aboutsummaryrefslogtreecommitdiff
path: root/string
AgeCommit message (Collapse)Author
2020-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2019-12-05<string.h>: Define __CORRECT_ISO_CPP_STRING_H_PROTO for Clang [BZ #25232]Kamlesh Kumar
Without the asm redirects, strchr et al. are not const-correct. libc++ has a wrapper header that works with and without __CORRECT_ISO_CPP_STRING_H_PROTO (using a Clang extension). But when Clang is used with libstdc++ or just C headers, the overloaded functions with the correct types are not declared. This change does not impact current GCC (with libstdc++ or libc++).
2019-11-27S390: Fix handling of needles crossing a page in strstr z15 ifunc-variant. ↵Stefan Liebler
[BZ #25226] If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of strstr truncates the needle which results in invalid results. This is fixed by loading the needle beyond the page boundary to v18 instead of v16. The bug is sometimes observable in test-strstr.c in check1 and check2 as the haystack and needle is stored on stack. Thus the needle can be on a page boundary. check2 is now extended to test haystack / needles located on stack, at end of page and on two pages. This bug was introduced with commit 6f47401bd5fc71209219779a0426170a9a7395b0 ("S390: Add arch13 strstr ifunc variant.") and is already released in glibc 2.30.
2019-10-30Change most internal uses of time to __clock_gettime.Adhemerval Zanella
As for gettimeofday, time will be implemented based on clock_gettime on all platforms and internal code should use clock_gettime directly. In addition to removing a layer of indirection, this will allow us to remove the PLT-bypass gunk for gettimeofday. The changed code always assumes __clock_gettime (CLOCK_REALTIME) or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot fail, using the same rationale for gettimeofday change. And internal helper was added (time_now). Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, powerpc64-linux-gnu, and powerpc-linux-gnu. Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-02string/endian.h: Restore the __USE_MISC conditionalsAlistair Francis
Commit 69fd157a3 "time: Add padding for the timespec if required" caused a breakage in the glibc tests as the endian.h include file was kept in the networking headers while the __USE_MISC #ifdefs had been removed. This resulted in namespace violations in the networking headers. This patche restores the __USE_MISC conditionals in endian.h to fix the test failures. * string/endian.h: Restore the __USE_MISC conditionals.
2019-10-02Disable warnings in string/tester.c at top level.Joseph Myers
string/tester.c contains code that correctly triggers various GCC warnings about dubious uses of string functions (uses that are being deliberately tested there), and duly disables those warnings around the relevant code. A change in GCC mainline resulted in this code failing to compile with a -Warray-bounds error, despite the location with the error having -Warray-bounds already disabled. This has been reported as <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91890>. This patch avoids that problem and possible future issues with these diagnostics by moving all the warning disabling in this file to top level, as suggested by Florian in <https://sourceware.org/ml/libc-alpha/2019-10/msg00033.html>, rather than only doing it locally around specific function calls. Tested with build-many-glibcs.py for aarch64-linux-gnu with GCC mainline (with only the conform/ failures noted in <https://sourceware.org/ml/libc-alpha/2019-10/msg00043.html>). * string/tester.c: Ignore -Warray-bounds and -Wmemset-transposed-args at top level. [__GNUC_PREREQ (7, 0)]: Ignore -Wrestrict and -Wstringop-overflow= at top level. [__GNUC_PREREQ (8, 0)]: Ignore -Wstringop-truncation at top level. (test_stpncpy): Do not ignore warnings here. (test_strncat): Likewise. (test_strncpy): Likewise. (test_memset): Likewise.
2019-10-01Split up endian.h to minimize exposure of BYTE_ORDER.Alistair Francis
With only two exceptions (sys/types.h and sys/param.h, both of which historically might have defined BYTE_ORDER) the public headers that include <endian.h> only want to be able to test __BYTE_ORDER against __*_ENDIAN. This patch creates a new bits/endian.h that can be included by any header that wants to be able to test __BYTE_ORDER and/or __FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs __LONG_LONG_PAIR. It only defines macros in the implementation namespace. The existing bits/endian.h (which could not be included independently of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER) is renamed to bits/endianness.h. I also took the opportunity to canonicalize the form of this header, which we are stuck with having one copy of per architecture. Since they are so short, this means git doesn’t understand that they were renamed from existing headers, sigh. endian.h itself is a nonstandard header and its only remaining use from a standard header is guarded by __USE_MISC, so I dropped the __USE_MISC conditionals from around all of the public-namespace things it defines. (This means, an application that requests strict library conformance but includes endian.h will still see the definition of BYTE_ORDER.) A few changes to specific bits/endian(ness).h variants deserve mention: - sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did have selectable endianness, but we have assembly code in sysdeps/ia64 that assumes it’s little-endian, so there is no reason to treat the ia64 endianness.h as linux-specific. - The C-SKY port does not fully support big-endian mode, the compile will error out if __CSKYBE__ is defined. - The PowerPC port had extra logic in its bits/endian.h to detect a broken compiler, which strikes me as unnecessary, so I removed it. - The only files that defined __FLOAT_WORD_ORDER always defined it to the same value as __BYTE_ORDER, so I removed those definitions. The SH bits/endian(ness).h had comments inconsistent with the actual setting of __FLOAT_WORD_ORDER, which I also removed. - I *removed* copyright boilerplate from the few bits/endian(ness).h headers that had it; these files record a single fact in a fashion dictated by an external spec, so I do not think they are copyrightable. As long as I was changing every copy of ieee754.h in the tree, I noticed that only the MIPS variant includes float.h, because it uses LDBL_MANT_DIG to decide among three different versions of ieee854_long_double. This patch makes it not include float.h when GCC’s intrinsic __LDBL_MANT_DIG__ is available. * string/endian.h: Unconditionally define LITTLE_ENDIAN, BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping macros only on !