| Age | Commit message (Collapse) | Author |
|---|
|
With this patch, the maximal known error for tgamma is now reduced to 9 ulps
for dbl-64, for all rounding modes. Since exhaustive testing is not possible
for dbl-64, it might be that there are still cases with an error larger than
9 ulps, but all known cases are fixed (intensive tests were done to find cases
with large errors).
Tested on x86_64 and powerpc (and by Adhemerval Zanella on aarch64, arm,
s390x, sparc, and i686).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
For j0f/j1f/y0f/y1f, the largest error for all binary32
inputs is reduced to at most 9 ulps for all rounding modes.
The new code is enabled only when there is a cancellation at the very end of
the j0f/j1f/y0f/y1f computation, or for very large inputs, thus should not
give any visible slowdown on average. Two different algorithms are used:
* around the first 64 zeros of j0/j1/y0/y1, approximation polynomials of
degree 3 are used, computed using the Sollya tool (https://www.sollya.org/)
* for large inputs, an asymptotic formula from [1] is used
[1] Fast and Accurate Bessel Function Computation,
John Harrison, Proceedings of Arith 19, 2009.
Inputs yielding the new largest errors are added to auto-libm-test-in,
and ulps are regenerated for various targets (thanks Adhemerval Zanella).
Tested on x86_64 with --disable-multi-arch and on powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Some math functions (such as __isnan*) are built into both libm and
libc because they are needed in libc. The symbol gets exported from
libc.so and not libm.so, because of which dynamic linking works fine;
the symbols are always resolved from libc.so and libm.so uses its
internal copy of the same function if needed.
When linking statically though, the libm variants get used throughout
because the symbols are exported in both archives and libm.a is
searched first.
This patch removes these duplicate objects from the libm.a archive so
that programs always link to libc in both, the static and dynamic
case. The difference this will cause is that libm uses of these
functions will start using the libc versions in the !SHARED case.
This is harmless at the moment because the objects are identical
except for their names.
Some of these duplicates could be removed from libm.so too, but I
avoided that in the interest of retaining an internal reference if at
all those functions get used within libm in future.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
compat_symbol_reference is now available without tests-internal.
Do not build the test at all on glibc versions that lack the symbols,
to avoid spurious UNSUPPORTED results.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
tests-internal is no longer needed because compat_symbol_reference
now works in regular tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
(Using values from https://members.loria.fr/PZimmermann/papers/accuracy.pdf)
|
|
I have been testing with GCC trunk and GLIBC master while working on the
OpenRISC port. This test has been failing with fabs not being called,
This is caused as my architecture is configure with no long double
meaning the two calls are the same:
TEST (fabs (Vdouble1), double, fabs);
TEST (fabs (Vldouble1), ldouble, fabs);
Instead of the tgmath calls resolving to fabs and fabsl both calls are
fabs. Next, do to compiler optimiations the second call is eliminated.
Fix this by invoking the failing TEST with Vldouble2.
Note, I also updated the FAIL message to more clearly show where the
failure happened, so I see:
FAIL: math/test-tgmath2
original exit status 1
wrong function called, fabs (ldouble) failure on line 174
Cc: Joseph Myers <joseph@codesourcery.com>
|
|
Use the right argument code (j) in the unnormal tests and cast inputs
from the ieee_long_double_shape_type struct to Float64x to properly
test it.
|
|
Make the tests use TEST_COND_intel96 to decide on whether to build the
unnormal tests instead of the macro in nan-pseudo-number.h and then
drop the header inclusion. This unbreaks test runs on all
architectures that do not have ldbl-96.
Also drop the HANDLE_PSEUDO_NUMBERS macro since it is not used
anywhere.
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Add some tests for fpclassify, isnan, isinf and issignaling.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
|
This is a missing bit for b7dd366dbe.
|
|
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
In TS 18661-1, getpayload had an unspecified return value for a
non-NaN argument, while C2x requires the return value -1 in that case.
This patch implements the return value of -1. I don't think this is
worth having a new symbol version that's an alias of the old one,
although occasionally we do that in such cases where the new function
semantics are a refinement of the old ones (to avoid programs relying
on the new semantics running on older glibc versions but not behaving
as intended).
