Age | Commit message (Collapse) | Author |
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[BZ #15553] Increased the current limits large enough to load large
key and data values, but small enough to not pose a DoS threat.
|
|
|
|
|
|
|
|
|
|
Honza Horak <hhorak@redhat.com>
* nis/yp_xdr.c (xdr_domainname): Use YPMAXDOMAIN as maxsize.
(xdr_mapname): Use YPMAXMAP as maxsize.
(xdr_peername): Use YPMAXPEER as maxsize.
(xdr_keydat): Use YPAXRECORD as maxsize.
(xdr_valdat): Use YPMAXRECORD as maxsize.
|
|
New configure option --enable-obsolete-rpc makes the deprecated RPC
headers and functions available at compile time as they were before
version 2.14. This option will be removed at some time in the future
after the TI-RPC library becomes fully sufficient for the needs of
existing applications.
|
|
* nis/nss_compat/compat-initgroups.c (getgrent_next_nss,
_nss_compat_initgroups_dyn): Fall back to malloc/free for
large group memberships.
|
|
|
|
|
|
No more __const.
|
|
|
|
No need to ever not use c and e.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compat initgroups() is completely broken; the code will always set
skip_initgroups_dyn to true, so initgroups() will never be actually
called, but due to the nature of the code, setgrent() won't be called
either - thus, subsequent invocations of initgroups() will not return
the NIS group list anymore.
This is a simple patch that makes sure skip_initgroups_dyn is set only
in case initgroups is not available; it also attempts to handle the
unavailability of other NSS interfaces better.
Conflicts:
ChangeLog
|
|
|
|
|
|
|
|
The passwd.adjunct.byname table will not be used to fill in password fields
in the passwd.byname replies. Instead it is used to synthesize the
shadow.byname table, should it be missing. This is a useful mode in some
installations involving Solaris.
|
|
|
|
A buffer was freed even though it wasn't allocated as expected. Do
this only when !batch_read.
|
|
|
|
The addresses were interpreted as class-based network addresses.
|
|
The check for the inclusion of a group in the result gave up too early
in case of broken-up NIS groups. We now fall back automatically to
the slow mode of using getgrent_r. As an optimization, if there is
not blacklist we need not perform the check in the first place and
therefore can just accept the results of the initgroups_dyn callback.
|
|
Not the whole was traversed in the function to free all buffers.
BZ #10203
|
|
* sunrpc/rpc/pmap_clnt.h: Likewise.
* sunrpc/rpc/svc.h: Likewise.
* sunrpc/rpc/xdr.h: Likewise.
* sunrpc/rpc/clnt.h: Likewise.
* resolv/netdb.h: Likewise.
* resolv/arpa/nameser.h: Likewise.
* resolv/resolv.h: Likewise.
* argp/argp.h: Likewise.
* locale/langinfo.h: Likewise.
* io/sys/stat.h: Likewise.
* posix/spawn.h: Likewise.
* nis/rpcsvc/nislib.h: Likewise.
* malloc/obstack.h: Likewise.
* sysdeps/ia64/bits/link.h: Likewise.
* sysdeps/i386/bits/link.h: Likewise.
* sysdeps/s390/bits/link.h: Likewise.
* sysdeps/powerpc/bits/link.h: Likewise.
* sysdeps/x86_64/bits/link.h: Likewise.
* sysdeps/sparc/bits/link.h: Likewise.
* sysdeps/sh/bits/link.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sys/io.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sys/io.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/eventfd.h: Likewise.
* sysdeps/unix/sysv/linux/sys/eventfd.h: Likewise.
2009-02-16 Jakub Jelinek <jakub@redhat.com>
* stdlib/monetary.h: Uglify function parameter names.
* sunrpc/rpc/pmap_clnt.h: Likewise.
* sunrpc/rpc/svc.h: Likewise.
* sunrpc/rpc/xdr.h: Likewise.
* sunrpc/rpc/clnt.h: Likewise.
* resolv/netdb.h: Likewise.
* resolv/arpa/nameser.h: Likewise.
* resolv/resolv.h: Likewise.
* argp/argp.h: Likewise.
* locale/langinfo.h: Likewise.
* io/sys/stat.h: Likewise.
* posix/spawn.h: Likewise.
* nis/rpcsvc/nislib.h: Likewise.
* malloc/obstack.h: Likewise.
* sysdeps/ia64/bits/link.h: Likewise.
* sysdeps/i386/bits/link.h: Likewise.
