aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/powerpc/Versions
AgeCommit message (Collapse)Author
2016-09-07Add femode_t functions.Joseph Myers
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2015-12-03powerpc: Add hwcap/hwcap2/platform data to TCB.Carlos Eduardo Seo
This patch adds a new feature for powerpc. In order to get faster access to the HWCAP/HWCAP2 bits and platform number (i.e. for implementing __builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of reading from the auxiliary vector, we now reserve space for them in the TCB. This is an ABI change for GLIBC 2.23. A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to get the data from the auxiliary vector and parse it, and store it for later use in the TLS initialization code. This function is called very early (in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and in __libc_start_main () for the static linking case) to make sure the data is available at the time of TLS initialization. * sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo. (sysdep_routines): Likewise. (sysdep-rtld-routines): Likewise. [$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static [$(subdir) = nptl](tests-static): test-get_hwcap-static * sysdeps/powerpc/Versions: Added new __parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23. * sysdeps/powerpc/hwcapinfo.c: New file. (__tcb_parse_hwcap_and_convert_at_platform): New function to initialize and parse hwcap, hwcap2 and platform number information. * sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables to store HWCAP+HWCAP2 and platform number. * sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets for HWCAP+HWCAP2 and platform number in the TCB. * sysdeps/powerpc/nptl/tls.h: New functionality. Stores the HWCAP, HWCAP2 and platform number in the TCB. (dtv): Added new fields for HWCAP+HWCAP2 and platform number. (TLS_INIT_TP): Included calls to add the hwcap and at_platform values in the TCB in TP initialization. (TLS_DEFINE_INIT_TP): Likewise. (THREAD_GET_HWCAP): New macro. (THREAD_SET_HWCAP): Likewise. (THREAD_GET_AT_PLATFORM): Likewise. (THREAD_SET_AT_PLATFORM): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h: (dl_platform_init): New function that calls __parse_hwcap_and_convert_at_platform for the dymanic linking case for powerpc32. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64. * sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for this functionality, static linking case. * sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic linking case. * sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to __parse_hwcap_and_convert_at_platform for the static linking case. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Included the new __parse_hwcap_and_convert_at_platform symbol in the ABI list for GLIBC 2.23. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
2015-03-25powerpc __tls_get_addr call optimizationAlan Modra
This patch is glibc support for a PowerPC TLS optimization, inspired by Alexandre Oliva's TLS optimization for other processors, http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt In essence, this optimization uses a zero module id in the tls_index GOT entry to indicate that a TLS variable is allocated space in the static TLS area. A special plt call linker stub for __tls_get_addr checks for such a tls_index and if found, returns the offset immediately. The linker communicates the fact that the special __tls_get_addr stub is used by setting a bit in the dynamic tag DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this optimization is available by the presence of __tls_get_addr_opt. tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for tst-tls-dlinfo, which otherwise would fail since it tests that no static tls is allocated. The ld option --no-tls-get-addr-optimize has been available since binutils-2.20 so doesn't need a configure test. * NEWS: Advertise TLS optimization. * elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define. (DT_PPC_NUM): Increment. * elf/dynamic-link.h (HAVE_STATIC_TLS): Define. (CHECK_STATIC_TLS): Use here. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize TLS descriptors. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/dl-tls.c: New file. * sysdeps/powerpc/Versions: Add __tls_get_addr_opt. * sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test. * sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test. Build tst-tlsmod2.so with --no-tls-get-addr-optimize. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
