| Age | Commit message (Collapse) | Author |
|---|
|
To enable building glibc with branch protection, assembly code
needs BTI landing pads and ELF object file markings in the form
of a GNU property note.
The landing pads are unconditionally added to all functions that
may be indirectly called. When the code segment is not mapped
with PROT_BTI these instructions are nops. They are kept in the
code when BTI is not supported so that the layout of performance
critical code is unchanged across configurations.
The GNU property notes are only added when there is support for
BTI in the toolchain, because old binutils does not handle the
notes right. (Does not know how to merge them nor to put them in
PT_GNU_PROPERTY segment instead of PT_NOTE, and some versions
of binutils emit warnings about the unknown GNU property. In
such cases the produced libc binaries would not have valid
ELF marking so BTI would not be enabled.)
Note: functions using ENTRY or ENTRY_ALIGN now start with an
additional BTI c, so alignment of the following code changes,
but ENTRY_ALIGN_AND_PAD was fixed so there is no change to the
existing code layout. Some string functions may need to be
tuned for optimal performance after this commit.
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
In the static pie enabled libc, crt1.o uses the same position independent
code as rcrt1.o and crt1.o is used instead of Scrt1.o when -no-pie
executables are linked. When main is not defined in the executable, but
in a shared library crt1.o is currently broken, it assumes main is local.
(glibc has a test for this but i missed it in my previous testing.)
To make both rcrt1.o and crt1.o happy with the same code, a wrapper is
introduced around main: with this crt1.o works with extern main symbol
while rcrt1.o does not depend on GOT relocations. (The change only
affects static pie enabled libc. Further simplification of start.S is
possible in the future by using the same approach for Scrt1.o too.)
* aarch64/start.S (_start): Use __wrap_main.
(__wrap_main): New local symbol.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
There are three flavors of the crt startup code:
1) crt1.o used for non-pie,
2) Scrt1.o used for dynamic linked pie (dynamic linker relocates),
3) rcrt1.o used for static linked pie (self relocation is needed)
In the --enable-static-pie case crt1.o is built with -DPIC and in case
of static linking it interposes _dl_relocate_static_pie in libc to
avoid self relocation.
Scrt1.o is built with -DPIC -DSHARED and it relies on GOT entries that
the static linker cannot relax and thus need relocation before the
start code is executed, so rcrt1.o needs separate implementation.
This implementation does not work for .text > 4G position independent
executables, which is fine since the toolchain does not support
-mcmodel=large with -fPIE.
Tests pass with ld/22269 and ld/22263 binutils bugs fixed.
* sysdeps/aarch64/start.S (_start): Handle PIC && !SHARED case.
|
|
eXecute-Only Memory (XOM) is a protection mechanism against some ROP
attacks. XOM sets the code as executable and unreadable, so the access
to any data, like literal pools, in the code section causes the fault
with XOM. The compiler can disable literal pools for C source files,
but not for assembly files, so I use movz/movk instead of literal pools
in start.S for XOM.
I add MOVL macro with movz/movk instructions like movl pseudo-instruction
in armasm, and use the macro instead of literal pools.
* sysdeps/aarch64/start.S: Use MOVL instead of literal pools.
* sysdeps/aarch64/sysdep.h (MOVL): Add MOVL macro.
|
|
|
|
* sysdeps/aarch64/crti.S: Add include of sysdep.h.
(call_weak_fn): Use PTR_REG to get correct reg name in ILP32.
* sysdeps/aarch64/dl-irel.h: Add include of sysdep.h.
(elf_irela): Use AARCH64_R macro to get correct relocation in ILP32.
* sysdeps/aarch64/dl-machine.h: Add include of sysdep.h.
(elf_machine_load_address, RTLD_START, RTLD_START_1, RTLD_START,
elf_machine_type_class, ELF_MACHINE_JMP_SLOT, elf_machine_rela,
elf_machine_lazy_rel): Add ifdef's for ILP32 support.
* sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return,
_dl_tlsdesc_return_lazy, _dl_tlsdesc_dynamic,
_dl_tlsdesc_resolve_hold): Extend pointers in ILP32, use PTR_REG
to get correct reg name for ILP32.
* sysdeps/aarch64/dl-trampoline.S (ip01): New Macro.
(RELA_SIZE): New Macro.
