aboutsummaryrefslogtreecommitdiff
path: root/math
AgeCommit message (Collapse)Author
2016-11-23Fix default float_t definition (bug 20855).Joseph Myers
The default (top-level) version of bits/mathdef.h defines float_t to double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11 requires a certain correspondence between these typedefs and FLT_EVAL_METHOD values). I proposed fixing this default in <https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no objections from architecture maintainers, and this patch makes that fix. As noted in the NEWS entry added, this might affect the ABIs of non-glibc libraries (ImageMagick has been mentioned in gcc-patches discussion of the S/390 case - which is unaffected by this patch), but as noted in my previous message, affected libraries would have problems with -mfpmath=sse anyway on 32-bit x86. A (compilation) testcase is added to verify the required correspondence of typedefs to FLT_EVAL_METHOD values. This test is built with -fexcess-precision=standard to avoid any issues with GCC 7 on S/390 providing a more accurate FLT_EVAL_METHOD definition in the default (no excess precision) mode. (This will also be usable to test a fix for the recently reported bug about these typedefs on x86_64 -mfpmath=387, as architecture-specific tests can be added that It is entirely possible that the fixed default makes some architecture-specific versions of bits/mathdef.h semantically equivalent to the default version and so no longer required. I don't intend to investigate that separately from the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which will create as few header variants as possible for each group of definitions. Tested (compilation only) with build-many-glibcs.py. [BZ #20855] * bits/mathdef.h (float_t): Define to float. * math/test-flt-eval-method.c: New file. * math/Makefile (tests): Add test-flt-eval-method. (CFLAGS-test-flt-eval-method.c): New variable.
2016-11-19Add setpayload, setpayloadf, setpayloadl.Joseph Myers
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-11-10Refactor some libm type-generic macros.Joseph Myers
This patch refactors some type-generic libm macros, in both math.h and math_private.h, to be based on a common __MATH_TG macro rather than all replicating similar logic to choose a function to call based on the type of the argument. This should serve to illustrate what I think float128 support for such macros should look like: common macros such as __MATH_TG may need different definitions depending on whether float128 is supported in glibc, so that the individual macros themselves do not need conditionals on float128 support. Tested for x86_64, x86, mips64 and powerpc. * math/math.h (__MATH_TG): New macro. [__USE_ISOC99] (fpclassify): Define using __MATH_TG. [__USE_ISOC99] (signbit): Likewise. [__USE_ISOC99] (isfinite): Likewise. [__USE_ISOC99] (isnan): Likewise. [__USE_ISOC99] (isinf): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (issignaling): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__MATH_EVAL_FMT2): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define using __MATH_TG and __MATH_EVAL_FMT2. * sysdeps/generic/math_private.h (fabs_tg): Define using __MATH_TG. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h [!__NO_LONG_DOUBLE_MATH] (__iscanonicalf): New macro. [!__NO_LONG_DOUBLE_MATH] (__iscanonical): Likewise. [!__NO_LONG_DOUBLE_MATH] (iscanonical): Define using __MATH_TG. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h (__iscanonicalf): New macro. (__iscanonical): Likewise. (iscanonical): Define using __MATH_TG.
2016-11-04Speed up math/test-tgmath2.cSteve Ellcey
* math/test-tgmath2.c: Split up test function.
2016-10-28Add SNAN, SNANF, SNANL macros.Joseph Myers
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for use in static initializers. This patch adds them to glibc's <math.h> (provided you are building with GCC 3.3 or later; no attempt is made to provide any kind of nonconforming fallback for older compilers without the __builtin_nans functions). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL): Likewise. * manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and SNANL. * math/test-double.h (snan_value_MACRO): New macro. * math/test-float.h (snan_value_MACRO): Likewise. * math/test-ldouble.h (snan_value_MACRO): Likewise. * math/libm-test.inc (issignaling_test_data): Add tests of snan_value_MACRO.
2016-10-28Add missing include for stdlib.h.Carlos O'Donell
The test math/test-nan-overflow uses malloc without including stdlib.h. On -Os builds for i486 the header inclusion order is altered enough that the test fails to build because of the warning which is turned into an error. The obvious fix is to include stdlib.h since malloc is being used directly.
2016-10-26Add canonicalize, canonicalizef, canonicalizel.Joseph Myers
TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-22math.h: Wrap C++ bits in extern "C++"Florian Weimer
It is still common to include system header files in an extern "C" block. This means that exiting <math.h>'s own extern "C" block is not sufficient to get back to C++ mode. Use an extern "C++" wrapper instead.
