aboutsummaryrefslogtreecommitdiff
path: root/math
AgeCommit message (Collapse)Author
2015-11-10Add more tests of pow.Joseph Myers
Prompted by a gcc-patches discussion, this patch adds tests of pow for the cases where pow (x, 0.5) is required to return a different result from sqrt (x), as those cases were previously missing from the tests (although they worked correctly). Tested for x86_64 and x86. * math/auto-libm-test-in: Add another test of pow. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (pow_test_data): Add another test.
2015-11-06Fix typo in signgam test messages.Joseph Myers
I noticed a typo in the messages from the signgam tests I recently added. This patch fixes it. Tested for x86_64 and x86. * math/test-signgam-finite.c (RUN_TESTS): Correct messages about calls with argument -0.5. * math/test-signgam-finite-c99.c (RUN_TESTS): Likewise.
2015-11-05Run libm-test tests for finite-math-only functions.Joseph Myers
This patch arranges for the libm-test tests to be run for the finite-math-only function variants, in addition to the existing runs for out-of-line and bits/mathinline.h inline variants. gen-libm-test.pl is made to add a flag to all tests with non-finite inputs or outputs so that they can be skipped at runtime when the finite-math-only variants are being tested (skipping is for all rounding modes; that is, -ffinite-math-only is being treated as excluding overflow cases even when the rounding mode is such that the overflowed result is finite). errno setting is not tested for these variants (in general they don't set it, and it's implementation-defined in ISO C whether it's set on underflow, with the glibc definition being that it may not be for -ffinite-math-only; other cases where errno would normally be expected to be set are mostly excluded as having non-finite or overflowing arguments or results). As with the inline function tests, these ones are built with -D__FINITE_MATH_ONLY=1 to select the function variants, rather than -ffinite-math-only. Use of -ffinite-math-only would not be suitable for these tests because it would also affect libm-test.inc code that e.g. tests whether results are infinities or NaNs - if these function variants have bugs that incorrectly produce such results, we want them to show up in the tests, which means the compiler should not be optimizing the tests on the basis of results being finite. The finite-math-only functions share the same ulps settings as the main out-of-line functions. These interfaces were one significant group of untested ABIs listed at <https://sourceware.org/ml/libc-alpha/2013-07/msg00386.html>. I haven't rerun the script to list untested interfaces, but I expect that the vast bulk of interfaces there are still untested and could do with testcases being added (or, if applicable, being made compat symbols; in general, most symbols not starting '_' are safe bets to add tests for, while _* need more investigation of what the actual public API is, if any). I'd like to encourage people to help reduce the accumulation of untested interfaces by adding more tests. Tested for x86_64 and x86. Given my recent lgamma/gamma and log* fixes, the new tests pass (before those fixes, the new tests showed up those bugs, so illustrating the practical utility of having tests for these function variants). * math/libm-test.inc (NON_FINITE): New macro. (enable_test): Do not run tests flagged NON_FINITE if TEST_FINITE. * math/gen-libm-test.pl (show_exceptions): Add argument $non_finite. (parse_args): Update call to show_exceptions. * math/test-math-finite.h: New file. * math/test-math-no-finite.h: Likewise. * math/test-double-finite.c: Likewise. * math/test-float-finite.c: Likewise. * math/test-ldouble-finite.c: Likewise. * math/test-double.c: Include "test-math-no-finite.h". * math/test-float.c: Include "test-math-no-finite.h". * math/test-ldouble.c: Include "test-math-no-finite.h". * math/test-math-inline.h (TEST_FINITE): New macro. * math/test-math-vector.h (TEST_FINITE): Likewise. * math/Makefile (test-longdouble-yes): Add test-ldouble-finite. (libm-tests): Add test-float-finite and test-double-finite. ($(objpfx)test-float-finite.o): New dependency on $(objpfx)libm-test.stmp. ($(objpfx)test-double-finite.o): Likewise. ($(objpfx)test-ldouble-finite.o): Likewise. (libm-test-no-inline-cflags): New variable. (libm-test-finite-cflags): Likewise. (CFLAGS-test-float-finite.c): Likewise. (CFLAGS-test-double-finite.c): Likewise. (CFLAGS-test-ldouble-finite.c): Likewise. (CFLAGS-test-float.c): Use $(libm-test-no-inline-cflags). (CFLAGS-test-double.c): Likewise. (CFLAGS-test-ldouble.c): Likewise.
2015-11-05Fix finite-math-only lgamma functions signgam setting (bug 19211).Joseph Myers
The lgamma inline functions in bits/math-finite.h do not set signgam if __USE_ISOC99, even when other feature test macros mean a standard such as XSI POSIX is selected for which it should be set. (This is essentially the opposite issue to bug 15421, the out-of-line versions setting signgam even when they shouldn't.) This patch fixes those functions to use __USE_MISC || __USE_XOPEN as the condition for when to set signgam, since it's the condition for when math.h declares signgam. The legacy gamma* names are only declared at all if __USE_MISC || __USE_XOPEN, so they just set signgam unconditionally. Tests for certain standards or not using _GNU_SOURCE cannot use test-skeleton.c (this is a known issue noted on the wiki todo list). Thus, the new tests that signgam remains not set in ISO C modes do not use test-skeleton.c. They also define _ISOMAC to avoid running into declarations in the internal include/ headers that only work in _GNU_SOURCE mode. Tested for x86_64 and x86. [BZ #19211] * math/bits/math-finite.h (lgamma): Set signgam if [__USE_MISC || __USE_XOPEN], not if [!__USE_ISOC99]. (lgammaf): Likewise. (lgammal): Likewise. (gamma): Set signgam unconditionally, not if [!__USE_ISOC99]. (gammaf): Likewise. (gammal): Likewise. * math/test-signgam-finite-c11.c: New file. * math/test-signgam-finite-c99.c: Likewise. * math/test-signgam-finite.c: Likewise. * math/Makefile (tests): Add test-signgam-finite, test-signgam-finite-c99 and test-signgam-finite-c11. (CFLAGS-test-signgam-finite.c): New variable. (CFLAGS-test-signgam-finite-c99.c): Likewise. (CFLAGS-test-signgam-finite-c11.c): Likewise.
2015-11-05Don't redirect ldexp to scalbn in bits/math-finite.h (bug 19209).Joseph Myers
bits/math-finite.h maps ldexp functions to corresponding scalbn functions. This is (a) a namespace bug for C90, which has ldexp but not scalbn, and (b) in any case useless, since the ldexp and scalbn functions have identical semantics (for floating-point types with radix 2), and since the fix for bug 6803 are actually aliases (presumably the mapping was based around the old bug of scalbn not setting errno). This patch removes the bogus redirections. Tested for x86_64 and x86. [BZ #19209] * math/bits/math-finite.h (ldexp): Remove declaration. (ldexpf): Likewise. (ldexpl): Likewise.
