aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/alpha
AgeCommit message (Collapse)Author
2018-01-27Update Alpha libm-test-ulpsJames Clarke
* sysdeps/alpha/fpu/libm-test-ulps: Update. Signed-off-by: James Clarke <jrtc27@jrtc27.com>
2018-01-04alpha: Remove s_trunc{f} implementation (BZ#22666)Adhemerval Zanella
As discussed in libc-alpha [1], alpha trunc{f} implementation uses addt/suc and subt/suc and although the Alpha Architecture Handbook version 3 states that that ADDx SUBx OUTPUT Exceptions (B.3 Mapping to IEEE Standard) should not generate Inexact if INE bit is set, the Alpha 21264 [2] chip manual (A.8 IEEE Floating-Point Conformance) states that ADDx SUBx OUTPUT does generate inexact exception for inexact result regardless. As Joseph noted [3] to correctly fix it on alpha we need to either avoid the instruction or avoid any inexact bit from it being set on return from the function (while preserving the inexact bit that might be set on the entry to the function). The later will result mf_fpcr followed by a mt_fpcr to get and set the fpcr which will defeat the optimization itself. So the patch just remove the alpha optimized and rely on generic implementation. It fixes the math/test-*-{trunc} on alpha. [BZ #15479] [BZ #22666] * sysdeps/alpha/fpu/s_trunc.c: Remove file. * sysdeps/alpha/fpu/s_truncf.c: Likewise. [1] https://sourceware.org/ml/libc-alpha/2018-01/msg00114.html [2] https://www.star.bnl.gov/public/daq/HARDWARE/21264_data_sheet.pdf [3] https://sourceware.org/ml/libc-alpha/2018-01/msg00086.html Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2018-01-04alpha: Remove s_ceil{f} and s_floor{f} implementation (BZ#22665)Adhemerval Zanella
As discussed in libc-alpha [1], alpha ceil{f} and floor{f} implementation uses cvttq/svm and although the Alpha Architecture Handbook version 3 states that that CVTfi OUTPUT Exceptions (B.3 Mapping to IEEE Standard) should not generate Inexact if INE bit is set on fpcr, the Alpha 21264 [1] chip manual (A.8 IEEE Floating-Point Conformance) states that CVTfi and CVTif OUTPUT does generate inexact exception for inexact result regardless. As Joseph noted [2] to correctly fix it on alpha we need to either avoid the instruction or avoid any inexact bit from it being set on return from the function (while preserving the inexact bit that might be set on the entry to the function). The later will result mf_fpcr followed by a mt_fpcr to get and set the fpcr which will defeat the optimization itself. So the patch just remove the alpha optimized and rely on generic implementation. It fixes the math/test-*-{ceil,floor} on alpha. [BZ #15479] [BZ #22665] * sysdeps/alpha/fpu/s_ceil.c: Remove file. * sysdeps/alpha/fpu/s_ceilf.c: Likewise. * sysdeps/alpha/fpu/s_floor.c: Likewise. * sysdeps/alpha/fpu/s_floorf.c: Likewise. [1] https://www.star.bnl.gov/public/daq/HARDWARE/21264_data_sheet.pdf [2] https://sourceware.org/ml/libc-alpha/2018-01/msg00086.html Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2018-01-02Remove alpha specific fmax, fmin to fix sNaN handling [BZ #22660]Aurelien Jarno
Various fmax and fmin function implementations mishandle sNaN arguments: (a) When both arguments are NaNs, the return value should be a qNaN, but sometimes it is an sNaN if at least one argument is an sNaN. (b) Under TS 18661-1 semantics, if either argument is an sNaN then the result should be a qNaN (whereas if one argument is a qNaN and the other is not a NaN, the result should be the non-NaN argument). Various implementations treat sNaNs like qNaNs here. One way to fix that is to detect the sNaN and add a special case. That said there is no FPU instruction to do that, so it requires transfering the FP value to an integer register and testing bits. This becomes quite complicated so it's probably better to just use the generic versions of these functions which just do that through issignaling. Changelog: [BZ #22660] * sysdeps/alpha/fpu/s_fmax.S: Remove file. * sysdeps/alpha/fpu/s_fmaxf.S: Likewise. * sysdeps/alpha/fpu/s_fmin.S: Likewise. * sysdeps/alpha/fpu/s_fminf.S: Likewise.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-12-06Update Alpha libm-test-ulpsAdhemerval Zanella