2016-10-21math: Define iszero as a function template for C++ [BZ #20715]Florian Weimer
This increases compatibility with C++ code which is forced to compile with _GNU_SOURCE.
2016-10-19Add getpayload, getpayloadf, getpayloadl.Joseph Myers
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-15Add totalordermag, totalordermagf, totalordermagl.Joseph Myers
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-14Clean up some complex functions raising FE_INVALID.Joseph Myers
Some of the complex arithmetic functions have the following pattern: in some piece of code, one part of the input (real or imaginary, depending on the function) is either infinite or NaN. Part of the result is to be set to NaN in either case, and FE_INVALID raised only if the relevant part of the input was infinite. In such a case, there is no actual need for the conditional on the type of the input, since subtracting the relevant part of the input from itself will produce a NaN, with FE_INVALID only if the relevant part of the input was infinite. This simplifies the code, and as a quality-of-implementation matter also improves things by propagating NaN payloads. (Right now these functions always raise FE_INVALID for signaling NaN arguments because of the call to fpclassify - at least unless glibc is built with -Os - but if fpclassify moves to using integer arithmetic in future, doing arithmetic on the NaN argument also ensures an exception for sNaNs.) Tested for x86_64 and x86. * math/s_ccosh_template.c (M_DECL_FUNC (__ccosh)): Instead of raising FE_INVALID with feraisexcept in case where part of argument is infinite, subtract that part of argument from itself. * math/s_cexp_template.c (M_DECL_FUNC (__cexp)): Likewise. * math/s_csin_template.c (M_DECL_FUNC (__csin)): Likewise. * math/s_csinh_template.c (M_DECL_FUNC (__csinh)): Likewise.
2016-10-12Add more totalorder tests.Joseph Myers
This patch adds more tests of totalorder for finite inputs. Tested for x86_64, x86, mips64 and powerpc. * math/libm-test.inc (totalorder_test_data): Add more tests.
2016-10-12Add totalorder, totalorderf, totalorderl.Joseph Myers
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-11Avoid M_NAN + M_NAN in complex functions.Joseph Myers
Some libm complex functions have code that computes M_NAN + M_NAN. This is nonsensical; it's just equivalent to M_NAN, since it's a quiet NaN (and the comments suggesting this raises an exception are similarly wrong). This patch changes the code just to use M_NAN (and removes the bogus comments). (Preferably, code should either propagate an input NaN or do a computation that raises "invalid" and generates a default NaN at the same time. There are various cases, however, that currently raise "invalid" even for NaN inputs; I think those are cases where "invalid" is optional in ISO C so a change to whether it's raised would be OK, but they would still need more careful consideration than the cases where such issues do not arise.) Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * math/s_ccosh_template.c (M_DECL_FUNC (__ccosh)): Use M_NAN instead of M_NAN + M_NAN. * math/s_csinh_template.c (M_DECL_FUNC (__csinh)): Likewise.
2016-10-07Make iseqsig handle excess precision.Joseph Myers
iseqsig, like other type-generic comparison macros, should behave like a comparison operator in not removing excess range and precision from its arguments (see C11 F.10.11). This patch implements this by making definitions of iseqsig appropriately conditional on __FLT_EVAL_METHOD__ (including support for TS 18661-3 values of that macro), with a corresponding testcase (that failed for 32-bit x86 in the absence of the math.h changes) being added. (Of course the definitions may need reworking when float128 support is added, just as with other type-generic macros.) Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define conditional on value of [__FLT_EVAL_METHOD__]. * math/test-iseqsig-excess-precision.c: New file. * math/Makefile (tests): Add test-iseqsig-excess-precision.
2016-10-07Fix iseqsig for ports that do not support FE_INVALIDAdhemerval Zanella
Microblaze, nios2, and tile do not support FE_INVALID and thus define feraiseexcept as a empty macro. Include math-private.h to get such definition. Checked with a build for microblaze, nios2, and tilepro. * math/s_iseqsig_template.c: Include math-private.h.
