| Age | Commit message (Collapse) | Author |
|---|
|
Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
* elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count):
Define variable.
* sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct
rtld_global): Add _dl_thread_gscope_count member.
* sysdeps/mach/hurd/tls.h: Include <atomic.h>.
[!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG,
THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros.
* sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB.
* sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
* sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1.
|
|
The general rule in glibc is that it's better for a macro to be always
defined, and tested with #if, than for it to be tested with #ifdef,
because the latter is prone to typos in the macro name as well as to
the header with the macro accidentally not being included in a file
testing it. (Testing with an "if" statement is even better, in those
cases where it's possible to do things that way, as it then means both
cases in the code get checked for syntax in glibc builds with either
value of the condition.)
math_private.h has several different groups of macros, meaning that
architectures wanting to override some of them need to define those
then include the generic version, which then defines macros if not
already defined. It's hard to avoid that arrangement completely, but
various cases can be improved by splitting out macros or groups of
macros into separate files.
This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate
ldbl-classify-compat.h header. This macro is tested with #ifdef; this
patch changes it to testing with #if, with a default definition to 0
in the generic header and then architecture-specific headers defining
it to 1.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/generic/ldbl-classify-compat.h: New file.
* sysdeps/arm/ldbl-classify-compat.h: Likewise.
* sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise.
* sysdeps/microblaze/ldbl-classify-compat.h: Likewise.
* sysdeps/mips/ldbl-classify-compat.h: Likewise.
* sysdeps/nios2/ldbl-classify-compat.h: Likewise.
* sysdeps/sh/ldbl-classify-compat.h: Likewise.
* sysdeps/ieee754/dbl-64/s_finite.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/s_isinf.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/s_isnan.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro.
* sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise.
* sysdeps/m68k/coldfire/math_private.h: Remove file.
* sysdeps/microblaze/math_private.h: Likewise.
* sysdeps/nios2/math_private.h: Likewise.
* sysdeps/sh/math_private.h: Likewise.
|
|
math_private.h headers for configurations lacking support for
floating-point exceptions and rounding modes define
libc_feholdexcept_setround to override the default version with one
that discards its rounding mode argument.
Unlike other such libc_fe* macros that I removed, this one is actually
used for such configurations (in dbl-64/e_sqrt.c). However, this does
not make the macro required. It's only used for such configurations
with FE_TONEAREST as the rounding mode (anything needing another mode
should not be used when that mode is unavailable), and the default
definition just calls __feholdexcept and __fesetround. Since we now
have suitable inline do-nothing definitions of __feholdexcept and
__fesetround for the cases of no exceptions and rounding modes, we can
just rely on those inlines to achieve the same optimization as this
macro definition. Thus, this patch removes those macro definitions
(and the math_private.h headers containing them, when no longer needed
after that removal).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/m68k/coldfire/fpu/math_private.h: Move to ....
* sysdeps/m68k/coldfire/math_private.h: ... here.
* sysdeps/m68k/coldfire/nofpu/math_private.h: Remove file.
* sysdeps/tile/math_private.h: Likewise.
* sysdeps/microblaze/math_private.h (libc_feholdexcept_setround):
Remove macro.
* sysdeps/nios2/math_private.h (libc_feholdexcept_setround):
Likewise.
|
|
math_private.h headers for configurations lacking support for
floating-point exceptions and rounding modes define various libc_fe*
macros to override the default versions with ones that discard any
exception or rounding mode arguments.
Three of the four macros defined in these headers are no longer needed
there: those macros are only used in fma implementations that are not
used for such configurations, now all those configurations properly
use soft-fp fma implementations instead. (Effectively, those macros
were a workaround to allow glibc to build in the absence of a proper
fma implementation for this case - now there is such an
implementation, there is no need to support building the wrong
implementation for those configurations.) Thus, this patch removes
the unnecessary macros.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/m68k/coldfire/nofpu/math_private.h (libc_fesetround):
Remove macro.
(libc_fetestexcept): Likewise.
