| Age | Commit message (Collapse) | Author |
|---|
|
[BZ #16885]
* sysdeps/sparc/sparc64/strcmp.S: Fix end comparison handling when
multiple zero bytes exist at the end of a string.
Reported by Aurelien Jarno <aurelien@aurel32.net>
* string/test-strcmp.c (check): Add explicit test for situations where
there are multiple zero bytes after the first.
|
|
Clean up string functions that do not have a version in gnulib on
the assumption that glibc is the canonical upstream copy of this
code. basename has a copy in gnulib but it is largely written to
handle Windows paths so merging it is not really viable. The changes
mostly consist of switching to ANSI function prototypes and removing
unused includes.
As many of these functions do not get built in a typical build due
to architecture optimized versions being used instead I built these
by hand to verify there were no build warnings and the code was
identical.
2014-04-07 Will Newton <will.newton@linaro.org>
* string/basename.c [HAVE_CONFIG_H]: Remove #ifdef and
and contents. [!_LIBC] Remove #ifndef and contents.
(basename): Use ANSI prototype. [_LIBC] Remove #idef.
* string/memccpy.c (__memccpy): Use ANSI prototype.
* string/memfrob.c (memfrob): Likewise.
* string/strcoll.c (STRCOLL): Likewise.
* string/strlen.c (strlen): Likewise.
* string/strtok.c (STRTOK): Likewise.
* string/strcat.c: Remove unused #include of memcopy.h.
(strcat): Use ANSI prototype.
* string/strchr.c: Remove unused #include of memcopy.h.
(strchr): Use ANSI prototype.
* string/strcmp.c: Remove unused #include of memcopy.h.
(strcmp): Use ANSI prototype.
* string/strcpy.c: Remove unused #include of memcopy.h.
(strcpy): Use ANSI prototype.
|
|
This patch add an optimized strpbrk for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance on
the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and memory
clear using VSX instructions.
|
|
This patch add a optimized strcspn for POWER7 by using a different
algorithm than default implementation: it constructs a table based on
the 'accept' argument and use this table to check for any occurance
on the input string. The idea is similar as x86_64 uses.
For PowerPC some tunings were added, such as unroll loops and align
stack memory to table to 16 bytes (so VSX clean can ran without
alignment issues).
|
|
The optimization is achieved by following techniques:
> hashing of needle.
> hashing avoids scanning of duplicate entries in needle across the string.
> initializing the hash table with Vector instructions (VSX) by quadword access.
> unrolling when scanning for character in string across hash table.
|
|
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
|
|
This patch optimizes strrchr() for ppc64. It uses aligned memory
access along with cmpb instruction and CPU prefetch to avoid
cache misses for speed improvement.
|
|
We include a generic version of strtok to result which could be faster
when underlying primitives are better optimized than current version.
|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules. This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.
Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.
Tested x86_64.
* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
($(objpfx)check-local-headers.out): Likewise.
($(objpfx)begin-end-check.out): Likewise.
* Makerules (check-abi-%.out): Likewise.
* catgets/Makefile ($(objpfx)test1.cat): Likewise.
($(objpfx)test2.cat): Likewise.
($(objpfx)de/libc.cat): Likewise.
($(objpfx)test-gencat.out): Likewise.
* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-pathopt.out): Likewise.
($(objpfx)tst-rtld-load-self.out): Likewise.
($(objpfx)tst-array1-cmp.out): Likewise.
($(objpfx)tst-array1-static-cmp.out): Likewise.
($(objpfx)tst-array2-cmp.out): Likewise.
($(objpfx)tst-array3-cmp.out): Likewise.
($(objpfx)tst-array4-cmp.out): Likewise.
($(objpfx)tst-array5-cmp.out): Likewise.
($(objpfx)tst-array5-static-cmp.out): Likewise.
($(objpfx)check-textrel.out): Likewise.
($(objpfx)check-execstack.out): Likewise.
($(objpfx)check-localplt.out): Likewise.
($(objpfx)order2-cmp.out): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem): Likewise.
($(objpfx)tst-initorder-cmp.out): Likewise.
($(objpfx)tst-initorder2-cmp.out): Likewise.
($(objpfx)tst-unused-dep.out): Likewise.
($(objpfx)tst-unused-dep-cmp.out): Likewise.
* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
* iconv/Makefile (test-iconvconfig): Likewise.
* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
($(objpfx)iconv-test.out): Likewise.
($(objpfx)tst-tables.out): Likewise.
* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
($(objpfx)tst-gettext.out): Likewise.
($(objpfx)tst-translit.out): Likewise.
($(objpfx)tst-gettext2.out): Likewise.
($(objpfx)tst-gettext4.out): Likewise.
