| Age | Commit message (Collapse) | Author |
|---|
|
consistent environment.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
|
|
|
|
GNU_IFUNC are shown by readelf in 'Relocation section' value as
"symbol()" instead of expected hexadecimal value. This causes the
check-localplt script to ignore potential PLT stub begin generated
by wrong IFUNC usage. This patch changes the localplt script to
emit such PLT cases.
|
|
It makes much more sense to have all benchmarking-related scripts in a
single place away from everything else.
|
|
Implemented the benchmark script in python since it is much cleaner
and simpler to maintain.
|
|
binutils versions up through at least 2.23 have some bugs that cause
STV_HIDDEN symbols to appear in .dynsyms.
|
|
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
|
|
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
|
|
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts
the process of generating explicit PASS or FAIL status for individual
glibc tests. It's based on Tomas Dohnalek's patch
<https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is
deliberately more minimal: it doesn't try to cover any tests outside
of $(tests) / $(xtests) (that's for a later patch), nor does it put
the result together in an overall summary file (again, a later patch):
it just generates the .test-result files.
Thus, this patch keeps the overall logic for when a testsuite run
finishes completely unchanged: a test failing will terminate the run.
I think we *should* move to a more conventional approach where plain
"make check" does not terminate for an individual test failure, unless
e.g. you say "make stop-on-test-failure=y check", but that sort of
policy change is best done as a separate patch once the infrastructure
is in place to generate summary files for completed test runs (which
will entirely consist of PASS and XFAIL lines if the testsuite run
reaches the point of generating them, until such a policy change is
made).
Tested x86_64.
2014-02-14 Tomas Dohnalek <tdohnale@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* Makeconfig (test-name): New variable.
(evaluate-test): Likewise.
* Makerules (do-test-clean): Remove .test-result files.
(common-mostlyclean): Likewise.
* Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules.
* scripts/evaluate-test.sh: New file.
|
|
|
|
Update copyright years that are not handled by scripts/update-copyright.
|
|
|
|
This patch updates various miscellaneous files we take from upstream
GNU sources (texinfo.texi, config.guess, config.sub - various others
haven't changed upstream since we last updated them) to their current
upstream versions.
Tested x86_64.
* manual/texinfo.tex: Update to version 2013-11-26.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2013-11-29.
* scripts/config.sub: Update to version 2013-10-01.
|
|
`volatile int` means the same as 'int volatile', but that's not the
case for 'volatile char *' and 'char * volatile'. We won't need a
'char volatile *' or other complicated semantics for now.
|
|
This patch adds the ability to accept output arguments to functions
being benchmarked, by nesting the argument type in <> in the args
directive. It includes the sincos implementation as an example, where
the function would have the following args directive:
## args: double:<double *>:<double *>
This simply adds a definition for a static variable whose pointer gets
passed into the function, so it's not yet possible to pass something
more complicated like a pre-allocated string or array. That would be
a good feature to add if a function needs it.
The values in the input file will map only to the input arguments. So
if I had a directive like this for a function foo:
## args: int:<int *>:int:<int *>
and I have a value list like this:
1, 2
3, 4
5, 6
then the function calls generated would be:
foo (1, &out1, 2, &out2);
foo (3, &out1, 4, &out2);
foo (5, &out1, 6, &out2);
|
|
|
|
This adds the "include-sources" directive to scripts/bench.pl. This
allows for including source code (vs including headers, which might get
a different search path) after the inclusion of any headers.
|
|
This patch adds some more directives to the benchmark inputs file,
moving functionality from the Makefile and making the code generation
script a bit cleaner. The function argument and return types that
were earlier added as variables in the makefile and passed to the
script via command line arguments are now the 'args' and 'ret'
directive respectively. 'args' should be a colon separated list of
argument types (skipped if the function doesn't accept any arguments)
and 'ret' should be the return type.
Additionally, an 'includes' directive may have a comma separated list
of headers to include in the source. For example, the pow input file
now looks like this:
42.0, 42.0
1.0000000000000020, 1.5
I did this to unclutter the benchtests Makefile a bit and eventually
eliminate dependency of the tests on the Makefile and have tests
depend on their respective include files only.
|
|
|
|
|
|
|
|
Resolves: #15424
The compiler would optimize the benchmark function call out of the
loop and call it only once, resulting in blazingly fast times for some
benchmarks (notably atan, sin and cos). Mark the inputs as volatile
so that the code is forced to read again from the input for each
iteration.
|
|
Some math functions have distinct performance characteristics in
specific domains of inputs, where some inputs return via a fast path
while other inputs require multiple precision calculations, that too
at different precision levels. The way to implement different domains
was to have a separate source file and benchmark definition, resulting
in separate programs.
This clutters up the benchmark, so this change allows these domains to
be consolidated into the same input file. To do this, the input file
format is now enhanced to allow comments with a preceding # and
directives with two # at the begining of a line. A directive that
looks like:
tells the benchmark generation script that what follows is a different
domain of inputs. The value of the 'name' directive (in this case,
foo) is used in the output. The two input domains are then executed
sequentially and their results collated separately. with the above
directive, there would be two lines in the result that look like:
func(): ....
func(foo): ...
|
|
The idea to run benchmarks for a constant number of iterations is
problematic. While the benchmarks may run for 10 seconds on x86_64,
they could run for about 30 seconds on powerpc and worse, over 3
minutes on arm. Besides that, adding a new benchmark is cumbersome
since one needs to find out the number of iterations needed for a
sufficient runtime.
A better idea would be to run each benchmark for a specific amount of
time. This patch does just that. The run time defaults to 10 seconds
and it is configurable at command line:
make BENCH_DURATION=5 bench
|
|
|
|
See benchtests/Makefile to know how to use it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The tile architecture's Linux port installs headers in an
<arch> directory; these headers are in part shared with glibc.
Ignore these headers for check-local-headers like we ignore
all the other Linux headers.
|
|
|
|
|
|
sys/sdt-config.h.
|
|
|
|
|
|
|
|
|
|
Enhance scripts/list-sources.sh to search glibc-ports
for translatable strings.
|
|
* scripts/abilist.awk: Accept 8 fields. Handle Alpha functions
marked to avoid plt entry.
|
|
|
|
|
|
* scripts/data/localplt-sparc-linux-gnu.data: Add '?' markers
to quad soft-float symbols whose references are compiler
generated.
* scripts/data/localplt-sparc64-linux-gnu.data: Likewise.
|
