aboutsummaryrefslogtreecommitdiff
path: root/malloc
AgeCommit message (Collapse)Author
2015-06-05Avoid outputting to TTY after an expected memory corruption in testcaseTulio Magno Quites Machado Filho
Protect TTY against an expected memory corruption from testcase tst-malloc-backtrace, which is expected to SIGABRT after a forced memory corruption.
2015-05-19Fix for test "malloc_usable_size: expected 7 but got 11"James Lemke
[BZ #17581] The checking chain of unused chunks was terminated by a hash of the block pointer, which was sometimes confused with the chunk length byte. We now avoid using a length byte equal to the magic byte.
2015-05-19Avoid deadlock in malloc on backtrace (BZ #16159)Siddhesh Poyarekar
When the malloc subsystem detects some kind of memory corruption, depending on the configuration it prints the error, a backtrace, a memory map and then aborts the process. In this process, the backtrace() call may result in a call to malloc, resulting in various kinds of problematic behavior. In one case, the malloc it calls may detect a corruption and call backtrace again, and a stack overflow may result due to the infinite recursion. In another case, the malloc it calls may deadlock on an arena lock with the malloc (or free, realloc, etc.) that detected the corruption. In yet another case, if the program is linked with pthreads, backtrace may do a pthread_once initialization, which deadlocks on itself. In all these cases, the program exit is not as intended. This is avoidable by marking the arena that malloc detected a corruption on, as unusable. The following patch does that. Features of this patch are as follows: - A flag is added to the mstate struct of the arena to indicate if the arena is corrupt. - The flag is checked whenever malloc functions try to get a lock on an arena. If the arena is unusable, a NULL is returned, causing the malloc to use mmap or try the next arena. - malloc_printerr sets the corrupt flag on the arena when it detects a corruption - free does not concern itself with the flag at all. It is not important since the backtrace workflow does not need free. A free in a parallel thread may cause another corruption, but that's not new - The flag check and set are not atomic and may race. This is fine since we don't care about contention during the flag check. We want to make sure that the malloc call in the backtrace does not trip on itself and all that action happens in the same thread and not across threads. I verified that the test case does not show any regressions due to this patch. I also ran the malloc benchmarks and found an insignificant difference in timings (< 2%). * malloc/Makefile (tests): New test case tst-malloc-backtrace. * malloc/arena.c (arena_lock): Check if arena is corrupt. (reused_arena): Find a non-corrupt arena. (heap_trim): Pass arena to unlink. * malloc/hooks.c (malloc_check_get_size): Pass arena to malloc_printerr. (top_check): Likewise. (free_check): Likewise. (realloc_check): Likewise. * malloc/malloc.c (malloc_printerr): Add arena argument. (unlink): Likewise. (munmap_chunk): Adjust. (ARENA_CORRUPTION_BIT): New macro. (arena_is_corrupt): Likewise. (set_arena_corrupt): Likewise. (sysmalloc): Use mmap if there are no usable arenas. (_int_malloc): Likewise. (__libc_malloc): Don't fail if arena_get returns NULL. (_mid_memalign): Likewise. (__libc_calloc): Likewise. (__libc_realloc): Adjust for additional argument to malloc_printerr. (_int_free): Likewise. (malloc_consolidate): Likewise. (_int_realloc): Likewise. (_int_memalign): Don't touch corrupt arenas. * malloc/tst-malloc-backtrace.c: New test case.
2015-04-09scratch_buffer: Suppress truncation warning on 32-bitFlorian Weimer
2015-04-07scratch_buffer_grow_preserve: Add missing #include <string.h>Florian Weimer
2015-04-07Add struct scratch_buffer and its internal helper functionsFlorian Weimer
These will be used from NSS modules, so they have to be exported.