Tested for x86_64 and x86; also ran math/ tests for aarch64 and
powerpc.
|
|
This patch changes the exp10f error handling semantics to only set
errno according to POSIX rules. New symbol version is introduced at
GLIBC_2.32. The old wrappers are kept for compat symbols.
There are some outliers that need special handling:
- ia64 provides an optimized implementation of exp10f that uses ia64
specific routines to set SVID compatibility. The new symbol version
is aliased to the exp10f one.
- m68k also provides an optimized implementation, and the new version
uses it instead of the sysdeps/ieee754/flt32 one.
- riscv and csky uses the generic template implementation that
does not provide SVID support. For both cases a new exp10f
version is not added, but rather the symbols version of the
generic sysdeps/ieee754/flt32 is adjusted instead.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
powerpc64le-linux-gnu.
|
|
It is inspired by expf and reuses its tables and internal functions.
The error checks are inlined and errno setting is in separate tail
called functions, but the wrappers are kept in this patch to handle
the _LIB_VERSION==_SVID_ case.
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
Result for x86_64 (i7-4790K CPU @ 4.00GHz) are:
Before new code:
"exp10f": {
"workload-spec2017.wrf (adapted)": {
"duration": 4.0414e+09,
"iterations": 1.00128e+08,
"reciprocal-throughput": 26.6818,
"latency": 54.043,
"max-throughput": 3.74787e+07,
"min-throughput": 1.85038e+07
}
With new code:
"exp10f": {
"workload-spec2017.wrf (adapted)": {
"duration": 4.11951e+09,
"iterations": 1.23968e+08,
"reciprocal-throughput": 21.0581,
"latency": 45.4028,
"max-throughput": 4.74876e+07,
"min-throughput": 2.20251e+07
}
Result for aarch64 (A72 @ 2GHz) are:
Before new code:
"exp10f": {
"workload-spec2017.wrf (adapted)": {
"duration": 4.62362e+09,
"iterations": 3.3376e+07,
"reciprocal-throughput": 127.698,
"latency": 149.365,
"max-throughput": 7.831e+06,
"min-throughput": 6.69501e+06
}
With new code:
"exp10f": {
"workload-spec2017.wrf (adapted)": {
"duration": 4.29108e+09,
"iterations": 6.6752e+07,
"reciprocal-throughput": 51.2111,
"latency": 77.3568,
"max-throughput": 1.9527e+07,
"min-throughput": 1.29271e+07
}
Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, aarch64-linux-gnu,
and sparc64-linux-gnu.
|
|
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
|
|
With fenvinline.h removal the flag is not used anymore.
Checked on x86_64-linux-gnu.
|
|
There are 2 new input values that require to be marked as
xfail-rounding:ibm128-libgcc as they're known to fail because of libgcc
issues with different rounding modes.
Otherwise, the other tests just need an increase in ULP.
|
|
The corner cases included were generated using exhaustive search
for all float/binary32 values on x86_64 (comparing to MPFR for
correct rounding to nearest).
For the j0/j1/y0 functions, only cases with ulp error <= 9 were
included.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Similar to string2.h (18b10de7ce) and string3.h (09a596cc2c) this
patch removes the fenvinline.h on all architectures. Currently
only powerpc implements some optimizations. This kind of optimization
is better implemented by the compiler (which handles the architecture
ISA transparently).
Also, for the specific optimized powerpc implementation the code is
becoming convoluted and these micro-optimization are hardly wildly
used, even more being a possible hotspot in realword cases
(non-default rounding are used only on specific cases and exception
handling are done most likely only on errors path). Only x86
implements similar optimization (on fenv.h) also indicates that
these should no be on libc.
The math/test-fenv already covers all math/test-fenvinline tests,
so it is safe to remove it.
The powerpc fegetround optimization is moved to internal
fenv_libc.h.
The BZ#94193 [1] the corresponding GCC bug for adding replacements
for these on powerpc.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94193
|
|
With mathinline removal there is no need to keep building and testing
inline math tests.
The gen-libm-tests.py support to generate ULP_I_* is removed and all
libm-test-ulps files are updated to longer have the
i{float,double,ldouble} entries. The support for no-test-inline is
also removed from both gen-auto-libm-tests and the
auto-libm-test-out-* were regenerated.
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
With m68k mathinline.h removal the flag is not used anymore.