($(objpfx)tst-gettext6.out): Likewise.
* io/Makefile ($(objpfx)ftwtest.out): Likewise.
* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
($(objpfx)tst-fopenloc-cmp.out): Likewise.
($(objpfx)tst-fopenloc-mem.out): Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
* posix/Makefile ($(objpfx)globtest.out): Likewise.
($(objpfx)wordexp-tst.out): Likewise.
($(objpfx)annexc.out): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)tst-getconf.out): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
($(objpfx)tst-printf.out): Likewise.
($(objpfx)tst-setvbuf1.out): Likewise.
($(objpfx)tst-setvbuf1-cmp.out): Likewise.
* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
($(objpfx)tst-fmtmsg.out): Likewise.
* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.
localedata:
* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
($(objpfx)tst-fmon.out): Likewise.
($(objpfx)tst-numeric.out): Likewise.
($(objpfx)tst-locale.out): Likewise.
($(objpfx)tst-rpmatch.out): Likewise.
($(objpfx)tst-trans.out): Likewise.
($(objpfx)tst-mbswcs.out): Likewise.
($(objpfx)tst-ctype.out): Likewise.
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
nptl:
* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
($(objpfx)tst-tls6.out): Likewise.
($(objpfx)tst-cleanup0.out): Likewise.
($(objpfx)tst-cleanup0-cmp.out): Likewise.
($(objpfx)tst-cancel-wrappers.out): Likewise.
($(objpfx)tst-oddstacklimit.out): Likewise.
nptl_db:
* Makefile ($(objpfx)db-symbols.out): Use
$(evaluate-test).
|
|
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):
* #endif conditionals that referred to BSD or SVID are updated.
* Redundant __USE_* tests in cases involving __USE_MISC are removed.
This includes cases such as __USE_MISC || __USE_ISOC99, where
__USE_MISC is redundant (because __USE_MISC is only ever defined in
the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
is also defined; the same applies to the non-XSI-extended POSIX
versions), and cases involving __USE_GNU, where __USE_GNU is
redundant (because if __USE_GNU is defined, so are the other __USE_*
macros). There may well be other cases of __USE_FOO || __USE_BAR
tests that could be simplified because one macro implies the other;
this patch only addresses cases involving __USE_MISC.
Tested x86_64.
* bits/fcntl.h [__USE_MISC]: Remove redundant conditionals.
* bits/sigaction.h [__USE_MISC]: Likewise.
* bits/waitstatus.h: Update #endif comments.
* ctype/ctype.h: Likewise.
* dirent/dirent.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
* grp/grp.h: Update #endif comments.
[__USE_GNU]: Remove redundant conditionals.
[__USE_MISC]: Likewise.
* inet/netinet/in.h [__USE_GNU]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise.
* libio/bits/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* libio/bits/stdio2.h [__USE_MISC]: Likewise.
* libio/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* math/bits/math-finite.h [__USE_MISC]: Likewise.
* math/bits/mathcalls.h [__USE_MISC]: Likewise.
* math/math.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* misc/sys/uio.h: Update #endif comments.
* posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals.
* posix/glob.h [__USE_MISC]: Likewise.
* posix/sys/types.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/sys/wait.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/unistd.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* pwd/pwd.h [__USE_GNU]: Likewise.
[__USE_MISC]: Likewise.
* resolv/netdb.h [__USE_GNU]: Likewise.
* signal/signal.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* stdlib/stdlib.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
[__USE_GNU]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]:
Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif
comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/x86/bits/string.h: Update #endif comments.
* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant
conditionals.
* time/sys/time.h: Update #endif comments.
* time/time.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
|
|
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
|
|
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
|
|
This patch cleans up following the obsoletion of _BSD_SOURCE and
_SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC.
The only non-mechanical part of this patch is the changes to
features.h; everything else is simple substitution of __USE_MISC for
the old macros. Thus, this patch leaves obviously redundant
conditionals such as "defined __USE_MISC || defined __USE_MISC", and
does not update #endif comments where they referred to BSD or SVID in
words instead of the literal macro name. This is intended to
facilitate patch review by separating the less mechanical changes from
these purely mechanical changes into a separate patch. (I do intend
to integrate all the changes from
<https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I
believe includes all the trailing comment updates, in subsequent
patches.)
Tested x86_64.
* include/features.h (__USE_BSD): Remove macro definitions.
(__USE_SVID): Likewise.
(_BSD_SOURCE): Likewise.
(_SVID_SOURCE): Likewise.
[!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition
from definition of _DEFAULT_SOURCE.
[_BSD_SOURCE || _SVID_SOURCE]: Change condition to
[_DEFAULT_SOURCE].
* bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC].