2015-04-02malloc: Consistently apply trim_threshold to all heaps [BZ #17195]Mel Gorman
Trimming heaps is a balance between saving memory and the system overhead required to update page tables and discard allocated pages. The malloc option M_TRIM_THRESHOLD is a tunable that users are meant to use to decide where this balance point is but it is only applied to the main arena. For scalability reasons, glibc malloc has per-thread heaps but these are shrunk with madvise() if there is one page free at the top of the heap. In some circumstances this can lead to high system overhead if a thread has a control flow like while (data_to_process) { buf = malloc(large_size); do_stuff(); free(buf); } For a large size, the free() will call madvise (pagetable teardown, page free and TLB flush) every time followed immediately by a malloc (fault, kernel page alloc, zeroing and charge accounting). The kernel overhead can dominate such a workload. This patch allows the user to tune when madvise gets called by applying the trim threshold to the per-thread heaps and using similar logic to the main arena when deciding whether to shrink. Alternatively if the dynamic brk/mmap threshold gets adjusted then the new values will be obeyed by the per-thread heaps. Bug 17195 was a test case motivated by a problem encountered in scientific applications written in python that performance badly due to high page fault overhead. The basic operation of such a program was posted by Julian Taylor https://sourceware.org/ml/libc-alpha/2015-02/msg00373.html With this patch applied, the overhead is eliminated. All numbers in this report are in seconds and were recorded by running Julian's program 30 times. pyarray glibc madvise 2.21 v2 System min 1.81 ( 0.00%) 0.00 (100.00%) System mean 1.93 ( 0.00%) 0.02 ( 99.20%) System stddev 0.06 ( 0.00%) 0.01 ( 88.99%) System max 2.06 ( 0.00%) 0.03 ( 98.54%) Elapsed min 3.26 ( 0.00%) 2.37 ( 27.30%) Elapsed mean 3.39 ( 0.00%) 2.41 ( 28.84%) Elapsed stddev 0.14 ( 0.00%) 0.02 ( 82.73%) Elapsed max 4.05 ( 0.00%) 2.47 ( 39.01%) glibc madvise 2.21 v2 User 141.86 142.28 System 57.94 0.60 Elapsed 102.02 72.66 Note that almost a minutes worth of system time is eliminted and the program completes 28% faster on average. To illustrate the problem without python this is a basic test-case for the worst case scenario where every free is a madvise followed by a an alloc /* gcc bench-free.c -lpthread -o bench-free */ static int num = 1024; void __attribute__((noinline,noclone)) dostuff (void *p) { } void *worker (void *data) { int i; for (i = num; i--;) { void *m = malloc (48*4096); dostuff (m); free (m); } return NULL; } int main() { int i; pthread_t t; void *ret; if (pthread_create (&t, NULL, worker, NULL)) exit (2); if (pthread_join (t, &ret)) exit (3); return 0; } Before the patch, this resulted in 1024 calls to madvise. With the patch applied, madvise is called twice because the default trim threshold is high enough to avoid this. This a more complex case where there is a mix of frees. It's simply a different worker function for the test case above void *worker (void *data) { int i; int j = 0; void *free_index[num]; for (i = num; i--;) { void *m = malloc ((i % 58) *4096); dostuff (m); if (i % 2 == 0) { free (m); } else { free_index[j++] = m; } } for (; j >= 0; j--) { free(free_index[j]); } return NULL; } glibc 2.21 calls malloc 90305 times but with the patch applied, it's called 13438. Increasing the trim threshold will decrease the number of times it's called with the option of eliminating the overhead. ebizzy is meant to generate a workload resembling common web application server workloads. It is threaded with a large working set that at its core has an allocation, do_stuff, free loop that also hits this case. The primary metric of the benchmark is records processed per second. This is running on my desktop which is a single socket machine with an I7-4770 and 8 cores. Each thread count was run for 30 seconds. It was only run once as the performance difference is so high that the variation is insignificant. glibc 2.21 patch threads 1 10230 44114 threads 2 19153 84925 threads 4 34295 134569 threads 8 51007 183387 Note that the saving happens to be a concidence as the size allocated by ebizzy was less than the default threshold. If a different number of chunks were specified then it may also be necessary to tune the threshold to compensate This is roughly quadrupling the performance of this benchmark. The difference in system CPU usage illustrates why. ebizzy running 1 thread with glibc 2.21 10230 records/s 306904 real 30.00 s user 7.47 s sys 22.49 s 22.49 seconds was spent in the kernel for a workload runinng 30 seconds. With the patch applied ebizzy running 1 thread with patch applied 44126 records/s 1323792 real 30.00 s user 29.97 s sys 0.00 s system CPU usage was zero with the patch applied. strace shows that glibc running this workload calls madvise approximately 9000 times a second. With the patch applied madvise was called twice during the workload (or 0.06 times per second). 2015-02-10 Mel Gorman <mgorman@suse.de> [BZ #17195] * malloc/arena.c (free): Apply trim threshold to per-thread heaps as well as the main arena.
