| Age | Commit message (Collapse) | Author |
|---|
|
@var is intended for placeholders (such as function parameters).
Actual variables need to use @code because @var causes upper-case
output, resulting in a different C identifier.
|
|
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
|
|
This patch concludes filling out TS 18661-3 support for different
types by adding *f32 function aliases of float functions to support
_Float32. As with _Float64 and _Float32x, this is supported for all
glibc configurations. As with the previous such patches there are
some x86 ulps updates because of inline functions present for float
but not for _Float32. The patch also has the usual
bits/floatn-common.h update, symbol versions, ABI baselines updates,
test enablement and documentation.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT32): Define to 1.
* manual/math.texi (Mathematics): Document support for _Float32.
* math/Makefile (test-types): Add float32.
* math/Versions (GLIBC_2.27): Add _Float32 functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
|
|
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
|
|
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
|
|
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
|
|
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch enables float128 support for ia64, so that all the
configurations where GCC supports _Float128 / __float128 as an
ABI-distinct type now have glibc support as well. bits/floatn.h
declares the support to be available for GCC 4.4 and later, which is
when the libgcc support was added. The removal of
sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c
defines a function required by the float128 code.
Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6
and GCC 7).
Given how long it is since libm-test-ulps has been updated for ia64, I
think truncating the file and regenerating it from scratch would be a
good idea when doing a regeneration to add float128 ulps. I expect
various ia64 libm issues (at least some already filed in Bugzilla) to
result in test failures even after ulps regeneration, but hopefully
the float128 code will pass tests as it's the same as used on other
architectures.
* sysdeps/ia64/Implies: Add ieee754/float128.
* sysdeps/ia64/bits/floatn.h: New file.
* sysdeps/ia64/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on ia64.
* sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to
Makefile variable.
* sysdeps/ia64/fpu/e_sqrtf128.c: New file.
* sysdeps/ia64/fpu/k_rem_pio2.c: Remove file.
* sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc.
* sysdeps/ia64/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define
based on TEST_COND_binary128 for [__ia64__].
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise,
|
|
This patch enables float128 support for x86_64 and x86. All GCC
versions that can build glibc provide the required support, but since
GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN
tests and some tests of NaN payloads need to be disabled with such
compilers (this does not affect the generated glibc binaries at all,
just the tests). bits/floatn.h declares float128 support to be
available for GCC versions that provide the required libgcc support
(4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd);
compilation-only support was present some time before then, but not
really useful without the libgcc functions.
fenv_private.h needed updating to avoid trying to put _Float128 values
in registers. I make no assertion of optimality of the
math_opt_barrier / math_force_eval definitions for this case; they are
simply intended to be sufficient to work correctly.
Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was
compilation tests only with build-many-glibcs.py to verify the ABI
baseline updates. I have not done any testing for Hurd, although the
float128 support is enabled there as for GNU/Linux.)
* sysdeps/i386/Implies: Add ieee754/float128.
* sysdeps/x86_64/Implies: Likewise.
* sysdeps/x86/bits/floatn.h: New file.
* sysdeps/x86/float128-abi.h: Likewise.
* manual/math.texi (Mathematics): Document support for _Float128
on x86_64 and x86.
* sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>.
(math_opt_barrier): Do not put _Float128 values in floating-point
registers.
(math_force_eval): Likewise.
[__x86_64__] (SET_RESTORE_ROUNDF128): New macro.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append
to Makefile variable.
* sysdeps/x86/fpu/e_sqrtf128.c: New file.
* sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc.
* sysdeps/x86/math-tests.h: New file.
* math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro.
* math/libm-test-getpayload.inc (getpayload_test_data): Use
XFAIL_FLOAT128_PAYLOAD.
* math/libm-test-setpayload.inc (setpayload_test_data): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data):
Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
|
|
* manual/math.texi: Fix a grammatical error.
|
|
The functions defined in ISO/IEC TS 18661-3 take floating-point arguments
and return floating-point numbers of _FloatN and _FloatNx types. Apart
from the type, these functions behave the same as their float, double, and
long double counterparts. This patch adds the newer functions to the
manual.
* manual/arith.texi (Infinity and NaN): Document SNANFN and SNANFNx.
(Error Reporting by Mathematical Functions): Document HUGE_VAL_FN
and HUGE_VAL_FNx.
(Absolute Value): Document fabsfN, fabsfNx, cabsfN, cabsfNx.
Rephrase the paragraph that mentions that fabs, fabsf, and fabsl
are in math.h, to avoid having to list the _FloatN and _FloatNx
variants as well. Likewise for the cabs functions.
(Normalization Functions): Document frexpfN, frexpfNx, ldexpfN,
ldexpfNx, scalbnfN, scalbnfNx, scalblnfN, scalblnfNx.
Mention that _FloatN and _FloatNx variants of scalbn and scalbln
come from TS 18661-3, since this section explicitly states that
these functions come from BSD.
