aboutsummaryrefslogtreecommitdiff
path: root/manual/llio.texi
AgeCommit message (Collapse)Author
2020-12-03manual: Clarify File Access Modes section and add O_PATHFlorian Weimer
Kees Cook reported that the current text is misleading: <https://lore.kernel.org/lkml/202005150847.2B1ED8F81@keescook/>
2020-05-05manual: Document the O_NOFOLLOW open flagFlorian Weimer
2019-10-30Revise the documentation of simple calendar time.Zack Weinberg
This is a thorough revision of all the material relating to the functions time, stime, gettimeofday, settimeofday, clock_gettime, clock_getres, clock_settime, and difftime, spilling over into the discussion of time-related data types (which now get their own section) and touching the adjtime family as well (which deserves its own thorough revision, but I'd have to do a bunch of research first). Substantive changes are: * Document clock_gettime, clock_getres, and clock_settime. (Only CLOCK_REALTIME and CLOCK_MONOTONIC are documented; the others are either a bit too Linux-specific, or have more to do with measuring CPU/processor time. That section _also_ deserves its own thorough revision but again I'd have to do a bunch of research first.) * Present gettimeofday, settimeofday, and struct timeval as obsolete relative to clock_*. * Remove the documentation of struct timezone. Matching POSIX, say that the type of the second argument to gettimeofday and settimeofday is [const] void *. * Clarify ISO C and POSIX's requirements on time_t. Clarify the circumstances under which difftime is equivalent to simple subtraction. * Consolidate documentation of most of the time-related data types into a new section "Time Types," right after "Time Basics." (The exceptions are struct tm, which stays in "Broken-down Time," and struct times, which stays in "Processor And CPU Time." * The "Elapsed Time" section is now called "Calculating Elapsed Time" and includes only difftime and the discussion of how to compute timeval differences by hand. * Fold the "Simple Calendar Time," "High Resolution Calendar," and "High Accuracy Clock" sections together into two new sections titled "Getting the Time" and "Setting and Adjusting the Time."
2019-06-28io: Remove copy_file_range emulation [BZ #24744]Florian Weimer
The kernel is evolving this interface (e.g., removal of the restriction on cross-device copies), and keeping up with that is difficult. Applications which need the function should run kernels which support the system call instead of relying on the imperfect glibc emulation. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-05-17manual: Document O_DIRECTORYFlorian Weimer
2019-01-07manual: Use @code{errno} instead of @var{errno} [BZ #24063]Florian Weimer
@var is intended for placeholders (such as function parameters). Actual variables need to use @code because @var causes upper-case output, resulting in a different C identifier.
2018-06-28Fix documentation build with old makeinfoSzabolcs Nagy
With old makeinfo '@code {' fails because of the extra space. * manual/llio.texi: Remove spurious space.
2018-06-26Fix Linux fcntl OFD locks for non-LFS architectures (BZ#20251)Adhemerval Zanella
This patch fixes the OFD ("file private") locks for architectures that support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and F_{SET,GET}L{W}K64 expects a flock64 argument and when using old F_OFD_* flags with a non LFS flock argument the kernel might interpret the underlying data wrongly. Kernel idea originally was to avoid using such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS semantic as default it is possible to provide the functionality and avoid the bogus struct kernel passing by adjusting the struct manually for the required flags. The idea follows other LFS interfaces that provide two symbols: 1. A new LFS fcntl64 is added on default ABI with the usual macros to select it for FILE_OFFSET_BITS=64. 2. The Linux non-LFS fcntl use a stack allocated struct flock64 for F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided struct. 