2015-02-18Consolidate arena_lookup and arena_lock into a single arena_getSiddhesh Poyarekar
This seems to have been left behind as an artifact of some old changes and can now be merged. Verified that the only generated code change on x86_64 is that of line numbers in asserts, like so: @@ -27253,7 +27253,7 @@ Disassembly of section .text: 416f09: 48 89 42 20 mov %rax,0x20(%rdx) 416f0d: e9 7e f6 ff ff jmpq 416590 <_int_free+0x230> 416f12: b9 3f 9f 4a 00 mov $0x4a9f3f,%ecx - 416f17: ba d5 0f 00 00 mov $0xfd5,%edx + 416f17: ba d6 0f 00 00 mov $0xfd6,%edx 416f1c: be a8 9b 4a 00 mov $0x4a9ba8,%esi 416f21: bf 6a 9c 4a 00 mov $0x4a9c6a,%edi 416f26: e8 45 e8 ff ff callq 415770 <__malloc_assert>
2015-02-17Use alignment macros, pagesize and powerof2.Carlos O'Donell
We are replacing all of the bespoke alignment code with ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN. This cleans up malloc/malloc.c, malloc/arena.c, and elf/dl-reloc.c. It also makes all the code consistently use pagesize, and powerof2 as required. Code size is reduced with the removal of precomputed pagemask, and use of pagesize instead. No measurable difference in performance. No regressions on x86_64.
2015-01-02Update copyright dates not handled by scripts/update-copyrights.Joseph Myers
I've updated copyright dates in glibc for 2015. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Apart from the files updated last time (of which sotruss.ksh had moved to sotruss.sh during the year) this also updates nptl/version.c (missed from 2006 until October) and sysdeps/unix/sysv/linux/lddlibc4.c (missed since 2009). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers
2014-12-17Remove explicit inline on malloc perturb functions.Roland McGrath
2014-12-11Fix for test "malloc_usable_size: expected 7 but got 11"James Lemke
[BZ #17581] Revert this fix while investigating a problem.
2014-12-112014-12-11 Steve Ellcey <sellcey@imgtec.com>Steve Ellcey
* malloc/malloc.c: Fix powerof2 check.
2014-12-01Fix for test "malloc_usable_size: expected 7 but got 11"James Lemke
[BZ #17581] The checking chain of unused chunks was terminated by a hash of the block pointer, which was sometimes confused with the chunk length byte. The chain is now terminated by a NULL byte.
2014-11-24Remove NOT_IN_libcSiddhesh Poyarekar
Replace with !IS_IN (libc). This completes the transition from the IS_IN/NOT_IN macros to the IN_MODULE macro set. The generated code is unchanged on x86_64. * stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE. (get_null_defines): Adjust. * sunrpc/Makefile: Adjust comment. * Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc. * elf/Makefile (CPPFLAGS-sotruss-lib): Likewise. (CFLAGS-interp.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CPPFLAGS-.os): Likewise. * elf/rtld-Rules (rtld-CPPFLAGS): Likewise. * extra-lib.mk (CPPFLAGS-$(lib)): Likewise. * extra-modules.mk (extra-modules.mk): Likewise. * iconv/Makefile (CPPFLAGS-iconvprogs): Likewise. * locale/Makefile (CPPFLAGS-locale_programs): Likewise. * malloc/Makefile (CPPFLAGS-memusagestat): Likewise. * nscd/Makefile (CPPFLAGS-nscd): Likewise. * nss/Makefile (CPPFLAGS-nss_test1): Likewise. * stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise. * sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise. * iconvdata/Makefile (CPPFLAGS): Likewise. (cpp-srcs-left): Add libof for all iconvdata routines. * bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN. * include/assert.h: Likewise. * include/ctype.h: Likewise. * include/errno.h: Likewise. * include/libc-symbols.h: Likewise. * include/math.h: Likewise. * include/netdb.h: Likewise. * include/resolv.h: Likewise. * include/stdio.h: Likewise. * include/stdlib.h: Likewise. * include/string.h: Likewise. * include/sys/stat.h: Likewise. * include/wctype.h: Likewise. * intl/l10nflist.