| Age | Commit message (Collapse) | Author |
|---|
|
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
This patch removes the power6 wcsrchr optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
Checked on powerpc64-linux-gnu.
* sysdeps/powerpc/Makefile [$(subdir) == wcsmbs] (CFLAGS-wcsrchr.c):
New rule.
* sysdeps/powerpc/power6/wcsrchr.c: Remove file.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-power6.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-power7.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcsrchr-power6.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcsrchr-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcsrchr-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/power6/wcsrchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/Makefile
[$(subdir) == wcsmbs] (sysdeps_routines): Remove wcsrchr-power6 and
wcsrchr-power7.
(CFLAGS-wcsrchr-power7.c, CFLAGS-wcsrchr-power6.c): Remove rule.
* sysdeps/powerpc/powerpc64/multiarch/Makefile: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/ifunc-impl-list.c:
Remove wcsrchr optimizations.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Likewise.
|
|
This patch removes the power6 wcschr optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
Checked on powerpc64-linux-gnu.
* sysdeps/powerpc/Makefile [$(subdir) == wcsmbs] (CFLAGS-wcschr.c):
New rule.
* sysdeps/powerpc/power6/wcschr.c: Remove file.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-power6.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-power7.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr-power6.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc64/power6/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/Makefile
[$(subdir) == wcsmbs] (sysdeps_routines): Remove wcschr-power6 and
wcschr-power7.
(CFLAGS-wcschr-power7.c, CFLAGS-wcschr-power6.c): Remove rule.
* sysdeps/powerpc/powerpc64/multiarch/Makefile: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/ifunc-impl-list.c:
Remove wcschr optimizations.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Likewise.
|
|
This patch removes the power6 wcscpy optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
Checked on powerpc64-linux-gnu.
* sysdeps/powerpc/Makefile [$(subdir) == wcsmbs] (CFLAGS-wcscpy.c):
New rule.
* sysdeps/powerpc/power6/wcscpy.c: Remove file.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-power6.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-power7.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy-power6.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise.
* sysdeps/powerpc/powerpc64/power6/wcscpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/Makefile
[$(subdir) == wcsmbs] (sysdeps_routines): Remove wcscpy-power6 and
wcscpy-power7.
(CFLAGS-wcscpy-power7.c, CFLAGS-wcscpy-power6.c): Remove rule.
* sysdeps/powerpc/powerpc64/multiarch/Makefile: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/ifunc-impl-list.c:
Remove wcscpy optimizations.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
|
|
|
|
|
|
Use of strftime, a C90 function, ends up bringing in wcschr, which is
not a C90 function. Although not a conformance bug (C90 reserves
wcs*), this is still contrary to glibc practice of avoiding relying on
those reservations; this patch arranges for the internal uses to use
__wcschr instead, with wcschr being a weak alias. This is more
complicated than some such patches because of the various IFUNC
definitions of wcschr (which include code redefining libc_hidden_def
in a way that involves creating __GI_wcschr manually and so also needs
to create __GI___wcschr after the change of internal uses to use
__wcschr).
Tested for x86_64 and 32-bit x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
2014-12-10 Joseph Myers <joseph@codesourcery.com>
Adhemerval Zanella <azanella@linux.vnet.ibm.com>
[BZ #17634]
* wcsmbs/wcschr.c [!WCSCHR] (wcschr): Define as __wcschr.
Undefine after defining function. Define as weak alias of
__wcschr. Use libc_hidden_weak.
* include/wchar.h (__wcschr): Declare. Use libc_hidden_proto.
* sysdeps/i386/i686/multiarch/wcschr-c.c [IS_IN (libc) && SHARED]
(libc_hidden_def): Also define __GI___wcschr alias.
* sysdeps/i386/i686/multiarch/wcschr.S (wcschr): Rename to
__wcschr and define as weak alias of __wcschr.
* sysdeps/powerpc/power6/wcschr.c [!WCSCHR] (WCSCHR): Define as
__wcschr.
[!WCSCHR] (DEFAULT_WCSCHR): Define.
[DEFAULT_WCSCHR] (__wcschr): Use libc_hidden_def.
[DEFAULT_WCSCHR] (wcschr): Define as weak alias of __wcschr. Use
libc_hidden_weak. Do not use libc_hidden_def.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c
[IS_IN (libc) && SHARED] (libc_hidden_def): Also define
__GI___wcschr alias.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c
[IS_IN (libc)] (wcschr): Define as macro expanding to
__redirect_wcschr.
[IS_IN (libc)] (__wcschr_ppc): Use __redirect_wcschr in typeof.
[IS_IN (libc)] (__wcschr_power6): Likewise.
[IS_IN (libc)] (__wcschr_power7): Likewise.
[IS_IN (libc)] (__libc_wcschr): New. Define with libc_ifunc
instead of wcschr.
[IS_IN (libc)] (wcschr): Undefine and define as weak alias of
__libc_wcschr.
[!IS_IN (libc)] (libc_hidden_def): Do not undefine and redefine.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c (wcschr): Rename to
__wcschr and define as weak alias of __wcschr. Use
libc_hidden_builtin_def.
* sysdeps/x86_64/wcschr.S (wcschr): Rename to __wcschr and define
as weak alias of __wcschr. Use libc_hidden_weak.
* time/alt_digit.c (_nl_get_walt_digit): Use __wcschr instead of
wcschr.
* time/era.c (_nl_init_era_entries): Likewise.
* conform/Makefile (test-xfail-ISO/time.h/linknamespace): Remove
variable.
(test-xfail-XPG3/time.h/linknamespace): Likewise.
(test-xfail-XPG4/time.h/linknamespace): Likewise.
|
|
|
|
|
|
|
|
|
|
|