3. Keep a compat symbol with old broken semantic for architectures that do not define __OFF_T_MATCHES_OFF64_T. So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will aliased to fcntl and no adjustment would be required. So to actually use F_OFD_* with LFS support the source must be built with LFS support (_FILE_OFFSET_BITS=64). Also F_OFD_SETLKW command is handled a cancellation point, as for F_SETLKW{64}. Checked on x86_64-linux-gnu and i686-linux-gnu. [BZ #20251] * NEWS: Mention fcntl64 addition. * csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel. * login/utmp_file.c: Likewise. * sysdeps/posix/fdopendir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/unix/pt-fcntl.c: Likewise. * include/fcntl.h (__libc_fcntl64, __fcntl64, __fcntl64_nocancel_adjusted): New prototype. (__fcntl_nocancel_adjusted): Remove prototype. * io/Makefile (routines): Add fcntl64. (CFLAGS-fcntl64.c): New rule. * io/Versions [GLIBC_2.28] (fcntl64): New symbol. [GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64. * io/fcntl.h (fcntl64): Add prototype and redirect if __USE_FILE_OFFSET64 is defined. * io/fcntl64.c: New file. * manual/llio.text: Add a note for which commands fcntl acts a cancellation point. * nptl/Makefile (CFLAGS-fcntl64.c): New rule. * sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols. * sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): New symbols. * sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64, F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for non-LFS case. * sysdeps/unix/sysv/linux/fcntl64.c: New file. * sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename to __fcntl64_nocancel. (__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted. * sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename to __fcntl64_nocancel. * sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file. * sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks. (tests-internal): Add tst-ofdlocks-compat. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28] (fcntl64): New symbol. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl, fcntl64): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
2018-04-03Update RWF_SUPPORTED for Linux kernel 4.16 [BZ #22947]H.J. Lu
Add RWF_APPEND to RWF_SUPPORTED to support Linux kernel 4.16. [BZ #22947] * bits/uio-ext.h (RWF_APPEND): New. * sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_APPEND): Likewise. * manual/llio.texi: Document RWF_APPEND. * misc/tst-preadvwritev2-common.c (RWF_APPEND): New. (RWF_SUPPORTED): Add RWF_APPEND.
2018-02-02preadv2/pwritev2: Handle offset == -1 [BZ #22753]Florian Weimer
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-12-22copy_file_range: New function to copy file dataFlorian Weimer
The semantics are based on the Linux system call, but a very close emulation in user space is provided.
2017-11-23Linux: Add memfd_create system call wrapperFlorian Weimer
The system call is somewhat obscure because it is closely related to file descriptor sealing. However, it is also the recommended way to create alias mappings, which is why it has more general use. No emulation is provided. Except for the name of the /proc/self/fd links, it would be possible to implement an approximation using O_TMPFILE and tmpfs, but this does not appear to be worth the added complexity. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
2017-11-20manual: Document the MAP_HUGETLB, MADV_HUGEPAGE, MADV_NOHUGEPAGE flagsFlorian Weimer
2017-11-19manual: Document mprotect and introduce section on memory protectionFlorian Weimer
2017-11-19manual: Move preadv/writev variants to Scatter-Gather sectionFlorian Weimer
Also remove a comment about performance. fwrite vs writev performance is a very complex topic and cannot be reduced to a simple advice based on transfer size.
2017-11-04manual: Document the O_TMPFILE flagFlorian Weimer
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
2017-07-11posix: Add p{read,write}v2 RWF_NOWAIT flag (BZ#21738)Adhemerval Zanella
Linux 4.12 (b745fafaf70c0a98a2e1e7ac8cb14542889ceb0e) adds a new p{read,write}v2 flag RWF_NOWAIT. This patch adds it for linux uio-ext.h header. Checked on x86_64-linux-gnu (on a 4.10 kernel). [BZ #21738] * manual/llio.texi (RWF_NOWAIT): New item. * misc/tst-preadvwritev2-common.c (do_test_with_invalid_flags): Add RWF_NOWAIT check. * sysdeps/unix/sysv/linux/bits/uio-ext.h (RWF_NOWAIT): New flag.