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * nptl/libc_multiple_threads.c: Likewise. * nptl/pthreadP.h: Likewise. * posix/regex_internal.h: Likewise. * resolv/res_hconf.c: Likewise. * sysdeps/arm/armv7/multiarch/memcpy.S: Likewise. * sysdeps/arm/memmove.S: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/generic/_itoa.h: Likewise. * sysdeps/generic/symbol-hacks.h: Likewise. * sysdeps/gnu/errlist.awk: Likewise. * sysdeps/gnu/errlist.c: Likewise. * sysdeps/i386/i586/memcpy.S: Likewise. * sysdeps/i386/i586/memset.S: Likewise. * sysdeps/i386/i686/memcpy.S: Likewise. * sysdeps/i386/i686/memmove.S: Likewise. * sysdeps/i386/i686/mempcpy.S: Likewise. * sysdeps/i386/i686/memset.S: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise. * sysdeps/ia64/fpu/libm-symbols.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/nptl/bits/stdio-lock.h: Likewise. * sysdeps/posix/closedir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/posix/readdir.c: Likewise. * sysdeps/posix/rewinddir.c: Likewise. * sysdeps/powerpc/novmx-sigjmp.c: Likewise. * sysdeps/powerpc/powerpc32/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc32/setjmp.S: Likewise. * sysdeps/powerpc/powerpc64/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc64/setjmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-32/multiarch/memset.S: Likewise. * sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-64/multiarch/memset.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset.S: Likewise. * sysdeps/unix/alpha/sysdep.S: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/make-syscalls.sh: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/getpid.c: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise. * sysdeps/wordsize-32/symbol-hacks.h: Likewise. * sysdeps/x86_64/memcpy.S: Likewise. * sysdeps/x86_64/memmove.c: Likewise. * sysdeps/x86_64/memset.S: Likewise. * sysdeps/x86_64/multiarch/init-arch.h: Likewise. * sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise. * sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcpy.S: Likewise. * sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/mempcpy.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset.S: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise. * sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcat.S: Likewise. * sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise. * sysdeps/x86_64/multiarch/strchr.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.S: Likewise. * sysdeps/x86_64/multiarch/strcspn.S: Likewise. * sysdeps/x86_64/multiarch/strspn.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise. * sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy.S: Likewise. * sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.S: Likewise. * sysdeps/x86_64/strcmp.S: Likewise.
2014-11-19Add new macro IN_MODULE to identify module in which source is builtSiddhesh Poyarekar
The current scheme to identify which module a translation unit is built in depends on defining multiple macros IS_IN_* and also defining NOT_IN_libc if we're building a non-libc module. In addition, there is an IN_LIB macro that does effectively the same thing, but for different modules (notably the systemtap probes). This macro scheme unifies both ideas to use just one macro IN_MODULE and assign it a value depending on the module it is being built into. If the module is not defined, it defaults to MODULE_libc. Patches that follow will replace uses of IS_IN_* variables with the IS_IN() macro. libc-symbols.h has been converted already to give an example of how such a transition will look. Verified that there are no relevant binary changes. One source change that will crop up repeatedly is that of nscd_stat, since it uses the build timestamp as a constant in its logic. * Makeconfig (in-module): Get value of libof set for the translation unit. (CPPFLAGS): Use $(in-module). * Makerules: Don't suffix routine names for nonlib. * include/libc-modules.h: New file. * include/libc-symbols.h: Include libc-modules.h (IS_IN): New macro to replace IS_IN_* macros. * elf/Makefile: Set libof-* for each routine. * elf/rtld-Rules: Likewise. * extra-modules.mk: Likewise. * iconv/Makefile: Likewise. * iconvdata/Makefile: Likewise. * locale/Makefile: Likewise. * malloc/Makefile: Likewise. * nss/Makefile: Likewise. * sysdeps/gnu/Makefile: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile: Likewise. * sysdeps/unix/sysv/linux/Makefile: Likewise. * sysdeps/s390/s390-64/Makefile: Likewise. * nscd/Makefile: Set libof-* for each routine. Set CFLAGS and CPPFLAGS for nscd instead of nonlib.
