps/mach/hurd/euidaccess.c (__euidaccess): Likewise. * sysdeps/mach/hurd/faccessat.c (faccessat): Likewise. * sysdeps/mach/hurd/fchdir.c (__fchdir): Likewise. * sysdeps/mach/hurd/fchmod.c (__fchmod): Likewise. * sysdeps/mach/hurd/fchmodat.c (fchmodat): Likewise. * sysdeps/mach/hurd/fchown.c (__fchown): Likewise. * sysdeps/mach/hurd/fchownat.c (fchownat): Likewise. * sysdeps/mach/hurd/flock.c (__flock): Likewise. * sysdeps/mach/hurd/fsync.c (fsync): Likewise. * sysdeps/mach/hurd/ftruncate.c (__ftruncate): Likewise. * sysdeps/mach/hurd/getgroups.c (__getgroups): Likewise. * sysdeps/mach/hurd/gethostname.c (__gethostname): Likewise. * sysdeps/mach/hurd/getitimer.c (__getitimer): Likewise. * sysdeps/mach/hurd/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/mach/hurd/getpgid.c (__getpgid): Likewise. * sysdeps/mach/hurd/getrusage.c (__getrusage): Likewise. * sysdeps/mach/hurd/getsockname.c (__getsockname): Likewise. * sysdeps/mach/hurd/group_member.c (__group_member): Likewise. * sysdeps/mach/hurd/isatty.c (__isatty): Likewise. * sysdeps/mach/hurd/lchown.c (__lchown): Likewise. * sysdeps/mach/hurd/link.c (__link): Likewise. * sysdeps/mach/hurd/linkat.c (linkat): Likewise. * sysdeps/mach/hurd/listen.c (__listen): Likewise. * sysdeps/mach/hurd/mkdir.c (__mkdir): Likewise. * sysdeps/mach/hurd/mkdirat.c (mkdirat): Likewise. * sysdeps/mach/hurd/openat.c (__openat): Likewise. * sysdeps/mach/hurd/poll.c (__poll): Likewise. * sysdeps/mach/hurd/readlink.c (__readlink): Likewise. * sysdeps/mach/hurd/readlinkat.c (readlinkat): Likewise. * sysdeps/mach/hurd/recv.c (__recv): Likewise. * sysdeps/mach/hurd/rename.c (rename): Likewise. * sysdeps/mach/hurd/renameat.c (renameat): Likewise. * sysdeps/mach/hurd/revoke.c (revoke): Likewise. * sysdeps/mach/hurd/rewinddir.c (__rewinddir): Likewise. * sysdeps/mach/hurd/rmdir.c (__rmdir): Likewise. * sysdeps/mach/hurd/seekdir.c (seekdir): Likewise. * sysdeps/mach/hurd/send.c (__send): Likewise. * sysdeps/mach/hurd/setdomain.c (setdomainname): Likewise. * sysdeps/mach/hurd/setegid.c (setegid): Likewise. * sysdeps/mach/hurd/seteuid.c (seteuid): Likewise. * sysdeps/mach/hurd/setgid.c (__setgid): Likewise. * sysdeps/mach/hurd/setgroups.c (setgroups): Likewise. * sysdeps/mach/hurd/sethostid.c (sethostid): Likewise. * sysdeps/mach/hurd/sethostname.c (sethostname): Likewise. * sysdeps/mach/hurd/setlogin.c (setlogin): Likewise. * sysdeps/mach/hurd/setpgid.c (__setpgid): Likewise. * sysdeps/mach/hurd/setregid.c (__setregid): Likewise. * sysdeps/mach/hurd/setreuid.c (__setreuid): Likewise. * sysdeps/mach/hurd/settimeofday.c (__settimeofday): Likewise. * sysdeps/mach/hurd/setuid.c (__setuid): Likewise. * sysdeps/mach/hurd/shutdown.c (shutdown): Likewise. * sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigpending.c (sigpending): Likewise. * sysdeps/mach/hurd/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/mach/hurd/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/mach/hurd/socket.c (__socket): Likewise. * sysdeps/mach/hurd/symlink.c (__symlink): Likewise. * sysdeps/mach/hurd/symlinkat.c (symlinkat): Likewise. * sysdeps/mach/hurd/telldir.c (telldir): Likewise. * sysdeps/mach/hurd/truncate.c (__truncate): Likewise. * sysdeps/mach/hurd/umask.c (__umask): Likewise. * sysdeps/mach/hurd/unlink.c (__unlink): Likewise. * sysdeps/mach/hurd/unlinkat.c (unlinkat): Likewise. * sysdeps/mips/mips64/__longjmp.c (__longjmp): Likewise. * sysdeps/posix/alarm.c (alarm): Likewise. * sysdeps/posix/cuserid.c (cuserid): Likewise. * sysdeps/posix/dirfd.c (dirfd): Likewise. * sysdeps/posix/dup.c (__dup): Likewise. * sysdeps/posix/dup2.c (__dup2): Likewise. * sysdeps/posix/euidaccess.c (euidaccess): Likewise. (main): Likewise. * sysdeps/posix/flock.c (__flock): Likewise. * sysdeps/posix/fpathconf.c (__fpathconf): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/posix/gethostname.c (__gethostname): Likewise. * sysdeps/posix/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/posix/isatty.c (__isatty): Likewise. * sysdeps/posix/killpg.c (killpg): Likewise. * sysdeps/posix/libc_fatal.c (__libc_fatal): Likewise. * sysdeps/posix/mkfifoat.c (mkfifoat): Likewise. * sysdeps/posix/raise.c (raise): Likewise. * sysdeps/posix/remove.c (remove): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/posix/rewinddir.c (__rewinddir): Likewise. * sysdeps/posix/seekdir.c (seekdir): Likewise. * sysdeps/posix/sigblock.c (__sigblock): Likewise. * sysdeps/posix/sigignore.c (sigignore): Likewise. * sysdeps/posix/sigintr.c (siginterrupt): Likewise. * sysdeps/posix/signal.c (__bsd_signal): Likewise. * sysdeps/posix/sigset.c (sigset): Likewise. * sysdeps/posix/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/posix/sysconf.c (__sysconf): Likewise. * sysdeps/posix/sysv_signal.c (__sysv_signal): Likewise. * sysdeps/posix/time.c (time): Likewise. * sysdeps/posix/ttyname.c (getttyname): Likewise. (ttyname): Likewise. * sysdeps/posix/ttyname_r.c (__ttyname_r): Likewise. * sysdeps/posix/utime.c (utime): Likewise. * sysdeps/powerpc/fpu/s_isnan.c (__isnan): Likewise. * sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/pthread/aio_error.c (aio_error): Likewise. * sysdeps/pthread/aio_read.c (aio_read): Likewise. * sysdeps/pthread/aio_read64.c (aio_read64): Likewise. * sysdeps/pthread/aio_write.c (aio_write): Likewise. * sysdeps/pthread/aio_write64.c (aio_write64): Likewise. * sysdeps/pthread/flockfile.c (__flockfile): Likewise. * sysdeps/pthread/ftrylockfile.c (__ftrylockfile): Likewise. * sysdeps/pthread/funlockfile.c (__funlockfile): Likewise. * sysdeps/pthread/timer_create.c (timer_create): Likewise. * sysdeps/pthread/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/pthread/timer_gettime.c (timer_gettime): Likewise. * sysdeps/s390/ffs.c (__ffs): Likewise. * sysdeps/s390/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/s390/nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * sysdeps/sh/nptl/pthread_spin_lock.c (pthread_spin_lock): Likewise. * sysdeps/sparc/nptl/pthread_barrier_destroy.c (pthread_barrier_destroy): Likewise. * sysdeps/sparc/nptl/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/e_sqrt.c (__ieee754_sqrt): Likewise. * sysdeps/sparc/sparc32/pthread_barrier_wait.c (__pthread_barrier_wait): Likewise. * sysdeps/sparc/sparc32/sem_init.c (__old_sem_init): Likewise. * sysdeps/tile/memcmp.c (memcmp_common_alignment): Likewise. (memcmp_not_common_alignment): Likewise. (MEMCMP): Likewise. * sysdeps/tile/wordcopy.c (_wordcopy_fwd_aligned): Likewise. (_wordcopy_fwd_dest_aligned): Likewise. (_wordcopy_bwd_aligned): Likewise. (_wordcopy_bwd_dest_aligned): Likewise. * sysdeps/unix/bsd/ftime.c (ftime): Likewise. * sysdeps/unix/bsd/gtty.c (gtty): Likewise. * sysdeps/unix/bsd/stty.c (stty): Likewise. * sysdeps/unix/bsd/tcflow.c (tcflow): Likewise. * sysdeps/unix/bsd/tcflush.c (tcflush): Likewise. * sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/bsd/tcgetpgrp.c (tcgetpgrp): Likewise. * sysdeps/unix/bsd/tcsendbrk.c (tcsendbreak): Likewise. * sysdeps/unix/bsd/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/bsd/tcsetpgrp.c (tcsetpgrp): Likewise. * sysdeps/unix/bsd/ualarm.c (ualarm): Likewise. * sysdeps/unix/bsd/wait3.c (__wait3): Likewise. * sysdeps/unix/getlogin_r.c (__getlogin_r): Likewise. * sysdeps/unix/sockatmark.c (sockatmark): Likewise. * sysdeps/unix/stime.c (stime): Likewise. * sysdeps/unix/sysv/linux/_exit.c (_exit): Likewise. * sysdeps/unix/sysv/linux/aio_sigqueue.c (__aio_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/arm/sigaction.c (__libc_sigaction): Convert to prototype-style function definition. * sysdeps/unix/sysv/linux/faccessat.c (faccessat): Likewise. * sysdeps/unix/sysv/linux/fchmodat.c (fchmodat): Likewise. * sysdeps/unix/sysv/linux/fpathconf.c (__fpathconf): Likewise. * sysdeps/unix/sysv/linux/gai_sigqueue.c (__gai_sigqueue): Likewise. Use internal_function. * sysdeps/unix/sysv/linux/gethostid.c (sethostid): Convert to prototype-style function definition * sysdeps/unix/sysv/linux/getlogin_r.c (__getlogin_r_loginuid): Likewise. (__getlogin_r): Likewise. * sysdeps/unix/sysv/linux/getpt.c (__posix_openpt): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_broadcast.c (__pthread_cond_broadcast): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_init.c (__pthread_cond_init): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_signal.c (__pthread_cond_signal): Likewise. * sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c (__pthread_cond_wait): Likewise. * sysdeps/unix/sysv/linux/i386/getmsg.c (getmsg): Likewise. * sysdeps/unix/sysv/linux/i386/setegid.c (setegid): Likewise. * sysdeps/unix/sysv/linux/ia64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/ia64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/ia64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/msgget.c (msgget): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c (__ftruncate64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c (truncate64): Likewise. * sysdeps/unix/sysv/linux/pt-raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/pthread_getcpuclockid.c (pthread_getcpuclockid): Likewise. * sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np): Likewise. * sysdeps/unix/sysv/linux/pthread_sigmask.c (pthread_sigmask): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/raise.c (raise): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/semget.c (semget): Likewise. * sysdeps/unix/sysv/linux/semop.c (semop): Likewise. * sysdeps/unix/sysv/linux/setrlimit64.c (setrlimit64): Likewise. * sysdeps/unix/sysv/linux/shmat.c (shmat): Likewise. * sysdeps/unix/sysv/linux/shmdt.c (shmdt): Likewise. * sysdeps/unix/sysv/linux/shmget.c (shmget): Likewise. * sysdeps/unix/sysv/linux/sigaction.c (__libc_sigaction): Likewise. * sysdeps/unix/sysv/linux/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Likewise. * sysdeps/unix/sysv/linux/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/unix/sysv/linux/speed.c (cfgetospeed): Likewise. (cfgetispeed): Likewise. (cfsetospeed): Likewise. (cfsetispeed): Likewise. * sysdeps/unix/sysv/linux/tcflow.c (tcflow): Likewise. * sysdeps/unix/sysv/linux/tcflush.c (tcflush): Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c (tcsetattr): Likewise. * sysdeps/unix/sysv/linux/time.c (time): Likewise. * sysdeps/unix/sysv/linux/timer_create.c (timer_create): Likewise. * sysdeps/unix/sysv/linux/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/timer_getoverr.c (timer_getoverrun): Likewise. * sysdeps/unix/sysv/linux/timer_gettime.c (timer_gettime): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigpending.c (sigpending): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigprocmask.c (__sigprocmask): Likewise. * sysdeps/x86_64/backtrace.c (__backtrace): Likewise.