* sysdeps/s390/bits/link.h: Likewise.
* sysdeps/powerpc/bits/link.h: Likewise.
* sysdeps/x86_64/bits/link.h: Likewise.
* sysdeps/sparc/bits/link.h: Likewise.
* sysdeps/sh/bits/link.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sys/io.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sys/io.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/eventfd.h: Likewise.
* sysdeps/unix/sysv/linux/sys/eventfd.h: Likewise.
|
|
after reading name server list.
|
|
handling for host name aliases.
|
|
__libc_clntudp_bufcreate_internal.
* include/sys/socket.h: Declare __have_sock_cloexec.
* socket/Makefile (aux): Add have_sock_cloexec.
* socket/have_sock_cloexec.c: New file.
* sunrpc/clnt_udp.h (clntudp_bufcreate): Now a wrapper around
__libc_clntudp_bufcreate.
(__libc_clntudp_bufcreate): Former implementation of clntudp_bufcreate
which takes an additional parameter. Create socket with non-blocking
mode and close-on-exec flag set, if wanted.
* sunrpc/Versions: Export __libc_clntudp_bufcreate@GLIBC_PRIVATE.
* nis/ypclnt.c (yp_bind_client_create): Use __libc_clntpudp_bufcreate
instead of clntudp_create. The socket has already the close-on-exec
flag set if SOCK_CLOEXEC is defined.
|
|
prototypes.
* include/arpa/nameser_compat.h: Define T_UNSPEC.
* nis/Versions (libnss_nis): Export _nss_nis_gethostbyname4_r.
(libnss_nisplus): Export _nss_nisplus_gethostbyname4_r.
* nis/nss_nis/nis-hosts.c (LINE_PARSER): Change to also handle
af==AF_UNSPEC.
(_nss_nis_gethostbyname4_r): New function.
* nis/nss_nisplus/nisplus-hosts.c (_nss_nisplus_parse_hostent):
Change to also handle af==AF_UNSPEC.
(get_tablename): New function. Use it to avoid duplication.
(_nss_nisplus_gethostbyname4_r): New function.
* nscd/aicache.c (addhstaiX): Use gethostbyname4_r function is
available.
* nss/Versions (libnss_files): Export _nss_files_gethostbyname4_r.
* nss/nss.h: Define struct gaih_addrtuple.
* nss/nss_files/files-hosts.c (LINE_PARSER): Change to also handle
af==AF_UNSPEC.
(_nss_files_gethostbyname4_r): New function.
* resolv/Versions (libnss_dns): Export _nss_dns_gethostbyname4_r.
* resolv/gethnmaddr.c: Adjust __libc_res_nsearch and __libc_res_nquery
calls.
* resolv/res_query.c (__libc_res_nquery): Take two additional
parameters for second answer buffer. Handle type=T_UNSPEC to mean
look up IPv4 and IPv6.
Change all callers.
* resolv/res_send.c (__libc_res_nsend): Take five aditional parameters
for an additional query and answer buffer. Pass to send_vc and
send_dg.
(send_vc): Send possibly two requests and receive two answers.
(send_dg): Likewise.
* resolv/nss_dns/dns-host.c: Adjust calls to __libc_res_nsearch and
__libc_res_nquery.
(_nss_dns_gethostbyname4_r): New function.
(gaih_getanswer_slice): Likewise.
(gaih_getanswer): Likewise.
* resolv/nss_dns/dns-canon.c (_nss_dns_getcanonname_r): Adjust
__libc_res_nquery call.
* resolv/nss_dns/dns-network.c (_nss_dns_getnetbyaddr_r): Likewise.
(_nss_dns_getnetbyname_r): Adjust __libc_res_nsearch call.
* sysdeps/posix/getaddrinfo.c: Use gethostbyname4_r function is
available.
|
|
call.
(__nisfind_server): Similar for open readColdStartFile call.
Patch partially by Jim Meyering.
* nss/nss_files/files-XXX.c (_nss_files_getXXent_r): Save errno
around internal_setent call.
|
|
|
|
* nis/ypclnt.c (yp_order): Fix handling of return value of
do_ypcall_tr call.
Patch by Jeff Moyer <jmoyer@redhat.com>.
|
|
* nis/nss_compat/compat-initgroups.c (getgrent_next_nss): Don't
use result of nss_getgrgid_r if nothing was found. For other
error return with a failure.
Partially based on a patch by Petr Baudis <pasky@suse.cz>.
|