* sysdeps/alpha/fpu/libm-test-ulps: Update. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-11-28Use libm_alias_float for alpha.Joseph Myers
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes alpha libm function implementations use libm_alias_float macros to define function aliases. In the case of the ABI compatibility for complex functions, libm_alias_float_other is used, with the cfloat_versions macro adjusted to take a function name argument without the trailing 'f' to facilitate this, and cfloat_versions dealing with calling libm_alias_float_other (except for clog10f, which doesn't use that macro because of the complexity associated with __clog10f also being exported). Tested with build-many-glibcs.py for alpha-linux-gnu that installed stripped shared libraries are unchanged by the patch. * sysdeps/alpha/fpu/cfloat-compat.h: Include <libm-alias-float.h>. (cfloat_versions): Take function argument without trailing 'f'. Call libm_alias_float_other. * sysdeps/alpha/fpu/cabsf.c: Update call to cfloat_versions. * sysdeps/alpha/fpu/cargf.c: Likewise. * sysdeps/alpha/fpu/cimagf.c: Likewise. * sysdeps/alpha/fpu/conjf.c: Likewise. * sysdeps/alpha/fpu/crealf.c: Likewise. * sysdeps/alpha/fpu/s_cacosf.c: Likewise. * sysdeps/alpha/fpu/s_cacoshf.c: Likewise. * sysdeps/alpha/fpu/s_casinf.c: Likewise. * sysdeps/alpha/fpu/s_casinhf.c: Likewise. * sysdeps/alpha/fpu/s_catanf.c: Likewise. * sysdeps/alpha/fpu/s_catanhf.c: Likewise. * sysdeps/alpha/fpu/s_ccosf.c: Likewise. * sysdeps/alpha/fpu/s_ccoshf.c: Likewise. * sysdeps/alpha/fpu/s_cexpf.c: Likewise. * sysdeps/alpha/fpu/s_clogf.c: Likewise. * sysdeps/alpha/fpu/s_cpowf.c: Likewise. * sysdeps/alpha/fpu/s_cprojf.c: Likewise. * sysdeps/alpha/fpu/s_csinf.c: Likewise. * sysdeps/alpha/fpu/s_csinhf.c: Likewise. * sysdeps/alpha/fpu/s_csqrtf.c: Likewise. * sysdeps/alpha/fpu/s_ctanf.c: Likewise. * sysdeps/alpha/fpu/s_ctanhf.c: Likewise. * sysdeps/alpha/fpu/s_clog10f.c: Include <libm-alias-float.h>. (clog10f): Use libm_alias_float_other. * sysdeps/alpha/fpu/s_ceilf.c: Include <libm-alias-float.h>. (ceilf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_copysignf.c: Include <libm-alias-float.h>. (copysignf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_fabsf.c: Include <libm-alias-float.h>. (fabsf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_floorf.c: Include <libm-alias-float.h>. (floorf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_lrintf.c: Include <libm-alias-float.h>. (lrintf): Define using libm_alias_float. (llrintf): Likewise. * sysdeps/alpha/fpu/s_lroundf.c: Include <libm-alias-float.h>. (lroundf): Define using libm_alias_float. (llroundf): Likewise. * sysdeps/alpha/fpu/s_rintf.c: Include <libm-alias-float.h>. (rintf): Define using libm_alias_float. * sysdeps/alpha/fpu/s_truncf.c: Include <libm-alias-float.h>. (truncf): Define using libm_alias_float.
2017-11-28Use libm_alias_double for alpha.Joseph Myers
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes alpha libm function implementations use libm_alias_double to define function aliases. This also simplifies the code because the compatibility for long double = double is handled by libm_alias_double instead of locally in each source file. Tested with build-many-glibcs.py for alpha-linux-gnu that installed stripped shared libraries are unchanged by the patch. * sysdeps/alpha/fpu/s_ceil.c: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/alpha/fpu/s_copysign.c: Include <libm-alias-double.h>. (copysign): Define using libm_alias_double. * sysdeps/alpha/fpu/s_fabs.c: Include <libm-alias-double.h>. (fabs): Define using libm_alias_double. * sysdeps/alpha/fpu/s_floor.c: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/alpha/fpu/s_lrint.c: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. (llrint): Likewise. * sysdeps/alpha/fpu/s_lround.c: Include <libm-alias-double.h>. (lround): Define using libm_alias_double. (llround): Likewise. * sysdeps/alpha/fpu/s_rint.c: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/alpha/fpu/s_trunc.c: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double.