2015-10-14Fix powerpc32 lround, lroundf spurious exceptions (bug 19134).Joseph Myers
The powerpc32 implementation of lround and lroundf can produce spurious exceptions from adding 0.5 then converting to integer. This includes "inexact" from the conversion to integer (not allowed for integer arguments to these functions), and, for larger integer arguments, "inexact", and "overflow" when rounding upward, from the addition. In addition, "inexact" is not allowed together with "invalid" and so inexact addition must be avoided when the integer will be out of range of 32-bit long, whether or not the argument is an integer. This patch fixes these problems. As in the powerpc64 llround implementation, a check is added for too-large arguments; in the powerpc64 case that means arguments at least 2^52 in magnitude (so that 0.5 cannot be added exactly), while in this case it means arguments for which the result would overflow "long". In those cases a suitable overflowing value is used for the integer conversion without adding 0.5, while for smaller arguments it's tested whether the argument is an integer (by adding and subtracting 2^52 to the absolute value and comparing with the original absolute value) to avoid adding 0.5 to integers and generating spurious "inexact". This code is not used when the power5+ sysdeps directories are used, as there's a separate power5+ version of these functions.. Tested for powerpc. This gets test-float (for a default powerpc32 hard-float build without any --with-cpu) back to the point where it should pass once powerpc ulps are regenerated; test-double still needs another problem with exceptions fixed to get back to that point (and I haven't looked lately at what default powerpc64 results are like). [BZ #19134] * sysdeps/powerpc/powerpc32/fpu/s_lround.S (.LC1): New object. (.LC2): Likewise. (.LC3): Likewise. (__lround): Do not add 0.5 to integer or out-of-range arguments.
2015-10-13Fix powerpc32 llround, llroundf exceptions (bug 19125).Joseph Myers
The powerpc32 implementations of llroundf and llround produce spurious and missing exceptions (some arising from such exceptions from conversions to long long, some present even when fctidz is used). This patch fixes those problems in a similar way to the llrint / llrintf fixes. The spurious exceptions in the fctidz case for large arguments arise from a converted value that saturated as LLONG_MAX being converted back to float or double (the conversion back being inexact, but "inexact" must not be raised together with "invalid"), and from the subtraction x - xrf also being inexact for sufficiently large arguments (whether the saturation was to LLONG_MAX or LLONG_MIN); those are fixed by returning early if the argument is large enough that no rounding is needed. This code is not used for --with-cpu=power4 builds (I suspect the code used in that case may also produce spurious "inexact" exceptions, but that's something to investigate later). Tested for powerpc. [BZ #19125] * sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llround): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include <math_private.h> and <stdint.h>. (__llroundf): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions.
2015-10-13Move powerpc llround implementations to powerpc32 directory.Joseph Myers
sysdeps/powerpc/fpu/ has versions of llround and llroundf that are actually used only for powerpc32 because sysdeps/powerpc/powerpc64/fpu/ has its own versions of those functions. This patch moves them into sysdeps/powerpc/powerpc32/fpu to reflect where they are actually used (in preparation for fixing other problems with those functions). Tested for powerpc that installed stripped shared libraries are unchanged by this patch. * sysdeps/powerpc/fpu/s_llround.c: Move to .... * sysdeps/powerpc/powerpc32/fpu/s_llround.c: ...here. * sysdeps/powerpc/fpu/s_llroundf.c: Move to .... * sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: ...here.