__ASSEMBLER__. Move the definitions of __BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER, and __LONG_LONG_PAIR to... * string/bits/endian.h: ...this new file, which includes the renamed header bits/endianness.h for the definition of __BYTE_ORDER and possibly __FLOAT_WORD_ORDER. * string/Makefile: Install bits/endianness.h. * include/bits/endian.h: New wrapper. * bits/endian.h: Rename to bits/endianness.h. Add multiple-include guard. Rewrite the comment explaining what the machine-specific variants of this file should do. * sysdeps/unix/sysv/linux/ia64/bits/endian.h: Move to sysdeps/ia64. * sysdeps/aarch64/bits/endian.h * sysdeps/alpha/bits/endian.h * sysdeps/arm/bits/endian.h * sysdeps/csky/bits/endian.h * sysdeps/hppa/bits/endian.h * sysdeps/ia64/bits/endian.h * sysdeps/m68k/bits/endian.h * sysdeps/microblaze/bits/endian.h * sysdeps/mips/bits/endian.h * sysdeps/nios2/bits/endian.h * sysdeps/powerpc/bits/endian.h * sysdeps/riscv/bits/endian.h * sysdeps/s390/bits/endian.h * sysdeps/sh/bits/endian.h * sysdeps/sparc/bits/endian.h * sysdeps/x86/bits/endian.h: Rename to endianness.h; canonicalize form of file; remove redundant definitions of __FLOAT_WORD_ORDER. * sysdeps/powerpc/bits/endianness.h: Remove logic to check for broken compilers. * ctype/ctype.h * sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h * sysdeps/arm/nptl/bits/pthreadtypes-arch.h * sysdeps/csky/nptl/bits/pthreadtypes-arch.h * sysdeps/ia64/ieee754.h * sysdeps/ieee754/ieee754.h * sysdeps/ieee754/ldbl-128/ieee754.h * sysdeps/ieee754/ldbl-128ibm/ieee754.h * sysdeps/m68k/nptl/bits/pthreadtypes-arch.h * sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h * sysdeps/mips/ieee754/ieee754.h * sysdeps/mips/nptl/bits/pthreadtypes-arch.h * sysdeps/nios2/nptl/bits/pthreadtypes-arch.h * sysdeps/nptl/pthread.h * sysdeps/riscv/nptl/bits/pthreadtypes-arch.h * sysdeps/sh/nptl/bits/pthreadtypes-arch.h * sysdeps/sparc/sparc32/ieee754.h * sysdeps/unix/sysv/linux/generic/bits/stat.h * sysdeps/unix/sysv/linux/generic/bits/statfs.h * sysdeps/unix/sysv/linux/sys/acct.h * wctype/bits/wctype-wchar.h: Include bits/endian.h, not endian.h. * sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h. * sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__ in ifdefs, instead of LDBL_MANT_DIG. Only include float.h when __LDBL_MANT_DIG__ is not predefined, in which case define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-08-30Use generic memset/memcpy/memmove in benchtestsWilco Dijkstra
Use the generic C memset/memcpy/memmove in benchtests since comparing against a slow byte-oriented implementation makes no sense. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> 2019-08-29 Wilco Dijkstra <wdijkstr@arm.com> * benchtests/bench-memcpy.c (simple_memcpy): Remove. (generic_memcpy): Include generic C memcpy. * benchtests/bench-memmove.c (simple_memmove): Remove. (generic_memmove): Include generic C memmove. * benchtests/bench-memset.c (simple_memset): Remove. (generic_memset): Include generic C memset. * benchtests/bench-memset-large.c (simple_memset): Remove. (generic_memset): Include generic C memset. * benchtests/bench-memset-walk.c (simple_memset): Remove. (generic_memset): Include generic C memset. * string/memcpy.c (MEMCPY): Add defines to enable redirection. * string/memset.c (MEMSET): Likewise. * sysdeps/x86_64/memcopy.h: Remove empty file.
2019-08-23Fix spellings of contributor names in comments and docPaul Eggert
2019-08-21Don't use the argument to time.Zack Weinberg
It doesn't make sense to remove all the internal uses of time. It's still a standard ISO C function, and its callers don't need sub-second resolution and would be unnecessarily complicated if they had to declare a struct timespec instead of just a time_t. However, a handful of places were using the vestigial "result" argument instead of the return value, which is slightly less efficient and also looks strange. Correct this. * misc/syslog.c (__vsyslog_internal) * time/getdate.c (__getdate_r) * time/tst_wcsftime.c (main): Use return value of time, not its argument. * string/strfry.c (strfry) * sysdeps/mach/sleep.c (__sleep): Remove unnecessary casts of NULL in calls to time.
2019-08-13Declare memccpy, strdup, strndup for C2X.Joseph Myers
C2X adds the memccpy, strdup and strndup functions. This patch duly adds __GLIBC_USE (ISOC2X) to the conditions under which <string.h> declares them. Tested for x86_64. * string/string.h (memccpy): Also declare if [__GLIBC_USE (ISOC2X)]. (strdup): Likewise. (strndup): Likewise.
2019-06-19Fix gcc 9 build errors for make xcheck. [BZ #24556]Stefan Liebler
This patch fixes the following gcc 9 warnings for "make xcheck" / "make bench": -string/tst-strcasestr.c: ../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=] -argp/argp-test.c: argp-test.c:130:20: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=] argp-test.c:130:19: note: directive argument in the range [-2147483648, 122] argp-test.c:130:5: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 10 -nss/tst-field.c: tst-field.c:52:7: error: ‘%s’ directive argument is null [-Werror=format-overflow=] -benchtests/bench-strstr.c: ../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=] -benchtests/bench-malloc-simple.c: bench-malloc-simple.c:93:16: error: iteration 3 invokes undefined behavior [-Werror=aggressive-loop-optimizations] ChangeLog: [BZ #24556] * string/test-strcasestr.c (check_result): Add NULL check. * nss/tst-field.c (check_rewrite): Likewise. * benchtests/bench-strstr.c (do_one_test): Likewise. * string/test-strstr.c (check_result): Likewise. * argp/argp-test.c (popt): Increase size of buf to 12. * benchtests/bench-malloc-simple.c (bench): Do not initialize tests array out of bounds.
2019-06-12Improve performance of memmemWilco Dijkstra
This patch significantly improves performance of memmem using a novel modified Horspool algorithm. Needles up to size 256 use a bad-character table indexed by hashed pairs of characters to quickly skip past mismatches. Long needles use a self-adapting filtering step to avoid comparing the whole needle repeatedly. By limiting the needle length to 256, the shift table only requires 8 bits per entry, lowering preprocessing overhead and minimizing cache effects. This limit also implies worst-case performance is linear. Small needles up to size 2 use a dedicated linear search. Very long needles use the Two-Way algorithm (to avoid increasing stack size or slowing down the common case, inlining is disabled). The performance gain is 6.6 times on English text on AArch64 using random needles with average size 8. Tested against GLIBC testsuite and randomized tests. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> * string/memmem.c (__memmem): Rewrite to improve performance.