2017-11-07nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}Adhemerval Zanella
This patch adds two new internal defines to set the internal pthread_mutex_t layout required by the supported ABIS: 1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define __nusers fields before or after __kind. The preferred value for is 0 for new ports and it sets __nusers before __kind. 2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and __list members will be place inside an union for linuxthreads compatibility. The preferred value is 0 for ports and it sets to not use an union to define both fields. It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32. Checked with a make check run-built-tests=no on all afected ABIs. [BZ #22298] * nptl/allocatestack.c (allocate_stack): Check if __PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if __PTHREAD_MUTEX_HAVE_PREV is defined. * nptl/descr.h (pthread): Likewise. * nptl/nptl-init.c (__pthread_initialize_minimal_internal): Likewise. * nptl/pthread_create.c (START_THREAD_DEFN): Likewise. * sysdeps/nptl/fork.c (__libc_fork): Likewise. * sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. (__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE for internal layout. (__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION instead of __WORDSIZE whether to use an union for __spins and __list fields. (__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION case. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New defines. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h (__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-11-07nptl: Add tests for internal pthread_mutex_t offsetsAdhemerval Zanella
This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-10-04Use libm_alias_double for dbl-64 fma.Joseph Myers
This patch makes dbl-64 fma use libm_alias_double. The ldbl-opt version is removed. The sparc32 version no longer needs to handle compat symbols, while alpha needs a new wrapper to avoid getting the ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps directories, so previously fma came from there). Tested for x86_64, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file. * sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include <math_ldbl_opt.h>. (fmal): Do not define as compat symbol here. * sysdeps/alpha/fpu/s_fma.c: New file.
2017-10-04Remove alpha nearbyint wrapper.Joseph Myers
Given my recent changes, sysdeps/alpha/fpu/s_nearbyint.c is no longer needed: it just includes the dbl-64/wordsize-64 version, which is the one that would be used anyway, and defines a compat symbol, duplicating the same compat symbol defined by the dbl-64/wordsize-64 version through use of libm_alias_double. Thus, this patch removes the redundant wrapper. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged for alpha. * sysdeps/alpha/fpu/s_nearbyint.c: Remove file.
2017-09-28Remove ancient __signbit inlinesWilco Dijkstra
Remove __signbit inlines from mathinline.h. Math.h already uses the builtin when supported, so additional inlines are only used on pre 4.0 GCCs. Similarly remove ancient copysign and fabs inlines. * sysdeps/alpha/fpu/bits/mathinline.h: Delete file. * sysdeps/ia64/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/coldfire/fpu/bits/mathinline.h: Delete file. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/powerpc/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/s390/fpu/bits/mathinline.h: (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove * sysdeps/sparc/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove. * sysdeps/tile/bits/mathinline.h: Delete file. * sysdeps/x86/fpu/bits/mathinline.h (__signbitf): Remove. (__signbit): Remove. (__signbitl): Remove.
2017-09-28Simplify C99 isgreater macrosWilco Dijkstra
Simplify the C99 isgreater macros. Although some support was added in GCC 2.97, not all targets added support until GCC 3.1. Therefore only use the builtins in math.h from GCC 3.1 onwards, and defer to generic macros otherwise. Improve the generic isunordered macro to use compares rather than call fpclassify twice - this is not only faster but also correct for signaling NaNs. * math/math.h: Improve handling of C99 isgreater macros. * sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise. * sysdeps/powerpc/bits/mathinline.h: Likewise. * sysdeps/sparc/fpu/bits/mathinline.h: Likewise. * sysdeps/x86/fpu/bits/mathinline.h: Likewise.
2017-09-01Obsolete pow10 functions.Joseph Myers
This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2017-08-20Remove sysdeps/alpha/bb_init_func.SH.J. Lu
Since the generic __bb_init_func has been removed by commit 7ed87317c7fb, there is no need for sysdeps/alpha/bb_init_func.S. [BZ #21974] * sysdeps/alpha/bb_init_func.S: Removed.
2017-07-27Update Alpha libm-test-ulpsAdhemerval Zanella
* sysdeps/alpha/fpu/libm-test-ulps: Update.