(Rounding Functions): Document ceilfN, ceilfNx, floorfN, floorfNx,
truncfN, truncfNx, rintfN, rintfNx, nearbyintfN, nearbyintfNx,
roundfN, roundfNx, roundevenfN, roundevenfNx, lrintfN, lrintfNx,
llrintfN, llrintfNx, lroundfN, lroundfNx, llroundfN, llroundfNx,
fromfpfN, fromfpfNx, ufromfpfN, ufromfpfNx, fromfpxfN, fromfpxfNx,
ufromfpxfN, ufromfpxfNx, modffN, modffNx.
(Remainder Functions): Document fmodfN, fmodfNx, remainderfN,
remainderfNx.
(Setting and modifying single bits of FP values): Document
copysignfN, copysignfNx, nextafterfN, nextafterfNx, nextupfN,
nextupfNx, nextdownfN, nextdownfNx, nanfN, nanfNx, canonicalizefN,
canonicalizefNx, getpayloadfN, getpayloadfNx, setpayloadfN,
setpayloadfNx, setpayloadsigfN, setpayloadsigfNx.
(Floating-Point Comparison Functions): Document totalorderfN,
totalorderfNx, totalordermagfN, totalordermagfNx.
(Miscellaneous FP arithmetic functions): Document fminfN, fminfNx,
fmaxfN, fmaxfNx, fminmagfN, fminmagfNx, fmaxmagfN, fmaxmagfNx,
fdimfN, fdimfNx, fmafN, fmafNx.
(Complex Numbers): Document the complex types: _FloatN complex and
_FloatNx complex.
(rojections, Conjugates, and Decomposing of Complex Numbers):
Document crealfN, crealfNx, cimagfN, cimagfNx, conjfN, conjfNx,
cargfN, cargfNx, cprojfN, cprojfNx.
* manual/math.texi (Mathematics): Mention that the _FloatN and
_FloatNx variants of the math functions come from TS 18661-3,
unless otherwise stated.
(Predefined Mathematical Constants): Document the _FloatN and
_FloatNx variants of the macros prefixed with M_.
(Trigonometric Functions): Document sinfN, sinfNx, cosfN, cosfNx,
tanfN, tanfNx, sincosfN, sincosfNx, csinfN, csinfNx, ccosfN,
ccosfNx, ctanfN, ctanfNx.
(Inverse Trigonometric Functions): Document asinfN, asinfNx,
acosfN, acosfNx, atanfN, atanfNx, atan2fN, atan2fNx.
(Exponentiation and Logarithms): Document expfN, expfNx, exp2fN,
exp2fNx, exp10fN, exp10fNx, logfN, logfNx, log10fN, log10fNx,
log2fN, log2fNx, logbfN, logbfNx, ilogbfN, ilogbfNx, llogbfN,
llogbfNx, powfN, powfNx, sqrtfN, sqrtfNx, cbrtfN, cbrtfNx, hypotfN,
hypotfNx, expm1fN, expm1fNx, log1pfN, log1pfNx, cexpfN, cexpfNx,
clogfN, clogfNx, clog10fN, clog10fNx, csqrtfN, csqrtfNx, cpowfN,
cpowfNx.
(Hyperbolic Functions): sinhfN, sinhfNx, coshfN, coshfNx, tanhfN,
tanhfNx, csinhfN, csinhfNx, ccoshfN, ccoshfNx, ctanhfN, ctanhfNx,
asinhfN, asinhfNx, acoshfN, acoshfNx, atanhfN, atanhfNx, casinhfN,
casinhfNx, cacoshfN, cacoshfNx, catanhfN, catanhfNx.
(Special Functions): Document erffN, erffNx, erfcfN, erfcfNx,
lgammafN, lgammafNx, lgammarfN_r, lgammafNx_r, tgammafN, tgammafNx,
j0fN, j0fNx, j1fN, j1fNx, jnfN, jnfNx, y0fN, y0fNx, y1fN, y1fNx,
ynfN, ynfNx.
|
|
The Summary is now generated from @standards, and syntax-checking is
performed. If invalid @standards syntax is detected, summary.pl will
fail, reporting all errors. Failure and error reporting is disabled
for now, however, since much of the manual is still incomplete
wrt. header and standards annotations.
Note that the sorting order of the Summary has changed; summary.pl
respects the locale, like summary.awk did, but the use of LC_ALL=C is
introduced in the Makefile. Other notable deviations are improved
detection of the annotated elements' names, which are used for
sorting, and improved detection of the @node used to reference into
the manual. The most noticeable difference in the rendered Summary is
that entries may now contain multiple lines, one for each header and
standard combination.
summary.pl accepts a `--help' option, which details the expected
syntax of @standards. If errors are reported, the user is directed to
this feature for further information.
* manual/Makefile: Generate summary.texi with summary.pl.
Force use of the C locale. Update Perl dependency comment.
* manual/header.texi: Update reference to summary.awk.
* manual/macros.texi: Refer authors to `summary.pl --help'.
* manual/summary.awk: Remove file.
* manual/summary.pl: New file. Generate summary.texi, and
check for @standards-related syntax errors.