2019-06-12Improve performance of strstrWilco Dijkstra
This patch significantly improves performance of strstr using a novel modified Horspool algorithm. Needles up to size 256 use a bad-character table indexed by hashed pairs of characters to quickly skip past mismatches. Long needles use a self-adapting filtering step to avoid comparing the whole needle repeatedly. By limiting the needle length to 256, the shift table only requires 8 bits per entry, lowering preprocessing overhead and minimizing cache effects. This limit also implies worst-case performance is linear. Small needles up to size 3 use a dedicated linear search. Very long needles use the Two-Way algorithm. The performance gain using the improved bench-strstr on Cortex-A72 is 5.8 times basic_strstr and 3.7 times twoway_strstr. Tested against GLIBC testsuite, randomized tests and the GNULIB strstr test (https://git.savannah.gnu.org/cgit/gnulib.git/tree/tests/test-strstr.c). Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> * string/str-two-way.h (two_way_short_needle): Add inline to avoid warning. (two_way_long_needle): Block inlining. * string/strstr.c (strstr2): Add new function. (strstr3): Likewise. (STRSTR): Completely rewrite strstr to improve performance.
2019-02-27Add some spaces before '('.Joseph Myers
This patch fixes various places where a space should have been present before '(' in accordance with the GNU Coding Standards. Most but not all of the fixes in this patch are for calls to sizeof (but it's not exhaustive regarding such calls that should be fixed). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-strcpy.c (do_test): Use space before '('. * benchtests/bench-string.h (cmdline_process_function): Likewise. * benchtests/bench-strlen.c (do_test): Likewise. (test_main): Likewise. * catgets/gencat.c (read_old): Likewise. * elf/cache.c (load_aux_cache): Likewise. * iconvdata/bug-iconv8.c (do_test): Likewise. * math/test-tgmath-ret.c (do_test): Likewise. * nis/nis_call.c (rec_dirsearch): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nptl/tst-audit-threads.c (do_test): Likewise. * nptl/tst-cancel4-common.h (set_socket_buffer): Likewise. * nss/nss_test1.c (init): Likewise. * nss/test-netdb.c (test_hosts): Likewise. * posix/execvpe.c (maybe_script_execute): Likewise. * stdio-common/tst-fmemopen4.c (do_test): Likewise. * stdio-common/tst-printf.c (do_test): Likewise. * stdio-common/vfscanf-internal.c (__vfscanf_internal): Likewise. * stdlib/fmtmsg.c (NKEYWORDS): Likewise. * stdlib/qsort.c (STACK_SIZE): Likewise. * stdlib/test-canon.c (do_test): Likewise. * stdlib/tst-swapcontext1.c (do_test): Likewise. * string/memcmp.c (OPSIZ): Likewise. * string/test-strcpy.c (do_test): Likewise. (do_random_tests): Likewise. * string/test-strlen.c (do_test): Likewise. (test_main): Likewise. * string/test-strrchr.c (do_test): Likewise. (do_random_tests): Likewise. * string/tester.c (test_memrchr): Likewise. (test_memchr): Likewise. * sysdeps/generic/memcopy.h (OPSIZ): Likewise. * sysdeps/generic/unwind-dw2.c (execute_stack_op): Likewise. * sysdeps/generic/unwind-pe.h (read_sleb128): Likewise. (read_encoded_value_with_base): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_runtime_setup): Likewise. * sysdeps/hppa/fpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/ia64/fpu/sfp-machine.h (TI_BITS): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/posix/spawni.c (maybe_script_execute): Likewise. * sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (query_auxv): Likewise. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/arm/ioperm.c (init_iosys): Likewise. * sysdeps/unix/sysv/linux/csky/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/spawni.c (maybe_script_execute): Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h (ELF_NGREG): Likewise. * sysdeps/unix/sysv/linux/x86/bits/sigcontext.h (FP_XSTATE_MAGIC2_SIZE): Likewise. * sysdeps/x86/fpu/sfp-machine.h (TI_BITS): Likewise. * time/test_time.c (main): Likewise.
2019-02-25Break more lines before not after operators.Joseph Myers
This patch makes further coding style fixes where code was breaking lines after an operator, contrary to the GNU Coding Standards. As with the previous patch, it is limited to files following a reasonable approximation to GNU style already, and is not exhaustive; more such issues remain to be fixed. Tested for x86_64, and with build-many-glibcs.py. * dirent/dirent.h [!_DIRENT_HAVE_D_NAMLEN && _DIRENT_HAVE_D_RECLEN] (_D_ALLOC_NAMLEN): Break lines before rather than after operators. * elf/cache.c (print_cache): Likewise. * gshadow/fgetsgent_r.c (__fgetsgent_r): Likewise. * htl/pt-getattr.c (__pthread_getattr_np): Likewise. * hurd/hurdinit.c (_hurd_setproc): Likewise. * hurd/hurdkill.c (_hurd_sig_post): Likewise. * hurd/hurdlookup.c (__file_name_lookup_under): Likewise. * hurd/hurdsig.c (_hurd_internal_post_signal): Likewise. (reauth_proc): Likewise. * hurd/lookup-at.c (__file_name_lookup_at): Likewise. (__file_name_split_at): Likewise. (__directory_name_split_at): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/port2fd.c (_hurd_port2fd): Likewise. * iconv/gconv_dl.c (do_print): Likewise. * inet/netinet/in.h (struct sockaddr_in): Likewise. * libio/wstrops.c (_IO_wstr_seekoff): Likewise. * locale/setlocale.c (new_composite_name): Likewise. * malloc/memusagestat.c (main): Likewise. * misc/fstab.c (fstab_convert): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. * nss/nss_compat/compat-grp.c (getgrent_next_nss): Likewise. (getgrent_next_file): Likewise. (internal_getgrnam_r): Likewise. (internal_getgrgid_r): Likewise. * nss/nss_compat/compat-initgroups.c (getgrent_next_nss): Likewise. (internal_getgrent_r): Likewise. * nss/nss_compat/compat-pwd.c (getpwent_next_nss_netgr): Likewise. (getpwent_next_nss): Likewise. (getpwent_next_file): Likewise. (internal_getpwnam_r): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (getspent_next_nss_netgr): Likewise. (getspent_next_nss): Likewise. (internal_getspnam_r): Likewise. * pwd/fgetpwent_r.c (__fgetpwent_r): Likewise. * shadow/fgetspent_r.c (__fgetspent_r): Likewise. * string/strchr.c (STRCHR): Likewise. * string/strchrnul.c (STRCHRNUL): Likewise. * sysdeps/aarch64/fpu/fpu_control.h (_FPU_FPCR_IEEE): Likewise. * sysdeps/aarch64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/csky/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/generic/memcopy.h (PAGE_COPY_FWD_MAYBE): Likewise. * sysdeps/generic/symbol-hacks.h (__stack_chk_fail_local): Likewise. * sysdeps/gnu/netinet/ip_icmp.h (ICMP_INFOTYPE): Likewise. * sysdeps/gnu/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/gnu/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/hppa/jmpbuf-unwind.h (_JMPBUF_UNWINDS): Likewise. * sysdeps/mach/hurd/bits/stat.h (S_ISPARE): Likewise. * sysdeps/mach/hurd/dl-sysdep.c (_dl_sysdep_start): Likewise. (open_file): Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprotocol.c (pthread_mutexattr_setprotocol): Likewise. * sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/ptrace.c (ptrace): Likewise. * sysdeps/mach/hurd/spawni.c (__spawni): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_type_class): Likewise. (elf_machine_rela): Likewise. * sysdeps/mips/mips32/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/mips64/sfp-machine.h (_FP_CHOOSENAN): Likewise. * sysdeps/mips/sys/asm.h (multiple #if conditionals): Likewise. * sysdeps/posix/rename.c (rename): Likewise. * sysdeps/powerpc/novmx-sigjmp.c (__novmx__sigjmp_save): Likewise. * sysdeps/powerpc/sigjmp.c (__vmx__sigjmp_save): Likewise. * sysdeps/s390/fpu/fenv_libc.h (FPC_VALID_MASK): Likewise. * sysdeps/s390/utf8-utf16-z9.c (gconv_end): Likewise. * sysdeps/unix/grantpt.c (grantpt): Likewise. * sysdeps/unix/sysv/linux/a.out.h (N_TXTOFF): Likewise. * sysdeps/unix/sysv/linux/updwtmp.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/unix/sysv/linux/utmp_file.c (TRANSFORM_UTMP_FILE_NAME): Likewise. * sysdeps/x86/cpu-features.c (get_common_indices): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
2019-02-22Break some lines before not after operators.Joseph Myers
The GNU Coding Standards specify that line breaks in expressions should go before an operator, not after one. This patch fixes various code to do this. It only changes code that appears to be mostly following GNU style anyway, not files and directories with substantially different formatting. It is not exhaustive even for files using GNU style (for example, changes to sysdeps files are deferred for subsequent cleanups). Some files changed are shared with gnulib, but most are specific to glibc. Changes were made manually, with places to change found by grep (so some cases, e.g. where the operator was followed by a comment at end of line, are particularly liable to have been missed by grep, but I did include cases where the operator was followed by backslash-newline). This patch generally does not attempt to address other coding style issues in the expressions changed (for example, missing spaces before '(', or lack of parentheses to ensure indentation of continuation lines properly reflects operator precedence). Tested for x86_64, and with build-many-glibcs.py. * benchtests/bench-memmem.c (simple_memmem): Break lines before rather than after operators. * benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise. * crypt/md5.c (md5_finish_ctx): Likewise. * crypt/sha256.c (__sha256_finish_ctx): Likewise. * crypt/sha512.c (__sha512_finish_ctx): Likewise. * elf/cache.c (load_aux_cache): Likewise. * elf/dl-load.c (open_verify): Likewise. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * elf/readelflib.c (process_elf_file): Likewise. * elf/rtld.c (dl_main): Likewise. * elf/sprof.c (generate_call_graph): Likewise. * hurd/ctty-input.c (_hurd_ctty_input): Likewise. * hurd/ctty-output.c (_hurd_ctty_output): Likewise. * hurd/dtable.c (reauth_dtable): Likewise. * hurd/getdport.c (__getdport): Likewise. * hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise. * hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise. * hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise): Likewise. * hurd/hurdioctl.c (fioctl): Likewise. * hurd/hurdselect.c (_hurd_select): Likewise. * hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise. (STOPSIGS): Likewise. * hurd/hurdstartup.c (_hurd_startup): Likewise. * hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise. * hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise. * hurd/msgportdemux.c (msgport_server): Likewise. * hurd/setauth.c (_hurd_setauth): Likewise. * include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise. * libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise. * locale/programs/ld-ctype.c (set_class_defaults): Likewise. * localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise. * login/tst-utmp.c (do_check): Likewise. (simulate_login): Likewise. * mach/lowlevellock.h (lll_lock): Likewise. (lll_trylock): Likewise. * math/test-fenv.c (ALL_EXC): Likewise. * math/test-fenvinline.c (ALL_EXC): Likewise. * misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise. * nis/nis_call.c (__do_niscall3): Likewise. * nis/nis_callback.c (cb_prog_1): Likewise. * nis/nis_defaults.c (searchaccess): Likewise. * nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise. * nis/nis_ismember.c (internal_ismember): Likewise. * nis/nis_local_names.c (nis_local_principal): Likewise. * nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise. * nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r): Likewise. * nis/ypclnt.c (yp_match): Likewise. (yp_first): Likewise. (yp_next): Likewise. (yp_master): Likewise. (yp_order): Likewise. * nscd/hstcache.c (cache_addhst): Likewise. * nscd/initgrcache.c (addinitgroupsX): Likewise. * nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise. (internal_getpwuid_r): Likewise. * nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise. * posix/glob.h (__GLOB_FLAGS): Likewise. * posix/regcomp.c (peek_token): Likewise. (peek_token_bracket): Likewise. (parse_expression): Likewise. * posix/regexec.c (sift_states_iter_mb): Likewise. (check_node_accept_bytes): Likewise. * posix/tst-spawn3.c (do_test): Likewise. * posix/wordexp-test.c (testit): Likewise. * posix/wordexp.c (parse_tilde): Likewise. (exec_comm): Likewise. * posix/wordexp.h (__WRDE_FLAGS): Likewise. * resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise. * setjmp/sigjmp.c (__sigjmp_save): Likewise. * stdio-common/printf_fp.c (__printf_fp_l): Likewise. * stdio-common/tst-fileno.c (do_test): Likewise. * stdio-common/vfprintf-internal.c (vfprintf): Likewise. * stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise. * stdlib/strtod_l.c (round_and_return): Likewise. (____STRTOF_INTERNAL): Likewise. * stdlib/tst-strfrom.h (TEST_STRFROM): Likewise. * string/strcspn.c (STRCSPN): Likewise. * string/test-memmem.c (simple_memmem): Likewise. * termios/tcsetattr.c (tcsetattr): Likewise. * time/alt_digit.c (_nl_parse_alt_digit): Likewise. * time/asctime.c (asctime_internal): Likewise. * time/strptime_l.c (__strptime_internal): Likewise. * time/sys/time.h (timercmp): Likewise. * time/tzfile.c (__tzfile_compute): Likewise.