* bits/mman.h [__USE_BSD]: Likewise.
* bits/termios.h [__USE_BSD]: Likewise.
* bits/waitstatus.h [__USE_BSD]: Likewise.
* ctype/ctype.h [__USE_SVID]: Likewise.
* dirent/dirent.h [__USE_BSD]: Likewise.
* grp/grp.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* inet/netinet/igmp.h [__USE_BSD]: Likewise.
* io/fcntl.h [__USE_BSD]: Likewise.
* io/ftw.h [__USE_BSD]: Likewise.
* io/sys/stat.h [__USE_BSD]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise.
* libio/bits/stdio2.h [__USE_BSD]: Likewise.
* libio/stdio.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* math/math.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise.
* misc/bits/syslog.h [__USE_BSD]: Likewise.
* misc/search.h [__USE_SVID]: Likewise.
* misc/sys/mman.h [__USE_BSD]: Likewise.
* misc/sys/syslog.h [__USE_BSD]: Likewise.
* misc/sys/uio.h [__USE_BSD]: Likewise.
* posix/bits/unistd.h [__USE_BSD]: Likewise.
* posix/glob.h [__USE_BSD]: Likewise.
* posix/regex.h [__USE_BSD]: Likewise.
* posix/sys/types.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/sys/utsname.h [__USE_SVID]: Likewise.
* posix/sys/wait.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/unistd.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* pwd/pwd.h [__USE_SVID]: Likewise.
* resolv/netdb.h [__USE_BSD]: Likewise.
* setjmp/setjmp.h [__USE_BSD]: Likewise.
* signal/signal.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* socket/sys/socket.h [__USE_BSD]: Likewise.
* stdlib/fmtmsg.h [__USE_SVID]: Likewise.
* stdlib/stdlib.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string2.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string3.h [__USE_BSD]: Likewise.
* string/endian.h [__USE_BSD]: Likewise.
* string/string.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* string/strings.h [__USE_BSD]: Likewise.
* sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise.
* sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/x86/bits/string.h [__USE_BSD]: Likewise.
* sysvipc/sys/ipc.h [__USE_SVID]: Likewise.
* termios/termios.h [__USE_BSD]: Likewise.
* time/sys/time.h [__USE_BSD]: Likewise.
* time/time.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change
condition to [__USE_MISC].
|
|
|
|
|
|
In the string/string.h and string/strings.h headers, we have a couple
of macros that "tell the caller that we provide correct C++
prototypes" according to the comment; they are used to determine
whether to wrap some prototypes in "extern "C++"" (and provide
multiple overloads of them, and some other magic) when __cplusplus is
defined.
The macros are set to check for sufficiently-recent GCC versions (4.4
and later), but this is not the right check for non-GCC compilers. In
particular, these macros should also be set when using Clang -- if
they are not set, then Clang will be unable to correctly diagnose a
number of subtle bugs that will be errors in GCC compilations.
As per discussion on earlier versions of this patch, rather than
restrict the fix to Clang per se, we assume that all C++ compilers that
claim to fully support C++98 are using a standard-conforming C++
standard library, which seems pretty reasonable. Clang has been
providing an appropriate value of __cplusplus since May 2012.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* string/strcoll_l.c: Include <sys/param.h> for MIN/MAX macros.
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00095.html
I found this useful at one stage when I was seeing a huge number of
memrchr failures all of test number 10.
* string/tester.c (test_memrchr): Increment reported test cycle.
|
|
http://sourceware.org/ml/libc-alpha/2013-08/msg00094.html
Using plain %s here runs the risk of segfaulting when displaying the
string. src and dst aren't zero terminated strings.
* string/test-memcpy.c (do_one_test): When reporting errors, print
string address and don't overrun end of string.
|
|
strcoll is implemented using a cache for indices and weights of
collation sequences in the strings so that subsequent passes do not
have to search through collation data again. For very large string
inputs, the cache size computation could overflow. In such a case,
use the fallback function that does not cache indices and weights of
collation sequences.
Fixes CVE-2012-4412.
|
|
strcoll currently falls back to alloca if malloc fails, resulting in a
possible stack overflow. This patch implements sequence traversal and
comparison without caching indices and rules.
Fixes CVE-2012-4424.
|
|
|
|
|
|
|
|
Break up strcoll into simpler functions so that the logic is easier to
follow and maintain.
|
|
|
|
Check wheter the compiler has the option -fno-tree-loop-distribute-patterns
to inhibit loop transformation to library calls and uses it on memset
and memmove default implementation to avoid recursive calls.
|
|
|
|
|
|
|
|
|
|
The __strcmp_cg code was duplicate of of __strcmp_gc. This patch unifies
these two cases into one.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