2016-10-06Add iseqsig.Joseph Myers
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-09-30Add iscanonical.Joseph Myers
TS 18661-1 adds an iscanonical classification macro to <math.h>. The motivation for this is decimal floating-point, where some values have both canonical and noncanonical encodings. For IEEE binary interchange formats, all encodings are canonical. For x86/m68k ldbl-96, and for ldbl-128ibm, there are encodings that do not represent any valid value of the type; although formally iscanonical does not need to handle trap representations (and so could just always return 1), it seems useful, and in line with the description in the TS of "representations that are extraneous to the floating-point model" as being non-canonical (as well as "redundant representations of some or all of its values"), for it to detect those representations and return 0 for them. This patch adds iscanonical to glibc. It goes in a header <bits/iscanonical.h>, included under appropriate conditions in <math.h>. The default header version just evaluates the argument (converted to its semantic type, though current GCC will probably discard that conversion and any exceptions resulting from it) and returns 1. ldbl-96 and ldbl-128ibm then have versions of the header that call a function __iscanonicall for long double (the sizeof-based tests will of course need updating for float128 support, like other such type-generic macro implementations). The ldbl-96 version of __iscanonicall has appropriate conditionals to reflect the differences in the m68k version of that format (where the high mantissa bit may be either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests for those formats are added as well. Other architectures do not have any new functions added because just returning 1 is correct for all their floating-point formats. Tested for x86_64, x86, mips64 (to test the default macro version) and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include <bits/iscanonical.h>. * bits/iscanonical.h: New file. * math/s_iscanonicall.c: Likewise. * math/Versions (__iscanonicall): New libm symbol at version GLIBC_2.25. * math/libm-test.inc (iscanonical_test_data): New array. (iscanonical_test): New function. (main): Call iscanonical_test. * math/Makefile (headers): Add bits/iscanonical.h. (type-ldouble-routines): Add s_iscanonicall. * manual/arith.texi (Floating Point Classes): Document iscanonical. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add test-iscanonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise. * sysdeps/ieee754/ldbl-96/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-09-28Fix iszero for excess precision.Joseph Myers
Floating-point classification macros are supposed to remove any excess range or precision from their arguments. This patch fixes the non-sNaN version of iszero to do so, by casting the argument to its own type. (This will of course work only for standard-conforming excess precision, not for what GCC does on 32-bit x86 by default where the back end hides excess precision from the front end; the same applies to most of the classification macros in that case, as showed up when we made them use GCC built-in functions.) (iseqsig will have the reverse issue, needing to ensure that when an underlying function is used it's for a type wide enough not to remove any excess precision, since comparison macros must not remove excess precision.) Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT) && !__SUPPORT_SNAN__] (iszero): Cast argument to its own type. * math/test-iszero-excess-precision.c: New file. * math/Makefile (tests): Add test-iszero-excess-precision. (CFLAGS-test-iszero-excess-precision.c): New variable.
2016-09-23Add iszero.Joseph Myers
TS 18661-1 adds an iszero classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify when sNaN support is required and a direct comparison otherwise; any optimizations for this macro should be done through adding __builtin_iszero in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New macro. * math/libm-test.inc (iszero_test_data): New array. (iszero_test): New function. (main): Call iszero_test. * manual/arith.texi (Floating Point Classes): Document iszero. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
2016-09-21Add issubnormal.Joseph Myers
TS 18661-1 adds an issubnormal classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify; any optimizations for this macro should be done through adding __builtin_subnormal in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. The intended structure of the NEWS entry for <math.h> features from TS 18661-1 is like: * New <math.h> features are added from TS 18661-1:2014: - Nearest integer functions: roundeven, roundevenf, roundevenl. - Comparison macros: iseqsig. - Classification macros: iscanonical, issubnormal, iszero. (that is, following the grouping of interfaces in TS 18661-1:2014, with any group where any interfaces are new in glibc 2.25 being listed like that). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New macro. * math/libm-test.inc (issubnormal_test_data): New array. (issubnormal_test): New function. * manual/arith.texi (Floating Point Classes): Document issubnormal. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
2016-09-20Build s_nan* objects from a generic templatePaul E. Murphy
This requires adding a macro to synthesize the call to __strto*_nan. Since this is likely to be the only usage ever for strto* functions in generated libm calls, a dedicated macro is defined for it.
2016-09-20Remove __nan{f,,l} macrosPaul E. Murphy
Use the GCC builtin instead. With the exception of the files built from a template, they are unused. This is preparation for making the s_nanF objects generated.
2016-09-20Make ldexpF generic.Paul E. Murphy
This one is a little more tricky since it is built both for libm and libc, and exports multiple aliases. To simplify aliasing, a new macro is introduced which handles aliasing to two symbols. By default, it just applies declare_mgen_alias to both target symbols. Likewise, the makefile is tweaked a little to generate templates for shared files too, and a new rule is added to build m_*.c objects from the objpfx directory. Verified there are no symbol or code changes using a script to diff the *_ldexp* object files on s390x, aarch64, arm, x86_64, and ppc64.