(libc_feupdateenv_test): Likewise.
* sysdeps/microblaze/math_private.h (libc_fesetround): Likewise.
(libc_fetestexcept): Likewise.
(libc_feupdateenv_test): Likewise.
* sysdeps/nios2/math_private.h (libc_fesetround): Likewise.
(libc_fetestexcept): Likewise.
(libc_feupdateenv_test): Likewise.
* sysdeps/tile/math_private.h (libc_fesetround): Likewise.
(libc_fetestexcept): Likewise.
(libc_feupdateenv_test): Likewise.
|
|
Various configurations lacking support for floating-point exceptions
and rounding modes have a math_private.h that overrides certain
functions and macros, internal and external, to avoid references to
FE_* constants that are undefined in those configurations. For
example, there are unconditional feraiseexcept (FE_INVALID) calls in
generic libm code, and these macro definitions duly define
feraiseexcept to ignore its argument to avoid an error from FE_INVALID
being undefined.
In fact it is easy to tell in an architecture-independent way whether
this is needed, by testing whether FE_ALL_EXCEPT == 0. Thus, this
patch puts such a test, and feraiseexcept and __feraiseexcept macros,
in the generic math_private.h, so reducing the duplication between
architecture versions of this header. The feclearexcept macro present
in several versions of this header, and fetestexcept in the tile
version, are not needed; they would have been needed before there were
proper soft-fp fma implementations (when generic versions, that depend
on FE_TOWARDZERO and FE_INEXACT, were being used for configurations
not supporting those features), but aren't needed any more, and so are
removed.
The tile version of this header has several inline functions for
fenv.h functions to optimize calls to them away in such configurations
where they do nothing useful, and all these header versions also have
definitions of some of the libc_fe* internal macros. I intend to make
those generic in subsequent patches.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/generic/math_private.h [FE_ALL_EXCEPT == 0]
(feraiseexcept): New macro.
[FE_ALL_EXCEPT == 0] (__feraiseexcept): Likewise.
* sysdeps/m68k/coldfire/nofpu/math_private.h (feraiseexcept):
Remove macro.
(__feraiseexcept): Likewise.
(feclearexcept): Likewise.
* sysdeps/microblaze/math_private.h (feraiseexcept): Likewise.
(__feraiseexcept): Likewise.
(feclearexcept): Likewise.
* sysdeps/nios2/math_private.h (feraiseexcept): Likewise.
(__feraiseexcept): Likewise.
(feclearexcept): Likewise.
* sysdeps/tile/math_private.h (feraiseexcept): Likewise.
(__feraiseexcept): Likewise.
(feclearexcept): Likewise.
(fetestexcept): Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
|
|
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
* sysdeps/microblaze/libm-test-ulps: Update.
|
|
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
|
|
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
|
|
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
|
|
I noticed that some libm-test-ulps files still had long-obsolete
entries for *_tonearest functions, which will no longer be used since
functions with FE_TONEAREST explicitly set aren't tested separately
from those functions with it as the default rounding mode any more.
This patch removes those obsolete entries. However, as they are a
sign of libm-test-ulps not having been regenerated from scratch for a
long time, I strongly advise people testing on those platforms to
remove / truncate the libm-test-ulps file, run "make regen-ulps" and
commit the regenerated-from-scratch file. (Ideally any failures of
libm tests still present after regeneration would be investigated /
fixed - there are several open "math" bugs spread across these
platforms - but simply regenerating from scratch improves things.)
* sysdeps/hppa/fpu/libm-test-ulps: Remove *_tonearest entries.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
|
|
This replaces the pthread rwlock with a new implementation that uses a
more scalable algorithm (primarily through not using a critical section
anymore to make state changes). The fast path for rdlock acquisition and
release is now basically a single atomic read-modify write or CAS and a few
branches. See nptl/pthread_rwlock_common.c for details.
* nptl/DESIGN-rwlock.txt: Remove.
* nptl/lowlevelrwlock.sym: Remove.
* nptl/Makefile: Add new tests.