2017-06-14PowerPC64 ELFv2 PPC64_OPT_LOCALENTRYAlan Modra
ELFv2 functions with localentry:0 are those with a single entry point, ie. global entry == local entry, that have no requirement on r2 or r12 and guarantee r2 is unchanged on return. Such an external function can be called via the PLT without saving r2 or restoring it on return, avoiding a common load-hit-store for small functions. This patch implements the ld.so changes necessary for this optimization. ld.so needs to check that an optimized plt call sequence is in fact calling a function implemented with localentry:0, end emit a fatal error otherwise. The elf/testobj6.c change is to stop "error while loading shared libraries: expected localentry:0 `preload'" when running elf/preloadtest, which we'd get otherwise. * elf/elf.h (PPC64_OPT_LOCALENTRY): Define. * sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add refsym and sym parameters. Adjust callers. * sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New. (_dl_reloc_overflow): Increase buffser size. Formatting. * sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset): Delete reloc param, add refsym and sym. Check optimized plt call stubs for localentry:0 functions. Adjust callers. (elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym and sym parameters. Adjust callers. (_dl_reloc_overflow): Move attribute. (_dl_error_localentry): Declare. * elf/dl-runtime.c (_dl_fixup): Save original sym. Pass refsym and sym to elf_machine_fixup_plt. * elf/testobj6.c (preload): Call printf.
2017-06-06Optimize generic spinlock code and use C11 like atomic macros.Stefan Liebler
This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise.
2017-05-09Move shared pthread definitions to common headersAdhemerval Zanella
This patch removes all the replicated pthread definition accross the architectures and consolidates it on shared headers. The new organization is as follow: * Architecture specific definition (such as pthread types sizes) are place in the new pthreadtypes-arch.h header in arch specific path. * All shared structure definition are moved to a common NPTL header at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch specific one for internal definitions). * Also, for C11 future thread support, both mutex and condition definition are placed in a common header at sysdeps/nptl/bits/thread-shared-types.h. It is also a refactor patch without expected functional changes. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * posix/Makefile (headers): Add pthreadtypes-arch.h and thread-shared-types.h. * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch specific thread definition. * sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/nptl/bits/thread-shared-types.h: New file: shared thread definition between POSIX and C11. * sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file. * sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise. * sysdeps/nptl/bits/pthreadtypes.h: New file: common thread definitions shared across all architectures.
2017-04-26Add earlyclobber to sqrtt/sqrtf insns.Uros Bizjak
When using software completions, we have to prevent assembler to match input and output operands of sqrtt/sqrtf insn. Add earlyclobber to output operand to avoid unwanted operand matching. 2017-04-14 Uros Bizjak <ubizjak@gmail.com> * sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Add earlyclobber to output operand of sqrt insn. (__ieee754_sqrtf): Ditto.
2017-04-10Consolidate pthreadtype.h placementConsolidate pthreadtype.h placementAdhemerval Zanella
This patch moves all arch specific pthreadtypes.h to a similar path for all architectures (sysdeps/unix/sysv/<arch>/bits). No functional or build change is expected. The idea is mainly to organize the header placement for all architectures. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, tile{pro,gx}-linux-gnu, and x86_64-linux-gnu). * sysdeps/unix/sysv/linux/x86/Implies: New file. * sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h: Move to ... * sysdeps/alpha/nptl/bits/pthreadtypes.h: ... here. * sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Move to ... * sysdeps/powerpc/nptl/bits/pthreadtypes.h: ... here. * sysdeps/x86/bits/pthreadtypes.h: Move to ... * sysdeps/x86/nptl/bits/pthreadtypes.h: ... here.
2017-03-14Remove _dl_platform_stringAndreas Schwab
There are no non-trivial uses of _dl_platform_string.