* manual/argp.texi: Convert header and standards @comments to
@standards.
* manual/arith.texi: Likewise.
* manual/charset.texi: Likewise.
* manual/conf.texi: Likewise.
* manual/creature.texi: Likewise.
* manual/crypt.texi: Likewise.
* manual/ctype.texi: Likewise.
* manual/debug.texi: Likewise.
* manual/errno.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/getopt.texi: Likewise.
* manual/job.texi: Likewise.
* manual/lang.texi: Likewise.
* manual/llio.texi: Likewise.
* manual/locale.texi: Likewise.
* manual/math.texi: Likewise.
* manual/memory.texi: Likewise.
* manual/message.texi: Likewise.
* manual/pattern.texi: Likewise.
* manual/pipe.texi: Likewise.
* manual/process.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/search.texi: Likewise.
* manual/setjmp.texi: Likewise.
* manual/signal.texi: Likewise.
* manual/socket.texi: Likewise.
* manual/startup.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/string.texi: Likewise.
* manual/sysinfo.texi: Likewise.
* manual/syslog.texi: Likewise.
* manual/terminal.texi: Likewise.
* manual/threads.texi: Likewise.
* manual/time.texi: Likewise.
* manual/users.texi: Likewise.
|
|
* manual/math.texi (Mathematics): Add description for _FloatN and
_FloatNx types and mentions that they are not support in glibc for
any architecture, so far.
* manual/arith.texi (wcstof, wcstold): Replace the mention to
stdlib.h with wchar.h.
(Parsing of Floats): Add descriptions for strtofN and wcstofN.
(Printing of Floats): Add description for strfromfN.
|
|
manual/libm-err-tab.pl contains a hardcoded list of libm functions for
which ulps are listed in the manual, and another hardcoded list in a
comment of functions deliberately excluded because of an expected lack
of ulps (and the two together are not in fact an exhaustive list of
libm functions tested through the libm-test machinery).
This patch removes these hardcoded lists, so eliminating this from the
places needing updating when a new libm function is added. Instead,
ulps are tabulated for functions for which they are seen in
libm-test-ulps files, in alphabetical order. The pseudo-function
names such as *_downward and *_vlen* are excluded since they are
excluded from the existing lists, and the description in the manual is
updated to explain how those entries are excluded and if a function is
not listed at all it does not have known errors.
Tested for x86_64.
* manual/libm-err-tab.pl (@all_functions): Change to
%all_functions. Initialize as empty.
(parse_ulps): Add to %all_functions based on functions found in
ulps files. Ignore results for non-default rounding modes and
vector functions.
(print_platforms): Use %all_platforms.
* manual/math.texi (Errors in Math Functions): Document omissions
from the table.
|
|
|
|
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
|
|
Bug 19673 reports that the documentation of clog10 is incorrect, both
failing to include the division by log (10) in the imaginary part and,
in the non-TeX version of the equation only, describing the LHS as log
rather than log10.
This patch fixes both issues. Note: I think it's appropriate that the
LHS says log10 not clog10, and that the cexp and clog descriptions
referred to in a comment in that bug report similarly say exp and log;
this is a mathematical description not a literal C one.
Tested for x86_64.
[BZ #19673]
* manual/math.texi (Exponents and Logarithms): Correct description
of clog10.
|
|
2016-05-06 Rical Jasan <ricaljasan@pacific.net>
* manual/math.texi: Fix typos in the manual.
|
|
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
|
|
A large number of the test-ldouble failures seen for ldbl-128ibm are
spurious "underflow" and "inexact" exceptions. These arise from such
exceptions in the underlying arithmetic; unlike other spurious
exceptions from that arithmetic, they do not in general relate to
cases where the returned result is also substantially inaccurate, are
not so readily avoidable by appropriately conditional libgcc patches,
and are widespread enough to be hard to handle through individual
XFAILing of the affected tests.
Thus, this patch documents relaxed accuracy goals for libm functions
for IBM long double and makes libm-test.inc reflect these spurious
exceptions in ldbl-128ibm arithmetic and always allow them in
ldbl-128ibm testing (while still not allowing these exceptions to be
missing where required to be present). Tested for powerpc.
* manual/math.texi (Errors in Math Functions): Document relaxed
accuracy goals for IBM long double.
* math/libm-test.inc (test_exceptions): Always allow spurious
"underflow" and "inexact" exceptions for IBM long double.
|
|
This patch refines the math.texi documentation of the goals for when
libm function raise the inexact and underflow exceptions. The
previous text was problematic in some cases around the underflow
threshold.
* Strictly, it would have meant that if the mathematical result of pow
was very slightly below DBL_MIN, for example, it was required to
raise the underflow exception; although normally a few ulps error
would be OK, if that error meant the computed value was slightly
above DBL_MIN it would fail the previously described underflow
exception goal.
* Similarly, strict IEEE semantics would imply that sin (DBL_MIN), in
round-to-nearest mode, underflows on before-rounding but not
after-rounding architectures, while returning DBL_MIN; the previous
wording would have required an underflow exception, so preventing
checks for a result with absolute value below DBL_MIN from being
sufficient checks to determine whether the exception is required.
