| Age | Commit message (Collapse) | Author |
|---|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This test depends on the "last" function being called in a
different thread than the "first" function, as "last" posts
a semaphore that "first" is waiting on. However, if pthread_create
fails - for example, if running in an older container before
the clone3()-in-container-EPERM fixes - exit() is called in the
same thread as everything else, the semaphore never gets posted,
and first hangs.
The fix is to pre-post that semaphore before a single-threaded
exit.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
|
|
Abort in the unlikely event that allocation fails when trying to
register a TLS destructor.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
It is defined in malloc, so it belongs there. Verified on x86_64 that
the built libraries are identical despite this change.
|
|
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
To help detect common kinds of memory (and other resource) management
bugs, GCC 11 adds support for the detection of mismatched calls to
allocation and deallocation functions. At each call site to a known
deallocation function GCC checks the set of allocation functions
the former can be paired with and, if the two don't match, issues
a -Wmismatched-dealloc warning (something similar happens in C++
for mismatched calls to new and delete). GCC also uses the same
mechanism to detect attempts to deallocate objects not allocated
by any allocation function (or pointers past the first byte into
allocated objects) by -Wfree-nonheap-object.
This support is enabled for built-in functions like malloc and free.
To extend it beyond those, GCC extends attribute malloc to designate
a deallocation function to which pointers returned from the allocation
function may be passed to deallocate the allocated objects. Another,
optional argument designates the positional argument to which
the pointer must be passed.
This change is the first step in enabling this extended support for
Glibc.
|
|
Keep __exit_funcs_lock almost all the time and unlock it only to execute
callbacks. This fixed two issues.
1. f->func.cxa was modified outside the lock with rare data race like:
thread 0: __run_exit_handlers unlock __exit_funcs_lock
thread 1: __internal_atexit locks __exit_funcs_lock
thread 0: f->flavor = ef_free;
thread 1: sees ef_free and use it as new
thread 1: new->func.cxa.fn = (void (*) (void *, int)) func;
thread 1: new->func.cxa.arg = arg;
thread 1: new->flavor = ef_cxa;
thread 0: cxafct = f->func.cxa.fn; // it's wrong fn!
thread 0: cxafct (f->func.cxa.arg, status); // it's wrong arg!
thread 0: goto restart;
thread 0: call the same exit_function again as it's ef_cxa
2. Don't unlock in main while loop after *listp = cur->next. If *listp
is NULL and __exit_funcs_done is false another thread may fail in
__new_exitfn on assert (l != NULL):
thread 0: *listp = cur->next; // It can be the last: *listp = NULL.
thread 0: __libc_lock_unlock
thread 1: __libc_lock_lock in __on_exit
thread 1: __new_exitfn
thread 1: if (__exit_funcs_done) // false: thread 0 isn't there yet.
thread 1: l = *listp
thread 1: moves one and crashes on assert (l != NULL);
The test needs multiple iterations to consistently fail without the fix.
Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=27749
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
|
|
No new symbol version is required because there was a forwarder.
The symbol has been moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add a new function support_capture_subprogram_self_sgid that spawns an
sgid child of the running program with its own image and returns the
exit code of the child process. This functionality is used by at
least three tests in the testsuite at the moment, so it makes sense to
consolidate.
There is also a new function support_subprogram_wait which should
provide simple system() like functionality that does not set up file
actions. This is useful in cases where only the return code of the
spawned subprocess is interesting.
This patch also ports tst-secure-getenv to this new function. A
subsequent patch will port other tests. This also brings an important
change to tst-secure-getenv behaviour. Now instead of succeeding, the
test fails as UNSUPPORTED if it is unable to spawn a setgid child,
which is how it should have been in the first place.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
UNREGISTER_ATFORK is now defined for all ports in register-atfork.h, so most
previous includes of fork.h actually only need register-atfork.h now, and
cxa_finalize.c does not need an ifdef UNREGISTER_ATFORK any more.
The nptl-specific fork generation counters can then go to pthreadP.h, and
fork.h be removed.
Checked on x86_64-linux-gnu and i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
GNU/Hurd's readlink system call is partly implemented in userspace, which
also allocates a buffer on the stack for the result, and thus needs one
more path.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Old implementation of realpath allocates a PATH_MAX using alloca for
each symlink in the path, leading to MAXSYMLINKS times PATH_MAX
maximum stack usage.