2017-06-15manual: Replace summary.awk with summary.pl.Rical Jasan
The Summary is now generated from @standards, and syntax-checking is performed. If invalid @standards syntax is detected, summary.pl will fail, reporting all errors. Failure and error reporting is disabled for now, however, since much of the manual is still incomplete wrt. header and standards annotations. Note that the sorting order of the Summary has changed; summary.pl respects the locale, like summary.awk did, but the use of LC_ALL=C is introduced in the Makefile. Other notable deviations are improved detection of the annotated elements' names, which are used for sorting, and improved detection of the @node used to reference into the manual. The most noticeable difference in the rendered Summary is that entries may now contain multiple lines, one for each header and standard combination. summary.pl accepts a `--help' option, which details the expected syntax of @standards. If errors are reported, the user is directed to this feature for further information. * manual/Makefile: Generate summary.texi with summary.pl. Force use of the C locale. Update Perl dependency comment. * manual/header.texi: Update reference to summary.awk. * manual/macros.texi: Refer authors to `summary.pl --help'. * manual/summary.awk: Remove file. * manual/summary.pl: New file. Generate summary.texi, and check for @standards-related syntax errors. * manual/argp.texi: Convert header and standards @comments to @standards. * manual/arith.texi: Likewise. * manual/charset.texi: Likewise. * manual/conf.texi: Likewise. * manual/creature.texi: Likewise. * manual/crypt.texi: Likewise. * manual/ctype.texi: Likewise. * manual/debug.texi: Likewise. * manual/errno.texi: Likewise. * manual/filesys.texi: Likewise. * manual/getopt.texi: Likewise. * manual/job.texi: Likewise. * manual/lang.texi: Likewise. * manual/llio.texi: Likewise. * manual/locale.texi: Likewise. * manual/math.texi: Likewise. * manual/memory.texi: Likewise. * manual/message.texi: Likewise. * manual/pattern.texi: Likewise. * manual/pipe.texi: Likewise. * manual/process.texi: Likewise. * manual/resource.texi: Likewise. * manual/search.texi: Likewise. * manual/setjmp.texi: Likewise. * manual/signal.texi: Likewise. * manual/socket.texi: Likewise. * manual/startup.texi: Likewise. * manual/stdio.texi: Likewise. * manual/string.texi: Likewise. * manual/sysinfo.texi: Likewise. * manual/syslog.texi: Likewise. * manual/terminal.texi: Likewise. * manual/threads.texi: Likewise. * manual/time.texi: Likewise. * manual/users.texi: Likewise.
2017-05-31posix: Implement preadv2 and pwritev2Adhemerval Zanella
This patch adds support of preadv2 and pwritev2 which are similar to preadv/pwritev but with an extra flag argument. As for preadv/pwritev both interfaces are added a non-standard GNU API. For default 'posix' implementation trying to emulate the Linux supported flags is troublesome: * We can not temporary change the file state of the O_DSYNC and O_SYNC flags to emulate RWF_{D}SYNC (attempts to change the state of using fcntl are silently ignored). * IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal semantic not provided by any other flag (O_NONBLOCK for instance). So default sysdeps/posix implementations fails with EOPNOTSUPP for any non supported flag (which are none currently) calls generic preadv/pwritev. Basically this implementation supports only preadv2 called as preadv (with flags sets to 0). The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it call preadv/writev. Instead of using the previous __ASSUME_* to unconditionally issue the syscall (and avoid building the fallback routine), it call pread/write if the preadv2/pwritev2 syscalls fails. The idea is just avoid adding another __ASSUME_* and checking each architecture on every kernel bump and simplify code conditionals. Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu, nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu, sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using gcc 6.3). * NEWS: Add note about pwritev2 and preadv2 inclusion. * misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and pwritev64v2. (tests): Add tst-preadvwritev2 and tst-preadvwritev64v2. * misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and pwritev64v2. * misc/preadv2.c: New file. * misc/preadv64v2.c: Likewise. * misc/pwritev2.c: Likewise. * misc/pwritev64v2.c: Likewise. * misc/tst-preadvwritev2.c: Likewise. * misc/tst-preadvwritev64v2.c: Likewise. * manual/llio.texi: Add preadv2 and pwritev2 documentation. * misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New prototype. [__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise. [__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise. [__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise. * misc/tst-preadvwritev-common.c (PREADV): Define if not defined. (PWRITEV): Likewise. (do_test_with_offset): Use PREADV and PWRITEV macros and check for ENOSYS. * nptl/tst-cancel4.c (tf_pwritev2): New test. (tf_preadv2): Likewise. (tf_fsync): Add tf_pwritev2 and tf_preadv2. * sysdeps/posix/preadv2.c: Likewise. * sysdeps/posix/preadv64v2.c: Likewise. * sysdeps/posix/pwritev2.c: Likewise. * sysdeps/posix/pwritev64v2.c: Likewise. * sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall support in kernel. * sysdeps/unix/sysv/linux/preadv2.c: Likewise. * sysdeps/unix/sysv/linux/preadv64v2.c: Likewise. * sysdeps/unix/sysv/linux/pwritev2.c: Likewise. * sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise. * sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def. * sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise. * sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise. * sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise. * sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2 support flags on Linux. * sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, pwritev64v2. * sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26): Likewise.