* nptl/pthread_rwlock_common.c: New file. Contains the new rwlock.
* nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove.
(PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED,
PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT,
PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER,
PTHREAD_RWLOCK_FUTEX_USED): New.
* nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new
implementation.
* nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove.
(__pthread_rwlock_rdlock): Adapt.
* nptl/pthread_rwlock_timedrdlock.c
(pthread_rwlock_timedrdlock): Adapt.
* nptl/pthread_rwlock_timedwrlock.c
(pthread_rwlock_timedwrlock): Adapt.
* nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt.
* nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt.
* nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove.
(__pthread_rwlock_wrlock): Adapt.
* nptl/tst-rwlock10.c: Adapt.
* nptl/tst-rwlock11.c: Adapt.
* nptl/tst-rwlock17.c: New file.
* nptl/tst-rwlock18.c: New file.
* nptl/tst-rwlock19.c: New file.
* nptl/tst-rwlock2b.c: New file.
* nptl/tst-rwlock8.c: Adapt.
* nptl/tst-rwlock9.c: Adapt.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h
(pthread_rwlock_t): Adapt.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h
(pthread_rwlock_t): Adapt.
* sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* nptl/nptl-printers.py (): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-rwlock-printers.py: Adapt.
* nptl/test-rwlockattr-printers.c: Adapt.
* nptl/test-rwlockattr-printers.py: Adapt.
|
|
For MicroBlaze, setjmp/check-installed-headers-cxx fails with:
../setjmp/setjmp.h:34:8: error: '__jmp_buf_tag' has a field '__jmp_buf_tag::__jmpbuf' whose type depends on the type '<unnamed struct>' which has no linkage [-Werror=subobject-linkage]
This patch fixes this in the same way as for some other architectures:
the struct used for the internal __jmp_buf type is given the tag
__jmp_buf_internal_tag.
Tested (compilation tests) with build-many-glibcs.py.
* sysdeps/microblaze/bits/setjmp.h (__jmp_buf): Give struct tag
__jmp_buf_internal_tag.
|
|
Many linknamespace tests fail for MicroBlaze because __backtrace (as
brought in by libc_fatal.c) uses an inline function get_frame_size
which is not declared static. This patch fixes it to be declared
static.
Tested (compilation tests) with build-many-glibcs.py.
[BZ #21022]
* sysdeps/microblaze/backtrace.c (get_frame_size): Make static.
|
|
|
|
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.
We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order. Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up. This is something the previous
algorithm violated (see bug 13165).
There's another issue specific to condvars: ABA issues on the underlying
futexes. Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters. A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2). Once G1 is empty, G2
becomes the new G1. 64b counters are used to avoid ABA issues.
This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program). I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage). Thus, a
thundering herd problem is a scalability problem with or without the
optimization. Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex. Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it. Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state. This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.
[BZ #13165]
* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
use new algorithm.
* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
(__condvar_confirm_wakeup, __condvar_cancel_waiting,
__condvar_cleanup_waiting, __condvar_dec_grefs,
__pthread_cond_wait_common): New.
(__condvar_cleanup): Remove.
* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
Likewise.
* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
* nptl/tst-cond1.c: Add comment.
* nptl/tst-cond20.c (do_test): Adapt.
* nptl/tst-cond22.c (do_test): Likewise.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
structure.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
(COND_CLOCK_BITS): Adapt.
* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
__PTHREAD_COND_SHARED_MASK): New.
* nptl/nptl-printers.py (CLOCK_IDS): Remove.
(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-cond-printers.py: Adapt.
* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
cond_compat_check_and_clear): Adapt.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_timedwait): ... and move here.
* nptl/DESIGN-condvar.txt: Remove file.
* nptl/lowlevelcond.sym: Likewise.
* nptl/pthread_cond_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
|
|
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
|
|
|
|
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
|
|
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
|
|
atomic_compare_and_exchange_bool_rel and
catomic_compare_and_exchange_bool_rel are removed and replaced with the
new C11-like atomic_compare_exchange_weak_release. The concurrent code
in nscd/cache.c has not been reviewed yet, so this patch does not add
detailed comments.