The test create a symlink with __eloop_threshold() loops and creates
a thread with minimum stack size (obtained through
support_small_stack_thread_attribute). The thread issues a stack
allocations that fill the thread allocated stack minus some slack
plus and the realpath usage (which assumes a bounded stack usage).
If realpath uses more than about 2 * PATH_MAX plus some slack it
triggers a stackoverflow.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
POSIX states that system returned code for failure to execute the shell
shall be as if the shell had terminated using _exit(127). This
behaviour was removed with 5fb7fc96350575.
Checked on x86_64-linux-gnu.
|
|
[BZ #24970]
It sync with gnulib version ae9fb3d66. The testcase for BZ#23741
(stdlib/test-bz22786.c) is adjusted to check also for ENOMEM.
The patch fixes multiple realpath issues:
- Portability fixes for errno clobbering on free (BZ#10635). The
function does not call free directly anymore, although it might be
done through scratch_buffer_free. The free errno clobbering is
being tracked by BZ#17924.
- Pointer arithmetic overflows in realpath (BZ#26592).
- Realpath cyclically call __alloca(path_max) to consume too much
stack space (BZ#26341).
- Realpath mishandles EOVERFLOW; stat not needed anyway (BZ#24970).
The check is done through faccessat now.
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Use __builtin_dynamic_object_size in the remaining functions that
don't have compiler builtins as is the case for string functions.
|
|
The len variable is only used in the else branch.
We don't need the call to strlen if the name is 0 or 1 characters long.
2019-10-02 Lode Willems <Lode.Willems@UGent.be>
* tdlib/getenv.c: Move the call to strlen into the branch it's used.
|
|
inttypes.h has inline implementations of the strtoimax, strtoumax,
wcstoimax and wcstoumax functions, despite the corresponding stdlib.h
and wchar.h inlines having been removed in 2007 (commit
9b2e9577b228350b15d88303b00097dd58e8d29b).
Remove those inlines, thereby eliminating all references to the
corresponding __*_internal functions from installed headers (so they
could be made into compat symbols in future if desired).
Tested for x86_64 and x86.
|
|
|
|
The functions strtoimax, strtoumax, wcstoimax, wcstoumax currently
have three implementations each (wordsize-32, wordsize-64 and dummy
implementation in stdlib/ using #error), defining the functions as
thin wrappers round corresponding *_internal functions. Simplify the
code by changing them into aliases of functions such as strtol and
wcstoull. This is more consistent with how e.g. imaxdiv is handled.
Tested for x86_64 and x86.
|
|
This reverts commit d5afb38503. The log files are actually created by the
various shell scripts that drive the tests.
|
|
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
|
|
Bug 26137 reports spurious "inexact" exceptions from strtod, on 32-bit
systems only, for a decimal argument that is exactly 1 + 2^-32. In
fact the same issue also appears for 1 + 2^-64 and 1 + 2^-96 as
arguments to strtof128 on 32-bit systems, and 1 + 2^-64 as an argument
to strtof128 on 64-bit systems. In FE_DOWNWARD or FE_TOWARDZERO mode,
the return value is also incorrect.
The problem is in the multiple-precision division logic used in the
case of dividing by a denominator that occupies at least three GMP
limbs. There was a comment "The division does not work if the upper
limb of the two-limb mumerator is greater than the denominator.", but
in fact there were problems for the case of equality (that is, where
the high limbs are equal, offset by some multiple of the GMP limb
size) as well. In such cases, the code used "quot = ~(mp_limb_t) 0;"
(with subsequent correction if that is an overestimate), because
udiv_qrnnd does not support the case of equality, but it's possible
for the shifted numerator to be greater than or equal to the
denominator, in which case that is an underestimate. To avoid that,
this patch changes the ">" condition to ">=", meaning the first
division is done with a zero high word.
The tests added are all 1 + 2^-n for n from 1 to 113 except for those
that were already present in tst-strtod-round-data.
Tested for x86_64 and x86.
|
|
On other platforms, RAND_MAX (which is the range of rand(3))
may differ from 2^31-1 (which is the range of random(3)).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The function mbstowcs, by an XSI extension to POSIX, accepts a null
pointer for the destination wchar_t array. This API behaviour allows
you to use the function to compute the length of the required wchar_t
array i.e. does the conversion without storing it and returns the
number of wide characters required.
We remove the __write_only__ markup for the first argument because it
is not true since the destination may be a null pointer, and so the
length argument may not apply. We remove the markup otherwise the new
test case cannot be compiled with -Werror=nonnull.