2016-09-07Add femode_t functions.Joseph Myers
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-09-01Remove unneeded stubs for k_rem_pio2l.Paul E. Murphy
This is only used for the float and double variants. Instead, just add it to the type specific list of files, and remove all stubs, and remove the declaration from math_private.h. I verified x86_64, i486, ia64, m68k, and ppc64 build.
2016-09-01Make common fmin implementation generic.Paul E. Murphy
2016-09-01Make common fmax implementation generic.Paul E. Murphy
Also update aarch64 to ensure the correct s_fmin.c is included. The include order favors including the generated copy.
2016-09-01Make common nextdown implementation generic.Paul E. Murphy
With the exception of those machines using the ldbl-opt in an Implies file, this is a trivial transformation. nextdownl is not subject to the non-trivial versioning rules of the other generated functions, so to keep things simple, it is handled as a one-off case in ldbl-opt to preserve the existing behavior.
2016-09-01Make common fdim implementation generic.Paul E. Murphy
The only difference is the usage of math_narrow_eval when building s_fdiml.c. This should be harmless for long double, but I did observe some code generation changes on m68k, but lack the resources to test it. Likewise, to more easily support overriding symbol generation, the aliasing macros are always conditionally defined on their absence to reduce boilerplate. I also ran builds for i486, ppc64, sparcv9, aarch64, s390x and observed no changes to s_fdim* objects.
2016-08-29Convert remaining complex function to generated filesPaul E. Murphy
Convert cpow, clog, clog10, cexp, csqrt, and cproj functions into generated templates. Note, ldbl-opt still retains s_clog10l.c as the aliasing rules are non-trivial.
2016-08-29Prepare to convert remaining _Complex functionsPaul E. Murphy
This patch has no function changes, except to ensure the git history correctly tracks the changes to convert the double version of these functions into a templated version.
2016-08-29Add fetestexceptflag.Joseph Myers
TS 18661-1 defines an fetestexceptflag function to test the exception state saved in an fexcept_t object by fegetexceptflag. This patch implements this function for glibc. Almost all architectures save exception state in such a way that it can be directly ANDed with exception flag bits, so rather than having lots of fetestexceptflag implementations that all do the same thing, the math/ implementation is made to use this generic logic (which is also OK in the fallback case where FE_ALL_EXCEPT is zero). The only architecture that seems to need anything different is s390. (fegetexceptflag and fesetexceptflag use abbreviated filenames fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned by 14-character filename limits, fetestexceptflag uses the obvious filename fetestexceptflag.c.) The NEWS entry is intended to be expanded along the lines given in <https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when fegetmode and fesetmode are added. Tested for x86_64, x86, mips64 and powerpc. * math/fetestexceptflag.c: New file. * sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by Stefan Liebler. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fetestexceptflag): New function declaration. * manual/arith.texi (fetestexceptflag): Document function. * math/Versions (fetestexceptflag): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fetestexceptflag. (tests): Add test-fetestexceptflag. * math/test-fetestexceptflag.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-08-19Convert _Complex tangent functions to generated codePaul E. Murphy
This converts s_c{,a}tan{,h}{f,,l} into a single templated file c{,a}tan{,h}_template.c with the exception of alpha.
2016-08-19Prepare to convert _Complex tangent functionsPaul E. Murphy
This patch has no function changes, except to ensure the git history correctly tracks the changes to convert the double version of these functions into a templated version.
2016-08-19Convert _Complex sine functions to generated codePaul E. Murphy
Refactor s_c{,a}sin{,h}{f,,l} into a single templated macro.
2016-08-19Prepare to convert _Complex sine functionsPaul E. Murphy
This patch has no function changes, except to ensure the git history correctly tracks the changes to convert the double version of these functions into a templated version.
2016-08-19Merge common usage of mul_split functionPaul E. Murphy
A number of files share identical code for the mul_split function. This moves the duplicated function mul_split into its own header, and refactors the fma usage into a single selection macro. Likewise, mul_split when used by a long double implementation is renamed mul_splitl for clarity.
2016-08-19Convert _Complex cosine functions to generated codePaul E. Murphy
This is fairly straight fowards. m68k overrides are updated to use the framework, and thus are simplified a bit.
2016-08-19Prepare to convert _Complex cosine functionsPaul E. Murphy
This patch has no function changes, except to ensure the git history correctly tracks the changes to convert the double version of these functions into a templated version.