2015-10-13Fix powerpc32 llrint, llrintf bad exceptions (bug 16422).Joseph Myers
The versions of llrint and llrintf for older powerpc32 processors convert the results of __rint / __rintf to long long int, resulting in spurious exceptions from such casts in certain cases. This patch makes glibc work around the problems with the libgcc conversions when the compiler used to build glibc doesn't use the fctidz instruction for them. Tested for powerpc. [BZ #16422] * sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz): New configure test. * sysdeps/powerpc/powerpc32/fpu/configure: Regenerated. * config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro. * sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llrint): Avoid conversions to long long int where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include <math_private.h> and <stdint.h>. (__llrintf): Avoid conversions to long long int where those might raise spurious exceptions.
2015-10-05Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug ↵Joseph Myers
19050). On powerpc32 hard-float, older processors (ones where fcfid is not available for 32-bit code), GCC generates conversions from integers to floating point that wrongly convert integer 0 to -0 instead of +0 in FE_DOWNWARD mode. This in turn results in logb and a few other functions wrongly returning -0 when they should return +0. This patch works around this issue in glibc as I proposed in <https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that the affected functions can be correct and the affected tests pass in the absence of a GCC fix for this longstanding issue (GCC bug 67771 - if fixed, of course we can put in GCC version conditionals, and eventually phase out the workarounds). A new macro FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that header defines the macro based on the results of a configure test for whether such conversions use the fcfid instruction. Tested for x86_64 (that installed stripped shared libraries are unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to 0 as expected and that the relevant tests are fixed). Also tested a build with GCC configured for -mcpu=power4 and verified that HAVE_PPC_FCFID comes out to 1 in that case. There are still some other issues to fix to get test-float and test-double passing cleanly for older powerpc32 processors (apart from the need for an ulps regeneration for powerpc). (test-ldouble will be harder to get passing cleanly, but with a combination of selected fixes to ldbl-128ibm code that don't involve significant performance issues, allowing spurious underflow and inexact exceptions for that format, and lots of XFAILing for the default case of unpatched libgcc, it should be doable.) [BZ #887] [BZ #19049] [BZ #19050] * sysdeps/generic/fix-int-fp-convert-zero.h: New file. * sysdeps/ieee754/dbl-64/e_log10.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/e_log2.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_erf.c: Include <fix-int-fp-convert-zero.h>. (__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_logb.c: Include <fix-int-fp-convert-zero.h>. (__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log10f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log2f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_erff.c: Include <fix-int-fp-convert-zero.h>. (__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_logbf.c: Include <fix-int-fp-convert-zero.h>. (__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <fix-int-fp-convert-zero.h>. (__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include <fix-int-fp-convert-zero.h>. (__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/powerpc/powerpc32/fpu/configure.ac: New file. * sysdeps/powerpc/powerpc32/fpu/configure: New generated file. * sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New file. * config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
2015-10-01PowerPC: Add comments to optimized strncpyGabriel F. T. Gomes
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Added comments to some assembly instructions.
2015-10-01PowerPC: Fix operand prefixesGabriel F. T. Gomes
The file sysdeps/powerpc/sysdeps.h defines aliases for register operands, which add the letter 'r' as a prefix to a register name. E.g.: register 20 can be written as 'r20', instead of '20'. On the one hand, this increases readability, as it makes it easier for readers to know whether the operand is a register or an immediate. On the other hand, this permits that immediate operands be written as if they were registers, and vice-versa, thus reducing the readability of the code. This commit removes some of these unintentional misuses. This commit also increases readability of the code by adding the prefix 'cr' to some uses of the control register. Both changes have no effect on the final code. Checked with objdump. * sysdeps/powerpc/powerpc64/power8/strncpy.S: Remove or add register prefix from operands.
