| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Examining MIPS test results showed an ABI test failure that I must
have missed in 2.18 testing: hard-float and soft-float o32 no longer
have the same set of symbols (because of the __mips_fpu_getcw and
__mips_fpu_setcw functions, present for hard-float only, used by
fpu_control.h for hard-float MIPS16) and so need separate ABI test
baselines (they always were ABI-incompatible - the function-calling
interface is different - but previously had the same set of symbols
and versions so didn't need separate baselines).
Tested for hard-float and soft-float o32.
* sysdeps/unix/sysv/linux/mips/mips32/nptl/libc.abilist: Move to
....
* sysdeps/unix/sysv/linux/mips/mips32/fpu/nptl/libc.abilist:
... here.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/nptl/libc.abilist: New
file.
|
|
[BZ #16387] Fix FP_ROUNDMODE to extract the correct bits from FPCR.
|
|
|
|
|
|
Truncate the file first so as to delete old entries and to lower ULPs
for tests that have improved.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We don't want to record these test results as a good thing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This addresses a long standing collision between userspace headers and
kernel headers only on ia64 systems. All other types have a __ prefix
in the ptrace headers except these two. Let's finally namespace these.
Verified that at least strace still builds after this change, as well
as after deleting all the struct hacks it has specifically for ia64.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=762
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
All the other ptrace structures in this file have a __ prefix except this
new one. This in turn causes build problems for most packages that try to
use ptrace such as strace:
gcc -DHAVE_CONFIG_H -I. -I../.. -I../../linux/x86_64 -I../../linux \
-I./linux -Wall -Wwrite-strings -g -O2 -MT process.o -MD -MP \
-MF .deps/process.Tpo -c -o process.o ../../process.c
In file included from ../../process.c:63:0:
/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
struct ptrace_peeksiginfo_args {
^
In file included from ../../defs.h:159:0,
from ../../process.c:37:
/usr/include/sys/ptrace.h:191:8: note: originally defined here
struct ptrace_peeksiginfo_args
^
Since this struct was introduced in glibc-2.18, there shouldn't be any
real regressions with adding the __ prefix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The recent commit 7f507ee17aee720fa423fa38502bc3caa0dd03d7 added a new
local variable "offset" to tls_get_addr_tail. This conflicts with the
ia64 code which also declares an offset code inline in this func. So
have the ia64 code rename its local vars with a prefix that shouldn't
collide with anything else in the future.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The sp check has to be moved up to the start of the func since it now
makes a system call and that'll clobber a lot of registers.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=16372
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The new tst-setjmp-fp test has been failing on IA64 because the setjmp
and longjmp helpers take care of saving/restoring the fpsr register.
Per the C standards, this is incorrect, so disable that logic.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=16379
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Rather than opencode the __GI_xxx logic, use proper hidden helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Used the s390 code as a guideline until all tests pass.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This file has a few #if 0 code paths which cause a build time warning:
ports/sysdeps/unix/sysv/linux/ia64/ioperm.c:66:7: warning:
variable 'prot' set but not used [-Wunused-but-set-variable]
Rather than add more #if 0 around that variable, just delete the code
altogether. Not like it's going to ever be implemented.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Tested with:
$ cat test.c
main(){close(0x1024, 2, 3);}
$ gcc test.c
$ sotruss -e ./a.out
a.out -> libc.so.6.1 : __libc_start_main(0x4000000000000950, 0x1, 0x60000fffffb56bc8)
a.out -> libc.so.6.1 : close(0x1024, 0x2, 0x3)
a.out -> libc.so.6.1 : close - 0xffffffffffffffff
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
[BZ #15128] Ensure all argument passing registers are saved and
restored on entry to dynamic linker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fix the RLIM64_INFINITY constant for O32 and N32 ABIs to match the
kernel one. Change the getrlimit64/setrlimit64 into old compat symbols,
and provide the Linux generic getrlimit64/setrlimit64 functions as
GLIBC_2_19 version.
|
|
RLIM64_INFINITY was supposed to be a glibc convention rather than
anything seen by the kernel, but it ended being passed to the kernel
through the prlimit64 syscall. On O32 and N32 ABIs, we therefore
end-up with different values on the userland and kernel side:
* On the kernel side, the value is defined for all architectures as
include/uapi/linux/resource.h:
#define RLIM64_INFINITY (~0ULL)
* On the GNU libc side, the value is defined in
ports/sysdeps/unix/sysv/linux/mips/bits/resource.h:
For the O32 and N32 ABI:
# define RLIM64_INFINITY 0x7fffffffffffffffULL
and for the N64 ABI:
# define RLIM64_INFINITY 0xffffffffffffffffUL
This was not a problem until the prlimit64 syscall was wired in the
2.6.36 kernel. Given the GLIBC uses the prlimit64 syscall to implement
getrlimit64 and setrlimit64, pam_limits.so is setting the limits to
a very big value instead of infinity. As a normal user process can
later only decrease the value and not increase it, it will later get
and EPERM error when trying to set the value to infinity with setrlimit.
The GLIBC has this constant for more than 7 years, and as it is defined
in a header file, it means a lot of binaries are in the wild. This patch
fixes that by adding a wrapper to fix the value passed to or received
from the kernel, before or after calling the prlimit64 syscall.
|
|
Add support for handling the R_AARCH64_IRELATIVE relocation and
STT_GNU_IFUNC symbols to the aarch64 port.
ports/ChangeLog.aarch64:
2013-11-26 Will Newton <will.newton@linaro.org>
* sysdeps/aarch64/dl-irel.h: Include ldsodefs.h.
(ELF_MACHINE_IRELA): Define. (elf_ifunc_invoke): Pass
hwcap to ifunc resolver function. (elf_irela): New function.
* sysdeps/aarch64/dl-machine.h: Include dl-irel.h.
(elf_machine_rela) Handle STT_GNU_IFUNC symbols and
R_AARCH64_IRELATIVE relocations. (elf_machine_lazy_rel):
Handle R_AARCH64_IRELATIVE relocations.
|
|
|
|
|
|
On hppa and ia64, the macro DL_AUTO_FUNCTION_ADDRESS() uses the
variable fptr[2] in it's own scope.
The content of fptr[] is thus undefined right after the macro exits.
Newer gcc's (>= 4.7) reuse the stack space of this variable triggering
a segmentation fault in dl-init.c:69.
To fix this we rewrite the macros to make the call directly to init
and fini without needing to pass back a constructed function pointer.
|
|
The hard alignment of 8 was appropriate for most platforms for
which 8-byte values are 8-byte aligned, but this is not true
for the nios2 platform, so only align to the alignment of the
8-byte type on the platform.
Remove the explicit alignment of struct statfs as it's redundant.
|
|
|
|
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
|
|
|