2015-11-05Make bits/math-finite.h conditions match other headers (bug 19205).Joseph Myers
bits/math-finite.h declares -ffinite-math-only variants of various functions under conditions not matching those under which the normal versions are declared. * math.h only ever includes bits/mathcalls.h to declare float and long double functions if __USE_ISOC99, but bits/math-finite.h declares some float functions regardless (long double ones are conditioned on __MATH_DECLARE_LDOUBLE). (For C90 functions this isn't a conformance bug because C90 reserves the float and long double names, but is still contrary to good glibc practice. For some other functions in older XSI standards it *is* a conformance bug.) * Some functions are defined as inlines using lgamma_r functions under conditions where those lgamma_r functions are not themselves declared. * hypot is declared under __USE_XOPEN || __USE_ISOC99 in bits/mathcalls.h, __USE_ISOC99 only in bits/math-finite.h. * float and long double versions of Bessel functions should be limited to __USE_MISC (as in bug 18977). * gamma should not be declared for __USE_XOPEN2K (as in bug 18967). * remainder should be restricted to __USE_XOPEN_EXTENDED || __USE_ISOC99, not unconditional. * scalb should not be declared for __USE_XOPEN2K8, and scalbf and scalbl are non-POSIX (as in bug 18967). This patch fixes all these issues (it doesn't seem worth splitting them into separate patches or bugs). I put __USE_ISOC99 conditionals, where needed, around both float and long double declarations, even though formally redundant around the long double declarations because __MATH_DECLARE_LDOUBLE isn't defined without __USE_ISOC99; it seemed clearer that way. The missing declarations of lgamma_r functions are dealt with by directly using declarations of __lgamma*_r_finite, in the implementation namespace, rather than having the inlines rely on asm redirection of lgamma*_r. After this patch, there are some apparently redundant nested __USE_ISOC99 conditionals in lgamma / gamma definitions. These actually reflect a separate bug (the correct condition for the lgamma inline functions to set signgam is __USE_MISC || __USE_XOPEN, the condition under which signgam is declared, rather than disabling setting it if __USE_ISOC99, which includes XSI POSIX versions for which signgam *should* be set). They'll be fixed as part of a fix for that bug, which will also add tests for these inlines. I've put a note about more general conform/ test coverage for -ffinite-math-only on <https://sourceware.org/glibc/wiki/Development_Todo/Master#conformtest_improvements>, alongside other options for which this is also relevant (some of which have also had such bugs in the past relating to mismatched conditionals). I also intend to enable the main libm-test.inc tests for the math-finite.h functions, but some other bugs in __*_finite need fixing first. [BZ #19205] * math/bits/math-finite.h (acosf): Condition declaration on [__USE_ISOC99]. (acosl): Likewise. (acoshf): Likewise. (acoshl): Likewise. (asinf): Likewise. (asinl): Likewise. (atan2f): Likewise. (atan2l): Likewise. (atanhf): Likewise. (atanhl): Likewise. (coshf): Likewise. (coshl): Likewise. (expf): Likewise. (expl): Likewise. (fmodf): Likewise. (fmodl): Likewise. (hypot): Change condition to [__USE_XOPEN || __USE_ISOC99]. (j0f): Change condition to [__USE_MISC && __USE_ISOC99]. (j0l): Likewise. (y0f): Likewise. (y0l): Likewise. (j1f): Likewise. (j1l): Likewise. (y1f): Likewise. (y1l): Likewise. (jnf): Likewise. (jnl): Likewise. (ynf): Likewise. (ynl): Likewise. (lgammaf_r): Condition declaration on [__USE_ISOC99]. (lgammal_r): Likewise. (__lgamma_r_finite): New declaration. (__lgammaf_r_finite): Likewise. (__lgammal_r_finite): Likewise. (lgamma): Use __lgamma_r_finite. (lgammaf): Condition definition on [__USE_ISOC99]. Use __lgammaf_r_finite. (lgammal): Condition definition on [__USE_ISOC99]. Use __lgammal_r_finite. (gamma): Do not define for [!__USE_MISC && __USE_XOPEN2K]. Use __lgamma_r_finite. (gammaf): Condition definition on [__USE_ISOC99]. Use __lgammaf_r_finite. (gammal): Condition definition on [__USE_ISOC99]. Use __lgammal_r_finite. (logf): Condition declaration on [__USE_ISOC99]. (logl): Likewise. (log10f): Likewise. (log10l): Likewise. (ldexpf): Likewise. (ldexpl): Likewise. (powf): Likewise. (powl): Likewise. (remainder): Condition declaration on [__USE_XOPEN_EXTENDED || __USE_ISOC99]. (remainderf): Condition declaration on [__USE_ISOC99]. (remainderl): Likewise. (scalb): Do not declare for [!__USE_MISC && __USE_XOPEN2K8]. (scalbf): Change condition to [__USE_MISC && __USE_ISOC99]. (scalbl): Likewise. (sinhf): Condition declaration on [__USE_ISOC99]. (sinhl): Likewise. (sqrtf): Likewise. (sqrtl): Likewise.
2015-11-04Refactor libm-test inline tests disabling.Joseph Myers
This patch refactors how libm-test.inc handles disabling errno/exception handling tests, and some other tests, for __FAST_MATH__ inline function tests. The macro TEST_INLINE is changed from being defined/undefined to being defined to 1 or 0, so that it can be tested in "if" conditionals instead of #if. For tests of errno and exception setting, separate macros TEST_ERRNO and TEST_EXCEPTIONS are added, and TEST_ERRNO is also used in the disabling of errno testing for vector function tests. The relevant conditionals are moved up a function, so that they take effect before the code that counts the number of tests, so the inline function tests now accurately report that 0 tests for exceptions and errno were executed (whereas they previously reported a large number desipte not running any such tests). Tested for x86_64 and x86. * math/test-math-errno.h: New file. * math/test-math-inline.h (TEST_INLINE): Define to 1 instead of empty. (TEST_ERRNO): New macro. (TEST_EXCEPTIONS): Likewise. * math/test-math-no-inline.h (TEST_INLINE): Likewise. (TEST_EXCEPTIONS): Likewise. * math/test-math-vector.h (TEST_ERRNO): Likewise. * math/test-double.c: Include "test-math-errno.h". * math/test-float.c: Likewise. * math/test-ldouble.c: Likewise. * math/libm-test.inc (test_single_exception) [!TEST_INLINE]: Make code unconditional. (test_exceptions): Only run code if TEST_EXCEPTIONS. (test_single_errno) [!TEST_INLINE && !TEST_MATHVEC]: Make code unconditional. (test_errno): Only run code if TEST_ERRNO. (enable_test): Use "if" conditional on TEST_INLINE, not #ifdef.
2015-11-04Add more libm tests (scalb*, signbit, sin, sincos, sinh, sqrt, tan, tanh, ↵Joseph Myers
tgamma, y0, y1, yn, significand). This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of sin, sincos, sinh, sqrt, tan, tanh, y0, y1 and yn. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (scalb_test_data): Add more tests. (scalbn_test_data): Likewise. (scalbln_test_data): Likewise. (signbit_test_data): Likewise. (sin_test_data): Likewise. (sincos_test_data): Likewise. (sinh_test_data): Likewise. (sqrt_test_data): Likewise. (tan_test_data): Likewise. (tanh_test_data): Likewise. (tgamma_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Likewise. (significand_test_data): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update.
2015-11-03Add more libm tests (modf, nearbyint, nextafter, nexttoward, pow, remainder, ↵Joseph Myers
remquo, rint). This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/libm-test.inc (modf_test_data): Add more tests. (nearbyint_test_data): Likewise. (nextafter_test_data): Likewise. (nexttoward_test_data): Likewise. (pow_test_data): Likewise. (remainder_test_data): Likewise. (remquo_test_data): Likewise. (rint_test_data): Likewise.
2015-11-03Fix dbl-64 remainder sign of zero result (bug 19201).Joseph Myers
For some large arguments, the dbl-64 implementation of remainder gives zero results with the wrong sign, resulting from a subtraction that is mathematically correct but does not guarantee that a zero result has the sign of the first argument to remainder. This patch adds an appropriate check for this case, similar to other implementations of remainder in the case of equality, and adds tests of remainder on inputs already used to test remquo. Tested for x86_64 and x86. [BZ #19201] * sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder): Check for zero remainder in case of large exponents and ensure correct sign of result in that case. * math/libm-test.inc (remainder_test_data): Add more tests.