2017-02-01alpha: Use saturating arithmetic in memchrRichard Henderson
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2016-12-14Refactor long double information into bits/long-double.h.Joseph Myers
Information about whether the ABI of long double is the same as that of double is split between bits/mathdef.h and bits/wordsize.h. When the ABIs are the same, bits/mathdef.h defines __NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc binary supports both -mlong-double-64 and -mlong-double-128, bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with __NO_LONG_DOUBLE_MATH if this particular compilation is with -mlong-double-64. As part of the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this patch puts all that information in a single header, bits/long-double.h. It is included from sys/cdefs.h alongside the include of bits/wordsize.h, so other headers generally do not need to include bits/long-double.h directly. Previously, various bits/mathdef.h headers and bits/wordsize.h headers had this long double information (including implicitly in some bits/mathdef.h headers through not having the defines present in the default version). After the patch, it's all in six bits/long-double.h headers. Furthermore, most of those new headers are not architecture-specific. Architectures with optional long double all use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128, ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header for the case where long double = double, and headers in ldbl-128, ldbl-96 and ldbl-opt, suffices to cover every architecture except for cases where long double properties vary between different ABIs sharing a set of installed headers; fortunately all the ldbl-opt cases share a single compiler-predefined macro __LONG_DOUBLE_128__ that can be used to tell whether this compilation is -mlong-double-64 or -mlong-double-128. The two cases where a set of headers is shared between ABIs with different long double properties, MIPS (o32 has long double = double, other ABIs use ldbl-128) and SPARC (32-bit has optional long double, 64-bit has required long double), need their own bits/long-double.h headers. As with bits/wordsize.h, multiple-include protection for this header is generally implicit through the include guards on sys/cdefs.h, and multiple inclusion is harmless in any case. There is one subtlety: the header must not define __LONG_DOUBLE_MATH_OPTIONAL if __NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines __NO_LONG_DOUBLE_MATH itself before including system headers. Subject to keeping that working, it would be reasonable to move these macros from defined/undefined #ifdef to always-defined 1/0 #if semantics, but this patch does not attempt to do so, just rearranges where the macros are defined. After this patch, the only use of bits/mathdef.h is the alpha one for modifying complex function ABIs for old GCC. Thus, all versions of the header other than the default and alpha versions are removed, as is the include from math.h. Tested for x86_64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/long-double.h: New file. * sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise. * sysdeps/mips/bits/long-double.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise. * math/Makefile (headers): Add bits/long-double.h. * misc/sys/cdefs.h: Include <bits/long-double.h>. * stdlib/strtold.c: Include <bits/long-double.h> instead of <bits/wordsize.h>. * bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. [!__NO_LONG_DOUBLE_MATH]: Remove conditional code. * math/math.h: Do not include <bits/mathdef.h>. * sysdeps/aarch64/bits/mathdef.h: Remove file. * sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. * sysdeps/ia64/bits/mathdef.h: Remove file. * sysdeps/m68k/m680x0/bits/mathdef.h: Likewise. * sysdeps/mips/bits/mathdef.h: Likewise. * sysdeps/powerpc/bits/mathdef.h: Likewise. * sysdeps/s390/bits/mathdef.h: Likewise. * sysdeps/sparc/bits/mathdef.h: Likewise. * sysdeps/x86/bits/mathdef.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove conditional code. * sysdeps/s390/s390-64/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise.
2016-12-01Add missing hidden_def (__sigsetjmp).Joseph Myers
This patch adds the missing hidden_def (__sigsetjmp) on various architectures that were failing to build (as noted in <https://sourceware.org/ml/libc-alpha/2016-11/msg01124.html>). Tested (compilation only) with build-many-glibcs.py. * sysdeps/alpha/setjmp.S (__sigsetjmp): Use hidden_def. * sysdeps/hppa/setjmp.S (__sigsetjmp): Likewise. * sysdeps/mips/mips64/setjmp.S (__sigsetjmp): Likewise. * sysdeps/mips/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sh/sh3/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sh/sh4/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sparc/sparc32/setjmp.S (__sigsetjmp): Likewise. * sysdeps/tile/setjmp.S (__sigsetjmp): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/setjmp.S (__sigsetjmp): Likewise.
2016-12-01Refactor FP_ILOGB* out of bits/mathdef.h.Joseph Myers
Continuing the refactoring of bits/mathdef.h, this patch stops it defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to a new header bits/fp-logb.h. There are only two possible values of each of those macros permitted by ISO C. TS 18661-1 adds corresponding macros for llogb, and their values are required to correspond to those of the ilogb macros in the obvious way. Thus two boolean values - for which the same choices are correct for most architectures - suffice to determine the value of all these macros, and by defining macros for those boolean values in bits/fp-logb.h we can then define the public FP_* macros in math.h and avoid the present duplication of the associated feature test macro logic. This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and __FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct for both architectures, while ia64, m68k and x86 get their own versions of bits/fp-logb.h to reflect their use of values different from the defaults. The patch renders many copies of bits/mathdef.h trivial (needed only to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise <https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html> accordingly so that it removes all bits/mathdef.h headers except the default one and the alpha one, and arranges for the header to be included only by complex.h as the only remaining use at that point will be for the alpha ABI issues there. Tested for x86_64 and x86. Also did compile-only testing with build-many-glibcs.py (using glibc sources from before the commit that introduced many build failures with undefined __GI___sigsetjmp). * bits/fp-logb.h: New file. * sysdeps/ia64/bits/fp-logb.h: Likewise. * sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise. * sysdeps/x86/bits/fp-logb.h: Likewise. * math/Makefile (headers): Add bits/fp-logb.h. * math/math.h: Include <bits/fp-logb.h>. [__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN. [__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN. * bits/mathdef.h (FP_ILOGB0): Remove. (FP_ILOGBNAN): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise.