2019-01-07Only build libm with -fno-math-errno (bug 24024)Aurelien Jarno
Commit 1294b1892e ("Add support for sqrt asm redirects") added the -fno-math-errno flag to build most of the glibc in order to enable GCC to inline math functions. Due to GCC bug #88576, saving and restoring errno around calls to malloc are optimized-out. In turn this causes strerror to set errno to ENOMEM if it get passed an invalid error number and if malloc sets errno to ENOMEM (which might happen even if it succeeds). This is not allowed by POSIX. This patch changes the build flags, building only libm with -fno-math-errno and all the remaining code with -fno-math-errno. This should be safe as libm doesn't contain any code saving and restoring errno around malloc. This patch can probably be reverted once the GCC bug is fixed and available in stable releases. Tested on x86-64, no regression in the testsuite. Changelog: [BZ #24024] * Makeconfig: Build libm with -fno-math-errno but build the remaining code with -fmath-errno. * string/Makefile [$(build-shared)] (tests): Add test-strerror-errno. [$(build-shared)] (LDLIBS-test-strerror-errno): New variable. * string/test-strerror-errno.c: New file.
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-09-19Fix strstr bug with huge needles (bug 23637)Wilco Dijkstra
The generic strstr in GLIBC 2.28 fails to match huge needles. The optimized AVAILABLE macro reads ahead a large fixed amount to reduce the overhead of repeatedly checking for the end of the string. However if the needle length is larger than this, two_way_long_needle may confuse this as meaning the end of the string and return NULL. This is fixed by adding the needle length to the amount to read ahead. [BZ #23637] * string/test-strstr.c (pr23637): New function. (test_main): Add tests with longer needles. * string/strcasestr.c (AVAILABLE): Fix readahead distance. * string/strstr.c (AVAILABLE): Likewise.
2018-08-28Speedup first memmem matchRajalakshmi Srinivasaraghavan
As done in commit 284f42bc778e487dfd5dff5c01959f93b9e0c4f5, memcmp can be used after memchr to avoid the initialization overhead of the two-way algorithm for the first match. This has shown improvement >40% for first match.
2018-08-03Simplify and speedup strstr/strcasestr first matchWilco Dijkstra
Looking at the benchtests, both strstr and strcasestr spend a lot of time in a slow initialization loop handling one character per iteration. This can be simplified and use the much faster strlen/strnlen/strchr/memcmp. Read ahead a few cachelines to reduce the number of strnlen calls, which improves performance by ~3-4%. This patch improves the time taken for the full strstr benchtest by >40%. * string/strcasestr.c (STRCASESTR): Simplify and speedup first match. * string/strstr.c (AVAILABLE): Likewise.
2018-07-26Fix string/tst-xbzero-opt if build with gcc head.Stefan Liebler
On s390x, the test string/tst-xbzero-opt is failing if build with gcc head: FAIL: no clear/prepare: expected 32 got 0 FAIL: no clear/test: expected some got 0 FAIL: ordinary clear/prepare: expected 32 got 0 INFO: ordinary clear/test: found 0 patterns (memset not eliminated) PASS: explicit clear/prepare: expected 32 got 32 PASS: explicit clear/test: expected 0 got 0 In setup_no_clear / setup_ordinary_clear, GCC is omitting the memcpy loop in prepare_test_buffer. Thus count_test_patterns does not find any of the test_pattern. This patch calls use_test_buffer in order to force the compiler to really copy the pattern to buf. ChangeLog: * string/tst-xbzero-opt.c (use_test_buffer): New function. (prepare_test_buffer): Call use_test_buffer as compiler barrier.
2018-07-24Add <bits/indirect-return.h>H.J. Lu
Add <bits/indirect-return.h> and include it in <ucontext.h>. __INDIRECT_RETURN defined in <bits/indirect-return.h> indicates if swapcontext requires special compiler treatment. The default __INDIRECT_RETURN is empty. On x86, when shadow stack is enabled, __INDIRECT_RETURN is defined with indirect_return attribute, which has been added to GCC 9, to indicate that swapcontext returns via indirect branch. Otherwise __INDIRECT_RETURN is defined with returns_twice attribute. When shadow stack is enabled, remove always_inline attribute from prepare_test_buffer in string/tst-xbzero-opt.c to avoid: tst-xbzero-opt.c: In function ‘prepare_test_buffer’: tst-xbzero-opt.c:105:1: error: function ‘prepare_test_buffer’ can never be inlined because it uses setjmp prepare_test_buffer (unsigned char *buf) when indirect_return attribute isn't available. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * bits/indirect-return.h: New file. * misc/sys/cdefs.h (__glibc_has_attribute): New. * sysdeps/x86/bits/indirect-return.h: Likewise. * stdlib/Makefile (headers): Add bits/indirect-return.h. * stdlib/ucontext.h: Include <bits/indirect-return.h>. (swapcontext): Add __INDIRECT_RETURN. * string/tst-xbzero-opt.c (ALWAYS_INLINE): New. (prepare_test_buffer): Use it.
2018-07-16Improve strstr performanceWilco Dijkstra
Improve strstr performance. Strstr tends to be slow because it uses many calls to memchr and a slow byte loop to scan for the next match. Performance is significantly improved by using strnlen on larger blocks and using strchr to search for the next matching character. strcasestr can also use strnlen to scan ahead, and memmem can use memchr to check for the next match. On the GLIBC bench tests the performance gains on Cortex-A72 are: strstr: +25% strcasestr: +4.3% memmem: +18% On a 256KB dataset strstr performance improves by 67%, strcasestr by 47%. Reviewd-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2018-06-29libc: Extend __libc_freeres framework (Bug 23329).Carlos O'Donell
The __libc_freeres framework does not extend to non-libc.so objects. This causes problems in general for valgrind and mtrace detecting unfreed objects in both libdl.so and libpthread.so. This change is a pre-requisite to properly moving the malloc hooks out of malloc since such a move now requires precise accounting of all allocated data before destructors are run. This commit adds a proper hook in libc.so.6 for both libdl.so and for libpthread.so, this ensures that shm-directory.c which uses freeit () to free memory is called properly. We also remove the nptl_freeres hook and fall back to using weak-ref-and-check idiom for a loaded libpthread.so, thus making this process similar for all DSOs. Lastly we follow best practice and use explicit free calls for both libdl.so and libpthread.so instead of the generic hook process which has undefined order. Tested on x86_64 with no regressions. Signed-off-by: DJ Delorie <dj@redhat.com> Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2018-06-26Run thread shutdown functions in an explicit orderFlorian Weimer
This removes the __libc_thread_subfreeres hook in favor of explict calls. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-06-20Fix tst-cmp.c build with GCC mainline.Joseph Myers
Building the testsuite with GCC mainline fails with -Wstringop-overflow= errors in string/tst-cmp.c. These are for calls to strncmp and strncasecmp with SIZE_MAX size argument. The tests are deliberately using this size that would be dubious in normal code, so this patch disables the warning for the calls in question. Tested with build-many-glibcs.py for aarch64-linux-gnu. * string/tst-cmp.c: Include <libc-diag.h>. (strncmp_max): Disable -Wstringop-overflow= around call to strncmp. (strncasecmp_max): Disable -Wstringop-overflow= around call to strncasecmp.