2004-02-14Update.Ulrich Drepper
2004-02-13 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/powerpc64/__longjmp-common.S: New file. * sysdeps/powerpc/powerpc64/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc64/bsd-_setjmp.S [NOT_IN_libc](_setjmp): Non-versioned _setjmp for rtld-_setjmp. [!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define as default version of _setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx_setjmp): Original version of _setjmp. * sysdeps/powerpc/powerpc64/bsd-setjmp.S (__vmxsetjmp): Branch to __vmx__sigsetjmp and define as default version of setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmxsetjmp): Original version of setjmp. * sysdeps/powerpc/powerpc64/setjmp-common.S: New file. * sysdeps/powerpc/powerpc64/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/powerpc32/__longjmp-common.S: New File * sysdeps/powerpc/powerpc32/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S [NOT_IN_libc](_setjmp): Non-versioned _setjmp for rtld-_setjmp. [!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define as default version of _setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx_setjmp): Original version of _setjmp. * sysdeps/powerpc/powerpc32/bsd-setjmp.S (__vmxsetjmp): Branch to __vmx__sigsetjmp and define as default version of setjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmxsetjmp): Original version of setjmp. * sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: New file. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S [NOT_IN_libc](__longjmp): Non-versioned __longjmp for rtld-__longjmp. [!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as default version of __longjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__longjmp): Original version of __longjmp. * sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: New file. * sysdeps/powerpc/powerpc32/fpu/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/powerpc32/setjmp-common.S: New file. * sysdeps/powerpc/powerpc32/setjmp.S [NOT_IN_libc](__setjmp): Non-versioned __sigsetjmp for rtld-setjmp. [!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define as default version of __sigsetjmp. [SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)] (__novmx__sigsetjmp): Original version of __sigsetjmp. * sysdeps/powerpc/Dist: New File. * sysdeps/powerpc/Makefile (sysdep_routines): Add novmx-longjmp.c and novmx-sigjmp.c * sysdeps/powerpc/Versions (libc): To GLIBC_2.3_4 add _longjmp, __sigsetjmp, _setjmp, longjmp, and setjmp. To GLIBC_PRIVATE add __novmx__libc_longjmp, __novmx__libc_siglongjmp, __vmx__libc_longjmp, and __vmx__libc_siglongjmp. * sysdeps/powerpc/bits/setjmp.h: Define JB_VRSAVE, JB_VRS, and adjust JB_SIZE to add VMX regs to __jmp_buf. * sysdeps/powerpc/longjmp.c: New file. * sysdeps/powerpc/novmxsetjmp.h: New file. * sysdeps/powerpc/novmx-longjmp.c: New file. * sysdeps/powerpc/novmx-sigjmp.c: New file. * sysdeps/powerpc/sigjmp.c: New file.
2002-09-05Update.Ulrich Drepper
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/__longjmp.S: Moved to... * sysdeps/powerpc/powerpc32/__longjmp.S: ...here. * sysdeps/powerpc/add_n.S: Moved to... * sysdeps/powerpc/powerpc32/add_n.S: ...here. * sysdeps/powerpc/addmul_1.S: Moved to... * sysdeps/powerpc/powerpc32/addmul_1.S: ...here. * sysdeps/powerpc/atomicity.h: Moved to... * sysdeps/powerpc/powerpc32/atomicity.h: ...here. * sysdeps/powerpc/backtrace.c: Moved to... * sysdeps/powerpc/powerpc32/backtrace.c: ...here. * sysdeps/powerpc/bp-asm.h: Moved to... * sysdeps/powerpc/powerpc32/bp-asm.h: ...here. * sysdeps/powerpc/bsd-_setjmp.S: Moved to... * sysdeps/powerpc/powerpc32/bsd-_setjmp.S: ...here. * sysdeps/powerpc/bsd-setjmp.S: Moved to... * sysdeps/powerpc/powerpc32/bsd-setjmp.S: ...here. * sysdeps/powerpc/dl-machine.c: Moved to... * sysdeps/powerpc/powerpc32/dl-machine.c: ...here. * sysdeps/powerpc/dl-machine.h: Moved to... * sysdeps/powerpc/powerpc32/dl-machine.h: ...here. * sysdeps/powerpc/dl-start.S: Moved to... * sysdeps/powerpc/powerpc32/dl-start.S: ...here. * sysdeps/powerpc/gprrest0.S: Moved to... * sysdeps/powerpc/powerpc32/gprrest0.S: ...here. * sysdeps/powerpc/gprrest1.S: Moved to... * sysdeps/powerpc/powerpc32/gprrest1.S: ...here. * sysdeps/powerpc/gprsave0.S: Moved to... * sysdeps/powerpc/powerpc32/gprsave0.S: ...here. * sysdeps/powerpc/gprsave1.S: Moved to... * sysdeps/powerpc/powerpc32/gprsave1.S: ...here. * sysdeps/powerpc/lshift.S: Moved to... * sysdeps/powerpc/powerpc32/lshift.S: ...here. * sysdeps/powerpc/memset.S: Moved to... * sysdeps/powerpc/powerpc32/memset.S: ...here. * sysdeps/powerpc/mul_1.S: Moved to... * sysdeps/powerpc/powerpc32/mul_1.S: ...here. * sysdeps/powerpc/ppc-mcount.S: Moved to... * sysdeps/powerpc/powerpc32/ppc-mcount.S: ...here. * sysdeps/powerpc/register-dump.h: Moved to... * sysdeps/powerpc/powerpc32/register-dump.h: ...here. * sysdeps/powerpc/rshift.S: Moved to... * sysdeps/powerpc/powerpc32/rshift.S: ...here. * sysdeps/powerpc/setjmp.S: Moved to... * sysdeps/powerpc/powerpc32/setjmp.S: ...here. * sysdeps/powerpc/stpcpy.S: Moved to... * sysdeps/powerpc/powerpc32/stpcpy.S: ...here. * sysdeps/powerpc/strchr.S: Moved to... * sysdeps/powerpc/powerpc32/strchr.S: ...here. * sysdeps/powerpc/strcmp.S: Moved to... * sysdeps/powerpc/powerpc32/strcmp.S: ...here. * sysdeps/powerpc/strcpy.S: Moved to... * sysdeps/powerpc/powerpc32/strcpy.S: ...here. * sysdeps/powerpc/strlen.S: Moved to... * sysdeps/powerpc/powerpc32/strlen.S: ...here. * sysdeps/powerpc/sub_n.S: Moved to... * sysdeps/powerpc/powerpc32/sub_n.S: ...here. * sysdeps/powerpc/submul_1.S: Moved to... * sysdeps/powerpc/powerpc32/submul_1.S: ...here. * sysdeps/powerpc/elf/bzero.S: Moved to... * sysdeps/powerpc/powerpc32/elf/bzero.S: ...here. * sysdeps/powerpc/elf/start.S: Moved to... * sysdeps/powerpc/powerpc32/elf/start.S: ...here. * sysdeps/powerpc/fpu/__longjmp.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/__longjmp.S: ...here. * sysdeps/powerpc/fpu/fprrest.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/fprrest.S: ...here. * sysdeps/powerpc/fpu/fprsave.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/fprsave.S: ...here. * sysdeps/powerpc/fpu/setjmp.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/setjmp.S: ...here. * sysdeps/powerpc/fpu/s_copysign.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/s_copysign.S: ...here. * sysdeps/powerpc/fpu/s_copysignf.S: Moved to... * sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: ...here. * sysdeps/unix/sysv/linux/powerpc/brk.S: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/brk.S: ...here. * sysdeps/unix/sysv/linux/powerpc/clone.S: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: ...here. * sysdeps/unix/sysv/linux/powerpc/glob64.c: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: ...here. * sysdeps/unix/sysv/linux/powerpc/kernel_stat.h: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: ...here. * sysdeps/unix/sysv/linux/powerpc/socket.S: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: ...here. * sysdeps/unix/sysv/linux/powerpc/sysdep.h: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: ...here. * sysdeps/unix/sysv/linux/powerpc/syscalls.list: Moved to... * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: ...here. Support PowerPC64. Separate powerpc into powerpc/powerpc32 and powerpc/powerpc64. 