We add a new test case for mbstowcs which exercises the destination is
a null pointer behaviour which we have now explicitly documented.
The mbsrtowcs and mbsnrtowcs behave similarly, and mbsrtowcs is
documented as doing this in C11, even if the standard doesn't come out
and call out this specific use case. We add one note to each of
mbsrtowcs and mbsnrtowcs to call out that they support a null pointer
for the destination.
The wcsrtombs function behaves similarly but in the other way around
and allows you to use a null destination pointer to compute how many
bytes you would need to convert the wide character input. We document
this particular case also, but leave wcsnrtombs as a references to
wcsrtombs, so the reader must still read the details of the semantics
for wcsrtombs.
|
|
Adds the access attribute newly introduced in GCC 10 to the subset of
function declarations that are already covered by _FORTIFY_SOURCE and
that don't have corresponding GCC built-in equivalents.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
This patch removes the IEEE_DOUBLE_BIG_ENDIAN and
IEEE_DOUBLE_MIXED_ENDIAN macros from gmp-impl.h and gmp-mparam.h, and
the ieee_double_extract union from gmp-impl.h. The macros were used
only in defining the union, which was used nowhere in glibc. As GMP's
gmp-impl.h is over 5000 lines, the file in glibc is so far from the
GMP version that it doesn't seem to make sense to keep things there
that are not relevant in glibc. (I expect there is plenty more in the
header after this patch that is also not relevant in glibc and can be
cleaned up later.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
|
|
This patch adds the GRND_INSECURE constant from Linux 5.6 to glibc's
sys/random.h. This is also added to the documentation. The constant
acts as a no-op for the Hurd implementation (as that doesn't check
whether the flags are known), which is semantically fine, while older
Linux kernels reject unknown flags with an EINVAL error.
Tested for x86_64.
|
|
Fix some issues with different shell and error messages.
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
It fixes 5fb7fc9635 when posix_spawn fails.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
simple test such as below was failing.
| void main(int argc, char *argv[])
| {
| size_t total_time = 115424; // expected 115.424
| double secs = (double)total_time/(double)1000;
| printf("%s %d %lf\n", "secs", total_time, secs); // prints 113.504
| printf("%d\n", (size_t)secs);
| }
The printf eventually called into glibc stdlib/divrem.c:__mpn_divrem()
which uses the __arc__ specific inline asm macros from longlong.h which
were causing miscompilation.
include/
2019-03-28 Vineet Gupta <vgupta@synopsys.com>
PR 89877
* longlong.h [__arc__] (add_ssaaaa): Add cc clobber
(sub_ddmmss): Likewise.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
All functions that have a format string, which can consume a long double
argument, must have one version for each long double format supported on
a platform. On powerpc64le, these functions currently have two versions
(i.e.: long double with the same format as double, and long double with
IBM Extended Precision format). Support for a third long double format
option (i.e. long double with IEEE long double format) is being prepared
and all the aforementioned functions now have a third version (not yet
exported on the master branch, but the code is in).
For these functions to get selected (during build time), references to
them in user programs (or dependent libraries) must get redirected to
the aforementioned new versions of the functions. This patch installs
the header magic required to perform such redirections.
Notice, however, that since the redirections only happen when
__LONG_DOUBLE_USES_FLOAT128 is set to 1, and no platform (including
powerpc64le) currently does it, no redirections actually happen.
Redirections and the exporting of the new functions will happen at the
same time (when powerpc64le adds ldbl-128ibm-compat to their Implies.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
|
|
The namespace pollution results in conform test failures if the tests
are run __USE_EXTERN_INLINES defined (e.g., when configuring with
CC="gcc -O3" CXX="g++ -O3").
|
|
|
|
* include/sys/random.h (__getrandom): Add hidden prototype.
* stdlib/getrandom.c (getrandom): Rename to hidden definition __getrandom.
Add weak alias.
* sysdeps/mach/hurd/getrandom.c (getrandom): Likewise.
* sysdeps/unix/sysv/linux/getrandom.c (getrandom): Likewise.
* sysdeps/mach/hurd/getentropy.c (getentropy): Use __getrandom instead of
getrandom.
|
|
Since commit a3cc4f48e94f32c9532ee36982ac00eb1e5719b0 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
|
|
Similarly to what has been done for printf-like functions, more
specifically to the internal implementation in __vfprintf_internal, this
patch extends __vstrfmon_l_internal to deal with long double values with
binary128 format (as a third format option and reusing the float128
implementation).