2018-06-20Fix bug-strspn1.c, bug-strpbrk1.c build with GCC mainline.Joseph Myers
Building the testsuite with GCC mainline fails with: bug-strspn1.c: In function 'main': bug-strspn1.c:14:3: error: right-hand operand of comma expression has no effect [-Werror=unused-value] strspn (b++, ""); ^~~~~~~~~~~~~~~~ and a similar error for bug-strpbrk1.c. I'm not sure what GCC change introduced this, and the wording of the message is a bit off (in the source it's not a comma expression, that must reflect GCC's IR). But the warning is correct (strspn is a pure function, the call is useless, and if there wasn't an argument with a side effect much older GCC would have warned); the point of the test is to verify that the side effect in an argument still occurs for this useless call that can otherwise be optimized to an (unused) constant (testing for a bug there once was in an old strspn macro). This patch duly arranges for the warning to be disabled for this code. Tested with build-many-glibcs.py for aarch64-linux-gnu. * string/bug-strpbrk1.c: Include <libc-diag.h>. (main): Disable -Wunused-value around call to strpbrk. * string/bug-strspn1.c: Include <libc-diag.h>. (main): Disable -Wunused-value around call to strspn.
2018-06-14Ignore -Wrestrict for one strncat test.Joseph Myers
With current GCC mainline, one strncat test involving a size close to SIZE_MAX results in a -Wrestrict warning that that buffer size would imply that the two buffers must overlap. This patch fixes the build by adding disabling of -Wrestrict (for GCC versions supporting that option) to the already-present disabling of -Wstringop-overflow= and -Warray-bounds for this test. Tested with build-many-glibcs.py that this restores the testsuite build with GCC mainline for aarch64-linux-gnu. * string/tester.c (test_strncat) [__GNUC_PREREQ (7, 0)]: Also ignore -Wrestrict for one test.
2018-05-23Add a test case for [BZ #23196]H.J. Lu
[BZ #23196] * string/test-memcpy.c (do_test1): New function. (test_main): Call it.
2018-05-23Don't write beyond destination in __mempcpy_avx512_no_vzeroupper (bug 23196)Andreas Schwab
When compiled as mempcpy, the return value is the end of the destination buffer, thus it cannot be used to refer to the start of it.
2018-03-23Fix i386 memmove issue (bug 22644).Andrew Senkevich
[BZ #22644] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Fixed branch conditions. * string/test-memmove.c (do_test2): New testcase.
2018-02-26Fix another -Os strcoll build issue.Joseph Myers
While there are now clean -Os build and test results on x86_64 (given my patch <https://sourceware.org/ml/libc-alpha/2018-02/msg00602.html>, pending review), testing with -Os with build-many-glibcs.py shows the build is still failing with -Os everywhere except for x86_64, x86 and s390x. There are a variety of different build failures, but the most common seem to be in strcoll / wcscoll, similar to existing such cases where DIAG_* are used to disable -Wmaybe-uninitialized. There are various different failures even within those functions. This patch fixes one particular case that seems quite common, where the warning appears at the declarations of seq1 and seq2. Tested with build-many-glibcs.py that this fixes the -Os build for aarch64-linux-gnu with GCC 7. * string/strcoll_l.c: Include <libc-diag.h>. (STRCOLL): Ignore -Wmaybe-uninitialized for -Os around declarations of seq1 and seq2.
2018-02-15Use libc_hidden_* for argz_next, __argz_next (bug 15105).Joseph Myers
Among other localplt test failures when building with -Os, there are libc.so PLT references for argz_next and __argz_next. This is a simple case of functions that are inlined for -O2 but not for -Os; this patch adds libc_hidden_proto / libc_hidden_def for them to avoid localplt failures even when not inlined. Tested for x86_64 (both that it removes these particular localplt failures for -Os - but other such failures remain so the bug can't yet be closed - and that the testsuite continues to pass without -Os). [BZ #15105] * include/argz.h (argz_next): Use libc_hidden_proto. (__argz_next): Likewise. * string-argz-next.c (__argz_next): Use libc_hidden_def. (argz_next): Use libc_hidden_weak.
2018-02-06Unify and simplify bits/byteswap.h, bits/byteswap-16.h headers (bug 14508, ↵Joseph Myers
bug 15512, bug 17082, bug 20530). We have a general principle of preferring optimizations for library facilities to use compiler built-in functions rather than being located in library headers, where the compiler can reasonably optimize code without needing to know glibc implementation details. This patch applies this principle to bits/byteswap.h, eliminating all the architecture-specific variants and bits/byteswap-16.h. The __bswap_16, __bswap_32 and __bswap_64 interfaces all become inline functions, never macros, using the GCC built-in functions where available and otherwise a single architecture-independent definition using shifts and masking (which compilers may well be able to detect and optimize; GCC has detection of various byte-swapping idioms). The __bswap_constant_32 macro needs to stay around because of uses in static initializers within glibc and its tests, and so for consistency all __bswap_constant_* are kept rather than just being inlined into the old-GCC-or-non-GCC parts of the __bswap_* inline function definitions. Various open bugs are addressed by this cleanup, with caveats about exactly what is covered by those bugs and when the bugs applied at all. Bug 14508 reports -Wformat warnings building glibc because __bswap_* sometimes returned the wrong types. Obviously we already don't have such warnings any more or the build would be failing, given -Werror, and I suspect that bug was originally for wrong types for x86_64, as fixed by commit d394eb742a3565d7fe7a4b02710a60b5f219ee64 (glibc 2.17). The only case I saw removed by this patch where the types would still have been wrong was the non-__GNUC__ case of __bswap_64 in the s390 header (using unsigned long long int, but uint64_t would be unsigned long int for 64-bit). In any case, the single header consistently uses __uintN_t types after this patch, thereby eliminating all such bugs. The existing string/test-endian-types.c test already suffices to verify that the types are correct with the compiler used to build glibc and its tests. Bug 15512 reports an error from __bswap_constant_16 with -Werror -Wsign-conversion. I am unable to reproduce this with any GCC version supporting -Wsign-conversion - all seem to be able to avoid warning for ((x) >> 8) & 0xffu, where x is uint16_t, which while it formally does involve an implicit conversion from int to unsigned int, is also a case where it should be easy for the compiler to see that the value converted is never negative. But in this patch __bswap_constant_16 is changed to use signed 0xff so that no such implicit conversion occurs at all, and a test with -Werror -Wsign-conversion