2017-05-04manual: Add preadv and pwritev documentationAdhemerval Zanella
* manual/llio.texi: Add preadv and pwritev documentation.
2016-12-21manual: Convert @tables of variables to @vtables.Rical Jasan
Texinfo @vindex commands add entries to the Variable and Constant Macro Index. Similarly, @items in @vtables are automatically indexed. A number of @tables exist where all @items are @vindexed or all @items are variables, but not indexed, suggesting an optimization by converting such @tables to @vtables and dropping the @vindex. Using a @vtable provides a context for processing @items whereby it can be known the @items should have header and standards annotations. This commit converts @tables of such @items to @vtables in order to establish a framework for automated processing. A pleasant consequence of these changes is that @items previously lacking a @vindex are present in the Variable and Constant Macro Index now. @vindex entries previously detected by summary.awk will still be detected as @items with appropriate annotations. The @vtable of the NSS databases is converted to a @table because 1) those @items are not variables (and will no longer appear in the Variable and Constant Macro Index) and 2) they do not need header and standards annotations, so the incorrect context is fixed. * manual/nss.texi: Change incorrect @vtable to @table. * manual/arith.texi: Convert @tables of variables to @vtables and remove unnecessary indexing. * manual/filesys.texi: Likewise. * manual/llio.texi: Likewise. * manual/memory.texi: Likewise. * manual/process.texi: Likewise. * manual/resource.texi: Likewise. * manual/search.texi: Likewise. * manual/signal.texi: Likewise. * manual/socket.texi: Likewise. * manual/stdio.texi: Likewise. * manual/sysinfo.texi: Likewise. * manual/syslog.texi: Likewise. * manual/terminal.texi: Likewise. * manual/time.texi: Likewise. * manual/users.texi: Likewise.
2016-10-06Manual typos: Low-Level Input/OutputRical Jasan
2016-05-06 Rical Jasan <ricaljasan@pacific.net> * manual/llio.texi: Fix typos in the manual.
2015-08-20Fix exponents in manual.Ondřej Bílka
* manual/macros.texi: Add twoexp macro. * manual/filesys.texi: Fix exponents. * manual/llio.texi: Likewise. * manual/stdio.texi: Likewise.
2014-11-06manual/llio.texi: Comment on write atomicity.Carlos O'Donell
We add Linux-realted comments about the atomicity of write with respect to file offsets. As of Linux 3.14 the file offset update is atomic. That means that multiple threads calling the write syscall can not possibly get the same file offset. Therefore the writes should not overlap and data should not be lost as is required by POSIX.
2014-10-29manual/llio.texi: Add Linux-specific comments for write().Carlos O'Donell
Add Linux-specific comments about the atomicity of write() and the POSIX requirements. 2014-10-29 Carlos O'Donell <carlos@redhat.com> * manual/llio.texi: Add comments discussing why write() may be considered MT-unsafe on Linux.
2014-07-29fcntl-linux.h: add new definitions and manual updates for open file ↵Jeff Layton
description locks Open file description locks have been merged into the Linux kernel for v3.15. Add the appropriate command-value definitions and an update to the manual that describes their usage.
2014-02-26Fix two spaces after sentence.Ondřej Bílka
Minor formatting fix that was carried by issuing sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
2014-01-31* manual/llio.texi: Document MTASC-safety properties.Alexandre Oliva
2013-12-30Fix spelling in manual, as in bug 16376Ville Skytta
2013-12-02Document shm_open.Ondřej Bílka
2013-10-25Document that mmap() returns MAP_FAILED on error, as per the POSIX standard.Fabrice Bauzac
2013-04-12BZ#15361: Make aio_fsync not check open modes.Roland McGrath
2013-02-11Fix some errors in declarations in the manual.Roland McGrath
2012-04-08Better describe open argumentsStephen Compall
[BZ #6649] * manual/llio.texi (Opening and Closing Files): Add cross reference to explain mode argument.
