glibc.git - Mirror of https://sourceware.org/git/glibc.git

Age	Commit message (Collapse)	Author
2017-02-24	Run libm tests separately for each function.	Joseph Myers
	At present, libm tests for each function get built into a single executable (for each floating point type, for each of normal / inline / finite-math-only functions, plus vector variants) and run together, resulting in a single PASS or FAIL (for each of those nine variants plus vector variants). Building this executable involves reading over 50 MB of libm-test-.c sources. This patch arranges for tests of each function to be run separately from the makefiles instead. There are 121 functions being tested for each (type, variant pair) (actually 126, but run as 121 from the Makefile because each of the pairs (exp10, pow10), (isfinite, finite), (lgamma, gamma), (remainder, drem), (scalbn, ldexp), shares a table of test results and so is run together), so 1089 separate tests run from the Makefile, plus 48 vector tests on x86_64 (six functions for eight vector variants). Each test only involves a libm-test-<func>.c file of no more than about 4 MB, rather than all such files taking about 50 MB. With tests run separately, test summaries will indicate which functions actually have problems (of course, those problems may just be out-of-date libm-test-ulps files if the file hasn't been updated for the architecture in question recently). All the .c files for the 1089+48 tests are generated automatically from the Makefiles. Various checked-in boilerplate .c files are removed as no longer needed. CFLAGS definitions for the different kinds of tests are generated using makefile iterators to apply target-specific variable settings. libm-have-vector-test.h is no longer needed; the list of functions to test for each vector type is now in the sysdeps Makefile. This should reduce the amount of boilerplate needed for float128 testing support; test-float128.h will still be needed, but not various .c files or Makefile CFLAGS definitions. The logic for creating dependencies on libm-test-support-.o files should also render <https://sourceware.org/ml/libc-alpha/2017-02/msg00279.html> unnecessary. Tested for x86_64 and x86. * math/Makefile (libm-tests-generated): Remove variable. (libm-tests-base-normal): New variable. (libm-tests-base-finite): Likewise. (libm-tests-base-inline): Likewise. (libm-tests-base): Likewise. (libm-tests-normal): Likewise. (libm-tests-finite): Likewise. (libm-tests-inline): Likewise. (libm-tests-vector): Likewise. (libm-tests): Define in terms of these new variables. (libm-tests-for-type): New variable. (libm-tests.o): Move definition. (tests): Move addition of $(libm-tests). (generated): Update for new and removed libm test files. ($(objpfx)libm-test.c): Remove target. ($(objpfx)libm-have-vector-test.h): Likewise. (CFLAGS-test-double-vlen2.c): Remove variable. (CFLAGS-test-double-vlen4.c): Likewise. (CFLAGS-test-double-vlen8.c): Likewise. (CFLAGS-test-float-vlen4.c): Likewise. (CFLAGS-test-float-vlen8.c): Likewise. (CFLAGS-test-float-vlen16.c): Likewise. (CFLAGS-test-float.c): Likewise. (CFLAGS-test-float-finite.c): Likewise. (CFLAGS-libm-test-support-float.c): Likewise. (CFLAGS-test-double.c): Likewise. (CFLAGS-test-double-finite.c): Likewise. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-test-ldouble.c): Likewise. (CFLAGS-test-ldouble-finite.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. (libm-test-inline-cflags): New variable. (CFLAGS-test-ifloat.c): Remove variable. (CFLAGS-test-idouble.c): Likewise. (CFLAGS-test-ildouble.c): Likewise. ($(addprefix $(objpfx), $(libm-tests.o))): Move target and update dependencies. ($(foreach t,$(libm-tests-normal),$(objpfx)$(t).c)): New rule. ($(foreach t,$(libm-tests-finite),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(libm-tests-inline),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(libm-tests-vector),$(objpfx)$(t).c)): Likewise. ($(foreach t,$(types),$(objpfx)libm-test-support-$(t).c)): Likewise. (dependencies on libm-test-support-.o): Remove. ($(foreach f,$(libm-test-funcs-all),$(objpfx)$(o)-$(f).o)): New rules using iterators. ($(addprefix $(objpfx),$(call libm-tests-for-type,$(o)))): Likewise. ($(objpfx)libm-test-support-$(o).o): Likewise. ($(addprefix $(objpfx),$(filter-out $(tests-static) $(libm-vec-tests),$(tests)))): Filter out $(libm-tests-vector) instead. ($(addprefix $(objpfx), $(libm-vec-tests))): Use iterator to define rule instead. math/README.libm-test: Update. * math/libm-test-acos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-acosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-asin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-asinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atan2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-atanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cabs.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cacos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cacosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-canonicalize.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-carg.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-casin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-casinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-catan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-catanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cbrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ccos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ccosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ceil.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cexp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cimag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-clog.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-clog10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-conj.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-copysign.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cosh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cpow.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-cproj.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-creal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-csqrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ctan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ctanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-erf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-erfc.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-exp2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-expm1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fabs.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fdim.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-floor.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmax.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmaxmag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fminmag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fmod.