* nscd/cache.c (cache_add): Use new C11-like atomic operation instead
of atomic_compare_and_exchange_bool_rel.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
* include/atomic.h (atomic_compare_and_exchange_bool_rel,
catomic_compare_and_exchange_bool_rel): Remove.
* sysdeps/aarch64/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/alpha/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/arm/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/mips/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/tile/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
|
|
Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were
repeated for all architectures using DTVs.
|
|
|
|
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.
To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors. However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.
For tile, remove the now-unnecessary exports of those functions from
libc and libm.
|
|
Various math_private.h headers are guarded by "#ifndef
_MATH_PRIVATE_H", but never define the macro. Nothing else defines
the macro either (the generic math_private.h that they include defines
a different macro, _MATH_PRIVATE_H_), so those guards are ineffective.
With the recent inclusion of s_sin.c in s_sincos.c, this breaks the
build for MIPS, since the build of s_sincos.c ends up including
<math_private.h> twice and the MIPS version defines inline functions
such as libc_feholdexcept_mips, without a separate fenv_private.h
header with its own guards such as some architectures have.
This patch fixes all the problem headers to use architecture-specific
guard macro names, and to define those macros in the headers they
guard, just as some architectures already do.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch), and for mips64 (that it fixes the build).
* sysdeps/arm/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!ARM_MATH_PRIVATE_H].
[!ARM_MATH_PRIVATE_H] (ARM_MATH_PRIVATE_H): Define macro.
* sysdeps/hppa/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!HPPA_MATH_PRIVATE_H].
[!HPPA_MATH_PRIVATE_H] (HPPA_MATH_PRIVATE_H): Define macro.
* sysdeps/i386/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard
to [!I386_MATH_PRIVATE_H].
[!I386_MATH_PRIVATE_H] (I386_MATH_PRIVATE_H): Define macro.
* sysdeps/m68k/m680x0/fpu/math_private.h [!_MATH_PRIVATE_H]:
Change guard to [!M68K_MATH_PRIVATE_H].
[!M68K_MATH_PRIVATE_H] (M68K_MATH_PRIVATE_H): Define macro.
* sysdeps/microblaze/math_private.h [!_MATH_PRIVATE_H]: Change
guard to [!MICROBLAZE_MATH_PRIVATE_H].
[!MICROBLAZE_MATH_PRIVATE_H] (MICROBLAZE_MATH_PRIVATE_H): Define
macro.
* sysdeps/mips/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!MIPS_MATH_PRIVATE_H].
[!MIPS_MATH_PRIVATE_H] (MIPS_MATH_PRIVATE_H): Define macro.
* sysdeps/nios2/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!NIO2_MATH_PRIVATE_H].
[!NIO2_MATH_PRIVATE_H] (NIO2_MATH_PRIVATE_H): Define macro.
* sysdeps/tile/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!TILE_MATH_PRIVATE_H].
[!TILE_MATH_PRIVATE_H] (TILE_MATH_PRIVATE_H): Define macro.
|
|
Systems without floating-point exceptions and rounding modes should
use the soft-fp versions of fmaf and fma, not the sysdeps/ieee754
versions that rely on setting rounding to zero and testing for the
"inexact" exception; this has been noted on
<https://sourceware.org/glibc/wiki/PortStatus> for some time. This
patch makes MicroBlaze use the soft-fp files; sfp-machine.h is made to
include the nios2 version of sfp-machine.h which seems sufficiently
generic for 32-bit systems.
[BZ #13304]
* sysdeps/microblaze/s_fma.c: New file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/microblaze/sfp-machine.h: Likewise.
|
|
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
|
|
Other architectures also had bugs, or did unnecessary work.
|
|
ELF_RTYPE_CLASS_NOCOPY in comments is a typo. It should be
ELF_RTYPE_CLASS_COPY.