2015-11-02Make nextafter, nexttoward set errno (bug 6799).Joseph Myers
nextafter and nexttoward fail to set errno on overflow and underflow. This patch makes them do so in cases that should include all the cases where such errno setting is required by glibc's goals for when to set errno (but not all cases of underflow where the result is nonzero and so glibc's goals do not require errno setting). Tested for x86_64, x86, mips64 and powerpc. [BZ #6799] * math/s_nextafter.c: Include <errno.h>. (__nextafter): Set errno on overflow and underflow. * math/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>. (__nextafterf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>. (__nldbl_nexttowardf): Set errno on overflow and underflow. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * math/libm-test.inc (nextafter_test_data): Do not allow errno setting to be missing on overflow. Add more tests. (nexttoward_test_data): Likewise.
2015-10-29Do not test sign of zero result from infinite argument to Bessel functions.Joseph Myers
When Bessel functions return a zero result from an infinite argument, the function oscillates as it approaches 0, so the sign of that zero result should be indeterminate. This patch weakens the expectations accordingly not to check the sign of such results (the tests were causing spurious failures for j1 (-Inf) for ldbl-128). Tested for x86_64 and x86. * math/libm-test.inc (j0_test_data): Do not test sign of zero result from infinite argument. (j1_test_data): Likewise. (jn_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Likewise.
2015-10-29Make drem an alias of remainder (bug 16171).Joseph Myers
The libm drem functions just call the corresponding __remainder functions. This patch removes the unnecessary wrappers by making them into weak aliases at the ELF level. Tested for x86_64, x86, mips64 and powerpc. [BZ #16171] * math/w_remainder.c (drem): Define as weak alias of __remainder. [NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder. * math/w_remainderf.c (dremf): Define as weak alias of __remainderf. * math/w_remainderl.c (dreml): Define as weak alias of __remainderl. * sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of __remainder. * sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of __remainderf. * sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of __remainderl. * sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as weak alias of remainderl. * sysdeps/ieee754/ldbl-opt/w_remainder.c [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong alias of __remainder. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol. * sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as strong alias of __remainderl. (dreml): Use long_double_symbol. * math/Makefile (libm-calls): Remove w_drem. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem. (CFLAGS-nldbl-drem.c): Remove variable. (CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml. * math/w_drem.c: Remove file. * math/w_dremf.c: Likewise. * math/w_dreml.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
2015-10-28Use C11 CMPLX* macros in libm tests.Joseph Myers
libm-test.inc has a macro BUILD_COMPLEX to construct a complex number with given real and imaginary parts while allowing properly for signed zeroes, infinities and NaNs (which don't work properly with a simple real + I * imag, in the absence of compiler support for imaginary types), using assignment to __real__ and __imag__ parts of the number. C11 defines CMPLX* macros for this purpose, which GCC 4.7 and above provide suitable built-in functions for. This patch redefines BUILD_COMPLEX in terms of the standard macros. Tested for x86_64 and x86. * math/libm-test.inc (BUILD_COMPLEX): Remove macro. * math/test-double.h (BUILD_COMPLEX): New macro. * math/test-float.h (BUILD_COMPLEX): Likewise. * math/test-ldouble.h (BUILD_COMPLEX): Likewise.
2015-10-28Use C11 *_TRUE_MIN macros where applicable.Joseph Myers
C11 defines standard <float.h> macros *_TRUE_MIN for the least positive subnormal value of a type. Now that we build with -std=gnu11, we can use these macros in glibc. This patch replaces previous uses of the GCC predefines __*_DENORM_MIN__ (used in <float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in comments. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested for powerpc that installed stripped shared libraries are unchanged by the patch. * math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN, DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__, __DBL_DENORM_MIN__ and __FLT_DENORM_MIN__. * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN instead of DBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>. (__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
2015-10-28Fix i386/x86_64 fesetenv SSE exception clearing (bug 19181).Joseph Myers
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in MXCSR. These arguments should, like other fenv_t values, represent the whole of the floating-point state, so such exceptions should be cleared; this patch adds the required clearing. (Discovered while working on bug 16068.) Tested for x86_64 and x86. [BZ #19181] * sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV. * sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise. * math/test-fenv-clear-main.c: New file. * math/test-fenv-clear.c: Likewise. * math/Makefile (tests): Add test-fenv-clear. * sysdeps/x86/fpu/test-fenv-clear-sse.c: New file. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-clear-sse. [$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable.
2015-10-28Use C11 *_DECIMAL_DIG macros in libm-test.inc.Joseph Myers
Now that we build with -std=gnu11, we can use C11 <float.h> macros such as FLT_DECIMAL_DIG instead of the GCC predefines such as __FLT_DECIMAL_DIG__ that are used internally in <float.h>. This patch makes libm-test.inc do so. Tested for x86_64 and x86. * math/libm-test.inc (TYPE_DECIMAL_DIG): Use LDBL_DECIMAL_DIG, DBL_DECIMAL_DIG and FLT_DECIMAL_DIG instead of __DECIMAL_DIG__, __DBL_DECIMAL_DIG__ and __FLT_DECIMAL_DIG__.
2015-10-27Use -std=gnu11 instead of -std=gnu99.Joseph Myers
Now that GCC 4.7 or later is required to build glibc, this patch moves the build from using -std=gnu99 to -std=gnu11 (option added in 4.7). This allows use of C11 features from GCC's headers, such as new float.h macros and max_align_t. Tested for x86_64 and x86 (testsuite; installed stripped shared libraries are unchanged by the patch on x86_64, while I see some slight code reordering of no significance on x86). * Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99. * Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11 instead of -std=gnu99. * configure.ac (systemtap): Test with -std=gnu11 instead of -std=gnu99. * configure: Regenerated. * math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99 in compilation command in comment.
2015-10-23Remove libm-test.inc special-casing of errors up to 0.5 ulp.Joseph Myers
libm-test.inc has special-case code treating errors of up to 0.5 ulp as allowed (for functions that aren't exactly determined) even if no such errors appeared in libm-test-ulps. This only applies to avoid errors for individual function calls, not for the overall check of ulps at the end of testing a function, resulting in confusing output of the form: testing double (without inline functions) Maximal error of `log_upward' is : 1 ulp accepted: 0 ulp with no report of what testcase produced that error. This patch removes the special case, so that instead you get: testing double (without inline functions) Failure: Test: log_upward (0x1.0000000000001p+0) Result: is: 2.2204460492503129e-16 0x1.fffffffffffffp-53 should be: 2.2204460492503131e-16 0x1.0000000000000p-52 difference: 2.4651903288156619e-32 0x1.0000000000000p-105 ulp : 0.5000 max.ulp : 0.0000 Maximal error of `log_upward' is : 1 ulp accepted: 0 ulp (for formats other than ldbl-128ibm, 0.5 ulp errors only occur in unusual cases such as this where the correctly rounded result is a power of 2 and the computed result is just below it). This should not affect which cases result in the test failing, just ensure that if it fails then some failure for an individual function call was reported. Tested for x86_64 and x86. * math/libm-test.inc (check_float_internal): Do not special-case errors up to 0.5 ulp.