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fpclassify.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-frexp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fromfp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-fromfpx.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-getpayload.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-hypot.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ilogb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iscanonical.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iseqsig.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isfinite.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isgreater.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isgreaterequal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isinf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isless.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-islessequal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-islessgreater.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isnan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isnormal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-issignaling.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-issubnormal.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-isunordered.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-iszero.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-j0.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-j1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-jn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lgamma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llogb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llrint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-llround.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log10.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log1p.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-log2.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-logb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lrint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-lround.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-modf.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nearbyint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextafter.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextdown.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nexttoward.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-nextup.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-pow.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-remainder.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-remquo.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-rint.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-round.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-roundeven.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalb.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalbln.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-scalbn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-setpayload.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-setpayloadsig.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-signbit.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-significand.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sin.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sincos.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sinh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-sqrt.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tan.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tanh.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-tgamma.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-totalorder.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-totalordermag.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-trunc.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ufromfp.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-ufromfpx.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-y0.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-y1.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-yn.inc: Include libm-test-driver.c. (do_test): New function. * math/libm-test-driver.c: Do not include libm-have-vector-test.h. (HAVE_VECTOR): Remove macro. (START): Do not call HAVE_VECTOR. * math/test-double-vlen2.h (FUNC_TEST): Remove macro. * math/test-double-vlen4.h (FUNC_TEST): Remove macro. * math/test-double-vlen8.h (FUNC_TEST): Remove macro. * math/test-float-vlen16.h (FUNC_TEST): Remove macro. * math/test-float-vlen4.h (FUNC_TEST): Remove macro. * math/test-float-vlen8.h (FUNC_TEST): Remove macro. * math/test-math-vector.h (FUNC_TEST): New macro. (WRAPPER_DECL): Rename to WRAPPER_DECL_f. * sysdeps/x86_64/fpu/Makefile (double-vlen2-funcs): New variable. (double-vlen4-funcs): Likewise. (double-vlen4-avx2-funcs): Likewise. (double-vlen8-funcs): Likewise. (float-vlen4-funcs): Likewise. (float-vlen8-funcs): Likewise. (float-vlen8-avx2-funcs): Likewise. (float-vlen16-funcs): Likewise. (CFLAGS-test-double-vlen4-avx2.c): Remove variable. (CFLAGS-test-float-vlen8-avx2.c): Likewise. * sysdeps/x86_64/fpu/test-double-vlen4.h (TEST_VECTOR_cos): Remove macro. (TEST_VECTOR_sin): Likewise. (TEST_VECTOR_sincos): Likewise. (TEST_VECTOR_log): Likewise. (TEST_VECTOR_exp): Likewise. (TEST_VECTOR_pow): Likewise. * sysdeps/x86_64/fpu/test-double-vlen8.h (TEST_VECTOR_cos): Likewise. (TEST_VECTOR_sin): Likewise. (TEST_VECTOR_sincos): Likewise. (TEST_VECTOR_log): Likewise. (TEST_VECTOR_exp): Likewise. (TEST_VECTOR_pow): Likewise. * sysdeps/x86_64/fpu/test-float-vlen16.h (TEST_VECTOR_cosf): Likewise. (TEST_VECTOR_sinf): Likewise. (TEST_VECTOR_sincosf): Likewise. (TEST_VECTOR_logf): Likewise. (TEST_VECTOR_expf): Likewise. (TEST_VECTOR_powf): Likewise. * sysdeps/x86_64/fpu/test-float-vlen8.h (TEST_VECTOR_cosf): Likewise. (TEST_VECTOR_sinf): Likewise. (TEST_VECTOR_sincosf): Likewise. (TEST_VECTOR_logf): Likewise. (TEST_VECTOR_expf): Likewise. (TEST_VECTOR_powf): Likewise. * math/gen-libm-have-vector-test.sh: Remove file. * math/libm-test.inc: Likewise. * math/libm-test-support-double.c: Likewise. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/test-double-finite.c: Likewise.: Likewise. * math/test-double.c: Likewise. * math/test-float-finite.c: Likewise. * math/test-float.c: Likewise. * math/test-idouble.c: Likewise. * math/test-ifloat.c: Likewise. * math/test-ildouble.c: Likewise. * math/test-ldouble-finite.c: Likewise. * math/test-ldouble.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen2.h: Likewise. * sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise. * sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen16.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen4.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen4.h: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8-avx2.c: Likewise. * sysdeps/x86_64/fpu/test-float-vlen8.c: Likewise.