(Under the previous wording, checks for a result with absolute value
<= DBL_MIN wouldn't have been sufficient either, because in
FE_TOWARDZERO mode a result of DBL_MIN definitely does not result
from an underflowing infinite-precision result.)
* The previous wording about rounding infinite-precision values could
be taken to mean all exceptions including "inexact" must be
consistent with some such value. That would mean that a result of
DBL_MIN in FE_UPWARD mode with "inexact" raised must also have
"underflow" raised on before-rounding architectures. Again, that
would cause problems for computing a result (possibly with spurious
"inexact" exceptions) and then using a rounding-mode-independent
test for results with absolute value below DBL_MIN to determine
whether an underflow exception must be forced in case the underflows
from intermediate computations happened to be exact.
By refining the documentation, this patch avoids stating goals for
accuracy close to the underflow threshold that were stricter than
applied anywhere else, and allows the implementation strategy of:
compute a result within a few ulps, taking care to avoid underflows in
intermediate computations, then force an underflow exception if that
result was subnormal. Only fully-defined functions such as fma need
to take greater care about the exact underflow threshold (including
its dependence on whether the architecture is before-rounding or
after-rounding, and on the rounding mode on after-rounding
architectures).
(If the rounding mode is changed as part of the computation, it's
still necessary to ensure that not just intermediate computations, but
the final computation of the result to be returned, do not raise
underflow if that result is the least normal value and underflow would
be inconsistent with the original rounding mode. Since such code can
readily discard exceptions as part of saving and restoring the
rounding mode - SET_RESTORE_ROUND_NOEX etc. - I don't think that
should be a problem in practice.)
* manual/math.texi (Errors in Math Functions): Clarify goals
regarding inexact and underflow exceptions.
|
|
Minor formatting fix that was carried by issuing
sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
|
|
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* manual/math.texi (BSD Random): Fix a typo: s/are/is/
|
|
* manual/creature.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/math.texi: Likewise.
* manual/memory.texi: Likewise.
* manual/resource.texi: Likewise.
* manual/syslog.texi: Likewise.
* manual/time.texi: Likewise.
|
|
* manual/contrib.texi (Contributors): Fix cross reference.
* manual/libc.texinfo (Copying): Include freemanuals.
* manual/Makefile (appendices): Add freemanuals.
* manual/freemanuals.texi: New file.
Patch by Brian Youmans <3diff@gnu.org>.
* manual/libm-err-tab.pl: Pretty print more platforms, print a
smaller table.
* manual/math.texi (Errors in Math Functions): Fix grammar, start
table on separate page.
Patch by Brian Youmans <3diff@gnu.org>.
|
|
2001-04-09 Ulrich Drepper <drepper@redhat.com>
* Makefile (distribute): Add scripts/documented.sh.
* scripts/documented.sh: New file.
|
|
* sysdeps/unix/i386/i686/tempname.c: New file.
* sysdeps/posix/tempname.c (__gen_tempname): If RANDOM_BITS is
defined use this macro to get some bits of randomness instead of
the usual gettimeofday or time calls.
2001-03-16 Paul Eggert <eggert@twinsun.com>
* sysdeps/posix/tempname.c (uint64_t): Define to uintmax_t if
not defined, and if UINT64_MAX is not defined.
2001-03-19 Ulrich Drepper <drepper@redhat.com>
|
|
|
|
2000-08-20 Ulrich Drepper <drepper@redhat.com>
* time/tst-getdate.c (main): Make error messages more human readable.
* sysdeps/powerpc/fpu_control.h (_FPU_GETCW): Allow gcc to generic
postinc/postdec instruction.
(_FPU_SETCW): Likewise.
Patch by Franz Sirl <Franz.Sirl-kernel@lauterbach.com>.
|
|
2000-05-22 Andreas Jaeger <aj@suse.de>
* math/Makefile: Add -D__FAST_MATH__ to CFLAGS-test-ifloat.c,
CFLAGS-test-idouble.c, CFLAGS-test-ildoubl.c.
* manual/math.texi (FP Function Optimizations): Document gcc
-ffast-math behaviour with mathinlines.
* sysdeps/i386/fpu/bits/mathinline.h: Only use save inline
functions unless -ffast-math is given to gcc.
|
|
* manual/Makefile (chapters): Add syslog.
* manual/syslog.texi: New file.
* manual/math.texi: Fix references.
* manual/terminal.texi: Likewise.
Patch by Bryan Henderson <bryanh@giraffe-data.com>.
2000-04-18 Jakub Jelinek <jakub@redhat.com>
* posix/sys/wait.h: Define __WAIT_STATUS and the like either if
stdlib.h was not included or __USE_XOPEN not defined.
2000-04-23 Ulrich Drepper <drepper@redhat.com>
|
|
1999-10-31 Ulrich Drepper <drepper@cygnus.com>
* includes/features.h: Replace __USE_ISOC9X by __USE_ISOC99 and also
recognize _ISOC99_SOURCE.