2015-09-24Fix hypot missing underflows (bug 18803).Joseph Myers
Similar to various other bugs in this area, hypot functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes. Note that this issue cannot arise for implementations of hypotf using double (or wider) for intermediate evaluation (if hypotf should underflow, that means the double square root is being computed of some number of the form N*2^-298, for 0 < N < 2^46, which is exactly represented as a double, and whatever the rounding mode such a square root cannot have a mantissa with all zeroes after the initial 23 bits). Thus no changes are made to hypotf implementations in this patch, only to hypot and hypotl. Tested for x86_64, x86, mips64 and powerpc. [BZ #18803] * sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN. (MO): New macro. (__ieee754_hypot) [PIC]: Load PIC register. (__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of DBL_NARROW_EVAL. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use math_check_force_underflow_nonneg in case where result might be tiny. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise. * math/auto-libm-test-in: Add more tests of hypot. * math/auto-libm-test-out: Regenerated.
2015-09-11Move bits/atomic.h to atomic-machine.h (bug 14912).Joseph Myers
It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/atomic.h to atomic-machine.h to follow that convention. This is the only change in this series that needs to change the filename rather than simply removing a directory level (because both atomic.h and bits/atomic.h exist at present). Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * sysdeps/aarch64/bits/atomic.h: Move to ... * sysdeps/aarch64/atomic-machine.h: ...here. (_AARCH64_BITS_ATOMIC_H): Rename macro to _AARCH64_ATOMIC_MACHINE_H. * sysdeps/alpha/bits/atomic.h: Move to ... * sysdeps/alpha/atomic-machine.h: ...here. * sysdeps/arm/bits/atomic.h: Move to ... * sysdeps/arm/atomic-machine.h: ...here. Update comments. * bits/atomic.h: Move to ... * sysdeps/generic/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/i386/bits/atomic.h: Move to ... * sysdeps/i386/atomic-machine.h: ...here. * sysdeps/ia64/bits/atomic.h: Move to ... * sysdeps/ia64/atomic-machine.h: ...here. * sysdeps/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ... * sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here. * sysdeps/microblaze/bits/atomic.h: Move to ... * sysdeps/microblaze/atomic-machine.h: ...here. * sysdeps/mips/bits/atomic.h: Move to ... * sysdeps/mips/atomic-machine.h: ...here. (_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H. * sysdeps/powerpc/bits/atomic.h: Move to ... * sysdeps/powerpc/atomic-machine.h: ...here. Update comments. * sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update comments. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/s390/bits/atomic.h: Move to ... * sysdeps/s390/atomic-machine.h: ...here. * sysdeps/sparc/sparc32/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here. * sysdeps/sparc/sparc64/bits/atomic.h: Move to ... * sysdeps/sparc/sparc64/atomic-machine.h: ...here. * sysdeps/tile/bits/atomic.h: Move to ... * sysdeps/tile/atomic-machine.h: ...here. * sysdeps/tile/tilegx/bits/atomic.h: Move to ... * sysdeps/tile/tilegx/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/tile/tilepro/bits/atomic.h: Move to ... * sysdeps/tile/tilepro/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include <sysdeps/arm/atomic-machine.h> instead of <sysdeps/arm/bits/atomic.h>. * sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here. (_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here. * sysdeps/x86_64/bits/atomic.h: Move to ... * sysdeps/x86_64/atomic-machine.h: ...here. * include/atomic.h: Include <atomic-machine.h> instead of <bits/atomic.h>.
2015-08-26powerpc: Sync hwcap.h with kernelCarlos Eduardo Seo
Linux commit b4b56f9ecab40f3b4ef53e130c9f6663be491894 introduced a new HWCAP2 bit to indicate that the kernel now aborts a memory transaction when a syscall is made. This patch adds that bit to sysdeps/powerpc/bits/hwcap.h. 2015-08-26 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com> * sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_HTM_NOSC. * sysdeps/powerpc/dl-procinfo.c: (_dl_powerpc_cap_flags): Added descriptor for this hwcap feature so it shows when LD_SHOW_AUXV=1.