2016-11-24Remove cached PID/TID in cloneAdhemerval Zanella
This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
2016-11-24Refactor float_t, double_t information into bits/flt-eval-method.h.Joseph Myers
At present, definitions of float_t and double_t are split among many bits/mathdef.h headers. For all but three architectures, these types are float and double. Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that provides a more generic way of determining the correct values of these typedefs. Defining these typedefs more generally based on __FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in <https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>. This patch refactors things in the way I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new header bits/flt-eval-method.h defines a single macro, __GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define float_t and double_t. The default is based on __FLT_EVAL_METHOD__ (although actually a default to 0 would have the same effect for current ports, because ports where values other than 0 or 16 are possible all have their own headers). To avoid changing the existing semantics in any case, including for compilers not defining __FLT_EVAL_METHOD__, architecture-specific files are then added for m68k, s390, x86 which replicate the existing semantics. At least with __FLT_EVAL_METHOD__ values possible with GCC, there should be no change to the choices of float_t and double_t for any supported configuration. Architecture maintainer notes: * m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It might make sense to make the header prefer to base things on __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make the choices of these types more accurate (with a NEWS entry as for the other changes to these types on particular architectures). * s390: sysdeps/s390/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As previously discussed, it might make sense in coordination with GCC to eliminate the historic mistake, avoid excess precision in the -fexcess-precision=standard case and make the typedefs match (with a NEWS entry, again). Tested for x86-64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/flt-eval-method.h: New file. * sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise. * sysdeps/s390/bits/flt-eval-method.h: Likewise. * sysdeps/x86/bits/flt-eval-method.h: Likewise. * math/Makefile (headers): Add bits/flt-eval-method.h. * math/math.h: Include <bits/flt-eval-method.h>. [__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD. [__USE_ISOC99] (double_t): Likewise. * bits/mathdef.h (float_t): Remove. (double_t): Likewise. * sysdeps/aarch64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/alpha/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/arm/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/ia64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/mips/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/powerpc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/s390/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sparc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/tile/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/x86/bits/mathdef.h (float_t): Likewise. (double_t): Likewise.
2016-11-04Fix alpha sqrt fegetenv namespace (bug 20768).Joseph Myers
On alpha, sqrt (a C90 function) brings in references to fegetenv (C99), resulting in linknamespace test failures: [initial] __sqrt -> [libm.a(w_sqrt.o)] __ieee754_sqrt -> [libm.a(e_sqrt.o)] __feholdexcept -> [libm.a(feholdexcpt.o)] fegetenv This patch fixes this by making __feholdexcept call __fegetenv instead of fegetenv. Tested for Alpha (compilation only). [BZ #20768] * sysdeps/alpha/fpu/feholdexcpt.c (__feholdexcept): Call __fegetenv instead of fegetenv.