is added. Bug 17082 objects to the use of ({}) statement expressions in these macros preventing use at file scope (in C, that's in sizeof etc.; in C++, more generally in static initializers). The particular case of these interfaces is fixed by this patch as it changes them to inline functions, eliminating all uses of ({}) in bits/byteswap.h, and a corresponding testcase is added. The bug tries to raise a more general policy question about use of ({}) in macros in installed headers, referring to "many other libc functions" (unspecified which functions are being considered). Since such policy questions belong on libc-alpha, and since there *are* macros in installed headers which can't really avoid using ({}) (where they are type-generic, so can't use an inline function, but need a temporary variable, and a few where the interface involves returning memory from alloca so can't use an inline function either), I propose to consider that bug fixed with this change. That is without prejudice to any other new bugs anyone wishes to file *for precisely defined sets of macros* requesting moving away from ({}) *where it is clearly possible for those interfaces*. Where ({}) can be avoided, typically by use of an inline function, I think that's a good idea - that inline functions are typically to be preferred to ({}) for header interfaces where such optimizations are useful but the interface is suited to being defined using an inline function. Bug 20530 requests use of __builtin_bswap16 when available (GCC 4.8 and later), which this patch implements. Tested for x86_64, and with build-many-glibcs.py. Also did an x86_64 test with the __GNUC_PREREQ conditionals changed to "#if 0" to verify the old-GCC/non-GCC case in the headers. (There are already existing tests for correctness of results of these interfaces.) [BZ #14508] [BZ #15512] [BZ #17082] [BZ #20530] * bits/byteswap.h: Update file comment. Do not include <bits/byteswap-16.h>. (__bswap_constant_16): Cast result to __uint16_t. Use signed 0xff constant. (__bswap_16): Define as inline function. (__bswap_constant_32): Reformat definition. (__bswap_32): Always define as inline function, not macro, using __uint32_t. Use __builtin_bswap32 if [__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_32. (__bswap_constant_64): Reformat definition. Do not use __extension__ here. (__bswap_64): Always define as inline function, not macro. Use __extension__ on function definition. Use __builtin_bswap64 if [__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_64. * string/test-endian-file-scope.c: New file. * string/test-endian-sign-conversion.c: Likewise. * string/Makefile (headers): Remove bits/byteswap-16.h. (tests): Add test-endian-file-scope and test-endian-sign-conversion. (CFLAGS-test-endian-sign-conversion.c): New variable. * bits/byteswap-16.h: Remove file. * sysdeps/ia64/bits/byteswap-16.h: Likewise. * sysdeps/ia64/bits/byteswap.h: Likewise. * sysdeps/m68k/bits/byteswap.h: Likewise. * sysdeps/s390/bits/byteswap-16.h: Likewise. * sysdeps/s390/bits/byteswap.h: Likewise. * sysdeps/tile/bits/byteswap.h: Likewise. * sysdeps/x86/bits/byteswap-16.h: Likewise. * sysdeps/x86/bits/byteswap.h: Likewise.
2018-02-06Move string/testcopy.c to test-driver.c and xmalloc (bug 19667).Joseph Myers
Bug 19667 reports unchecked malloc calls in the test string/testcopy.c. This patch makes that test use xmalloc and the support/test-driver.c test framework. Tested for x86_64. [BZ #19667] * string/testcopy.c: Include <support/support.h>. Do not include <malloc.h>. Use <support/test-driver.c>. (main): Rename to do_test. Make static. Use xmalloc instead of malloc.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-12-18Disable strncat test array-bounds warnings for GCC 8.Joseph Myers
Some strncat tests fail to build with GCC 8 because of -Warray-bounds warnings. These tests are deliberately test over-large size arguments passed to strncat, and already disable -Wstringop-overflow warnings, but now the warnings for these tests come under -Warray-bounds so that option needs disabling for them as well, which this patch does (with an update on the comments; the DIAG_IGNORE_NEEDS_COMMENT call for -Warray-bounds doesn't need to be conditional itself, because that option is supported by all versions of GCC that can build glibc). Tested compilation with build-many-glibcs.py for aarch64-linux-gnu. * string/tester.c (test_strncat): Also disable -Warray-bounds warnings for two tests.
2017-12-11string: Replace = with += in CFLAGS-xxx.cH.J. Lu
Replace = with += in CFLAGS-xxx.c to allow Makefile under sysdeps to define CFLAGS-xx.c. * string/Makefile (CFLAGS-inl-tester.c): Replace = with +=. (CFLAGS-noinl-tester.c): Likewise. (CFLAGS-tst-strlen.c): Likewise. (CFLAGS-stratcliff.c): Likewise. (CFLAGS-test-ffs.c): Likewise. (CFLAGS-tst-inlcall.c): Likewise. (CFLAGS-tst-xbzero-opt.c): Likewise. (CFLAGS-memcpy.c): Likewise. (CFLAGS-wordcopy.c): Likewise.
2017-11-14Fix string/tester.c build with GCC 8.Joseph Myers
GCC 8 warns about more cases of string functions truncating their output or not copying a trailing NUL byte. This patch fixes testsuite build failures caused by such warnings in string/tester.c. In general, the warnings are disabled around the relevant calls using DIAG_* macros, since the relevant cases are being deliberately tested. In one case, the warning is with -Wstringop-overflow= instead of -Wstringop-truncation; in that case, the conditional is __GNUC_PREREQ (7, 0) (being the version where -Wstringop-overflow= was introduced), to allow the conditional to be removed sooner, since it's harmless to disable the warning for a GCC version where it doesn't actually occur. In the case of warnings for strncpy calls in test_memcmp, the calls in question are changed to use memcpy, as they don't copy a trailing NUL and the point of that code is to test memcmp rather than strncpy. Tested (compilation) with GCC 8 for x86_64-linux-gnu with build-many-glibcs.py (in conjunction with Martin's patch to allow glibc to build). * string/tester.c (test_stpncpy): Disable -Wstringop-truncation for stpncpy calls for GCC 8. (test_strncat): Disable -Wstringop-truncation warning for strncat calls for GCC 8. Disable -Wstringop-overflow= warning for one strncat call for GCC 7. (test_strncpy): Disable -Wstringop-truncation warning for strncpy calls for GCC 8. (test_memcmp): Use memcpy instead of strncpy for calls not copying trailing NUL.
2017-11-14Fix string/bug-strncat1.c build with GCC 8.Joseph Myers
GCC 8 warns about strncat calls with truncated output. string/bug-strncat1.c tests such a call; this patch disables the warning for it. Tested (compilation) with GCC 8 for x86_64-linux-gnu with build-many-glibcs.py (in conjunction with Martin's patch to allow glibc to build). * string/bug-strncat1.c: Include <libc-diag.h>. (main): Disable -Wstringop-truncation for strncat call for GCC 8.