Checked with a m68k-linux-gnu build/check.
|
|
With m68k bits moved to internal headers, no architectures export
additional optimizations on mathinline.
|
|
On platforms where long double has the same ABI as double, glibc
defines long double functions as aliases for the corresponding double
functions. The declarations of those functions in <math.h> are
disabled to avoid problems with aliases having incompatible types, but
GCC 10 now gives errors for incompatible types when the long double
function is known to GCC as a built-in function, not just when there
is an incompatible header declaration.
This patch fixes those errors by using appropriate
-fno-builtin-<function> options to compile the double functions. The
list of CFLAGS-* settings is an appropriately adapted version of that
in sysdeps/ieee754/ldbl-opt/Makefile used there for building nldbl-*.c
files; in particular, the options are used even if GCC does not
currently have a built-in function of a given function, so that adding
such a built-in function in future will not break the glibc build.
Thus, various of the CFLAGS-* settings are only for future-proofing
and may not currently be needed (and it's possible some could be
irrelevant for other reasons).
Tested with build-many-glibcs.py for arm-linux-gnueabi (compilers and
glibcs builds), where it fixes the build that previously failed.
|
|
This patch creates test-ibm128* tests from the long double function tests.
In order to explicitly test IBM long double functions -mabi=ibmlongdouble is
added to CFLAGS.
Likewise, update the test headers to correct choose ULPs when redirects
are enabled.
Co-authored-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Co-authored-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
|
|
Change all of the #! lines in Python scripts that are called from
Makefiles to reference /usr/bin/python3.
All of the scripts called from Makefiles are already run with Python 3,
so let's make sure they are explicitly using Python 3 if called
manually.
|
|
The API doesn't change, i.e. compilers using a long double format compatible
with the IEEE 128-bit extended precision format are redirected from *l
functions to __*ieee128 symbols using the same mechanism already
used with -mlong-double-64 for complex math functions.
|
|
Modify the headers to redirect long double functions to global __*f128
symbols or to __*ieee128 otherwise.
Most of the functions in math.h benefit from the infrastructure already
available for __LDBL_COMPAT. The only exceptions are nexttowardf and
nexttoward that need especial treatment.
Both math/bits/mathcalls-helper-functions.h and math/bits/mathcalls.h
were modified in order to provide alternative redirection destinations
that are essential to support functions that should not be redirected to
the same name pattern of the rest of the functions, i.e.: __fpclassify,
__signbit, __iseqsig, __issignaling, isinf, finite and isnan, which will
be redirected to __*f128 instead of __*ieee128 used for the rest.
|
|
Move the narrow math aliasing macros into a new sysdep header file
math-narrow-alias-float128.h. Then, provide an override header
to supply the necessary changes to supply the *ieee128 aliases of
these symbols.
This adds ieee128 aliases for faddl, fdivl, fmull, fsubl, daddl, ddivl,
dmull, dsubl.
|
|
After defining the long double redirections to double, __MATHDECL_1 has
to be redefined to its previous state in order to avoid redirecting all
subsequent types.
|
|
This is a preparatory patch to enable building a _Float128
variant to ease reuse when building a _Float128 variant to
alias this long double only symbol.
Notably, stubs are added where missing to the native _Float128
sysdep dir to prevent building these newly templated variants
created inside the build directories.
Also noteworthy are the changes around LIBM_SVID_COMPAT. These
changes are not intuitive. The templated version is only
enabled when !LIBM_SVID_COMPAT, and the compat version is
predicated entirely on LIBM_SVID_COMPAT. Thus, exactly one is
stubbed out entirely when building. The nldbl scalb compat
files are updated to account for this.
Likewise, fixup the reuse of m68k's e_scalb{f,l}.c to include
it's override of e_scalb.c. Otherwise, the search path finds
the templated copy in the build directory. This could be
futher simplified by providing an overridden template, but I
lack the hardware to verify.
|
|
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Passes buildmanyglibc.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
In the function handle_input_flag, the end-loop condition is not
correct, because when the loop variable i equals 16
(num_input_flag_types), then input_flags[16] will be out of bounds.
(This issue is only relevant with invalid input files to
gen-auto-libm-tests.)
|
|
Remove _finite tests and references from x86_64. Rather than calling
__exp_finite, use exp directly (since it's the same entry point).
x86_64 builds and passes testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Remove the finite-math tests from the testsuite - these are no longer
useful after removing math-finite.h header.