Tested for powerpc64le, powerpc64, x86_64, and with build-many-glibcs.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
|
|
C2X adds the interfaces from TS 18661-1, and all except a handful in
Annex F are unconditionally visible in C2X rather than only visible
when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates
glibc headers accordingly: most uses of __GLIBC_USE
(IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE
(IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the
type-generic macros in tgmath.h will go away when the functions are
changed to take pointer arguments.)
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update
comment.
(__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)].
* include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE
(IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise, except for totalorder, totalordermag, getpayload,
setpayload and setpayloadsig.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise,
except for totalorder and totalordermag.
|
|
As discussed previously on libc-alpha [1], this patch follows up the idea
and add both the __attribute_alloc_size__ on malloc functions (malloc,
calloc, realloc, reallocarray, valloc, pvalloc, and memalign) and limit
maximum requested allocation size to up PTRDIFF_MAX (taking into
consideration internal padding and alignment).
This aligns glibc with gcc expected size defined by default warning
-Walloc-size-larger-than value which warns for allocation larger than
PTRDIFF_MAX. It also aligns with gcc expectation regarding libc and
expected size, such as described in PR#67999 [2] and previously discussed
ISO C11 issues [3] on libc-alpha.
From the RFC thread [4] and previous discussion, it seems that consensus
is only to limit such requested size for malloc functions, not the system
allocation one (mmap, sbrk, etc.).
The implementation changes checked_request2size to check for both overflow
and maximum object size up to PTRDIFF_MAX. No additional checks are done
on sysmalloc, so it can still issue mmap with values larger than
PTRDIFF_T depending on the requested size.
The __attribute_alloc_size__ is for functions that return a pointer only,
which means it cannot be applied to posix_memalign (see remarks in GCC
PR#87683 [5]). The runtimes checks to limit maximum requested allocation
size does applies to posix_memalign.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://sourceware.org/ml/libc-alpha/2018-11/msg00223.html
[2] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=67999
[3] https://sourceware.org/ml/libc-alpha/2011-12/msg00066.html
[4] https://sourceware.org/ml/libc-alpha/2018-11/msg00224.html
[5] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87683
[BZ #23741]
* malloc/hooks.c (malloc_check, realloc_check): Use
__builtin_add_overflow on overflow check and adapt to
checked_request2size change.
* malloc/malloc.c (__libc_malloc, __libc_realloc, _mid_memalign,
__libc_pvalloc, __libc_calloc, _int_memalign): Limit maximum
allocation size to PTRDIFF_MAX.
(REQUEST_OUT_OF_RANGE): Remove macro.
(checked_request2size): Change to inline function and limit maximum
requested size to PTRDIFF_MAX.
(__libc_malloc, __libc_realloc, _int_malloc, _int_memalign): Limit
maximum allocation size to PTRDIFF_MAX.
(_mid_memalign): Use _int_memalign call for overflow check.
(__libc_pvalloc): Use __builtin_add_overflow on overflow check.
(__libc_calloc): Use __builtin_mul_overflow for overflow check and
limit maximum requested size to PTRDIFF_MAX.
* malloc/malloc.h (malloc, calloc, realloc, reallocarray, memalign,
valloc, pvalloc): Add __attribute_alloc_size__.
* stdlib/stdlib.h (malloc, realloc, reallocarray, valloc): Likewise.
* malloc/tst-malloc-too-large.c (do_test): Add check for allocation
larger than PTRDIFF_MAX.
* malloc/tst-memalign.c (do_test): Disable -Walloc-size-larger-than=
around tests of malloc with negative sizes.
* malloc/tst-posix_memalign.c (do_test): Likewise.
* malloc/tst-pvalloc.c (do_test): Likewise.
* malloc/tst-valloc.c (do_test): Likewise.
* malloc/tst-reallocarray.c (do_test): Replace call to reallocarray
with resulting size allocation larger than PTRDIFF_MAX with
reallocarray_nowarn.
(reallocarray_nowarn): New function.
* NEWS: Mention the malloc function semantic change.
|
|
This test would fail unnecessarily if the user running it had more than
64 groups since getgroups returns EINVAL if the size provided is less
than the number of supplementary group IDs. Instead dynamically
determine the number of supplementary groups the user has.
|
|
inttypes.h and stdint.h are in sysdeps/generic, but there are no other
versions of these headers anywhere in the source tree, so they aren’t
actually system-dependent. Move them to the subdirectory that
installs them (stdlib).