2014-11-12Fix malloc_info namespace (bug 17570).Joseph Myers
malloc_info is defined in the same file as malloc and free, but is not an ISO C function, so should be a weak symbol. This patch makes it so. Tested for x86_64 (testsuite, and that disassembly of installed shared libraries is unchanged by the patch). [BZ #17570] * malloc/malloc.c (malloc_info): Rename to __malloc_info and define as weak alias of __malloc_info.
2014-11-05Modify several tests to use test-skeleton.cArjun Shankar
This patch modifies several test cases to use test-skeleton.c. It was generated by a bash script written for this purpose and thus excludes several other tests which I deemed worth a visual inspection before making the change. I intend to follow up with individual patches to the tests skipped by the script. The script itself resides at http://git.io/WODAmg and should reproduce this very patch when run against master. ChangeLog: 2014-10-30 Arjun Shankar <arjun.is@lostca.se> * catgets/test-gencat.c: Use test-skeleton.c. * catgets/tst-catgets.c: Likewise. * csu/tst-empty.c: Likewise. * elf/tst-audit2.c: Likewise. * elf/tst-global1.c: Likewise. * elf/tst-pathopt.c: Likewise. * elf/tst-piemod1.c: Likewise. * elf/tst-tls10.c: Likewise. * elf/tst-tls11.c: Likewise. * elf/tst-tls12.c: Likewise. * gnulib/tst-gcc.c: Likewise. * iconvdata/tst-e2big.c: Likewise. * iconvdata/tst-loading.c: Likewise. * iconv/tst-iconv1.c: Likewise. * iconv/tst-iconv2.c: Likewise. * inet/test-inet6_opt.c: Likewise. * inet/tst-gethnm.c: Likewise. * inet/tst-network.c: Likewise. * inet/tst-ntoa.c: Likewise. * intl/tst-codeset.c: Likewise. * intl/tst-gettext2.c: Likewise. * intl/tst-gettext3.c: Likewise. * intl/tst-ngettext.c: Likewise. * intl/tst-translit.c: Likewise. * io/test-stat.c: Likewise. * libio/test-fmemopen.c: Likewise. * libio/tst-freopen.c: Likewise. * libio/tst-sscanf.c: Likewise. * libio/tst-ungetwc1.c: Likewise. * libio/tst-ungetwc2.c: Likewise. * libio/tst-widetext.c: Likewise. * localedata/tst-ctype.c: Likewise. * localedata/tst-digits.c: Likewise. * localedata/tst-leaks.c: Likewise. * localedata/tst-mbswcs1.c: Likewise. * localedata/tst-mbswcs2.c: Likewise. * localedata/tst-mbswcs3.c: Likewise. * localedata/tst-mbswcs4.c: Likewise. * localedata/tst-mbswcs5.c: Likewise. * localedata/tst-setlocale.c: Likewise. * localedata/tst-trans.c: Likewise. * localedata/tst-wctype.c: Likewise. * localedata/tst-xlocale1.c: Likewise. * login/tst-grantpt.c: Likewise. * malloc/tst-calloc.c: Likewise. * malloc/tst-malloc.c: Likewise. * malloc/tst-mallocstate.c: Likewise. * malloc/tst-mcheck.c: Likewise. * malloc/tst-mtrace.c: Likewise. * malloc/tst-obstack.c: Likewise. * math/atest-exp2.c: Likewise. * math/atest-exp.c: Likewise. * math/atest-sincos.c: Likewise. * math/test-matherr.c: Likewise. * math/test-misc.c: Likewise. * math/test-powl.c: Likewise. * math/tst-definitions.c: Likewise. * misc/tst-dirname.c: Likewise. * misc/tst-efgcvt.c: Likewise. * misc/tst-fdset.c: Likewise. * misc/tst-hsearch.c: Likewise. * misc/tst-mntent2.c: Likewise. * nptl/tst-sem7.c: Likewise. * nptl/tst-sem8.c: Likewise. * nptl/tst-sem9.c: Likewise. * nss/test-netdb.c: Likewise. * posix/tst-fnmatch.c: Likewise. * posix/tst-getlogin.c: Likewise. * posix/tst-gnuglob.c: Likewise. * posix/tst-mmap.c: Likewise. * pwd/tst-getpw.c: Likewise. * resolv/tst-inet_ntop.c: Likewise. * rt/tst-timer.c: Likewise. * stdio-common/test-fseek.c: Likewise. * stdio-common/test-popen.c: Likewise. * stdio-common/test-vfprintf.c: Likewise. * stdio-common/tst-cookie.c: Likewise. * stdio-common/tst-fileno.c: Likewise. * stdio-common/tst-gets.c: Likewise. * stdio-common/tst-obprintf.c: Likewise. * stdio-common/tst-perror.c: Likewise. * stdio-common/tst-sprintf2.c: Likewise. * stdio-common/tst-sprintf3.c: Likewise. * stdio-common/tst-sprintf.c: Likewise. * stdio-common/tst-swprintf.c: Likewise. * stdio-common/tst-tmpnam.c: Likewise. * stdio-common/tst-unbputc.c: Likewise. * stdio-common/tst-wc-printf.c: Likewise. * stdlib/tst-environ.c: Likewise. * stdlib/tst-fmtmsg.c: Likewise. * stdlib/tst-limits.c: Likewise. * stdlib/tst-rand48-2.c: Likewise. * stdlib/tst-rand48.c: Likewise. * stdlib/tst-random2.c: Likewise. * stdlib/tst-random.c: Likewise. * stdlib/tst-strtol.c: Likewise. * stdlib/tst-strtoll.c: Likewise. * stdlib/tst-tls-atexit.c: Likewise. * stdlib/tst-xpg-basename.c: Likewise. * string/test-ffs.c: Likewise. * string/tst-bswap.c: Likewise. * string/tst-inlcall.c: Likewise. * string/tst-strtok.c: Likewise. * string/tst-strxfrm.c: Likewise. * sysdeps/x86_64/tst-audit10.c: Likewise. * sysdeps/x86_64/tst-audit3.c: Likewise. * sysdeps/x86_64/tst-audit4.c: Likewise. * sysdeps/x86_64/tst-audit5.c: Likewise. * time/tst-ftime_l.c: Likewise. * time/tst-getdate.c: Likewise. * time/tst-mktime3.c: Likewise. * time/tst-mktime.c: Likewise. * time/tst-posixtz.c: Likewise. * time/tst-strptime2.c: Likewise. * time/tst-strptime3.c: Likewise. * wcsmbs/tst-btowc.c: Likewise. * wcsmbs/tst-mbrtowc.c: Likewise. * wcsmbs/tst-mbsrtowcs.c: Likewise. * wcsmbs/tst-wchar-h.c: Likewise. * wcsmbs/tst-wcpncpy.c: Likewise. * wcsmbs/tst-wcrtomb.c: Likewise. * wcsmbs/tst-wcsnlen.c: Likewise. * wcsmbs/tst-wcstof.c: Likewise.
2014-09-11malloc: additional unlink hardening for non-small bins [BZ #17344]Florian Weimer
Turn two asserts into a conditional call to malloc_printerr. The memory locations are accessed later anyway, so the performance impact is minor.
2014-08-12malloc: fix comment typoSean Anderson
2014-07-02malloc/obstack: Merge from gnulibWill Newton
Merge the latest version of the obstack.c and obstack.h files from gnulib. The majority of this change is coding style and cosmetic comment changes but it also fixes a -Wundef warning in the build as a side effect. 2014-07-02 Will Newton <will.newton@linaro.org> * malloc/obstack.c: Merge from gnulib master. [HAVE_CONFIG_H]: Remove conditional code. [!_LIBC]: Include config.h. [!ELIDE_CODE]: Don't include inttypes.h, include stdint.h unconditionally. (print_and_abort): Mark as _Noreturn. (_obstack_allocated_p): Mark as __attribute_pure__. (obstack_free): Rename to __obstack_free. [!__attribute__]: Remove conditional code. * malloc/obstack.h: Merge from gnulib master. [__cplusplus]: Move conditional down. [!__attribute_pure__]: Define __attribute_pure__ here if it is not already defined. (_obstack_memory_used): Mark as __attribute_pure__. [!__obstack_free]: Define as obstack_free. [__GNUC__]: Remove check for ancient NeXT gcc.