Passes buildmanyglibc, build&test on x86_64 and AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Remove math-finite.h redirections for math functions.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
When the const attribute of totalorder* functions was replaced with the
pure attribute, by commit ID ab41100bab12, it did not use the
__attribute_pure__ macro, but the __attribute__ ((__pure__)) statement.
All other uses of the pure attribute in glibc use the macro.
Tested for powerpc64le.
|
|
Since the commit
commit 42760d764649ad82f5fe45a26cbdf2c2500409f7
Author: Joseph Myers <joseph@codesourcery.com>
Date: Thu Aug 15 15:18:34 2019 +0000
Make totalorder and totalordermag functions take pointer arguments.
the test case math/test-totalorderl-ldbl-128ibm fails on every input
pair, when compiled with -O2, which is the case for glibc test suite.
Debugging showed that the test case is passing arguments incorrectly to
totalorderl. This can also be inferred by the fact that compiling the
test case with -O0 hides the bug.
The documentation for the const attribute in GCC manual reads:
Note that a function that has pointer arguments and examines the data
pointed to must not be declared const if the pointed-to data might
change between successive invocations of the function. In general,
since a function cannot distinguish data that might change from data
that cannot, const functions should never take pointer or, in C++,
reference arguments. Likewise, a function that calls a non-const
function usually must not be const itself.
Since the pointed-to data is likely to be changed by user code between
invocations of totalorder*, this patch removes the const attribute from
the declarations of all totalorder functions, replacing it with the pure
attribute, as suggested in the manual:
The pure attribute imposes similar but looser restrictions on a
function’s definition than the const attribute: pure allows the
function to read any non-volatile memory, even if it changes in
between successive invocations of the function.
Tested for powerpc64le and x86_64.
|
|
|
|
When adding some of the TS 18661 narrowing functions for glibc 2.28, I
deferred adding corresponding <tgmath.h> support because of unresolved
questions about the specification for those type-generic macros,
especially in relation to _FloatN and _FloatNx types.
Those issues are now clarified in the response to Clarification
Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h
support. As with other tgmath.h macros, there are fairly
straightforward implementations based on __builtin_tgmath for GCC 8
and later, which result in exactly the right function being called in
each case, and more complicated implementations for GCC 7 and earlier,
which generally result in a function being called whose arguments have
the right format (i.e. an alias for the right function), but which
might not be exactly the function name specified by TS 18661.
In one case with older compilers (f32x* macros, where the type
_Float64x exists and all the arguments have type _Float32 or
_Float32x), there is a further relaxation and the function called may
have arguments narrower than the one specified by the TS, but still
wide enough to represent the arguments exactly, so the result of the
call is unchanged (as this does not affect any case where rounding of
integer arguments might be involved). With GCC 6 or before this is
inherently unavoidable (but still harmless and not detectable by how
the compiled program behaves, unless it redefines the functions in
question like the testcases do) because _Float32x and _Float64 are
both typedefs for double in that case but the specified semantics
result in different functions, with different argument formats, being
called for those two argument types.
Tests for the new macros are handled through gen-tgmath-tests.py,
which deals with the special-case handling for older GCC.
Tested as follows: with the full glibc testsuite on x86_64 and x86
(with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with
GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9).
* math/tgmath.h [__HAVE_FLOAT128X]: Give error.
[(__HAVE_FLOAT64X && !__HAVE_FLOAT128)
|| (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise.
(__TGMATH_2_NARROW_F): Likewise.
(__TGMATH_2_NARROW_D): New macro.
(__TGMATH_2_NARROW_F16): Likewise.
(__TGMATH_2_NARROW_F32): Likewise.
(__TGMATH_2_NARROW_F64): Likewise.
(__TGMATH_2_NARROW_F32X): Likewise.
(__TGMATH_2_NARROW_F64X): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise.
* math/gen-tgmath-tests.py (Type): Add members
non_standard_real_argument_types_list, long_double_type,
complex_float64_type and float32x_ext_type.
(Type.__init__): Set the new members.
(Type.floating_type): Add new argument floatn.
(Type.real_floating_type): Likewise.
(Type.can_combine_types): Likewise.