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/inttypes.h, sysdeps/generic/stdint.h:
Move to stdlib.
* include/inttypes.h: Adjust to match.
* include/stdint.h: New wrapper.
|
|
This patch fixes various places where a space should have been present
before '(' in accordance with the GNU Coding Standards. Most but not
all of the fixes in this patch are for calls to sizeof (but it's not
exhaustive regarding such calls that should be fixed).
Tested for x86_64, and with build-many-glibcs.py.
* benchtests/bench-strcpy.c (do_test): Use space before '('.
* benchtests/bench-string.h (cmdline_process_function): Likewise.
* benchtests/bench-strlen.c (do_test): Likewise.
(test_main): Likewise.
* catgets/gencat.c (read_old): Likewise.
* elf/cache.c (load_aux_cache): Likewise.
* iconvdata/bug-iconv8.c (do_test): Likewise.
* math/test-tgmath-ret.c (do_test): Likewise.
* nis/nis_call.c (rec_dirsearch): Likewise.
* nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise.
* nptl/tst-audit-threads.c (do_test): Likewise.
* nptl/tst-cancel4-common.h (set_socket_buffer): Likewise.
* nss/nss_test1.c (init): Likewise.
* nss/test-netdb.c (test_hosts): Likewise.
* posix/execvpe.c (maybe_script_execute): Likewise.
* stdio-common/tst-fmemopen4.c (do_test): Likewise.
* stdio-common/tst-printf.c (do_test): Likewise.
* stdio-common/vfscanf-internal.c (__vfscanf_internal): Likewise.
* stdlib/fmtmsg.c (NKEYWORDS): Likewise.
* stdlib/qsort.c (STACK_SIZE): Likewise.
* stdlib/test-canon.c (do_test): Likewise.
* stdlib/tst-swapcontext1.c (do_test): Likewise.
* string/memcmp.c (OPSIZ): Likewise.
* string/test-strcpy.c (do_test): Likewise.
(do_random_tests): Likewise.
* string/test-strlen.c (do_test): Likewise.
(test_main): Likewise.
* string/test-strrchr.c (do_test): Likewise.
(do_random_tests): Likewise.
* string/tester.c (test_memrchr): Likewise.
(test_memchr): Likewise.
* sysdeps/generic/memcopy.h (OPSIZ): Likewise.
* sysdeps/generic/unwind-dw2.c (execute_stack_op): Likewise.
* sysdeps/generic/unwind-pe.h (read_sleb128): Likewise.
(read_encoded_value_with_base): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_runtime_setup): Likewise.
* sysdeps/hppa/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/ia64/fpu/sfp-machine.h (TI_BITS): Likewise.
* sysdeps/mach/hurd/spawni.c (__spawni): Likewise.
* sysdeps/posix/spawni.c (maybe_script_execute): Likewise.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (query_auxv):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/bits/procfs.h (ELF_NGREG):
Likewise.
* sysdeps/unix/sysv/linux/arm/bits/procfs.h (ELF_NGREG): Likewise.
* sysdeps/unix/sysv/linux/arm/ioperm.c (init_iosys): Likewise.
* sysdeps/unix/sysv/linux/csky/bits/procfs.h (ELF_NGREG):
Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/procfs.h (ELF_NGREG):
Likewise.
* sysdeps/unix/sysv/linux/nios2/bits/procfs.h (ELF_NGREG):
Likewise.
* sysdeps/unix/sysv/linux/spawni.c (maybe_script_execute):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/procfs.h (ELF_NGREG): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/sigcontext.h
(FP_XSTATE_MAGIC2_SIZE): Likewise.
* sysdeps/x86/fpu/sfp-machine.h (TI_BITS): Likewise.
* time/test_time.c (main): Likewise.
|
|
The GNU Coding Standards specify that line breaks in expressions
should go before an operator, not after one. This patch fixes various
code to do this. It only changes code that appears to be mostly
following GNU style anyway, not files and directories with
substantially different formatting. It is not exhaustive even for
files using GNU style (for example, changes to sysdeps files are
deferred for subsequent cleanups). Some files changed are shared with
gnulib, but most are specific to glibc. Changes were made manually,
with places to change found by grep (so some cases, e.g. where the
operator was followed by a comment at end of line, are particularly
liable to have been missed by grep, but I did include cases where the
operator was followed by backslash-newline).