2002-07-29 Steven Munroe <sjmunroe@us.ibm.com> * FAQ.in: Add powerpc64 to supported targets list. Also state the minimum gcc version is 3.2 * README: Add powerpc64 to supported targets list. * configure.in: Change machine=powerpc to machine=powerpc/powerpc32. Add powerpc64 and machine=powerpc/powerpc64. (HAVE_ASM_GLOBAL_DOT_NAME): Define if linux*powerpc/powerpc64*. * shlib-versions: Set DEFAULT version to 2.2.5 for powerpc64. * sysdeps/powerpc/Dist: Remove dl-machine.c, dl-start.S, ppc-mcount.S, gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S. * sysdeps/powerpc/powerpc32/Dist: New file. * sysdeps/powerpc/Implies: Remove wordsize-32 and powerpc/soft-fp. * sysdeps/powerpc/powerpc32/Implies: New file. * sysdeps/powerpc/Makefile(cflags): Remove powerpc32 specific cflags. ($(with-fp) = no): Move test to powerpc32/Makefile. ($(subdir) = misc): Move to powerpc32/Makefile. ($(build-shared) = yes): Move to powerpc32/Makefile. ($(subdir) = csu): Move to powerpc32/Makefile. (sysdep-rtld-routines): Remove dl-start. Moved these bits to ... * sysdeps/powerpc/powerpc32/Makefile: New file. * sysdeps/powerpc/Versions: Remove libgcc functions. * sysdeps/powerpc/powerpc32/Versions: New file. * sysdeps/powerpc/fpu/Makefile: Remove fprsave and fprrest. * sysdeps/powerpc/powerpc32/fpu/Makefile: New file. * sysdeps/unix/sysv/linux/configure.in (powerpc*): Set arch_minimum_kernel=2.4.19 for powerpc/powerpc64. Also set libc_cv_gcc_unwind_find_fde=yes only if !powerpc/powerpc64. ($machine): Add powerpc/powerpc64 to if ... | for libc_cv_slibdir=/libc64. (powerpc*): Set ldd_rewrite_script. * sysdeps/unix/sysv/linux/powerpc/ldd-rewrite.sed: New file. * sysdeps/unix/sysv/linux/powerpc/Dist: Remove clone.S. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: New file. Add clone.S. * sysdeps/unix/sysv/linux/powerpc/Makefile: Remove oldgetrlimit64. * sysdeps/unix/sysv/linux/powerpc/Versions: Remove GLIBC_2.0 functions. Remove GLIBC_2.2 functions except getrlimit and setrlimit. Moved them to ... * sysdeps/unix/sysv/linux/powerpc/powerpc32/Versions: New file. 2002-09-04 Ulrich Drepper <drepper@redhat.com> * libio/tst-atime.c: Include <errno.h>. (do_test): Only perform fstatvfs check if ST_NOATIME is defined. 2002-09-03 Isamu Hasegawa <isamu@yamato.ibm.com> * posix/regcomp.c (regcomp): Append "__restrict" modifier to avoid warnings of some compilers. (build_collating_symbol): Change the type of characters from "unsigned char" to "char", and append a cast to "char*" pointer in array subscript. (build_collating_symbol): Likewise. (build_equiv_class): Likewise. (build_charclass): Likewise. (re_compile_pattern): Remove incorrect cast. (re_compile_fastmap_iter): Change the type of characters from "unsigned char" to "char", and append a cast to "char*" pointer in array subscript. (parse_bracket_exp): Likewise. * posix/regex_internal.c (re_string_construct_common): Likewise. (re_string_allocate): Likewise. (re_string_construct): Likewise. (re_string_realloc_buffers): Likewise. (build_wcs_buffer): Likewise. (re_string_reconstruct): Likewise. * posix/regex_internal.h: Change the type of characters in re_string_t and bracket_elem_t from "unsigned char" to "char". * posix/regexec.c (regexec): Append "__restrict" modifier to avoid warnings of some compilers. (transit_state_bkref_loop): Change the type of characters from "unsigned char" to "char", and append a cast to "char*" pointer in array subscript. (check_node_accept_bytes): Likewise. (find_collation_sequence_value): Likewise.
2002-08-20Fix ABI compatibility with libc compiled with old tools on powerpc.Roland McGrath
Changes contributed by Franz Sirl <Franz.Sirl-kernel@lauterbach.com> and Jack Howarth <howarth@bromo.med.uc.edu>. * sysdeps/powerpc/Makefile [$(have-protected) = yes] (CPPFLAGS-divdi3.c, CPPFLAGS-libgcc-compat.S): New variables, pass -DHAVE_DOT_HIDDEN for these files. * sysdeps/powerpc/Versions (libc: GLIBC_2.0): Added __floatdidf, __floatdisf. * sysdeps/powerpc/divdi3.c: New file. * sysdeps/powerpc/libgcc-compat.S: New file, replacement for ... * sysdeps/powerpc/libgcc-compat.c: ... this, file removed.
2002-05-15Update.Ulrich Drepper
2002-05-12 Bruno Haible <bruno@clisp.org> * iconvdata/testdata/EUC-JISX0213: New file. * iconvdata/testdata/EUC-JISX0213..UTF8: New file. * iconvdata/testdata/SHIFT_JISX0213: New file. * iconvdata/testdata/SHIFT_JISX0213..UTF8: New file. * iconvdata/testdata/ISO-2022-JP-3: New file. * iconvdata/testdata/ISO-2022-JP-3..UTF8: New file. * iconvdata/TESTS: Add EUC-JISX0213, SHIFT_JISX0213, ISO-2022-JP-3. * iconvdata/run-iconv-test.sh: Skip the charmap test if the charmap contains comments indicating precomposed characters. 