2016-08-17Support for type-generic libm function implementations libmPaul E. Murphy
This defines a new classes of libm objects. The <func>_template.c file which is used in conjunction with the new makefile hooks to derive variants for each type supported by the target machine. The headers math-type-macros-TYPE.h are used to supply macros to a common implementation of a function in a file named FUNC_template.c and glued togethor via a generated file matching existing naming in the build directory. This has the properties of preserving the existing override mechanism and not requiring any arcane build system twiddling. Likewise, it enables machines to override these files without any additional work. I have verified the built objects for ppc64, x86_64, alpha, arm, and m68k do not change in any meaningful way with these changes using the Fedora cross toolchains. I have verified the x86_64 and ppc64 changes still run.
2016-08-16Add fesetexcept.Joseph Myers
TS 18661-1 defines an fesetexcept function for setting floating-point exception flags without the side-effect of causing enabled traps to be taken. This patch series implements this function for glibc. The present patch adds the fallback stub implementation, x86 and x86_64 implementations, documentation, tests and ABI baseline updates. The remaining patches, some of them untested, add implementations for other architectures. The implementations generally follow those of the fesetexceptflag function. As for fesetexceptflag, the approach taken for architectures where setting flags causes enabled traps to be taken is to set the flags (and potentially cause traps) rather than refusing to set the flags and returning an error. Since ISO C and TS 18661 provide no way to enable traps, this is formally in accordance with the standards. The NEWS entry should be considered a placeholder, since this patch series is intended to be followed by further such series adding other TS 18661-1 features, so that the NEWS entry would end up looking more like * New <fenv.h> features from TS 18661-1:2014 are added to libm: the fesetexcept, fetestexceptflag, fegetmode and fesetmode functions, the femode_t type and the FE_DFL_MODE macro. with hopefully more such entries for other features, rather than having an entry for a single function in the end. I believe we have consensus for adding TS 18661-1 interfaces as per <https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>. Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). * math/fesetexcept.c: New file. * sysdeps/i386/fpu/fesetexcept.c: Likewise. * sysdeps/x86_64/fpu/fesetexcept.c: Likewise. * math/fenv.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function declaration. * manual/arith.texi (fesetexcept): Document function. * math/Versions (fesetexcept): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fesetexcept. (tests): Add test-fesetexcept and test-fesetexcept-traps. * math/test-fesetexcept.c: New file. * math/test-fesetexcept-traps.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-08-12Fix test-fexcept when "inexact" implicitly raised.Joseph Myers
ISO C allows feraiseexcept to raise "inexact", in addition to the requested exceptions, when requested to raise "overflow" or "underflow". Testing on ARM and PowerPC e500 (where glibc's feraiseexcept has this property) showed that the new test-fexcept test failed to allow for this; this patch fixes it, by wrapping feraiseexcept to clear FE_INEXACT if implicitly raised and not raised before the call. (It would also be possible to do this with fesetexcept, which always affects exactly the requested flags, but this patch avoids making this fix depend on the fesetexcept changes.) Tested for x86_64, x86, arm and e500. * math/test-fexcept.c (feraiseexcept_exact): New function. (test_set): Call feraiseexcept_exact instead of feraiseexcept. (test_except): Likewise.
2016-08-10Add tests for fegetexceptflag, fesetexceptflag.Joseph Myers
I noticed that there was no meaningful test coverage for fegetexceptflag and fesetexceptflag (one test ensures that calls to them compile and link, but nothing to verify they work correctly). This patch adds tests for these functions. fesetexceptflag is meant to set the relevant exception flag bits to the saved state without causing enabled traps to be taken. On some architectures, it is not possible to set exception flag bits without causing enabled traps to occur. Such architectures need to define EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in this patch for powerpc. x86 avoids needing to define this because the traps resulting from setting exception bits don't occur until the next floating-point operation or fwait instruction. Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for powerpc because of a pre-existing bug in fesetexceptflag for powerpc, which I'll fix separately. * math/test-fexcept-traps.c: New file. * math/test-fexcept.c: Likewise. * math/Makefile (tests): Add test-fexcept and test-fexcept-traps. * sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New macro. * sysdeps/powerpc/math-tests.h [!__NO_FPRS__] (EXCEPTION_SET_FORCES_TRAP): Likewise.
