| Age | Commit message (Collapse) | Author |
|---|
|
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
|
|
|
|
This patch is split out of
<https://sourceware.org/pipermail/libc-alpha/2022-December/144122.html>.
atoi has undefined behavior on out-of-range input, which makes it
problematic to use anywhere in glibc that might be processing input
out-of-range for atoi but not specified to produce undefined behavior
for the function calling atoi. Change some uses of atoi to call
strtol instead; this avoids the undefined behavior, though there is no
guarantee that the overflow handling of strtol is really right in
those places either. This also serves to avoid localplt test failures
given an installed header redirection for strtol (which means that the
call from the inline atoi implementation doesn't end up at a hidden
alias from libc_hidden_proto).
Certainly, the use of atoi is questionable in argp-help.c (shared with
gnulib, so shouldn't depend on glibc implementation details, and
processing user-provided input), and maybe also in argp-parse.c (I'm
not sure what that code in argp-parse.c is meant to be used for). I
also changed inet/rexec.c and resolv/res_init.c similarly to use
strtol to avoid such localplt failures, although given those files (in
those versions) are only used in glibc it's not problematic for them
to rely on the specific behavior of glibc's atoi on out-of-range input
(in the absence of compiler optimizations based on the undefined
behavior) in the same way it's problematic for gnulib code to do so.
There may be other uses of atoi (or atol or atoll), in any of glibc's
installed code, for which it would also be appropriate to avoid the
undefined behavior on out-of-range input; this patch only fixes the
specific cases needed to avoid localplt failures.
Tested for x86_64.
|
|
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
|
|
This fixes this compiler error:
tst-resolv-invalid-cname.c: In function ‘test_mode_to_string’:
tst-resolv-invalid-cname.c:164:10: error: label at end of compound statement
case test_mode_num:
^~~~~~~~~~~~~
Fixes commit 9caf782276ecea4bc86fc94fbb52779736f3106d
("resolv: Add new tst-resolv-invalid-cname").
|
|
Introduce struct alloc_buffer to this function, and use it and
struct ns_rr_cursor in gaih_getanswer_slice. Adjust gaih_getanswer
and gaih_getanswer_noaaaa accordingly.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This test checks resolution through CNAME chains that do not contain
host names (bug 12154).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
If the name is not a host name, skip adding it to the result, instead
of reporting query failure. This fixes bug 12154 for getaddrinfo.
This commit still keeps the old parsing code, and only adjusts when
a host name is copied.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Allocate the pointer arrays only at the end, when their sizes
are known. This addresses bug 29305.
Skip over invalid names instead of failing lookups. This partially
fixes bug 12154 (for gethostbyname, fixing getaddrinfo requires
different changes).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
res_use_inet6 always returns false since commit 3f8b44be0a658266adff5
("resolv: Remove support for RES_USE_INET6 and the inet6 option").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The simplification takes advantage of the split from getanswer_r.
It fixes various aliases issues, and optimizes NSS buffer usage.
The new DNS packet parsing helpers are used, too.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
And expand the use of name_ok and qtype in getanswer_ptr (the
former also in getanswer_r).
After further cleanups, not much code will be shared between the
two functions.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The public parser functions around the ns_rr record type produce
textual domain names, but usually, this is not what we need while
parsing DNS packets within glibc. This commit adds two new helper
functions, __ns_rr_cursor_init and __ns_rr_cursor_next, for writing
packet parsers, and struct ns_rr_cursor, struct ns_rr_wire as
supporting types.
In theory, it is possible to avoid copying the owner name
into the rname field in __ns_rr_cursor_next, but this would need
more functions that work on compressed names.
Eventually, __res_context_send could be enhanced to preserve the
result of the packet parsing that is necessary for matching the
incoming UDP packets, so that this works does not have to be done
twice.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This function is useful for checking that the question name is
uncompressed (as it should be).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
During packet parsing, only the binary name is available. If the name
equality check is performed before conversion to text, we can sometimes
skip the last step.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
During package parsing, only the binary representation is available,
and it is convenient to check that directly for conformance with host
name requirements.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This avoids a compilation error:
tst-resolv-noaaaa.c: In function 'response':
tst-resolv-noaaaa.c:74:11: error: a label can only be part of a statement and a declaration is not a statement
char ipv4[4] = {192, 0, 2, i + 1};
^~~~
tst-resolv-noaaaa.c:79:11: error: a label can only be part of a statement and a declaration is not a statement
char *name = xasprintf ("ptr-%d", i);
^~~~
|
|
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
|
|
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
The structure HEADER is normally aligned to a word boundary but
sometimes it needs to be accessed when aligned on a byte boundary.
This change defines a new typedef, UHEADER, with alignment 1.
It is used to ensure the fields are accessed with byte loads and
stores when necessary.
V4: Change to res_mkquery.c deleted. Small whitespace fix.
V5: Move UHEADER typedef to resolv/resolv-internal.h. Replace all
HEADER usage with UHEADER in resolv/res_send.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The commit 737e873b30 ("resolv: Do not build libanl.so for ABIs starting
at 2.35") disabled building libanl for ports supporting only 2.35 and
later like OpenRISC.