2014-06-19malloc/malloc.c: Avoid calling sbrk unnecessarily with zeroWill Newton
Due to my bad review suggestion for the fix for BZ #15089 a check was removed from systrim to prevent sbrk being called with a zero argument. Add the check back to avoid this useless work. ChangeLog: 2014-06-19 Will Newton <will.newton@linaro.org> * malloc/malloc.c (systrim): If extra is zero then return early.
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-06-02Fix format specifier for n_mmapsSiddhesh Poyarekar
2014-05-30Fix formatting in malloc_infoSiddhesh Poyarekar
2014-05-30Add mmap usage in malloc_info outputSiddhesh Poyarekar
The current malloc_info xml output only has information about allocations on the heap. Display information about number of mappings and total mmapped size to this to complete the picture.
2014-05-30Remove mi_arena nested function.Ondřej Bílka
2014-05-30revert commit fdfd175d46ac6a810ebdeb2a2936e6d7d13995abOndřej Bílka
2014-05-26Remove nested function mi_arena from malloc_info.Carlos O'Donell
The nested function mi_arena was removed from malloc_info and made into a non-nested static inline function of the same name with the correct set of arguments passed from malloc_info. This enables building glibc with compilers that don't support nested functions. Future work on malloc_info should remove these functions entirely to support JSON format output. Therefore we do the minimum required to remove the nested function.
2014-05-16Use existing makefile variables for dependencies on glibc libraries.Joseph Myers
glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
2014-05-12malloc: Add mallopt test.Will Newton
ChangeLog: 2014-05-12 Will Newton <will.newton@linaro.org> * malloc/Makefile (tests): Add tst-mallopt. * malloc/tst-mallopt.c: New file.
2014-04-11malloc: Fix MALLOC_DEBUG -Wundef warningWill Newton
MALLOC_DEBUG is set optionally on the command line. Default the value to zero if it is not set on the command line, and test its value with #if rather than #ifdef. Verified the code is identical before and after this change apart from line numbers. ChangeLog: 2014-04-11 Will Newton <will.newton@linaro.org> * malloc/malloc.c [!MALLOC_DEBUG]: #define MALLOC_DEBUG to zero if it is not defined elsewhere. (mtrim): Test the value of MALLOC_DEBUG with #if rather than #ifdef.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-03Revert 4248f0da6ff9e7dd63464cdecec2dec332dfc2f0.Carlos O'Donell
Objections were raised surrounding the calloc simplification and it is better to revert the patch, continue discussions and then submit a new patch for inclusion with all issues fully addressed.
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26Simplify calloc implementation.Ondřej Bílka
To make future improvements of allocator simpler we could for now calloc just call malloc and memset. With that we could omit a changes that would duplicate malloc changes anyway.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-11malloc/mtrace.c: Cosmetic cleanup.Will Newton
Remove an unused #define and use ANSI prototypes. Generated code identical on x86_64-unknown-linux-gnu. ChangeLog: 2014-02-11 Will Newton <will.newton@linaro.org> * malloc/mtrace.c (attribute_hidden): Remove unused macro definition. (tr_where, tr_freehook, tr_mallochook, tr_reallochook, tr_memalignhook): Use ANSI protoype.
2014-02-10Use glibc_likely instead __builtin_expect.Ondřej Bílka
2014-02-10Remove THREAD_STATS.Ondřej Bílka
A THREAD_STATS macro duplicates gathering information that could be obtained by systemtap probes instead.
2014-01-05Fix gettext call formattingAllan McRae
2014-01-02Reformat malloc to gnu style.Ondřej Bílka
2014-01-01Update remaining copyright datesAllan McRae
Update copyright years that are not handled by scripts/update-copyright.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-12-24Fix race in free() of fastbin chunk: BZ #15073Maxim Kuvyrkov
Perform sanity check only if we have_lock. Due to lockless nature of fastbins we need to be careful derefencing pointers to fastbin entries (chunksize(old) in this case) in multithreaded environments. The fix is to add have_lock to the if-condition checks. The rest of the patch only makes code more readable. * malloc/malloc.c (_int_free): Perform sanity check only if we have_lock.
2013-12-10Expand MALLOC_COPY and MALLOC_ZERO to memcpy and memset.Ondřej Bílka
2013-12-10Drop PER_THREAD conditionals from malloc.Ondřej Bílka
2013-12-09Simplify perturb_byte logic.Ondřej Bílka