2015-08-25powerpc: Fix tabort usage in syscallsPaul E. Murphy
Fix usage of tabort in generated syscalls. r0 has special meaning when used with this instruction, thus it will not generate persistent errors, nor return an error code. This mitigates poor CPU usage when performing elided critical sections. Additionally, transactions should be aborted when entering a user invoked syscall. Otherwise the results of the transaction may be undefined. 2015-08-25 Paul E. Murphy <murphyp@linux.vnet.ibm.com> * sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION): Use register other than r0 for tabort, it has special meaning. * sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION): Likewise * sysdeps/unix.sysv/linux/powerpc/syscall.S (syscall): Abort transaction before starting syscall.
2015-08-25powerpc: Handle worstcase behavior in strstr() for POWER7Rajalakshmi Srinivasaraghavan
Instead of checking needle length, constant 'n' number of comparisons is checked to fall back to default implementation. This patch is tested on powerpc64 and powerpc64le. 2015-08-25 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com> * sysdeps/powerpc/powerpc64/power7/strstr.S: Handle worst case.
2015-08-21powerpc: Fix memchr for powerpc32.Carlos Eduardo Seo
Fix a wrong #undef in memchr.c. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Replace '#undef memcpy' by '#undef memchr'.
2015-08-21powerpc: make memchr use memchr-power7.Carlos Eduardo Seo
In powerpc64, memchr was always pointing to the internal __GI_memchr implementation. This patch fixes that and makes it use the optimized POWER7 version when adequate. * sysdeps/powerpc/powerpc64/multiarch/memchr-ppc64.c: Make memchr not point to the internal __GI_memchr implementation.
2015-08-19PowerPC: Extend Program Priority Register supportGabriel F. T. Gomes
This patch adds extra inline functions to change the Program Priority Register from ISA 2.07. 2015-08-19 Gabriel F. T. Gomes <gftg@linux.vnet.ibm.com> * sysdeps/powerpc/sys/platform/ppc.h (__ppc_set_ppr_med_high, __ppc_set_ppr_very_low): New functions. * manual/platform.texi: Add documentation about __ppc_set_ppr_med_high and __ppc_set_ppr_very_low.
2015-08-18powerpc: Add missing hwcap strings.Carlos Eduardo Seo
Some features in hwcap.h do not have matching string descriptors to be displayed when LD_SHOW_AUXV=1. This patch fixes the problem. 2015-08-13 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com> * sysdeps/powerpc/dl-procinfo.c: (_dl_powerpc_cap_flags): Added missing strings for some hwcap features. * sysdeps/powerpc/dl-procinfo.h: Updated hwcap bit count.
2015-08-11powerpc: Fix stpcpy performance for power8Ondrej Bilka
This patch fixes the missing enablement for stpcpy on POWER8. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Fix ifunc.
2015-08-11powerpc: Fix PPC64/POWER7 conform testsAdhemerval Zanella
When building with --disable-multi-arch the memmove and strstr POWER7 optimization create and uses symbols that conflict with expect conform tests. * sysdeps/powerpc/powerpc64/power7/memmove.S (bcopy): Changing to __bcopy and add a weak_alias to bcopy. * sysdeps/powerpc/powerpc64/power7/strstr.S (strstr): Use __strnlen for static build.
2015-08-11powerpc: Use default strcpy optimization for POWER7Adhemerval Zanella
This patches uses the default strcpy/stpcpy implementation for POWER7/PPC64. This is faster in mostly inputs for benchtests and for multiarch the implementation uses the POWER7 strlen and memcpy. * string/stpcpy.c (__stpcpy): Use STPCPY to redefine symbol name and cleanup macro usage. * string/strcpy.c (strcpt): Use STRCPY to redefine symbol name. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.S: Remove file. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/power7/stpcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/stpcpy.S: Likewise. * sysdeps/powerpc/powerpc64/strcpy.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c [SHARED && IS_IN (libc)]: Include <string/strcpy.c>. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c [SHARED && IS_IN (libc)]: Include <string/stpcpy.c>. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.c: New file. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 01:20:13 +0000