aboutsummaryrefslogtreecommitdiff
path: root/libio/Makefile
AgeCommit message (Collapse)Author
2017-08-07Fix missing redirects in testsuite targetsAndreas Schwab
2017-06-08Remove __need macros from stdio.h and wchar.h.Zack Weinberg
wint_t is a little finicky because it might be defined by stddef.h, which belongs to the compiler. In addition to the _types_, a bunch of other declarations shared between wctype.h and wchar.h are factored out to their own header. * libio/bits/types/FILE.h, libio/bits/types/__FILE.h * wcsmbs/bits/types/mbstate_t.h, wcsmbs/bits/types/__mbstate_t.h * wcsmbs/bits/types/wint_t.h: New single-type definition files. * wctype/bits/wctype-wchar.h: New file holding declarations shared between wctype.h and wchar.h. * libio/Makefile, wcsmbs/Makefile, wctype/Makefile: Install them. * include/bits/types/FILE.h, include/bits/types/__FILE.h * include/bits/types/mbstate_t.h, include/bits/types/__mbstate_t.h * include/bits/types/wint_t.h, include/bits/wcsmbs-wchar.h: New wrappers. * include/stdio.h, include/wchar.h, include/wctype.h: No need to handle __need macros. * grp/grp.h, gshadow/gshadow.h, hurd/hurd.h, iconv/gconv.h * libio/stdio.h, mach/mach.h, misc/mntent.h, pwd/pwd.h * shadow/shadow.h, stdio-common/printf.h, wcsmbs/uchar.h * wcsmbs/wchar.h, wctype/wctype.h * sysdeps/generic/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h Use the new files instead of __need macros.
2017-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers
2016-09-30libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181)Adhemerval Zanella
This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
2016-06-23libio: Implement vtable verification [BZ #20191]Florian Weimer
This commit puts all libio vtables in a dedicated, read-only ELF section, so that they are consecutive in memory. Before any indirect jump, the vtable pointer is checked against the section boundaries, and the process is terminated if the vtable pointer does not fall into the special ELF section. To enable backwards compatibility, a special flag variable (_IO_accept_foreign_vtables), protected by the pointer guard, avoids process termination if libio stream object constructor functions have been called earlier. Such constructor functions are called by the GCC 2.95 libstdc++ library, and this mechanism ensures compatibility with old binaries. Existing callers inside glibc of these functions are adjusted to call the original functions, not the wrappers which enable vtable compatiblity. The compatibility mechanism is used to enable passing FILE * objects across a static dlopen boundary, too.
2016-01-04Update copyright dates with scripts/update-copyrights.Joseph Myers
2015-10-15Remove -fexceptions configure test.Joseph Myers
There is a configure test for -fexceptions. This option was added in GCC 2.8, so the test is obsolete - and indeed plenty of code is using -fexceptions directly. This patch removes the configure test and makes all uses of $(exceptions) use -fexceptions directly. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_exceptions): Remove configure test. * configure: Regenerated. * sysdeps/arm/configure.ac (libc_cv_gcc_exceptions): Do not set variable. (exceptions): Likewise. * sysdeps/arm/configure: Regenerated. * config.make.in (exceptions): Remove variable. * Makeconfig (uses-callbacks): Use -fexceptions instead of $(exceptions). * debug/Makefile (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-fprintf.c): Likewise. (CFLAGS-printf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-vfscanf.c): Likewise. (CFLAGS-vfwscanf.c): Likewise. (CFLAGS-fscanf.c): Likewise. (CFLAGS-scanf.c): Likewise. (CFLAGS-isoc99_vfscanf.c): Likewise. (CFLAGS-isoc99_vscanf.c): Likewise. (CFLAGS-isoc99_fscanf.c): Likewise. (CFLAGS-isoc99_scanf.c): Likewise. * wcsmbs/Makefile (CFLAGS-isoc99_wscanf.c): Likewise. (CFLAGS-isoc99_fwscanf.c): Likewise. (CFLAGS-isoc99_vwscanf.c): Likewise. (CFLAGS-isoc99_vfwscanf.c): Likewise.
2015-10-12Add dependencies on needed locales in each subdir tests (bug 18969)Andreas Schwab
2015-09-03Don't install bits/libc-lock.h or bits/stdio-lock.h.Joseph Myers
The bits/libc-lock.h and bits/stdio-lock.h headers are installed, but not used by any other installed header. Accordingly, this patch stops these headers from being installed. A followup is intended to move these headers out of the bits/ namespace. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * Makefile (headers): Remove bits/libc-lock.h. * libio/Makefile (headers): Remove bits/stdio-lock.h.