2012-04-06Fix typo in manualRobert Millan
lseek refers to WHENCE when it really means OFFSET
2012-03-14BZ#13846: manual/llio.texi (Memory-mapped I/O): Fix wrong function name.Roland McGrath
2012-03-08Clean up glibc manual references to "GNU system" (bug 6911).Joseph Myers
2012-03-02Document properties of standard typedefs, not exact types.Joseph Myers
2012-02-28Use Texinfo macros to refer to the GNU C Library within the manual.Joseph Myers
2012-02-27Don't document fclean.Joseph Myers
2012-02-17Fix various problems with @deftypefun lines.Nicolas Boulenguez
2006-02-22[BZ #2161]Roland McGrath
2005-11-15 Robert Millan <robertmh@gnu.org> [BZ #2161] * manual/llio.texi (read, write): Document EINVAL on unaligned access.
2005-09-26[BZ #162]Ulrich Drepper
2005-09-26 Ulrich Drepper <drepper@redhat.com> [BZ #162] * manual/llio.texi (Waiting for I/O): Correct description of read conditions reported by select.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper
2007-07-122.5-18.1Jakub Jelinek
2003-05-10Update.Ulrich Drepper
2003-05-09 Thorsten Kukuk <kukuk@suse.de> * sysdeps/unix/sysv/linux/netinet/igmp.h: Don't include kernel headers, add defines from kernel header, move it from here... * inet/netinet/igmp.h: ... to here. * inet/Makefile (headers): Add netinet/igmp.h. * sysdeps/unix/sysv/linux/Makefile: Remove netinet/igmp.h. * sysdeps/unix/sysv/linux/Dist: Remove netinet/igmp.h. 2003-05-10 Ulrich Drepper <drepper@redhat.com> * sysdeps/pthread/lio_listio64.c (lio_listio64): If SIG == NULL, use dummy sigevent structure with SIGEV_NONE [PR libc/5015]. 2003-05-09 Thorsten Kukuk <kukuk@suse.de> * libio/bits/stdio.h: Sync prototypes with libio/stdio.h (remove __THROW from possible cancellation points).
2002-11-04Update.Ulrich Drepper
2002-11-04 Ulrich Drepper <drepper@redhat.com> * manual/examples/dir.c: Don't include <stddef.h>. * manual/examples/select.c: Include <errno.h> for TEMP_FAILURE_RETRY. Reported by Frédéric Delanoy <delanoy_f@yahoo.com>. 2002-11-02 H.J. Lu <hjl@gnu.org> * stdio-common/reg-printf.c: Include <stddef.h>.
2002-08-262002-08-25 Roland McGrath <roland@redhat.com>Roland McGrath
* manual/llio.texi (Access Modes): Fix typos in O_READ/O_WRITE defns.
2002-01-29Update.Ulrich Drepper
2002-01-23 Richard Henderson <rth@redhat.com> * sysdeps/alpha/Makefile (pic-ccflag): New variable. 2002-01-28 Ulrich Drepper <drepper@redhat.com> * string/strxfrm.c: Allocate one more byte for rulearr and clear this element [PR libc/2855]. * string/strcoll.c: Handle zero-length arguments specially [PR libc/2856]. 2002-01-23 Jakub Jelinek <jakub@redhat.com> * string/bits/string2.h (__mempcpy): For gcc 3.0+, don't use __mempcpy_small but instead use __builtin_memcpy ( , , n) + n for short lengths and constant src. (strcpy): Don't optimize for gcc 3.0+. (__stpcpy): For gcc 3.0+, don't use __stpcpy_small but instead use __builtin_strcpy (, src) + strlen (src) for short string literal src. 2002-01-23 Jeroen Dobbelaere <jeroen.dobbelaere@acunia.com> * sysdeps/unix/sysv/linux/configure.in (libc_cv_gcc_unwind_find_fde): Set for arm, too. 2001-01-22 Paul Eggert <eggert@twinsun.com> * manual/llio.texi (Linked Channels, Cleaning Streams): Make it clearer that a just-opened input stream might need cleaning. 2002-01-21 H.J. Lu <hjl@gnu.org> * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Don't use label at end of compound statement.
2001-12-19Update.Ulrich Drepper
2001-12-19 Jakub Jelinek <jakub@redhat.com> * manual/llio.texi (aio_fsync): Fix a typo. Patch by Tammy Fox <tfox@redhat.com>.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 10:02:20 +0000