[BZ #18082]
* sysdeps/alpha/dl-machine.h (elf_machine_type_class): Replace
ELF_RTYPE_CLASS_NOCOPY with ELF_RTYPE_CLASS_COPY in comments.
* sysdeps/arm/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_type_class):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_type_class): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_type_class): Likewise.
|
|
2015-01-06 David Holsgrove <david.holsgrove@xilinx.com>
* sysdeps/microblaze/jmpbuf-unwind.h (_jmpbuf_sp): Declare SP as void
pointer and cast to uintptr_t.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
|
|
Resolves warning: 'optimization may eliminate reads and/or writes to
register variables'
2015-01-06 David Holsgrove <david.holsgrove@xilinx.com>
* sysdeps/microblaze/nptl/tls.h: Remove inline
__microblaze_get_thread_area and update READ_THREAD_POINTER.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
|
|
2015-01-06 David Holsgrove <david.holsgrove@xilinx.com>
* sysdeps/microblaze/nptl/tls.h (TLS_INIT_TP): Use NULL instead
of 0.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
|
|
|
|
Various C90 and UNIX98 libm functions call feraiseexcept, which is not
in those standards. This causes linknamespace test failures - except
on x86 / x86_64, where feraiseexcept is inline (for the relevant
constant arguments) in bits/fenv.h.
This patch fixes this by making those functions call __feraiseexcept
instead. All changes are applied to all architectures rather than
considering the possibility that some might not be needed in some
cases (e.g. x86) as it seems most maintainable to keep architectures
consistent.
Where __feraiseexcept does not exist, it is added, with feraiseexcept
made a weak alias; where it is a strong alias, it is made weak.
libm_hidden_def / libm_hidden_proto are used with __feraiseexcept
(this might in some cases improve code generation for existing calls
to __feraiseexcept in some code on some architectures). Where there
are dummy feraiseexcept macros (on architectures without
floating-point exceptions support, to avoid compile errors from
references to undefined FE_* macros), corresponding dummy
__feraiseexcept macros are added. And on x86, to ensure
__feraiseexcept calls still get inlined, the inline function in
bits/fenv.h is refactored so that most of it can be reused in an
inline __feraiseexcept in a separate include/bits/fenv.h.
Calls are changed in C90/UNIX98 functions, but generally not in
functions missing from those standards. They are also changed in
libc_fe* functions (on the basis that those might be used in any libm
function), and in feupdateenv (on the same basis - may be used, via
default libc_*, in any libm function - of course feupdateenv will need
changing to __feupdateenv in a subsequent patch to make that fully
namespace-clean).
No __feraiseexcept is added corresponding to the feraiseexcept in
powerpc bits/fenvinline.h, because that macro definition is
conditional on !defined __NO_MATH_INLINES, and glibc libm is built
with -D__NO_MATH_INLINES, so changing internal calls to use
__feraiseexcept should make no difference.
Tested for x86_64 (testsuite; the only change in disassembly of
installed shared libraries is a slight code reordering in clog10, of
no apparent significance). Also tested for MIPS, where (in the
configuration tested) it eliminates math.h linknamespace failures for
n32 and n64 (some for o32 remain because of other issues).
[BZ #17723]
* include/fenv.h (__feraiseexcept): Use libm_hidden_proto.
* math/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/arm/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/hppa/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/i386/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/ia64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/m68k/coldfire/fpu/fraiseexcpt.c (feraiseexcept):
Likewise.
* sysdeps/microblaze/math_private.h (__feraiseexcept): New macro.
* sysdeps/mips/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fraiseexcpt.c
(__feraiseexcept): Likewise.
* sysdeps/s390/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/sparc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feraiseexcept): New macro.
* sysdeps/unix/sysv/linux/alpha/fraiseexcpt.S (__feraiseexcept):
Use libm_hidden_def.
* sysdeps/x86_64/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
(feraiseexcept): Define as weak not strong alias. Use
libm_hidden_weak.