2015-10-23Add more libm tests (ilogb, is*, j0, j1, jn, lgamma, log*).Joseph Myers
This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of log, log10, log1p and log2. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (MAX_EXP): New macro. (ilogb_test_data): Add more tests. (isfinite_test_data): Likewise. (isgreater_test_data): Likewise. (isgreaterequal_test_data): Likewise. (isinf_test_data): Likewise. (isless_test_data): Likewise. (islessequal_test_data): Likewise. (islessgreater_test_data): Likewise. (isnan_test_data): Likewise. (isnormal_test_data): Likewise. (issignaling_test_data): Likewise. (isunordered_test_data): Likewise. (j0_test_data): Likewise. (j1_test_data): Likewise. (jn_test_data): Likewise. (lgamma_test_data): Likewise. (log_test_data): Likewise. (log10_test_data): Likewise. (log1p_test_data): Likewise. (log2_test_data): Likewise. (logb_test_data): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
2015-10-23Fix j1, jn missing errno setting on underflow (bug 18611).Joseph Myers
j1 and jn can underflow for small arguments, but fail to set errno when underflowing to 0. This patch fixes them to set errno in that case. Tested for x86_64, x86, mips64 and powerpc. [BZ #18611] * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and avoid excess range and precision on underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Do not allow missing errno setting for tests of j1 and jn. * math/auto-libm-test-out: Regenerated.
2015-10-22Fix i386 / x86_64 nearbyint exception clearing (bug 15491).Joseph Myers
The implementations of nearbyint functions using x87 floating point (i386 all versions, x86_64 long double only) use the fclex instruction, which clears any exceptions that were raised before the function was called. These functions must not clear exceptions that were raised before they were called. This patch fixes these functions to save and restore the whole floating-point environment (fnstenv / fldenv) as the way of avoiding raising "inexact" (recall that there isn't an x87 instruction for loading just the status word, so the whole environment has to be saved and loaded instead - the code already saved and loaded the control word, which is now obtained from the saved environment after this patch, to disable traps on "inexact"). In the case of the long double functions, any "invalid" exception from frndint (applied to a signaling NaN) needs merging into the saved state; this issue doesn't apply to the float and double functions because that exception would have been raised when the argument is loaded, before the environment is saved. [BZ #15491] * sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore floating-point environment instead of clearing all exceptions. * sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise, merging in "invalid" exceptions from frndint. * sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise. * math/test-nearbyint-except.c: New file. * math/Makefile (tests): Add test-nearbyint-except.
2015-10-21Add more libm tests (fmod, fpclassify, frexp, hypot, ilogb, j0, j1, jn, log, ↵Joseph Myers
log10, log2). This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. 2015-10-21 Joseph Myers <joseph@codesourcery.com> * math/auto-libm-test-in: Add more tests of hypot, j0, j1, jn, log, log10 and log2. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fmod_test_data): Add more tests. (fpclassify_test_data): Likewise. (frexp_test_data): Likewise. (hypot_test_data): Likewise. (ilogb_test_data): Likewise.
2015-10-20Convert 113 more function definitions to prototype style (files with ↵Joseph Myers
assertions). This mostly automatically-generated patch converts 113 function definitions in glibc from old-style K&R to prototype-style. Following my other recent such patches, this one deals with the case of function definitions in files that either contain assertions or where grep suggested they might contain assertions - and thus where it isn't possible to use a simple object code comparison as a sanity check on the correctness of the patch, because line numbers are changed. A few such automatically-generated changes needed to be supplemented by manual changes for the result to compile. openat64 had a prototype declaration with "..." but an old-style definition in sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the generated prototype in the definition (I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing such cases in GCC; the old state was undefined behavior not requiring a diagnostic, but one seems a good idea). In addition, as Florian has noted regparm attribute mismatches between declaration and definition are only diagnosed for prototype definitions, and five functions needed internal_function added to their definitions (in the case of __pthread_mutex_cond_lock, via the macro definition of __pthread_mutex_lock) to compile on i386. After this patch is in, remaining old-style definitions are probably most readily fixed manually before we can turn on -Wold-style-definition for all builds. Tested for x86_64 and x86 (testsuite). * crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style function definition. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * debug/backtracesyms.c (__backtrace_symbols): Likewise. * elf/dl-minimal.c (_itoa): Likewise. * hurd/hurdmalloc.c (malloc): Likewise. (free): Likewise. (realloc): Likewise. * inet/inet6_option.c (inet6_option_space): Likewise. (inet6_option_init): Likewise. (inet6_option_append): Likewise. (inet6_option_alloc): Likewise. (inet6_option_next): Likewise. (inet6_option_find): Likewise. * io/ftw.c (FTW_NAME): Likewise. (NFTW_NAME): Likewise. (NFTW_NEW_NAME): Likewise. (NFTW_OLD_NAME): Likewise. * libio/iofwide.c (_IO_fwide): Likewise. * libio/strops.c (_IO_str_init_static_internal): Likewise. (_IO_str_init_static): Likewise. (_IO_str_init_readonly): Likewise. (_IO_str_overflow): Likewise. (_IO_str_underflow): Likewise. (_IO_str_count): Likewise. (_IO_str_seekoff): Likewise. (_IO_str_pbackfail): Likewise. (_IO_str_finish): Likewise. * libio/wstrops.c (_IO_wstr_init_static): Likewise. (_IO_wstr_overflow): Likewise. (_IO_wstr_underflow): Likewise. (_IO_wstr_count): Likewise. (_IO_wstr_seekoff): Likewise. (_IO_wstr_pbackfail): Likewise. (_IO_wstr_finish): Likewise. * locale/programs/localedef.c (normalize_codeset): Likewise. * locale/programs/locarchive.c (add_locale_to_archive): Likewise. (add_locales_to_archive): Likewise. (delete_locales_from_archive): Likewise. * malloc/malloc.c (__libc_mallinfo): Likewise. * math/gen-auto-libm-tests.c (init_fp_formats): Likewise. * misc/tsearch.c (__tfind): Likewise. * nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise. * nptl/pthread_attr_getdetachstate.c (__pthread_attr_getdetachstate): Likewise. * nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize): Likewise. * nptl/pthread_attr_getinheritsched.c (__pthread_attr_getinheritsched): Likewise. * nptl/pthread_attr_getschedparam.c (__pthread_attr_getschedparam): Likewise. * nptl/pthread_attr_getschedpolicy.c (__pthread_attr_getschedpolicy): Likewise. * nptl/pthread_attr_getscope.c (__pthread_attr_getscope): Likewise. * nptl/pthread_attr_getstack.c (__pthread_attr_getstack): Likewise. * nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr): Likewise. * nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize): Likewise. * nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise. (__pthread_attr_init_2_0): Likewise. * nptl/pthread_attr_setdetachstate.c (__pthread_attr_setdetachstate): Likewise. * nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize): Likewise. * nptl/pthread_attr_setinheritsched.c (__pthread_attr_setinheritsched): Likewise. * nptl/pthread_attr_setschedparam.c (__pthread_attr_setschedparam): Likewise. * nptl/pthread_attr_setschedpolicy.c (__pthread_attr_setschedpolicy): Likewise. * nptl/pthread_attr_setscope.c (__pthread_attr_setscope): Likewise. * nptl/pthread_attr_setstack.c (__pthread_attr_setstack): Likewise. * nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr): Likewise. * nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize): Likewise. * nptl/pthread_condattr_setclock.c (pthread_condattr_setclock): Likewise. * nptl/pthread_create.c (__find_in_stack_list): Likewise. * nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise. * nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to use internal_function. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to prototype-style function definition. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise. (__pthread_mutex_cond_lock_adjust): Likewise. Use internal_function. * nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Convert to prototype-style function definition. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt): Likewise. (__pthread_mutex_unlock): Likewise. * nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise. * nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise. * nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise. * nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise. * nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise. * nss/makedb.c (process_input): Likewise. * posix/fnmatch.c (__strchrnul): Likewise. (__wcschrnul): Likewise. (fnmatch): Likewise. * posix/fnmatch_loop.c (FCT): Likewise. * posix/glob.c (globfree): Likewise. (__glob_pattern_type): Likewise. (__glob_pattern_p): Likewise. * posix/regcomp.c (re_compile_pattern): Likewise. (re_set_syntax): Likewise. (re_compile_fastmap): Likewise. (regcomp): Likewise. (regerror): Likewise. (regfree): Likewise. * posix/regexec.c (regexec): Likewise. (re_match): Likewise. (re_search): Likewise. (re_match_2): Likewise. (re_search_2): Likewise. (re_search_stub): Likewise. Use internal_function (re_copy_regs): Likewise. (re_set_registers): Convert to prototype-style function definition. (prune_impossible_nodes): Likewise. Use internal_function. * resolv/inet_net_pton.c (inet_net_pton): Convert to prototype-style function definition. (inet_net_pton_ipv4): Likewise. * stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise. * sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise. * sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise. * sysdeps/pthread/timer_delete.c (timer_delete): Likewise. * sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise. Make variadic. * time/strptime_l.c (localtime_r): Convert to prototype-style function definition. * wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise. * wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise. * wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise. * wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
2015-10-20Convert 29 more function definitions to prototype style (multiple parameters ↵Joseph Myers
in one K&R parameter declaration). This automatically-generated patch converts 29 function definitions in glibc (including one in an example in the manual) from old-style K&R to prototype-style. Following my other recent such patches, this one deals with the case of function definitions where one K&R parameter declaration declares multiple parameters, as in: void foo (a, b) int a, *b; { } Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function definition. (_ufc_doit_r): Likewise. * crypt/crypt_util.c (_ufc_copymem): Likewise. (_ufc_output_conversion_r): Likewise. * inet/inet_mkadr.c (__inet_makeaddr): Likewise. * inet/rcmd.c (rcmd_af): Likewise. (rcmd): Likewise. (ruserok_af): Likewise. (ruserok): Likewise. (ruserok2_sa): Likewise. (ruserok_sa): Likewise. (iruserok_af): Likewise. (iruserok): Likewise. (__ivaliduser): Likewise. (__validuser2_sa): Likewise. * inet/rexec.c (rexec_af): Likewise. (rexec): Likewise. * inet/ruserpass.c (ruserpass): Likewise. * locale/programs/xmalloc.c (xcalloc): Likewise. * manual/examples/timeval_subtract.c (timeval_subtract): Likewise. * math/w_drem.c (__drem): Likewise. * math/w_dremf.c (__dremf): Likewise. * math/w_dreml.c (__dreml): Likewise. * misc/daemon.c (daemon): Likewise. * resolv/res_debug.c (p_fqnname): Likewise. * stdlib/div.c (div): Likewise. * string/memcmp.c (memcmp_bytes): Likewise. * sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise. * sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
2015-10-16Add more libm tests (fabs, fdim, fma, fmax, fmin, fmod).Joseph Myers
This patch improves the libm test coverage for a few more functions. Tested for x86_64 and x86. * math/libm-test.inc (fabs_test_data): Add more tests. (fdim_test_data): Likewise. (fma_test_data): Likewise. (fmax_test_data): Likewise. (fmin_test_data): Likewise. (fmod_test_data): Likewise.
2015-10-16Add more tests for ceil, floor, round, trunc.Joseph Myers
This patch adds more tests for ceil, floor, round and trunc, with a particular focus on verifying they don't raise spurious "inexact" exceptions for integer arguments (a C99 / C11 requirement, as opposed to the general principle that they shouldn't raise "inexact" for any arguments at all which is a TS 18661-1 requirement). Tested for x86_64 and x86. * math/libm-test.inc (ceil_test_data): Add more tests and more expectations for "inexact". (floor_test_data): Add more tests. (round_test_data): Likewise. (trunc_test_data): Likewise.
2015-10-08Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094).Joseph Myers
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist. It also obviously cannot arise in FE_TOWARDZERO mode.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it is needed; unlike lround and llround, FE_INEXACT is required, not optional, for these functions for a within-range inexact result). The fixes are conditional on FE_INVALID or FE_INEXACT being defined. If any future architecture supports one but not both of those exceptions, the code will fail to compile and need fixing to handle that case (this seemed better than conditioning on both macros being defined, resulting in code that would compile but quietly miss exceptions on such a system). Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only relevant for ia64, it appears) on x86_64 by removing the x86_64 versions of lrintl / llrintl. [BZ #19094] * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and <limits.h>. (__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lrint_test_data): Add more tests. (llrint_test_data): Likewise.
2015-10-08Correct "inexact" expectations in lround, llround tests.Joseph Myers
I noticed that some of my recently added tests of lround and llround wrongly expected the "inexact" exception to be absent for certain within-range non-integer arguments. (It's unspecified whether this exception is present or not for within-range non-integer arguments; it mustn't be present for integer arguments and out-of-range arguments.) This patch corrects those expectations. Tested for x86_64 and x86. * math/libm-test.inc (lround_test_data): Do not expect the absence of "inexact" for some tests with non-integer arguments. (llround_test_data): Likewise.
2015-10-07Fix lround, llround missing exceptions close to overflow threshold (bug 19088).Joseph Myers
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT). Tested for x86_64, x86 and mips64. [BZ #19088] * sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h> and <limits.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and <limits.h>. (__llroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and <limits.h>. (__lroundl) [FE_INVALID]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lround_test_data): Add more tests. (llround_test_data): Likewise.
2015-10-06Add more tests of lrint, llrint, lround, llround.Joseph Myers
This patch adds more tests of lrint, llrint, lround and llround, to cover various standard special cases not previously covered, and more tests of overflow. Tested for x86_64 and x86. * math/libm-test.inc (lrint_test_data): Add more tests. (llrint_test_data): Likewise. (lround_test_data): Likewise. (llround_test_data): Likewise.
2015-10-06Use same test inputs for lrint and llrint.Joseph Myers
This patch makes lrint and llrint use the same test inputs in libm-test.inc, appropriately conditioned on LONG_MAX in the lrint case. Tested for x86_64 and x86. * math/libm-test.inc (lrint_test_data): Add tests used for llrint. (llrint_test_data): Add tests used for lrint.
2015-10-06Add more scalb test expectations for "inexact" exception.Joseph Myers
This patch adds more libm-test.inc expectations for the "inexact" exception for scalb, in all cases except those with a non-integer second argument (where results are unspecified by POSIX, so the function does not count as fully determined and the spurious "inexact" exceptions raised by the existing implementations alongside "invalid" are OK). Tested for x86_64 and x86. * math/libm-test.inc (scalb_test_data): Add more expectations for the "inexact" exception.
2015-10-05Fix ldbl-96 lroundl just below powers of 2 (bug 19071).Joseph Myers
The ldbl-96 version of lroundl is incorrect for systems with 64-bit long when the argument's absolute value is just below a power of 2, 2^32 or more, and rounds up to the next integer; in such cases, it returns 0. The problem is incrementing the high part of the mantissa loses the high bit of the value (which is not an issue for any other floating-point format, and is handled specially in lround when the bit corresponding to 0.5 was in the high part rather than the low part). This patch fixes this in a similar way to that used in llroundl: storing the high part in an unsigned long variable before incrementing it, so problems cannot occur in the case when this code is reachable. I improved test coverage for both lround and llround by making them use the same test inputs (appropriately conditioned on the size of long in the lround case) - complete with the same comments, to make comparison as easy as possible. (This test coverage improvement was how I found the lroundl bug.) Tested for x86_64 and x86. [BZ #19071] * sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Use unsigned long int variable to store possibly incremented high part of mantissa. * math/libm-test.inc (lround_test_data): Add tests used for llround. Use [LONG_MAX > 0x7fffffff] consistently as condition for tests requiring 64-bit long. Do not condition tests on [TEST_FLOAT] unnecessarily. (llround_test_data): Add tests used for lround. Add another expectation for the "inexact" exception. Do not condition tests on [TEST_FLOAT] unnecessarily.