2017-10-30ffsl, ffsll: Declare under __USE_MISC, not just __USE_GNUFlorian Weimer
Recent BSDs declare these functions, too.
2017-10-01Hide internal __strsep function [BZ #18822]H.J. Lu
Hide internal __strsep function to allow direct access within libc.so and libc.a without using GOT nor PLT. [BZ #18822] * include/string.h (__strsep): Add libc_hidden_proto. * string/strsep.c (__strsep): Add libc_hidden_def.
2017-08-23string/stratcliff.c: Replace int with size_t [BZ #21982]H.J. Lu
Fix GCC 7 errors when string/stratcliff.c is compiled with -O3: stratcliff.c: In function ‘do_test’: cc1: error: assuming signed overflow does not occur when assuming that (X - c) <= X is always true [-Werror=strict-overflow] [BZ #21982] * string/stratcliff.c (do_test): Declare size, nchars, inner, middle and outer with size_t instead of int. Repleace %d and %Zd with %zu in printf. Update "MAX (0, nchars - 128)" and "MAX (outer, nchars - 64)" to support unsigned outer and nchars. Also exit loop when outer == 0.
2017-08-18Mark internal argz functions with attribute_hidden [BZ #18822]H.J. Lu
Move internal argz function prototypes to include/argz.h and mark them with attribute_hidden to allow direct access within libc.so and libc.a without using GOT nor PLT. This also brings string/argz.h closer to the gnulib version. [BZ #18822] * include/argz.h (__argz_create_sep): New function prototype. (__argz_append): Likewise. (__argz_add): Likewise. (__argz_add_sep): Likewise. (__argz_delete): Likewise. (__argz_insert): Likewise. (__argz_replace): Likewise. * string/argz.h (__argz_create_sep): Removed. (__argz_append): Likewise. (__argz_add): Likewise. (__argz_add_sep): Likewise. (__argz_delete): Likewise. (__argz_insert): Likewise. (__argz_replace): Likewise.
2017-08-08Do not use __ptr_t.Joseph Myers
sys/cdefs.h has a macro __ptr_t, which a few places in glibc use instead of void *. void * is a well-understood standard type for that purpose and in a post-C89 context there is no need for a macro for it; this patch changes those places to use void * directly instead. Unlike __long_double_t, __ptr_t is widely used outside glibc (or at least has many hits on codesearch.debian.net). I don't know how many of those uses would break if sys/cdefs.h ceased to define the macro, but there's enough risk that this patch leaves the definition and just removes the uses within glibc; removal of the definition can be considered separately if desired. Tested for x86_64, and with build-many-glibcs.py. * malloc/mcheck.c (old_free_hook): Use void * instead of __ptr_t. (old_malloc_hook): Likewise. (old_memalign_hook): Likewise. (old_realloc_hook): Likewise. (struct hdr): Likewise. (flood): Likewise. (freehook): Likewise. (mallochook): Likewise. (memalignhook): Likewise. (reallochook): Likewise. (mprobe): Likewise. * malloc/mtrace.c (mallwatch): Likewise. (tr_old_free_hook): Likewise. (tr_old_malloc_hook): Likewise. (tr_old_realloc_hook): Likewise. (tr_old_memalign_hook): Likewise. (tr_where): Likewise. (lock_and_info): Likewise. (tr_freehook): Likewise. (tr_mallochook): Likewise. (tr_reallochook): Likewise. (tr_memalignhook): Likewise. * misc/err.h [!__GNUC_VA_LIST] (__gnuc_va_list): Likewise. * misc/mmap.c (__mmap): Likewise. * misc/mmap64.c (__mmap64): Likewise. * misc/mprotect.c (__mprotect): Likewise. * misc/msync.c (msync): Likewise. * misc/munmap.c (__munmap): Likewise. * posix/posix_madvise.c (posix_madvise): Likewise. * socket/send.c (__send): Likewise. * socket/sendto.c (__sendto): Likewise. * socket/setsockopt.c (__setsockopt): Likewise. * string/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * string/memrchr.c (__ptr_t): Remove macro. (__memrchr): Use void * instead of ptr_t. * sysdeps/mach/hurd/dl-sysdep.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap.c (__mmap): Likewise. * sysdeps/mach/hurd/mmap64.c (__mmap64): Likewise. * sysdeps/mach/mprotect.c (__mprotect): Likewise. * sysdeps/mach/msync.c (msync): Likewise. * sysdeps/mach/munmap.c (__munmap): Likewise. * sysdeps/mips/bits/setjmp.h (struct __jmp_buf_internal_tag): Likewise. * sysdeps/posix/getcwd.c (__getcwd): Likewise. * sysdeps/powerpc/powerpc32/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc32/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc32/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power4/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power4/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power6/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power6/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power7/memcpy.S (memcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/mempcpy.S (__mempcpy): Likewise. * sysdeps/powerpc/powerpc64/power7/memset.S (memset): Likewise. * sysdeps/powerpc/powerpc64/power8/memset.S (memset): Likewise. * sysdeps/tile/memcmp.c (__ptr_t): Remove macro. (MEMCMP): Use void * instead of ptr_t. * sysdeps/unix/sysv/linux/alpha/oldglob.c (old_glob_t): Likewise. * sysdeps/unix/sysv/linux/mmap.c (__mmap): Likewise.
2017-07-06Increase some test timeouts.Joseph Myers
This patch increases the timeouts for some tests that I've seen timing out on slow systems in my 2.26 release testing. (In the case of tst-tsearch.c, increasing the timeout means removing a setting of 10 that was put there before the default timeout was increased to 20 seconds, so putting the default into effect.) * iconvdata/tst-loading.c (TIMEOUT): Define to 30. * misc/tst-tsearch.c (TIMEOUT): Remove. * nptl/tst-create-detached.c (TIMEOUT): Define to 100. * nptl/tst-robust-fork.c (TIMEOUT): Likewise. * nptl/tst-rwlock19.c (TIMEOUT): Likewise. * string/tst-cmp.c (TIMEOUT): Define to 600.
2017-06-23x86-64: memcmp-avx2-movbe.S needs saturating subtraction [BZ #21662]Florian Weimer
This code: L(between_2_3): /* Load as big endian with overlapping loads and bswap to avoid branches. */ movzwl -2(%rdi, %rdx), %eax movzwl -2(%rsi, %rdx), %ecx shll $16, %eax shll $16, %ecx movzwl (%rdi), %edi movzwl (%rsi), %esi orl %edi, %eax orl %esi, %ecx bswap %eax bswap %ecx subl %ecx, %eax ret needs a saturating subtract because the full register is used. With this commit, only the lower 24 bits of the register are used, so a regular subtraction suffices. The test case change adds coverage for these kinds of bugs.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:54:42 +0000