* sysdeps/x86/fpu/bits/fenv.h (__feraiseexcept_invalid_divbyzero):
New inline function. Factored out of ...
(feraiseexcept): ... here. Use __feraiseexcept_invalid_divbyzero.
* sysdeps/x86/fpu/include/bits/fenv.h: New file.
* math/e_scalb.c (invalid_fn): Call __feraiseexcept instead of
feraiseexcept.
* math/w_acos.c (__acos): Likewise.
* math/w_asin.c (__asin): Likewise.
* math/w_ilogb.c (__ilogb): Likewise.
* math/w_j0.c (y0): Likewise.
* math/w_j1.c (y1): Likewise.
* math/w_jn.c (yn): Likewise.
* math/w_log.c (__log): Likewise.
* math/w_log10.c (__log10): Likewise.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/aarch64/fpu/math_private.h
(libc_feupdateenv_test_aarch64): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/arm/fenv_private.h (libc_feupdateenv_test_vfp): Likewise.
* sysdeps/arm/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
|
|
|
|
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
|
|
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
|
|
Various architectures have files such as sysdeps/<arch>/shlib-versions
whose contents are in fact entirely Linux-specific, relating only to
the symbol / shared library versions for the port to Linux on that
architecture, when any future port to a different OS on that
architecture would use the symbol version of the glibc release it goes
in, as standard for new ports.
This patch moves such files under sysdeps/unix/sysv/linux/, merging in
the contents of sysdeps/<arch>/nptl/shlib-versions in the process.
The only bits not moved are those relating to libgcc_s versions, which
don't appear OS-specific in the same way that glibc's symbol versions
so. It deliberately does not change the regular expressions given for
matching configurations in each file; some match only Linux although
not Linux-specific, or match other OSes although Linux-specific. It
is with a view to at least the following further cleanups:
* Move architecture-specific content from the toplevel shlib-versions
and nptl/shlib-versions into sysdeps shlib-versions files, so
eliminating another difference between ex-ports and non-ex-ports
architectures.
* Likewise, for OS-specific content in shlib-versions files.
* At that point, the first field in shlib-versions files (the regular
expression matching a configuration triplet) should be redundant, so
eliminate that field and leave shlib-versions selection working
purely on a sysdeps basis (with limited use of %ifdef in
shlib-versions files when needed) rather than having its own
separate mechanism to select what configuration information is
relevant.
* Move the build of gnu/lib-names.h to a similar mechanism to that
used for gnu/stubs.h (each library build installing a version of the
header specifically for that build), so we can eliminate the
duplication of soname information in the makefiles and get it purely
from shlib-versions files again.
There may be other cleanups possible as well (in particular, I'm not
sure that all cases where the same "Earliest symbol set" information
is repeated for many different libraries actually should need to
repeat it rather than specifying it just once for DEFAULT for the
given configuration, and separately specifying any non-default choices
of soname).
Tested x86_64 that the installed shared libraries are unchanged by
this patch.
* sysdeps/aarch64/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: ... here.
* sysdeps/alpha/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/alpha/shlib-versions: ... here.
* sysdeps/arm/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/arm/shlib-versions: ... here.
* sysdeps/hppa/shlib-versions: Move all contents except for
libgcc_s entry to ...
* sysdeps/unix/sysv/linux/hppa/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/hppa/nptl/shlib-versions: ... here. Remove file.
* sysdeps/ia64/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/ia64/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/ia64/nptl/shlib-versions: ... here. Remove file.
* sysdeps/m68k/coldfire/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: ... here.
* sysdeps/microblaze/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: ... here.
* sysdeps/mips/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/mips/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/mips/nptl/shlib-versions: ... here. Remove file.
* sysdeps/tile/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/tile/shlib-versions: ... here.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Merge in entry
from ...
* sysdeps/x86_64/64/shlib-versions: ... here. Remove file.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Merge in
entry from ...
* sysdeps/x86_64/x32/shlib-versions: ... here. Remove file.
|
|
|
|
|
|
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
|
|
|
|
|
|
|
|
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
|