2016-11-04Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).Joseph Myers
manual/libm-err-tab.pl hardcodes a list of names for particular platforms (mapping from sysdeps directory name to friendly name for the manual). This goes against the principle of keeping information about individual platforms in their corresponding sysdeps directory, and the list is also very out-of-date regarding supported platforms and their corresponding sysdeps directories. This patch fixes this by adding a libm-test-ulps-name file alongside each libm-test-ulps file. The script then gets the friendly name from that file, which is required to exist, so it no longer needs to allow for the mapping being missing. Tested for x86_64. [BZ #14139] * manual/libm-err-tab.pl (%pplatforms): Initialize to empty. (find_files): Obtain platform name from libm-test-ulps-name and store in %pplatforms. (canonicalize_platform): Remove. (print_platforms): Use $pplatforms directly. (by_platforms): Do not allow for platforms missing from %pplatforms. * sysdeps/aarch64/libm-test-ulps-name: New file. * sysdeps/alpha/fpu/libm-test-ulps-name: Likewise. * sysdeps/arm/libm-test-ulps-name: Likewise. * sysdeps/generic/libm-test-ulps-name: Likewise. * sysdeps/hppa/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/fpu/libm-test-ulps-name: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise. * sysdeps/ia64/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise. * sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise. * sysdeps/microblaze/libm-test-ulps-name: Likewise. * sysdeps/mips/mips32/libm-test-ulps-name: Likewise. * sysdeps/mips/mips64/libm-test-ulps-name: Likewise. * sysdeps/nios2/libm-test-ulps-name: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise. * sysdeps/s390/fpu/libm-test-ulps-name: Likewise. * sysdeps/sh/libm-test-ulps-name: Likewise. * sysdeps/sparc/fpu/libm-test-ulps-name: Likewise. * sysdeps/tile/libm-test-ulps-name: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
2016-09-07Add femode_t functions: alpha.Joseph Myers
This patch adds Alpha versions of fegetmode and fesetmode. Untested. * sysdeps/alpha/fpu/fegetmode.c: New file. * sysdeps/alpha/fpu/fesetmode.c: Likewise.
2016-09-07Add femode_t functions.Joseph Myers
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-08-29Convert remaining complex function to generated filesPaul E. Murphy
Convert cpow, clog, clog10, cexp, csqrt, and cproj functions into generated templates. Note, ldbl-opt still retains s_clog10l.c as the aliasing rules are non-trivial.
2016-08-19Convert _Complex tangent functions to generated codePaul E. Murphy
This converts s_c{,a}tan{,h}{f,,l} into a single templated file c{,a}tan{,h}_template.c with the exception of alpha.
2016-08-19Convert _Complex sine functions to generated codePaul E. Murphy
Refactor s_c{,a}sin{,h}{f,,l} into a single templated macro.
2016-08-19Convert _Complex cosine functions to generated codePaul E. Murphy
This is fairly straight fowards. m68k overrides are updated to use the framework, and thus are simplified a bit.
2016-08-16Add fesetexcept: alpha.Joseph Myers
This patch adds an Alpha version of fesetexcept. Untested. * sysdeps/alpha/fpu/fesetexcept.c: New file.
2016-08-02alpha: fix trunc for big input valuesAurelien Jarno
The alpha specific version of trunc and truncf always add and subtract 0x1.0p23 or 0x1.0p52 even for big values. This causes this kind of errors in the testsuite: Failure: Test: trunc_towardzero (0x1p107) Result: is: 1.6225927682921334e+32 0x1.fffffffffffffp+106 should be: 1.6225927682921336e+32 0x1.0000000000000p+107 difference: 1.8014398509481984e+16 0x1.0000000000000p+54 ulp : 0.5000 max.ulp : 0.0000 Change this by returning the input value when its absolute value is greater than 0x1.0p23 or 0x1.0p52. NaN have to go through the add and subtract operations to get possibly silenced. Finally remove the code to handle inexact exception, trunc should never generate such an exception. Changelog: * sysdeps/alpha/fpu/s_trunc.c (__trunc): Return the input value when its absolute value is greater than 0x1.0p52. [_IEEE_FP_INEXACT] Remove. * sysdeps/alpha/fpu/s_truncf.c (__truncf): Return the input value when its absolute value is greater than 0x1.0p23. [_IEEE_FP_INEXACT] Remove.
2016-08-02alpha: fix rint on sNaN inputAurelien Jarno
The alpha version of rint wrongly return sNaN for sNaN input. Fix that by checking for NaN and by returning the input value added with itself in that case. Changelog: * sysdeps/alpha/fpu/s_rint.c (__rint): Add argument with itself when it is a NaN. * sysdeps/alpha/fpu/s_rintf.c (__rintf): Likewise.
2016-08-02alpha: fix floor on sNaN inputAurelien Jarno
The alpha version of floor wrongly return sNaN for sNaN input. Fix that by checking for NaN and by returning the input value added with itself in that case. Finally remove the code to handle inexact exception, floor should never generate such an exception. Changelog: * sysdeps/alpha/fpu/s_floor.c (__floor): Add argument with itself when it is a NaN. [_IEEE_FP_INEXACT] Remove. * sysdeps/alpha/fpu/s_floorf.c (__floorf): Likewise.