This patch generally does not attempt to address other coding style
issues in the expressions changed (for example, missing spaces before
'(', or lack of parentheses to ensure indentation of continuation
lines properly reflects operator precedence).
Tested for x86_64, and with build-many-glibcs.py.
* benchtests/bench-memmem.c (simple_memmem): Break lines before
rather than after operators.
* benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise.
* crypt/md5.c (md5_finish_ctx): Likewise.
* crypt/sha256.c (__sha256_finish_ctx): Likewise.
* crypt/sha512.c (__sha512_finish_ctx): Likewise.
* elf/cache.c (load_aux_cache): Likewise.
* elf/dl-load.c (open_verify): Likewise.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* elf/readelflib.c (process_elf_file): Likewise.
* elf/rtld.c (dl_main): Likewise.
* elf/sprof.c (generate_call_graph): Likewise.
* hurd/ctty-input.c (_hurd_ctty_input): Likewise.
* hurd/ctty-output.c (_hurd_ctty_output): Likewise.
* hurd/dtable.c (reauth_dtable): Likewise.
* hurd/getdport.c (__getdport): Likewise.
* hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise.
* hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise.
* hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise):
Likewise.
* hurd/hurdioctl.c (fioctl): Likewise.
* hurd/hurdselect.c (_hurd_select): Likewise.
* hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise.
(STOPSIGS): Likewise.
* hurd/hurdstartup.c (_hurd_startup): Likewise.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise.
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise.
* hurd/msgportdemux.c (msgport_server): Likewise.
* hurd/setauth.c (_hurd_setauth): Likewise.
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise.
* libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise.
* locale/programs/ld-ctype.c (set_class_defaults): Likewise.
* localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise.
* login/tst-utmp.c (do_check): Likewise.
(simulate_login): Likewise.
* mach/lowlevellock.h (lll_lock): Likewise.
(lll_trylock): Likewise.
* math/test-fenv.c (ALL_EXC): Likewise.
* math/test-fenvinline.c (ALL_EXC): Likewise.
* misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise.
* nis/nis_call.c (__do_niscall3): Likewise.
* nis/nis_callback.c (cb_prog_1): Likewise.
* nis/nis_defaults.c (searchaccess): Likewise.
* nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise.
* nis/nis_ismember.c (internal_ismember): Likewise.
* nis/nis_local_names.c (nis_local_principal): Likewise.
* nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise.
* nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r):
Likewise.
* nis/ypclnt.c (yp_match): Likewise.
(yp_first): Likewise.
(yp_next): Likewise.
(yp_master): Likewise.
(yp_order): Likewise.
* nscd/hstcache.c (cache_addhst): Likewise.
* nscd/initgrcache.c (addinitgroupsX): Likewise.
* nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise.
(internal_getpwuid_r): Likewise.
* nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise.
* posix/glob.h (__GLOB_FLAGS): Likewise.
* posix/regcomp.c (peek_token): Likewise.
(peek_token_bracket): Likewise.
(parse_expression): Likewise.
* posix/regexec.c (sift_states_iter_mb): Likewise.
(check_node_accept_bytes): Likewise.
* posix/tst-spawn3.c (do_test): Likewise.
* posix/wordexp-test.c (testit): Likewise.
* posix/wordexp.c (parse_tilde): Likewise.
(exec_comm): Likewise.
* posix/wordexp.h (__WRDE_FLAGS): Likewise.
* resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise.
* setjmp/sigjmp.c (__sigjmp_save): Likewise.
* stdio-common/printf_fp.c (__printf_fp_l): Likewise.
* stdio-common/tst-fileno.c (do_test): Likewise.
* stdio-common/vfprintf-internal.c (vfprintf): Likewise.
* stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise.
* stdlib/strtod_l.c (round_and_return): Likewise.
(____STRTOF_INTERNAL): Likewise.
* stdlib/tst-strfrom.h (TEST_STRFROM): Likewise.
* string/strcspn.c (STRCSPN): Likewise.
* string/test-memmem.c (simple_memmem): Likewise.
* termios/tcsetattr.c (tcsetattr): Likewise.
* time/alt_digit.c (_nl_parse_alt_digit): Likewise.
* time/asctime.c (asctime_internal): Likewise.
* time/strptime_l.c (__strptime_internal): Likewise.
* time/sys/time.h (timercmp): Likewise.
* time/tzfile.c (__tzfile_compute): Likewise.
|