* libio/stdio.h: Likewise.
* math/math.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* math/stdio.h: Likewise.
* stdlib/stdlib.h: Likewise.
* sysdeps/alpha/fpu/bits/mathdef.h: Likewise.
* sysdeps/alpha/fpu/bits/mathinline.h: Likewise.
* sysdeps/arm/bits/huge_val.h: Likewise.
* sysdeps/generic/bits/mathdef.h: Likewise.
* sysdeps/i386/bits/huge_val.h: Likewise.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
* sysdeps/i386/fpu/bits/mathinline.h: Likewise.
* sysdeps/ieee754/bits/huge_val.h: Likewise.
* sysdeps/m68k/bits/huge_val.h: Likewise.
* sysdeps/m68k/fpu/bits/mathdef.h: Likewise.
* sysdeps/m68k/fpu/bits/mathinline.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathinline.h: Likewise.
* sysdeps/sparc/fpu/bits/mathdef.h: Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Likewise.
* sysdeps/sparc/sparc32/fpu/bits/huge_val.h: Likewise.
* wcsmbs/wchar.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Moved to...
* sysdeps/powerpc/fpu/bits/mathdef.h: ...here.
* sysdeps/powerpc/bits/mathinline.h: Moved to...
* sysdeps/powerpc/fpu/bits/mathinline.h: ...here.
1999-10-31 Andreas Jaeger <aj@suse.de>
* manual/math.texi (Errors in Math Functions): Correct TeX code.
1999-10-31 Andreas Jaeger <aj@suse.de>
* math/libm-test.inc: Change comments to use ISO C99 instead of
ISO C9x.
* math/w_lgamma.c: Likewise.
* math/w_lgammaf.c: Likewise.
* math/w_lgammal.c: Likewise.
* math/test-fenv.c: Likewise.
* sysdeps/ieee754/ldbl-96/printf_fphex.c: Likewise.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Likewise.
* sysdeps/generic/printf_fphex.c: Likewise.
1999-10-31 Andreas Jaeger <aj@suse.de>
* manual/arith.texi (Parsing of Floats): Remove C from ISO C comment.
* manual/math.texi: Change ISO C9x to ISO C99.
* manual/startup.texi: Likewise.
* manual/stdio.texi: Likewise.
1999-10-31 Andreas Jaeger <aj@suse.de>
* manual/arith.texi: Change ISO C9x to ISO C99.
* manual/time.texi (Low-Level Time String Parsing): Likewise.
|
|
* manual/math.texi (Errors in Math Functions): New section.
* math/libm-err-tab.pl: Moved to...
* manual/libm-err-tab.pl: ...here.
* manual/Makefile: Add rules for math function error table generation.
|
|
1999-08-27 Ulrich Drepper <drepper@cygnus.com>
* manual/argp.texi: Fixing language and types.
* manual/conf.texi: Likewise.
* manual/contrib.texi: Likewise.
* manual/filesys.texi: Likewise.
* manual/install.texi: Likewise.
* manual/job.texi: Likewise.
* manual/lang.texi: Likewise.
* manual/llio.texi: Likewise.
* manual/math.texi: Likewise.
* manual/nss.texi: Likewise.
* manual/pipe.texi: Likewise.
* manual/signal.texi: Likewise.
* manual/socket.texi: Likewise.
* manual/stdio.texi: Likewise.
* manual/sysinfo.texi: Likewise.
* manual/users.texi: Likewise.
Patches by Neil Booth <NeilB@earthling.net>.
|
|
1999-07-27 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/math.texi (FP Function Optimization): Mention drawbacks.
|
|
1998-12-12 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* timezone/Makefile: Protect inclusion of z.* by avoid-generated
and inhibit_timezone_rules instead of no_deps.
* Make-dist: Pass inhibit_timezone_rules=t when making
echo-distinfo.
1998-12-12 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* manual/Makefile (distribute): Remove dir-add.texinfo.
* sysdeps/unix/sysv/linux/powerpc/Dist: Add sys/procfs.h and
sys/user.h.
1998-12-11 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* manual/Makefile (stamp-summary): Use ^L as separator for
sorting.
* manual/arith.texi: Add comments before all @deffoox lines to get
them added to the summary.
* manual/creature.texi: Likewise.
* manual/math.texi: Likewise.
1998-12-13 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* math/libm-test.c: Remove macro ISINF. Change all usages of
ISINF to isinf.
1998-12-13 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/alpha/fpu/fsetexcptflg.c: Avoid -Wparentheses warning.
* sysdeps/libm-ieee754/s_expm1.c (__expm1): Avoid -Wparentheses
warning.
* sysdeps/libm-ieee754/s_log1p.c (__log1p): Likewise.
* sysdeps/libm-ieee754/e_logf.c (__ieee754_logf): Likewise.
* sysdeps/libm-ieee754/s_expm1f.c (__expm1f): Likewise.
* sysdeps/libm-ieee754/e_log.c (__ieee754_log): Likewise.