2016-08-02alpha: fix ceil on sNaN inputAurelien Jarno
The alpha version of ceil wrongly return sNaN for sNaN input. Fix that by checking for NaN and by returning the input value added with itself in that case. Finally remove the code to handle inexact exception, ceil should never generate such an exception. Changelog: * sysdeps/alpha/fpu/s_ceil.c (__ceil): Add argument with itself when it is a NaN. [_IEEE_FP_INEXACT] Remove. * sysdeps/alpha/fpu/s_ceilf.c (__ceilf): Likewise.
2016-06-24Remove atomic_compare_and_exchange_bool_rel.Torvald Riegel
atomic_compare_and_exchange_bool_rel and catomic_compare_and_exchange_bool_rel are removed and replaced with the new C11-like atomic_compare_exchange_weak_release. The concurrent code in nscd/cache.c has not been reviewed yet, so this patch does not add detailed comments. * nscd/cache.c (cache_add): Use new C11-like atomic operation instead of atomic_compare_and_exchange_bool_rel. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * include/atomic.h (atomic_compare_and_exchange_bool_rel, catomic_compare_and_exchange_bool_rel): Remove. * sysdeps/aarch64/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/alpha/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/arm/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/mips/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/tile/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise.
2016-06-20elf: Consolidate machine-agnostic DTV definitions in <dl-dtv.h>Florian Weimer
Identical definitions of dtv_t and TLS_DTV_UNALLOCATED were repeated for all architectures using DTVs.
2016-01-25Update Alpha libm-test-ulpsRichard Henderson
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers
2015-09-11Move bits/atomic.h to atomic-machine.h (bug 14912).Joseph Myers
It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/atomic.h to atomic-machine.h to follow that convention. This is the only change in this series that needs to change the filename rather than simply removing a directory level (because both atomic.h and bits/atomic.h exist at present). Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * sysdeps/aarch64/bits/atomic.h: Move to ... * sysdeps/aarch64/atomic-machine.h: ...here. (_AARCH64_BITS_ATOMIC_H): Rename macro to _AARCH64_ATOMIC_MACHINE_H. * sysdeps/alpha/bits/atomic.h: Move to ... * sysdeps/alpha/atomic-machine.h: ...here. * sysdeps/arm/bits/atomic.h: Move to ... * sysdeps/arm/atomic-machine.h: ...here. Update comments. * bits/atomic.h: Move to ... * sysdeps/generic/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/i386/bits/atomic.h: Move to ... * sysdeps/i386/atomic-machine.h: ...here. * sysdeps/ia64/bits/atomic.h: Move to ... * sysdeps/ia64/atomic-machine.h: ...here. * sysdeps/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ... * sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here. * sysdeps/microblaze/bits/atomic.h: Move to ... * sysdeps/microblaze/atomic-machine.h: ...here. * sysdeps/mips/bits/atomic.h: Move to ... * sysdeps/mips/atomic-machine.h: ...here. (_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H. * sysdeps/powerpc/bits/atomic.h: Move to ... * sysdeps/powerpc/atomic-machine.h: ...here. Update comments. * sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update comments. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/s390/bits/atomic.h: Move to ... * sysdeps/s390/atomic-machine.h: ...here. * sysdeps/sparc/sparc32/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here. * sysdeps/sparc/sparc64/bits/atomic.h: Move to ... * sysdeps/sparc/sparc64/atomic-machine.h: ...here. * sysdeps/tile/bits/atomic.h: Move to ... * sysdeps/tile/atomic-machine.h: ...here. * sysdeps/tile/tilegx/bits/atomic.h: Move to ... * sysdeps/tile/tilegx/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/tile/tilepro/bits/atomic.h: Move to ... * sysdeps/tile/tilepro/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include <sysdeps/arm/atomic-machine.h> instead of <sysdeps/arm/bits/atomic.h>. * sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here. (_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here. * sysdeps/x86_64/bits/atomic.h: Move to ... * sysdeps/x86_64/atomic-machine.h: ...here. * include/atomic.h: Include <atomic-machine.h> instead of <bits/atomic.h>.
2015-05-19alpha: Update libm-test-ulpsRichard Henderson
2015-04-06alpha: Update libm-test-ulpsRichard Henderson
Regenerated from scratch.