2016-08-05sparc32/sparcv9: add a VIS3 version of fdimAurelien Jarno
sparc32 passes floating point values in the integer registers. VIS3 instructions gives access to the movwtos instruction to directly transfer a value from an integer register to a floating point register. Therefore it makes sense to provide a VIS3 version consisting in the generic version compiled with -mvis3. Changelog: * math/s_fdim.c: Avoid alias renamed. * math/s_fdimf.c: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile [$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines): Add s_fdimf-vis3, s_fdim-vis3. (CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3. (CFLAGS-s_fdim-vis3.c): Likewise. sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file. sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
2016-08-05Improve gen-libm-test.pl LIT() applicationPaul E. Murphy
When bootstrapping float128, this exposed a number of areas where the L suffix is incorrectly applied to simple expressions when it should be applied to each constant in the expression. In order to stave off more macros in libm-test.inc, apply_lit is made slightly more intelligent. It will now split expressions based on space characters, and attempt to apply LIT() to each token. Having done this, there are numerous spacing issues within libm-test.inc which have been fixed. The above is problematic when the L real suffix is not the most expressive modifier, and the compiler complains (i.e ppc64) or silently truncates a value (i.e ppc64).
2016-08-05Fix math.h comment about bits/mathdef.h.Joseph Myers
math.h has a comment about definitions from <bits/mathdef.h>. This comment is in the wrong place in math.h, far below the inclusion of <bits/mathdef.h>. It was originally above the inclusion, but the inclusion was moved by 1998-11-05 Ulrich Drepper <drepper@cygnus.com> * math/math.h: Unconditionally include bits/mathdef.h. Declare long double functions only if __NO_LONG_DOUBLE_MATH is not defined. [...] without moving the comment. Furthermore, the comment refers incorrectly to FLT_EVAL_METHOD and DECIMAL_DIG, which are actually <float.h> macros, and INFINITY, which is in <bits/inf.h>. This patch moves the comment back above the include it refers to and removes the description of macros not defined by the header. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * math/math.h: Move comment about <bits/mathdef.h> definitions above inclusion of <bits/mathdef.h>. Do not mention FLT_EVAL_METHOD, INFINITY or DECIMAL_DIG in that comment.
2016-08-04Do not call __nan in scalb functions.Joseph Myers
When libm functions return a NaN: if it is for NaN input, it should be computed from that input (e.g. adding it to itself), so that payloads are propagated and signaling NaNs quieted, while if it is for non-NaN input, it should be produced by a computation such as (x - x) / (x - x), which raises "invalid" at the same time as producing an appropriate NaN, so avoiding any need for a call to feraiseexcept. Various libm functions, however, call __nan ("") (or __nanf or __nanl) to determine the NaN to return, together with using feraiseexcept (FE_INVALID) to raise the exception. sysdeps/generic/math_private.h has an optimization for those functions with constant "" argument so this doesn't actually involve a call to the __nan function, but it is still not the preferred approach for producing NaNs. (The optimized code also always uses the NAN macro, i.e. produces a default NaN for float converted to whatever the target type is, and on some architectures that may not be the same as the preferred default NaN for double or long double.) This patch fixes the scalb functions to use the conventional method of generating NaNs and raising "invalid" with an appropriate computation. (Most instances of this issue are in the complex functions, where it can more readily be fixed once they have been made type-generic and so only a third as many places need fixing. Some of the complex functions use __nan ("") + __nan (""), where the addition serves no purpose whatsoever.) Tested for x86_64 and x86. * math/e_scalb.c: Do not include <fenv.h>. (invalid_fn): Do calculation resulting in NaN instead of raising FE_INVALID and returning a NaN explicitly. * math/e_scalbf.c: Do not include <fenv.h>. (invalid_fn): Do calculation resulting in NaN instead of raising FE_INVALID and returning a NaN explicitly. * math/e_scalbl.c: Do not include <fenv.h>. (invalid_fn): Do calculation resulting in NaN instead of raising FE_INVALID and returning a NaN explicitly.
2016-08-03Also handle __STDC_WANT_IEC_60559_BFP_EXT__ in <tgmath.h>.Joseph Myers
My __STDC_WANT_IEC_60559_BFP_EXT__ patch omitted to update the conditions on the nextup and nextdown type-generic macros in <tgmath.h>. This patch updates those conditions accordingly. (As glibc doesn't currently have an exp10 type-generic macro, no such changes are needed relating to __STDC_WANT_IEC_60559_FUNCS_EXT__; adding such a type-generic macro would be a new feature.) Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Committed. * math/tgmath.h (nextdown): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not if [__USE_GNU]. (nextup): Likewise.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:04:20 +0000