* sysdeps/libm-ieee754/s_log1pf.c (__log1pf): Likewise.
1998-12-13 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sunrpc/svc_udp.c (svcudp_bufcreate): Declare len as socklen_t.
(svcudp_recv): Likewise.
1998-12-13 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
* nis/nss-nisplus.h: Change some mappings of NIS+ errors to
NSS error codes to avoid endless loops.
1998-12-12 Geoff Keating <geoffk@ozemail.com.au>
* posix/fnmatch.c (fnmatch): Arguments to FOLD must not have
side-effects.
|
|
1998-07-29 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* manual/pattern.texi (More Flags for Globbing): Fix typo.
* manual/math.texi (Special Functions): Fix typo.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_ROUTER_ALERT): New
constant from Linux 2.1.112.
* posix/Makefile (install-lib): Compile libposix.a only if
build-static == yes.
1998-07-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* sysdeps/generic/glob.c: Maintain const correctness. Move extern
declarations to file level. Cope with unsupported
_SC_GETPW_R_SIZE_MAX.
1998-07-29 Ulrich Drepper <drepper@cygnus.com>
* stdio-common/tst-printf.c: %z is now recognized by printf.
* sysdeps/libm-ieee754/c_csqrt.c: Fix problems with some cancelation
errors.
* sysdeps/libm-ieee754/c_csqrtf.c: Likewise.
* sysdeps/libm-ieee754/c_csqrtlc: Likewise.
Patch by Stephen L Moshier <moshier@mediaone.net>.
* math/libm-test.c (csqrt_test): Correct typo in one test, add
another one.
* sysdeps/unix/sysv/linux/bits/siginfo.h: Adjust siginfo_t after
latest kernel change.
|
|
1998-07-28 Ulrich Drepper <drepper@cygnus.com>
* math/libm-test.c (tgamma_test): Remove redundant tests.
1998-07-28 16:20 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/generic/glob.c: Correct problems with */foo and GLOB_NOCHECK
where foo does not exist in any of the subdirectories.
Reported by Paul D. Smith <psmith@BayNetworks.COM>.
* posix/globtest.sh: Add test for this bug.
1998-07-28 Mark Kettenis <kettenis@phys.uva.nl>
* io/sys/statfs.h: Fix typos.
* io/sys/statvfs.h: Fix typos.
1998-07-28 Ulrich Drepper <drepper@cygnus.com>
* version.h (VERSION): Bump to 2.0.95.
* math/Makefile (libm-calls): Remove w_gamma, add w_tgamma.
* math/Versions [GLIBC_2.1]: Add tgamma, tgammaf, and tgammal.
* math/libm-test.c: Split old gamma_test and move half of it in new
function tgamma_test.
* math/bits/mathcalls.h: Add declaration of tgamma.
* sysdeps/libm-ieee754/k_standard.c: Change gamma errors into
tgamma errors.
* sysdeps/libm-ieee754/w_gamma.c: Remove lgamma compatibility code
and rename to ...
* sysdeps/libm-ieee754/w_tgamma.c: ... this. New file.
* sysdeps/libm-ieee754/w_gammaf.c: Remove lgammaf compatibility code
and rename to ...
* sysdeps/libm-ieee754/w_tgammaf.c: ... this. New file.
* sysdeps/libm-ieee754/w_gammal.c: Remove lgammal compatibility code
and rename to ...
* sysdeps/libm-ieee754/w_tgammal.c: ... this. New file.
* sysdeps/libm-ieee754/w_lgamma.c: Add gamma as weak alias.
* sysdeps/libm-ieee754/w_lgammaf.c: Likewise.
* sysdeps/libm-ieee754/w_lgammal.c: Likewise.
* stgdio-common/printf-parse.h: Implement handling of j, t, and z
modifiers.
* stdio-common/vfprintf.c: Likewise.
* stdio-common/vfscanf.c: Likewise.
* manual/stdio.texi: Document new printf/scanf modifiers.
* sysdeps/unix/sysv/linux/recvmsg.c: Remove alias __recvmsg.
* sysdeps/unix/sysv/linux/sendmsg.c: Remove alias __sendmsg.
1998-07-28 Thorsten Kukuk <kukuk@vt.uni-paderborn.de>
* sunrpc/Makefile (routines): Add clnt_unix and svc_unix.
* sunrpc/Versions: Add new *unix_create functions.
* sunrpc/clnt_gen.c: Add support for RPC over AF_UNIX.
* sunrpc/clnt_unix.c: New, client side of RPC over AF_UNIX.
* sunrpc/key_call.c: Use RPC over AF_UNIX for communication
with keyserv daemon.
* sunrpc/rpc/clnt.h: Add AF_UNIX based RPC function prototypes.
* sunrpc/rpc/svc.h: Likewise.
* sunrpc/svc_authux.c: Copy internal auth flavor if none is given.
* sunrpc/svc_tcp.c: Fix typos.
* sunrpc/svc_unix.c: New, server side of AF_UNIX based RPC.
* nis/Makefile: Remove currently not working cache functions.