2015-10-02Fix nexttoward overflow in non-default rounding modes (bug 19059).Joseph Myers
ISO C requires overflowing results from nexttoward to be the appropriate infinity independent of the rounding mode, but some implementations use a rounding-mode-dependent result (this is the same issue as was fixed for nextafter in bug 16677). This patch fixes the problem by making the nexttoward implementations discard the result from the floating-point computation that forced an overflow exception and then return the infinity previously computed with integer arithmetic. Tested for x86_64, x86, mips64 and powerpc. [BZ #19059] * math/s_nexttowardf.c (__nexttowardf): Do not return value from overflowing computation. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise. * math/libm-test.inc (nexttoward_test_data): Add more tests.
2015-10-01Fix ldbl-128 / ldbl-128ibm lgamma overflow handling (bug 16347, bug 19046).Joseph Myers
The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with its handling of large arguments. It has an overflow threshold that is correct only for ldbl-128, despite being used for both types - with diagnostic control macros as a temporary measure to disable warnings about that constant overflowing for ldbl-128ibm - and it has a calculation that's roughly x * log(x) - x, resulting in overflows for arguments that are roughly at most a factor 1/log(threshold) below the overflow threshold. This patch fixes both issues, using an overflow threshold appropriate for the type in question and adding another case for large arguments that avoids the possible intermediate overflow. Tested for x86_64, x86, mips64 and powerpc. [BZ #16347] [BZ #19046] * sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include <libc-internal.h>. (MAXLGM): Do not use diagnostic control macros. [LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow threshold for ldbl-128ibm. (__ieee754_lgammal_r): For large arguments, multiply by log - 1 instead of multiplying by log then subtracting. * math/auto-libm-test-in: Add more tests of lgamma. * math/auto-libm-test-out: Regenerated.
2015-10-01Use type-specific precision when printing results in libm-test.inc.Joseph Myers
When libm-test.inc prints the results of failing tests, the output can be unhelpful for ldbl-128 and ldbl-128ibm because the precision used is insufficient to distinguish values of those types, resulting in reported values that look identical but differ by a large number of ulps. This patch changes it to use a precision appropriate for the type, for both decimal and hex output (so output for float is more compact, output for ldbl-128 and ldbl-128ibm is substantially wider). The natural precision to use for decimal is given by the C11 <float.h> macros such as FLT_DECIMAL_DIG. GCC's <float.h> only defines those in C11 mode, so this patch uses the predefines such as __FLT_DECIMAL_DIG__ (added in GCC 4.6) instead; if we move to building with -std=gnu11 (or -std=gnu1x if we can't get rid of 4.6 support). Tested for powerpc and mips64. * math/libm-test.inc (TYPE_DECIMAL_DIG): New macro. (TYPE_HEX_DIG): Likewise. (print_float): Use TYPE_DECIMAL_DIG - 1 and TYPE_HEX_DIG - 1 as precisions when printing floating-point numbers. (check_float_internal): Likewise.
2015-09-30Fix i386 acosh (-qNaN) spurious "invalid" exception.Joseph Myers
The i386 versions of acoshf and acosh raise a spurious "invalid" exception for an argument that is a quiet NaN with the sign bit set. The integer arithmetic to detect arguments < 1 also detects -NaN, and then the computation 0 / 0 in that case raises the exception. This patch fixes this by using (x - x) / (x - x) as the computation in that case instead, which will always raise the exception for non-NaN arguments reaching that code, but not for quiet NaN arguments. Tested for x86_64 and x86. [BZ #19032] * sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1, compute result as (x - x) / (x - x) not as 0 / 0. * sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise. * math/libm-test.inc (acosh_test_data): Add another test of acosh.
2015-09-30Improve test coverage of real libm functions [a-e]*.Joseph Myers
This patch improves test coverage of the real libm functions [a-e]*, ensuring that special cases and ranges of input values of potential significance (such as close to overflow and underflow thresholds) are more systematically covered. This is a followup to <https://sourceware.org/ml/libc-alpha/2013-12/msg00757.html> which covered [a-c]* (however, I found more weaknesses in the coverage of those functions when preparing this patch, hence the additional tests being added for them here). Addition of a test for acosh (-qNaN) is temporarily deferred, to be included as part of a fix for bug 19032 which was discovered in the course of adding these tests (and which illustrates the use of testing -qNaN as well as +qNaN as input even to functions for which the sign of a NaN isn't meant to be significant). Tested for x86_64 and x86. * math/auto-libm-test-in: Add more tests of acos, acosh, asin, atan, atan2, atanh, cbrt, cos, cosh, erf, erfc, exp, exp10, exp2 and expm1. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (acos_test_data): Add more tests. (asin_test_data): Likewise. (asinh_test_data): Likewise. (atan_test_data): Likewise. (atanh_test_data): Likewise. (atan2_test_data): Likewise. (cbrt_test_data): Likewise. (ceil_test_data): Likewise. (copysign_test_data): Likewise. (cos_test_data): Likewise. (cosh_test_data): Likewise. (erf_test_data): Likewise. (erfc_test_data): Likewise. (exp_test_data): Likewise. (exp10_test_data): Likewise. (exp2_test_data): Likewise. (expm1_test_data): Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
2015-09-30Refine errno / "inexact" expectations in libm-test.inc.Joseph Myers
This patch makes math/libm-test.inc more consistent regarding including expectations for errno setting and "inexact" exceptions where expected test results are given manually. Mostly this is a matter of including ERRNO_UNCHANGED in expectations, but there are also some cases where expectations regarding "inexact" were missing for exactly determined functions (especially in cases where some other exception was expected and it should also have been expected that "inexact" was not set with that other exception), and one case for pow where the NO_INEXACT_EXCEPTION expectation should not have been there (the rule about not having "inexact" exceptions for NaN arguments is only when those NaN arguments produce NaN results). I deferred making such changes for complex functions and scalb. Tested for x86_64 and x86. * math/libm-test.inc (acos_test_data): Refine expectations for errno and "inexact" exceptions. (acosh_test_data): Likewise. (asin_test_data): Likewise. (asinh_test_data): Likewise. (atan_test_data): Likewise. (atanh_test_data): Likewise. (atan2_test_data): Likewise. (cbrt_test_data): Likewise. (ceil_test_data): Likewise. (copysign_test_data): Likewise. (cosh_test_data): Likewise. (erf_test_data): Likewise. (erfc_test_data): Likewise. (exp_test_data): Likewise. (exp10_test_data): Likewise. (exp2_test_data): Likewise. (expm1_test_data): Likewise. (fabs_test_data): Likewise. (floor_test_data): Likewise. (fma_test_data): Likewise. (fmax_test_data): Likewise. (fmin_test_data): Likewise. (fmod_test_data): Likewise. (fpclassify_test_data): Likewise. (frexp_test_data): Likewise. (hypot_test_data): Likewise. (ilogb_test_data): Likewise. (isgreater_test_data): Likewise. (isgreaterequal_test_data): Likewise. (isinf_test_data): Likewise. (isless_test_data): Likewise. (islessequal_test_data): Likewise. (islessgreater_test_data): Likewise. (isnan_test_data): Likewise. (isnormal_test_data): Likewise. (issignaling_test_data): Likewise. (isunordered_test_data): Likewise. (j0_test_data): Likewise. (j1_test_data): Likewise. (jn_test_data): Likewise. (lgamma_test_data): Likewise. (lrint_test_data): Likewise. (llrint_test_data): Likewise. (log_test_data): Likewise. (log10_test_data): Likewise. (log1p_test_data): Likewise. (log2_test_data): Likewise. (logb_test_data): Likewise. (lround_test_data): Likewise. (llround_test_data): Likewise. (modf_test_data): Likewise. (nearbyint_test_data): Likewise. (nextafter_test_data): Likewise. (nexttoward_test_data): Likewise. (pow_test_data): Likewise. (remainder_test_data): Likewise. (remquo_test_data): Likewise. (rint_test_data): Likewise. (round_test_data): Likewise. (signbit_test_data): Likewise. (sinh_test_data): Likewise. (sqrt_test_data): Likewise. (tanh_test_data): Likewise. (tgamma_test_data): Likewise. (trunc_test_data): Likewise. (y0_test_data): Likewise. (y1_test_data): Likewise. (yn_test_data): Likewise. (significand_test_data): Likewise.