However, the if statement was not updated quite correctly and the change
ends up disabling many tst-resolv* tests. This was not supposed to be
done and it causes test dependency errors like:
make: Entering directory 'gnu-home/glibc/resolv'
make: *** No rule to make target 'gnu-home/build-glibc/resolv/tst-resolv-res_ninit.out', needed by 'gnu-home/build-glibc/resolv/mtrace-tst-resolv-res_ninit.out'. Stop.
make: Leaving directory 'gnu-home/glibc/resolv'
This patch move the extra-libs += libanl definition and condition down
to be closer to other libanl definitions. The $(have-GLIBC_2.34)
condition now includes libanl-routines and libanl-shared-only-routines as
well.
Also, I have added a comment to endif of $(have-thread-library) to help
show the bondary of the have-thread-library definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
|
|
|
|
Replace a call to sprintf with an equivalent pair of stpcpy/strcpy calls
to avoid a GCC 12 -Wformat-overflow false positive due to recent optimizer
improvements.
|
|
It is at least "more random" than 0xffff & __getpid ();
Signed-off-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Fixes commit e1fcf21474c5b522f ("resolv: Move nss_dns into libc").
|
|
This partially fixes static-only NSS support (bug 27959): The dns
module no longer needs dlopen. Support for disabling dlopen altogher
remains to be added.
This commit introduces module_load_builtin into nss/nss_module.c, which
handles the common parts of loading the built-in nss_files and nss_dns
modules.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
No abilist updates are needed because the symbols were GLIBC_PRIVATE.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The script was used with --no-new-version to move the symbols
__res_nquery, __res_nquerydomain, __res_nsearch, __res_query,
__res_querydomain, __res_search, res_query, res_querydomain,
res_search. The public symbols res_nquery, res_nquerydomain,
res_nsearch, res_ownok, res_query, res_querydomain, res_search
were added with make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
This switches to public symbols without __ prefixes, due to improved
namespace management in glibc.
The symbols res_mkquery, __res_mkquery, __res_nmkquery were
moved with the script (using --no-new-version).
res_mkquery@@GLIBC_2.34, res_nmkquery@@GLIBC_2.34 were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Switch to public symbols without __ prefix (due to improved
namespace management).
__res_send, __res_nsend were moved using the script (with
--no-new-version). res_send@@GLIBC_2.34 and res_nsend@@GLIBC_2.34
were added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
These deprecated symbols continue to be exported from libresolv.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat it to GNU style. Remove the unecessary setbuf call.
Use __fgets_unlocked for PLT avoidance; no locking is required here.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat it to GNU style.
The treatment of this function matches res_nameinquery, for the
reasons stated there.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat to GNU style.
This deprecated function is used in the implementation of the stub
resolver (for now). Keep the public symbol in libresolv for now
(so that no new symbol version is needed), and add a forwarder to
libresolv.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
But only as an internal symbol, __libc_ns_samename. The libresolv
ABI is preserved. This is because the function is deprecated, and
it does not make sense to add new symbol versions for deprecated
functions.
Also reformat the implementation to GNU style.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
But only as an internal symbol, __libc_ns_makecanon. The libresolv
ABI is preserved. This is because the function is deprecated, and
it does not make sense to add new symbol versions for deprecated
functions.
Also reformat the implementation to GNU style.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Eliminate the use of the EXT macro from it because it does not
add clarity. The function was added to res_send.c in 2015, and
the copyright year reflects that.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
This reflects what the remaining functions in the file do.
The __res_dnok, __res_hnok, __res_mailok, __res_ownok were moved
with the script, using --no-new-version, and turned into compat
symbols. __libc_res_dnok@@GLIBC_PRIVATE and
__libc_res_hnok@@GLIBC_PRIVATE are added for internal use, to avoid
accidentally binding to compatibility symbols. The new public
symbols res_dnok, res_hnok, res_mailok, res_ownok were added using
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat it to GNU style.
dn_skipname is used outside glibc, so do not deprecate it,
and export it as dn_skipname (not __dn_skipname). Due to internal
users, provide a __libc_dn_skipname alias, and keep __dn_skipname
as a pure compatibility symbol.
__dn_skipname@GLIBC_2.0 was moved using the script, and
dn_skipname@@GLIBC_2.34 was added using make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat it to GNU style.
dn_comp is used in various programs, so keep it as a non-deprecated
symbol. Switch to dn_comp (not __dn_comp) for the ABI name. There
are no internal users, so interposition is not a problem.
The __dn_comp symbol was moved with scripts/move-symbol-to-libc.py
--no-new-version. dn_comp@@GLIBC_2.34 was added with
make update-all-abi.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat to GNU style.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
And reformat to GNU style.
This switches back to the dn_expand name for the ABI symbol and turns
__dn_expand into a compatibility symbol. With the improved namespace
management in current glibc, it is no longer necessary to use a
private namespace symbol. To avoid old code binding to a
GLIBC_PRIVATE symbol by accident, use __libc_dn_expand for the
internal symbol name.
The symbols dn_expand, __dnexpand were moved using
scripts/move-symbol-to-libc.py, followed by an adjustment to make
dn_expand the only GLIBC_2.34 symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