* nis/Versions: Add __nisbind_* functions for rpc.nisd.
* nis/nis_call.c: Rewrite binding to a NIS+ server to reuse
CLIENT handles.
* nis/nis_file.c: Fix memory leaks.
* nis/nis_intern.h: Move internal structs from here ...
* nis/rpcsvc/nislib.h: ... to here for NIS+ server and tools.
* nis/nis_lookup.c: Try at first if last client handle works.
* nis/nis_table.c: Likewise.
* nis/nis_checkpoint.c: Adjust __do_niscall2 parameters.
* nis/nis_mkdir.c: Likewise.
* nis/nis_ping.c: Likewise.
* nis/nis_rmdir.c: Likewise.
* nis/nis_server.c: Likewise.
* nis/nis_util.c: Likewise.
* nis/nis_findserv.c (__nis_findfastest): Little optimization.
1998-07-28 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* stdlib/strtol.c (STRTOL_LONG_MAX): Correct typo in last patch -
define as LONG_MAX.
1998-07-28 09:31 Ulrich Drepper <drepper@cygnus.com>
* nscd/connections.c (gr_send_answer): Deal with missing UIO_MAXIOV.
Correct test whether writev send all data.
* nscd/nscd_getgr_r.c (__nscd_getgr_r): Correct test whether readv
received all data.
1998-07-28 Mark Kettenis <kettenis@phys.uva.nl>
* nscd/nscd_getgr_r.c (__nscd_getgr_r): Deal with missing UIO_MAXIOV.
1998-07-28 Mark Kettenis <kettenis@phys.uva.nl>
* sysdeps/mach/hurd/dl-sysdep.c (open_file): Change assert call to
allow mode to be 0.
(__xstat): New function.
(__fxstat): New function.
(_dl_sysdep_read_whole_file): Removed. The implementation in
`elf/dl-misc.c' now also works for the Hurd.
|
|
1998-07-17 Ulrich Drepper <drepper@cygnus.com>
* debug/catchsegv.sh: Fix several stupid bugs.
* shlib-versions: Define version for libSegFault.
* debug/Makefile: Replace shared lib version number while rewriting.
1998-07-17 Mark Kettenis <kettenis@phys.uva.nl>
* sysdeps/mach/hurd/dl-sysdep.c (__mmap): Add sanity check.
Suggested by Roland McGrath.
1998-07-15 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* timezone/Makefile: Remove '-L (leapseconds)' for testdata
generation to control environment.
1998-07-17 09:21 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/unix/sysv/sysv4/solaris2/bits/signum.h: Define SIG_HOLD.
Patch by John Tobey <jtobey@banta-im.com>.
* manual/llio.texi: Document readv/writev and mmap functions.
Patch by Michael Deutschmann <michael@talamasca.wkpowerlink.com>.
1998-07-16 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* manual/Makefile (texis): Depend on texis.awk.
(nonexamples): Filter out add-on chapters.
(chapters.% top-menu.%): Depend on libc-texinfo.sh.
(stamp-summary): Depend on $(texis) except summary.texi.
($(inst_infodir)/libc.info): Simplify command.
* manual/libc-texinfo.sh: Cleaned up to use less temporary files.
Fix the generation of the detailed node listing to make it
complete again.
* manual/math.texi: Fix signature of lgamma_r.
|
|
1998-07-10 18:14 -0400 Zack Weinberg <zack@rabi.phys.columbia.edu>
* manual/Makefile: Overhauled. Generate libc.texinfo from the
chapter files. Exorcise the chapters, chapters-incl mess.
Support inserting doc chapters from add-on modules.
(chapters): New variable.
(add-chapters): New variable.
(appendices): New variable.
(libc.texinfo): New target.
(clean): Fix bugs.
(realclean): Fix bugs.
* manual/texis.awk: New file.
* manual/libc-texinfo.sh: New file.
* manual/libc-texinfo.in: New file.
* manual/conf.texi (top @node): Remove next pointer.
* manual/lang.texi (top @node): Remove prev pointer.
* manual/job.texi (top @node): Add explicit pointers.
* manual/message.texi (top @node): Add explicit pointers.
* manual/nss.texi (top @node): Add explicit pointers.
* manual/process.texi (top @node): Add explicit pointers.
* manual/startup.texi (top @node): Add explicit pointers.
* manual/terminal.texi (top @node): Add explicit pointers.
* manual/users.texi (top @node): Add explicit pointers.
* manual/arith.texi: Add %MENU% tag.
* manual/conf.texi: Add %MENU% tag.
* manual/contrib.texi: Add %MENU% tag.
* manual/ctype.texi: Add %MENU% tag.
* manual/errno.texi: Add %MENU% tag.
* manual/filesys.texi: Add %MENU% tag.
* manual/header.texi: Add %MENU% tag.
* manual/install.texi: Add %MENU% tag.
* manual/intro.texi: Add %MENU% tag.
* manual/io.texi: Add %MENU% tag.
* manual/job.texi: Add %MENU% tag.
* manual/lang.texi: Add %MENU% tag.