2015-09-28Fix clog, clog10 inaccuracy (bug 19016).Joseph Myers
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids cancellation error and then using log1p. However, the thresholds for using that approach still result in log being used on argument as large as sqrt(13/16) > 0.9, leading to significant errors, in some cases above the 9ulp maximum allowed in glibc libm. This patch arranges for the approach using log1p to be used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the existing allowance for cases where one of X and Y is very small), adjusting the __x2y2m1 functions to work with the wider range of inputs. This way, log only gets used on arguments below sqrt(1/2) (or substantially above 1), where the error involved is much less. Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration I removed the existing clog and clog10 ulps before regenerating to allow any reduced ulps to appear. Tests added include those found by random test generation to produce large ulps either before or after the patch, and some found by trying inputs close to the (0.75, 0.5) threshold where the potential errors from using log are largest. [BZ #19016] * sysdeps/generic/math_private.h (__x2y2m1f): Update comment to allow more cases with X^2 + Y^2 >= 0.5. * sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment. * sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise. * sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0] (__x2y2m1): Update comment. * sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1 as normal element in sum instead of special-casing based on values of arguments. * math/s_clog.c (__clog): Handle more cases using log1p without hypot. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/auto-libm-test-in: Add more tests of clog and clog10. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2015-09-26Fix powf inaccuracy (bug 18956).Joseph Myers
The flt-32 version of powf can be inaccurate because of bugs in the extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part of calculating log(x) with extra precision: a constant used (as part of adding 1 or 1.5 through integer arithmetic) is incorrect, and then the code fails to mask a computed high part before using it in arithmetic that relies on s_h*t_h being exactly representable. This patch fixes these bugs. Tested for x86_64 and x86. x86_64 ulps for powf removed and regenerated to reflect reduced ulps from the increased accuracy for existing tests. [BZ #18956] * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000 not 0x0040000 for high bit of mantissa. Mask with 0xfffff000 when extracting high part. * math/auto-libm-test-in: Add another test of pow. * math/auto-libm-test-out: Regenerated. * sysdeps/x86_64/fpu/libm-test-ulps: Update.
2015-09-25Fix pow missing underflows (bug 18825).Joseph Myers
Similar to various other bugs in this area, pow functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes, thereby concluding the fixes for known bugs with missing underflow exceptions currently filed in Bugzilla. Tested for x86_64, x86, mips64 and powerpc. [BZ #18825] * sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN): New macro. (DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise. (LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise. * sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN. (__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of DBL_NARROW_EVAL, reloading the PIC register as needed. * sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN. (__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of FLT_NARROW_EVAL. Use separate return path for case when first argument is NaN. * sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the PIC register. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force underflow for subnormal result. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use math_check_force_underflow_nonneg. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use math_check_force_underflow. * sysdeps/x86_64/fpu/x86_64-math-asm.h (LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro. * sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use DEFINE_LDBL_MIN. (__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN. * math/auto-libm-test-in: Add more tests of pow. * math/auto-libm-test-out: Regenerated.
2015-09-24Fix hypot missing underflows (bug 18803).Joseph Myers
Similar to various other bugs in this area, hypot functions can fail to raise the underflow exception when the result is tiny and inexact but one or more low bits of the intermediate result that is scaled down (or, in the i386 case, converted from a wider evaluation format) are zero. This patch forces the exception in a similar way to previous fixes. Note that this issue cannot arise for implementations of hypotf using double (or wider) for intermediate evaluation (if hypotf should underflow, that means the double square root is being computed of some number of the form N*2^-298, for 0 < N < 2^46, which is exactly represented as a double, and whatever the rounding mode such a square root cannot have a mantissa with all zeroes after the initial 23 bits). Thus no changes are made to hypotf implementations in this patch, only to hypot and hypotl. Tested for x86_64, x86, mips64 and powerpc. [BZ #18803] * sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN. (MO): New macro. (__ieee754_hypot) [PIC]: Load PIC register. (__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of DBL_NARROW_EVAL. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use math_check_force_underflow_nonneg in case where result might be tiny. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise. * math/auto-libm-test-in: Add more tests of hypot. * math/auto-libm-test-out: Regenerated.