(Type.combine_types): Likewise.
(Type.init_types): Create internal Float32x_ext type.
(Tests.__init__): Define Float32x_ext in generated C code.
(Tests.add_tests): Handle narrowing functions.
(Tests.add_all_tests): Likewise.
(Tests.tests_text): Allow variation in mant_dig for narrowing
functions with compilers before GCC 8.
* math/Makefile (tgmath3-narrow-types): New variable.
(tgmath3-narrow-macros): Likewise.
(tgmath3-macros): Add $(tgmath3-narrow-macros).
|
|
I noticed that the totalorder compat tests mixed TEST_COMPAT
conditions using COMPAT_VER (computed as the first symbol version for
the symbol being tested) and those with a hardcoded GLIBC_2_25.
COMPAT_VER is logically correct here, so this patch changes the tests
to use it. GLIBC_2_25 is harmless at present (even for _FloatN /
_FloatNx functions added in later glibc versions). However, if in
future we support _Float16 functions in glibc for any existing
configuration, the test using GLIBC_2_25 would get things wrong
(wrongly think that there are compat versions of totalorderf16 and
totalordermagf16 to test).
(The actual definitions of the compat / versioned symbols for the
totalorder functions make no attempt to deal with the possibility of
libm function support for a new floating-point format, already
supported for other architectures in glibc, being added in some glibc
configuration in future, for which the only vaguely plausible case
would be if some architecture gets _Float128 support it previously
lacked; this is much like functions added after glibc 2.4 not
generally attempting to deal with compat support for long double
changing away from having the same format as double.)
Tested for x86_64, and with build-many-glibcs.py.
* math/libm-test-compat_totalorder.inc (do_test)
[TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Change condition to
[TEST_COMPAT (libm, COMPAT_VER, GLIBC_2_31)].
* math/libm-test-compat_totalordermag.inc (do_test)
[TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Likewise.
|
|
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
|
|
C2X (current version in git, postdating the most recent public draft
available as a PDF on the WG14 website) adds the interfaces from TS
18661-4, other than the reduction functions, as unconditionally
required and visible in <math.h> for hosted implementations; the
__STDC_WANT_IEC_60559_FUNCS_EXT__ macro is not included in C2X at all
(as the reduction functions aren't included at all, expected to end up
in a version of the TS updated to be relative to C2X).
This patch updates the glibc headers accordingly, following the same
pattern used for 18661-1 functions. As the only 18661-4 functions
currently supported are the exp10 functions that have been in glibc
for a very long time, this means that in fact __GLIBC_USE
(IEC_60559_FUNCS_EXT) ends up being used only to determine the
definition of __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X, not yet in any
headers other than bits/libc-header-start.h.
(I hope to add the other 18661-4 functions to glibc at some point; the
main complication is the current lack of MPFR support for many of
these functions.)
Tested for x86_64.
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT):
Update comment.
(__GLIBC_USE_IEC_60559_FUNCS_EXT_C2X): New macro.
* bits/math-finite.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Change
to [__GLIBC_USE (IEC_60559_FUNCS_EXT_C2X)].
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]:
Likewise.
|
|
C2X adds the interfaces from TS 18661-1, and all except a handful in
Annex F are unconditionally visible in C2X rather than only visible
when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates
glibc headers accordingly: most uses of __GLIBC_USE
(IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE
(IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the
type-generic macros in tgmath.h will go away when the functions are
changed to take pointer arguments.)
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update
comment.
(__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)].
* include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE
(IEC_60559_BFP_EXT)]: Likewise.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]:
Likewise, except for totalorder, totalordermag, getpayload,
setpayload and setpayloadsig.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise,
except for totalorder and totalordermag.
|
|
This patch enable the builtin usage for clang for the C99 functions
fpclassify, isfinite, isnormal, isnan, isinf, and sigbit. This allows
clang optimize the calls on frontend instead of call the appropriate
glibc symbols.
Checked on aarch64-linux-gnu and x86_64-linux-gnu. I checked the supported
version for each builtin based on released version from clang/llvm.
* math/math.h (fpclassify, isfinite, isnormal, isnan): Use builtin for
clang 2.8.
(signbit): Use builtin for clang 3.3.
(isinf): Use builtin for clang 3.7.
|