* manual/llio.texi: Add %MENU% tag.
* manual/locale.texi: Add %MENU% tag.
* manual/maint.texi: Add %MENU% tag.
* manual/math.texi: Add %MENU% tag.
* manual/mbyte.texi: Add %MENU% tag.
* manual/memory.texi: Add %MENU% tag.
* manual/message.texi: Add %MENU% tag.
* manual/nss.texi: Add %MENU% tag.
* manual/pattern.texi: Add %MENU% tag.
* manual/pipe.texi: Add %MENU% tag.
* manual/process.texi: Add %MENU% tag.
* manual/search.texi: Add %MENU% tag.
* manual/setjmp.texi: Add %MENU% tag.
* manual/signal.texi: Add %MENU% tag.
* manual/socket.texi: Add %MENU% tag.
* manual/startup.texi: Add %MENU% tag.
* manual/stdio.texi: Add %MENU% tag.
* manual/string.texi: Add %MENU% tag.
* manual/sysinfo.texi: Add %MENU% tag.
* manual/terminal.texi: Add %MENU% tag.
* manual/time.texi: Add %MENU% tag.
* manual/users.texi: Add %MENU% tag.
1998-07-13 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (x86_cap_flags):
Update.
1998-07-11 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/recvmsg.c (__libc_recvmsg): Use ANSI
style declaration to avoid warning.
* sysdeps/unix/sysv/linux/sendmsg.c (__libc_sendmsg): Likewise.
1998-07-04 Mark Kettenis <kettenis@phys.uva.nl>
* elf/rtld.c (process_dl_debug): Add missing continue.
1998-07-12 Mark Kettenis <kettenis@phys.uva.nl>
* elf/rtld.c (_dl_skip_args): Make global because the Hurd startup
code needs it.
1998-07-10 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* Makeconfig ($(common-objpfx)sysd-dirs): Write out definition of
sysd-dirs-done.
* Makerules: Don't generate version maps too early.
($(common-objpfx)sysd-versions): Force regeneration if the list of
subdirs has changed.
1998-07-10 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/dlfcn.h (DL_CALL_FCT): Use portable comma expression.
1998-07-11 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* iconv/gconv_db.c (gen_steps): Always set *handle and *nsteps.
* iconv/gconv_dl.c (__gconv_find_shlib): Correct use of tfind
return value.
1998-07-12 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/dl-open.c (dl_open_worker): New function.
(_dl_open): Call it to do the actual work while catching errors.
* elf/dl-close.c (_dl_close): Only call termination function if
the initialisation function was called.
1998-07-13 Ulrich Drepper <drepper@cygnus.com>
* libio/libioP.h (_IO_cleanup_registration_needed): Use __PMT.
Reported by Felix von Leitner <leitner@amdiv.de>.
1998-07-13 10:28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* elf/rtld.c (process_dl_debug): Add missing continue.
1998-06-23 Mark Kettenis <kettenis@phys.uva.nl>
|
|
|
|
1998-05-19 15:58 Ulrich Drepper <drepper@cygnus.com>
* elf/rtld.c (process_envvars): Fix typo. Don't handle
LD_PROFILE_OUTPUT in SUID binaries.
* intl/dcgettext.c: In SUID binaries don't let language part of
locale value contain path elements.
* intl/explodename.h: Define new function _nl_find_language.
* intl/loadinfo.h: Declare _nl_find_language.
* locale/findlocale.c (_nl_find_locale): Use _nl_find_locale to get
language part it drop the value is path element is contained.
* locale/setlocale.c: Fix typo.
1998-05-18 Philip Blundell <Philip.Blundell@pobox.com>
* sysdeps/unix/sysv/linux/arm/socket.S: Correct handling of arguments.
* sysdeps/arm/strlen.S: Support both big and little endian processors.
* sysdeps/arm/sysdep.h (ALIGNARG): ELF .align directive uses a
log, not a byte-count.
* sysdeps/unix/arm/sysdep.S (syscall_error): Use C_SYMBOL_NAME for
a.out compatibility.
1998-05-19 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/bsd/vax/vfork.S: Fix the "the the" problems.
* sysdeps/unix/bsd/sun/m68k/vfork.S: Likewise.
* sysdeps/unix/bsd/hp/m68k/vfork.S: Likewise.
* posix/unistd.h: Likewise.
* math/math.h: Likewise.
* manual/users.texi (Manipulating the Database): Likewise.
* manual/signal.texi (Job Control Signals): Likewise.
* manual/message.texi (The gencat program): Likewise.
* manual/filesys.texi (Hard Links): Likewise.
* manual/math.texi (SVID Random): Likewise.
* manual/llio.texi (Waiting for I/O): Likewise.
* manual/io.texi (File Name Errors): Likewise.
* manual/conf.texi (String Parameters): Likewise.
* manual/arith.texi (Infinity): Likewise.
* malloc/malloc.c: Likewise.
* hurd/hurdsig.c (_hurd_internal_post_signal): Likewise.
* csu/Makefile: Likewise.
|