2015-09-23Refactor code forcing underflow exceptions.Joseph Myers
Various floating-point functions have code to force underflow exceptions if a tiny result was computed in a way that might not have resulted in such exceptions even though the result is inexact. This typically uses math_force_eval to ensure that the underflowing expression is evaluated, but sometimes uses volatile. This patch refactors such code to use three new macros math_check_force_underflow, math_check_force_underflow_nonneg and math_check_force_underflow_complex (which in turn use math_force_eval). In the limited number of cases not suited to a simple conversion to these macros, existing uses of volatile are changed to use math_force_eval instead. The converted code does not always execute exactly the same sequence of operations as the original code, but the overall effects should be the same. Tested for x86_64, x86, mips64 and powerpc. * sysdeps/generic/math_private.h (fabs_tg): New macro. (min_of_type): Likewise. (math_check_force_underflow): Likewise. (math_check_force_underflow_nonneg): Likewise. (math_check_force_underflow_complex): Likewise. * math/e_exp2l.c (__ieee754_exp2l): Use math_check_force_underflow_nonneg. * math/k_casinh.c (__kernel_casinh): Likewise. * math/k_casinhf.c (__kernel_casinhf): Likewise. * math/k_casinhl.c (__kernel_casinhl): Likewise. * math/s_catan.c (__catan): Use math_check_force_underflow_complex. * math/s_catanf.c (__catanf): Likewise. * math/s_catanh.c (__catanh): Likewise. * math/s_catanhf.c (__catanhf): Likewise. * math/s_catanhl.c (__catanhl): Likewise. * math/s_catanl.c (__catanl): Likewise. * math/s_ccosh.c (__ccosh): Likewise. * math/s_ccoshf.c (__ccoshf): Likewise. * math/s_ccoshl.c (__ccoshl): Likewise. * math/s_cexp.c (__cexp): Likewise. * math/s_cexpf.c (__cexpf): Likewise. * math/s_cexpl.c (__cexpl): Likewise. * math/s_clog.c (__clog): Use math_check_force_underflow_nonneg. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/s_csin.c (__csin): Use math_check_force_underflow_complex. * math/s_csinf.c (__csinf): Likewise. * math/s_csinh.c (__csinh): Likewise. * math/s_csinhf.c (__csinhf): Likewise. * math/s_csinhl.c (__csinhl): Likewise. * math/s_csinl.c (__csinl): Likewise. * math/s_csqrt.c (__csqrt): Use math_check_force_underflow. * math/s_csqrtf.c (__csqrtf): Likewise. * math/s_csqrtl.c (__csqrtl): Likewise. * math/s_ctan.c (__ctan): Use math_check_force_underflow_complex. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * stdlib/strtod_l.c (round_and_return): Use math_force_eval instead of volatile. * sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/e_atanh.c (__ieee754_atanh): Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Do not use volatile when forcing underflow. * sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise. * sysdeps/ieee754/dbl-64/s_atan.c (atan): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_fma.c (__fma): Use math_force_eval instead of volatile. * sysdeps/ieee754/dbl-64/s_log1p.c (__log1p): Use math_check_force_underflow. * sysdeps/ieee754/dbl-64/s_sin.c (__sin): Likewise. * sysdeps/ieee754/dbl-64/s_tan.c (tan): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/dbl-64/s_tanh.c (__tanh): Use math_check_force_underflow. * sysdeps/ieee754/flt-32/e_asinf.c (__ieee754_asinf): Likewise. * sysdeps/ieee754/flt-32/e_atanhf.c (__ieee754_atanhf): Likewise. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Use math_check_force_underflow. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise. * sysdeps/ieee754/flt-32/k_sinf.c (__kernel_sinf): Likewise. * sysdeps/ieee754/flt-32/k_tanf.c (__kernel_tanf): Likewise. * sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise. * sysdeps/ieee754/flt-32/s_atanf.c (__atanf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_log1pf.c (__log1pf): Likewise. * sysdeps/ieee754/flt-32/s_tanhf.c (__tanhf): Likewise. * sysdeps/ieee754/ldbl-128/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/k_tanl.c (__kernel_tanl): Likewise. * sysdeps/ieee754/ldbl-128/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Use math_force_eval instead of volatile. * sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_asinl.c (__ieee754_asinl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128ibm/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_tanl.c (__kernel_tanl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_atanl.c (__atanl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-96/k_tanl.c (__kernel_tanl): Use math_check_force_underflow_nonneg. * sysdeps/ieee754/ldbl-96/s_asinhl.c (__asinhl): Use math_check_force_underflow. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Use math_force_eval instead of volatile. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Use math_check_force_underflow.
2015-09-23Use math_narrow_eval more consistently.Joseph Myers
Where glibc code needs to avoid excess range and precision in floating-point arithmetic, code variously uses either asms or volatile to force the results of that arithmetic to memory; mostly this is conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint functions some use of volatile is unconditional (and is present unnecessarily in versions for long double). This patch make such code use the recently-added math_narrow_eval macro consistently, removing the unnecessary uses of volatile in long double lrint / llrint implementations completely. Tested for x86_64, x86, mips64 and powerpc. * math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval. * stdlib/strtod_l.c: Include <math_private.h>. (overflow_value): Use math_narrow_eval. (underflow_value): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise. (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf): Likewise. * sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise. (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use volatile. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use math_narrow_eval. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use volatile. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use math_narrow_eval. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise.
2015-09-19Really fix sysdeps/i386/fpu/s_scalbn.S buildSamuel Thibault
* math/Versions (libc: GLIBC_2_20): New (empty) version set. (libc: GLIBC_2_22): Remove unused version set.
2015-09-18Cleanup a few cases where isinf is used to get the signbit to improve the ↵Wilco Dijkstra
readability and maintainability and allow inlining. 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * math/w_tgamma.c (__ieee754_gamma_r): Use explicit sign check. * math/w_tgammaf.c (__ieee754_gammaf_r): Likewise. * math/w_tgammal.c (__ieee754_gammal_r): Likewise. * stdio-common/printf_fp.c (___printf_fp): Use signbit to get the sign. Use isinf macro to allow inlining. * stdio-common/printf_fphex.c (__printf_fphex): Likewise. * stdio-common/printf_size.c (__printf_size): Likewise.
2015-09-18Since we now inline isinf, isnan and isfinite in math.h, replace uses of ↵Wilco Dijkstra
__isinf_ns(l/f) with isinf, and remove the unused inlines __isinf_ns(l/f), __isnan(f) and __finite(f). 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> * include/math.h: Remove __isinf_ns, __isinf_nsf, __isinf_nsl. * math/Makefile: Remove isinf_ns.c. * math/divtc3.c (__divtc3): Replace __isinf_nsl with isinf. * math/multc3.c (__multc3): Likewise. * math/s_casin.c (__casin): Likewise. * math/s_casinf.c (__casinf): Likewise. * math/s_casinl.c (__casinl): Likewise. * math/s_cproj.c (__cproj): Likewise. * math/s_cprojf.c (__cprojf): Likewise. * math/s_cprojl.c (__cprofl): Likewise. * math/s_ctan.c (__ctan): Likewise. * math/s_ctanf.c (__ctanf): Likewise. * math/s_ctanh.c (__ctanh): Likewise. * math/s_ctanhf.c (__ctanhf): Likewise. * math/s_ctanhl.c (__ctanhl): Likewise. * math/s_ctanl.c (__ctanl): Likewise. * math/w_fmod.c (__fmod): Likewise. * math/w_fmodf.c (__fmodf): Likewise. * math/w_fmodl.c (_fmodl): Likewise. * math/w_remainder.c (__remainder): Likewise. * math/w_remainderf.c (__remainderf): Likewise. * math/w_remainderl.c (__remainderl): Likewise. * math/w_scalb.c (__scalb): Likewise. * math/w_scalbf.c (__scalbf): Likewise. * math/w_scalbl.c (__scalbl): Likewise. * sysdeps/ieee754/dbl-64/s_isinf_ns.c: Deleted file. * sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Replace __isinf_ns with isinf. * sysdeps/ieee754/dbl-64/wordsize-64/math_private.h: Deleted file. * sysdeps/ieee754/dbl-64/wordsize-64/s_isinf_ns.c: Deleted file. * sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Replace __isinf_nsf with isinf. * sysdeps/ieee754/flt-32/math_private.h: Deleted file. * sysdeps/ieee754/flt-32/s_isinf_nsf.c: Deleted file. * sysdeps/ieee754/ldbl-128/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-128/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_cprojl.c(__cprojll): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_ctanl.c(__ctanl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-128ibm/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-128ibm/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf. * sysdeps/ieee754/ldbl-96/s_isinf_nsl.c: Deleted file. * sysdeps/ieee754/ldbl-96/s_sincosl.c (__sincosl): Replace __isinf_nsl with isinf.
2015-09-18Add inlining of the C99 math functions ↵Wilco Dijkstra
isinf/isnan/signbit/isfinite/isnormal/fpclassify using GCC built-ins when available. Since going through the PLT is expensive for these small functions, inlining results in major speedups (about 7x on Cortex-A57 for isinf). The GCC built-ins are not correct if signalling NaN support is required, and thus are turned off in that case (see GCC bug 66462). The test-snan.c tests sNaNs and so must be explicitly built with -fsignaling-nans. 2015-09-18 Wilco Dijkstra <wdijkstr@arm.com> [BZ #15367] [BZ #17441] * math/Makefile: Build test-snan.c with -fsignaling-nans. * math/math.h (fpclassify): Use __builtin_fpclassify when available. (signbit): Use __builtin_signbit(f/l). (isfinite): Use__builtin_isfinite. (isnormal): Use __builtin_isnormal. (isnan): Use __builtin_isnan. (isinf): Use __builtin_isinf_sign.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 22:18:47 +0000