(_dl_runtime_resolve, _dl_runtime_profile): Use new macros and PTR_REG
to support ILP32.
* sysdeps/aarch64/jmpbuf-unwind.h (_JMPBUF_CFA_UNWINDS_ADJ): Add
cast for ILP32 mode.
* sysdeps/aarch64/memcmp.S (memcmp): Extend arg pointers for ILP32 mode.
* sysdeps/aarch64/memcpy.S (memmove, memcpy): Ditto.
* sysdeps/aarch64/memset.S (__memset): Ditto.
* sysdeps/aarch64/strchr.S (strchr): Ditto.
* sysdeps/aarch64/strchrnul.S (__strchrnul): Ditto.
* sysdeps/aarch64/strcmp.S (strcmp): Ditto.
* sysdeps/aarch64/strcpy.S (strcpy): Ditto.
* sysdeps/aarch64/strlen.S (__strlen): Ditto.
* sysdeps/aarch64/strncmp.S (strncmp): Ditto.
* sysdeps/aarch64/strnlen.S (strnlen): Ditto.
* sysdeps/aarch64/strrchr.S (strrchr): Ditto.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Ditto.
* sysdeps/unix/sysv/linux/aarch64/setcontext.S (__setcontext): Ditto.
* sysdeps/unix/sysv/linux/aarch64/swapcontext.S (__swapcontext): Ditto.
* sysdeps/aarch64/__longjmp.S (__longjmp): Extend pointers in ILP32,
change PTR_MANGLE call to use register numbers instead of names.
* sysdeps/unix/sysv/linux/aarch64/getcontext.S (__getcontext): Ditto.
* sysdeps/aarch64/setjmp.S (__sigsetjmp): Extend arg pointers for
ILP32 mode, change PTR_MANGLE calls to use register numbers.
* sysdeps/aarch64/start.S (_start): Ditto.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h
(__PTHREAD_RWLOCK_INT_FLAGS_SHARED): New define.
(__SIZEOF_PTHREAD_ATTR_T, __SIZEOF_PTHREAD_MUTEX_T,
__SIZEOF_PTHREAD_MUTEXATTR_T, __SIZEOF_PTHREAD_COND_T,
__SIZEOF_PTHREAD_COND_COMPAT_T, __SIZEOF_PTHREAD_CONDATTR_T,
__SIZEOF_PTHREAD_RWLOCK_T, __SIZEOF_PTHREAD_RWLOCKATTR_T,
__SIZEOF_PTHREAD_BARRIER_T, __SIZEOF_PTHREAD_BARRIERATTR_T):
Make defined values dependent on __ILP32__.
* sysdeps/aarch64/nptl/bits/semaphore.h (__SIZEOF_SEM_T): Change define.
(sem_t): Change __align type.
* sysdeps/aarch64/sysdep.h (AARCH64_R, PTR_REG, PTR_LOG_SIZE, DELOUSE,
PTR_SIZE): New Macros.
(LDST_PCREL, LDST_GLOBAL) Update to use PTR_REG.
* sysdeps/unix/sysv/linux/aarch64/bits/fcntl.h (O_LARGEFILE):
Set when in ILP32 mode.
(F_GETLK64, F_SETLK64, F_SETLKW64): Only set in LP64 mode.
* sysdeps/unix/sysv/linux/aarch64/dl-cache.h (DL_CACHE_DEFAULT_ID):
Set elf flags for ILP32.
(add_system_dir): Set ILP32 library directories.
* sysdeps/unix/sysv/linux/aarch64/init-first.c
(_libc_vdso_platform_setup): Set minimum kernel version for ILP32.
* sysdeps/unix/sysv/linux/aarch64/ldconfig.h
(SYSDEP_KNOWN_INTERPRETER_NAMES): Add ILP32 names.
* sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (GET_PC, SET_PC):
New Macros.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Handle ILP32 pointers.
|
|
|
|
|
|
|
|
This patch moves the AArch64 port to the main sysdeps hierarchy. The
move is essentially:
git mv ports/sysdeps/aarch64 sysdeps/aarch64
git mv ports/sysdeps/unix/sysv/linux/aarch64 sysdeps/unix/sysv/linux/aarch64
The README is updated and I've updated ChangeLog.aarch64 along the
lines of the ARM move. The AArch64 build has been tested to confirm
that there were no changes in objdump -dr output or the shared
objects.
|