2017-02-14	Move INIT_ARCH_EXT call from libm-test-support to libm-test-driver.	Joseph Myers
	libmvec tests involve calling INIT_ARCH_EXT during initialization then CHECK_ARCH_EXT before testing each function to see if the processor being used for testing supports the required instruction set extensions. After my refactoring of libm-test infrastructure, the INIT_ARCH_EXT call is in libm-test-support.c, built only once per floating-point type. Now, in fact all definitions of this macro are empty, but given that the definitions in sysdeps/x86_64/fpu/math-tests-arch.h are conditional on REQUIRE_* macros defined in particular vector tests, it seems more correct for the INIT_ARCH_EXT call to go instead in libm-test-driver.c which gets built separately with those REQUIRE_* macros properly defined. This patch moves the call there. Tested for x86_64 and x86. * math/libm-test-support.h: Do not include <math-tests-arch.h> here. * math/libm-test-support.c (libm_test_init): Do not call INIT_ARCH_EXT here. * math/libm-test-driver.c: Include <math-tests-arch.h>. (main): Call INIT_ARCH_EXT.
2017-02-08	Build most libm-test support code once per type.	Joseph Myers
	libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-06	Refactor some code in libm-test-driver.c.	Joseph Myers
	Splitting libm tests by function will mean about a thousand such tests built separately instead of the present nine (plus vector variants). When this is done, it's desirable to avoid needing to build all the test infrastructure so many times. Also, simply including libm-test-driver.c as-is into per-function tests doesn't actually work, because the various check_* functions are not used by all tests and so generate errors for unused static functions. Although some pieces of infrastructure depend on the type being tested while others don't, building once per type seems the simplest approach. This patch makes changes to libm-test-driver.c in preparation for that. Various cases where functions directly use macros such as TEST_ERRNO (that may vary depending on things other than the type under test) are changed to use variables initialized using those macros, while most of the code in main is moved out to functions libm_test_init and libm_test_fini. The idea is that all the functions in libm-test-driver.c will be moved out in a subsequent patch to be built once per type (and be no longer static when they are used from per-function tests), while libm-test-driver.c remains containing definitions of various variables (no longer static, of course, because they'll be used in the per-type code) and the main function. Declarations / macros relevant to both the once-per-type code and the per-function tests will go in a shared header. Tested for x86_64. * math/libm-test-driver.c (flag_test_errno): New variable. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (ulp_idx): Likewise. (qtype_str): Likewise. (ULP_IDX): Remove macro. (QTYPE_STR): Likewise. (find_ulps): Use ulp_idx not ULP_IDX. (print_function_ulps): Use qtype_str, printed with %s, not QTYPE_STR, printed with concatentation to format string. (print_complex_function_ulps): Likewise. (test_exceptions): Use flag_test_exceptions not TEST_EXCEPTIONS. (test_errno): Use flag_test_errno not TEST_ERRNO. (enable_test): Use flag_test_inline, flag_test_finite and flag_test_mathvec instead of TEST_INLINE, TEST_FINITE and TEST_MATHVEC. (libm_test_init): New function. Factored out of main. (libm_test_finish): Likewise. (main): Call libm_test_init and libm_test_finish and move most code to those functions.
2017-02-06	Move libm-test TEST_MSG definitions to libm-test-driver.c.	Joseph Myers
	Various files using the libm-test infrastructure define a TEST_MSG macro with an informal description of the tests being run. This patch moves this macro to libm-test-driver.c (the definition depending on other macros already defined), so files specific to (type, choice of whether to test inline functions or finite-math-only functions, vector length) no longer need to define it. This is in preparation for replacing files such as test-float.c with per-function test-float-<func>.c etc. automatically generated in the build directory when tests are run. Tested for x86_64. * math/libm-test-driver.c (STRX): New macro. (STR): Likewise. (STR_FLOAT): Likewise. (STR_VEC_LEN): Likewise. (TEST_MSG): Likewise. Define here instead of expecting to be defined by including file. * math/test-double-finite.c (TEST_MSG): Remove macro. * math/test-double-vlen2.h (TEST_MSG): Likewise. * math/test-double-vlen4.h (TEST_MSG): Likewise. * math/test-double-vlen8.h (TEST_MSG): Likewise. * math/test-double.c (TEST_MSG): Likewise. * math/test-float-finite.c (TEST_MSG): Likewise. * math/test-float-vlen16.h (TEST_MSG): Likewise. * math/test-float-vlen4.h (TEST_MSG): Likewise. * math/test-float-vlen8.h (TEST_MSG): Likewise. * math/test-float.c (TEST_MSG): Likewise. * math/test-idouble.c (TEST_MSG): Likewise. * math/test-ifloat.c (TEST_MSG): Likewise. * math/test-ildouble.c (TEST_MSG): Likewise. * math/test-ldouble-finite.c (TEST_MSG): Likewise. * math/test-ldouble.c (TEST_MSG): Likewise.
2017-02-06	Move non-function-specific parts of libm-test.inc to separate file.	Joseph Myers
	libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.