2002-04-21 Bruno Haible <bruno@clisp.org> * iconvdata/iso-2022-jp-3.c: New file. * iconvdata/gconv-modules (ISO-2022-JP-3): New module. * iconvdata/Makefile (modules): Add ISO-2022-JP-3. (LDFLAGS-ISO-2022-JP-3.so): New variable. (ISO-2022-JP-3.so): Depend on libJIS.so and libJISX0213.so. (distribute): Add iso-2022-jp-3.c. 2002-05-12 Bruno Haible <bruno@clisp.org> * iconvdata/tst-table-to.c (main): Restore handling of transliterations, broken by last patch. 2002-05-12 Bruno Haible <bruno@clisp.org> * iconvdata/TESTS: Add IBM922, IBM1124, IBM1129. 2002-05-12 Bruno Haible <bruno@clisp.org> * iconvdata/euc-jisx0213.c (BODY for FROM_LOOP): Don't advance inptr when there is not enough room in the output buffer. * iconvdata/shift_jisx0213.c (BODY for FROM_LOOP): Likewise. 2002-04-20 Bruno Haible <bruno@clisp.org> * iconv/skeleton.c ({FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO}): New macros. (RESET_INPUT_BUFFER): Use them instead of {MIN,MAX}_NEEDED_{FROM,TO}. Also make this macro work if FROM_DIRECTION evaluates to 0. (gconv_init): Use the new macros instead of {MIN,MAX}_NEEDED_{FROM,TO}. (FUNCTION_NAME): Likewise, in the handling of unaligned accesses and of consume_incomplete. * iconvdata/cp1255.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to 4, not 8. * iconvdata/cp1258.c: Likewise. * iconvdata/ibm930.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 3, not 2. * iconvdata/ibm933.c: Likewise. * iconvdata/ibm935.c: Likewise. * iconvdata/ibm937.c: Likewise. * iconvdata/ibm939.c: Likewise. * iconvdata/iso-2022-cn.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set TO_LOOP_MAX_NEEDED_TO to 6, not 4. * iconvdata/iso-2022-cn-ext.c: Likewise. * iconvdata/iso-2022-jp.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. * iconvdata/tcvn5712-1.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_FROM to 1, not 2. * iconvdata/euc-jisx0213.c: Define {FROM,TO}_LOOP_{MIN,MAX}_NEEDED_{FROM,TO} instead of {MIN,MAX}_NEEDED_{FROM,TO}. Set FROM_LOOP_MAX_NEEDED_TO to 8, not 4. * iconvdata/shift_jisx0213.c: Likewise. 2002-05-14 Franz Sirl <Franz.Sirl-kernel@lauterbach.com> * sysdeps/powerpc/Makefile (sysdeps_routines): Add divdi3, cmpdi2, shdi3, fixdfdi, fixsfdi in csu dir. (shared-only-routines): Likewise. * sysdeps/wordsize-32/cmpdi2.c: New file. * sysdeps/wordsize-32/shdi3.c: New file. * sysdeps/wordsize-32/fixdfdi.c: New file. * sysdeps/wordsize-32/fixsfdi.c: New file. * sysdeps/powerpc/Versions (__divdi3, __moddi3, __udivdi3, __umoddi3, __ashldi3, __ashrdi3, __lshrdi3, __cmpdi2, __ucmpdi2, __fixdfdi, __fixsfdi, __fixunsdfdi, __fixunssfdi): Export at GLIBC_2.0. * sysdeps/unix/sysv/linux/semctl.c (__old_semctl, __new_semctl): Only use va_arg if the argument will be used [PR libc/3259]. 2002-05-06 Michael A. Schmidt <mmaass@us.ibm.com> * catgets/catgets.c (catopen): Free buffer if internal catalog open fails. 2002-05-14 Ulrich Drepper <drepper@redhat.com> * debug/xtrace.sh: Make more robust. For realtime tracking use non-buffering methods. * debug/pcprofiledump.c: Implement -u option. Patch by Roger Luethi <rl@hellgate.ch>.
2000-02-28Update.Ulrich Drepper
* sysdeps/powerpc/Versions: Export _savegpr* and _restgpr* functions.
1998-07-10Update.Ulrich Drepper
1998-07-09 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * Make-dist (+sysdep-tsrcs): Add Versions. 1998-07-09 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> * math/Versions: Remove __log1p, __atan2, __fe_dfl_env, __fe_enabled_env, __fe_nonieee_env and __fe_nomask_env. * sysdeps/powerpc/Versions: New file. * csu/Versions: Remove brk, sbrk, environ, __environ, _environ and __errno_location. * misc/Versions: Add brk and sbrk. * posix/Versions: Add environ, __environ and _environ. * sysdeps/unix/sysv/linux/Versions: Add __errno_location. 1998-07-10 11:58 Ulrich Drepper <drepper@cygnus.com> * Makerules [no_defs]: Avoid dependency for loading sysd-versions. Patch by Zack Weinberg. 1998-07-10 Andreas Jaeger <aj@arthur.rhein-neckar.de> * posix/annexc.c (errno_maybe): EACCESS->EACCES. (signal_maybe): Remove duplicate entry SIGEV_SIGNAL. (mman_maybe): Remove duplicates MS_ASYNC, MS_INVALIDATE. * signal/signal.h: Define pid_t also for __USE_XOPEN.
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 11:41:15 +0000