2015-08-12Fix BZ #18820 -- fmemopen may leak memory on failure.Paul Pluzhnikov
2015-07-08libio: fmemopen rewrite to POSIX complianceAdhemerval Zanella
This patch added a new fmemopen version, for glibc 2.22, that aims to be POSIX complaint. It fixes some long-stading glibc fmemopen issues, such as: * it changes the way fseek with SEEK_END works on fmemopen to seek relative to buffer size instead of first '\0'. This is default mode and 'b' opening mode does not change internal behavior (bz#6544). * fix apending opening mode to use as start position either first null byte of len specified in function call (bz#13152 and #13151). * remove binary option 'b' and internal different handling (bz#12836) * fix seek/SEE_END with negative values (bz#14292). A compatibility symbol is provided to with old behavior for older symbols version (2.2.5). * include/stdio.h (fmemopen): Remove hidden prototype. (__fmemopen): Add new hidden prototype. * libio/Makefile: Add oldfmemopen object. * libio/Versions [GLIBC_2.22]: Add new fmemopen symbol. * libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX compliance. * libio/oldfmemopen.c: New file: old fmemopen implementation for symbol compatibility. * stdio-common/Makefile [tests]: Add new tst-fmemopen3. * stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of fmemopen. * stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus on append and read mode. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add fmemopen. * sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise.
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers
2014-11-03Don't error out writing a multibyte character to an unbuffered stream (bug ↵Andreas Schwab
17522)
2014-06-07Remove redundant C locale settings.Joseph Myers
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-04Include LOCPATH in default test environment.Joseph Myers
Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
2014-05-27Fix offset computation for append+ mode on switching from read (BZ #16724)Siddhesh Poyarekar
The offset computation in write mode uses the fact that _IO_read_end is kept in sync with the external file offset. This however is not true when O_APPEND is in effect since switching to write mode ought to send the external file offset to the end of file without making the necessary adjustment to _IO_read_end. Hence in append mode, offset computation when writing should only consider the effect of unflushed writes, i.e. from _IO_write_base to _IO_write_ptr. The wiki has a detailed document that describes the rationale for offsets returned by ftell in various conditions: https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
2014-03-25Setup LOCPATH for tst-ftell-active-handler and tst-ftell-partial-wide in libioAndreas Schwab
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-04Separate ftell from fseek logic and avoid modifying FILE data (#16532)Siddhesh Poyarekar
ftell semantics are distinct from fseek(SEEK_CUR) especially when it is called on a file handler that is not yet active. Due to this caveat, much care needs to be taken while modifying the handler data and hence, this first iteration on separating out ftell focusses on maintaining handler data integrity at all times while it figures out the current stream offset. The result is that it makes a syscall for every offset request. There is scope for optimizing this by caching offsets when we know that the handler is active. A simple way to find out is when the buffers have data. It is not so simple to find this out when the buffer is empty without adding some kind of flag.
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-14Split up rules for tests using mtrace and something else.Joseph Myers
Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-05Fix infinite loop in ftell when writing wide char data (BZ #16398)Siddhesh Poyarekar
ftell tries to avoid flushing the buffer when it is in write mode by converting the wide char data and placing it into the binary buffer. If the output buffer space is full and there is data to write, the code reverts to flushing the buffer. This breaks when there is space in the buffer but it is not enough to convert the next character in the wide data buffer, due to which __codecvt_do_out returns a __codecvt_partial status. In this case, ftell keeps running in an infinite loop. The fix here is to detect the __codecvt_partial status in addition to checking if the buffer is full. I have also added a test case that demonstrates the infinite loop.
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-09-04Remove --disable-versioning.Joseph Myers
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers
2012-12-01[BZ #12724] libio: revert partial POSIX 2008 fclose supportMike Frysinger
In BZ #12724, partial support for POSIX 2008 fclose behavior was added. Since it isn't entirely conforming to the spec, some applications are known to be breaking in this intermediate state. So revert the partial support until we can get things fully implemented. This reverts commit fcabc0f8b185f9e0a9289720be5ede6c39b3bf21. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-11-28Make fwrite return 0 on EOFSiddhesh Poyarekar
2012-10-24Define and use $(run-built-tests).Joseph Myers
2012-09-28Adjust wide data buffer pointers during fseek and ftellSiddhesh Poyarekar
[BZ #14543] Set the internal buffer state correctly whenever the external buffer state is modified by fseek by either computing the current _IO_read_ptr/end for the internal buffer based on the new _IO_read_ptr in the external buffer or converting the content read into the external buffer, up to the extent of the requested fseek offset.
2012-09-25Set "fail on error" mode directly in testsuite shell scriptsDmitry V. Levin
2012-09-10Run tst-fopenloc if $(build-shared) is yesH.J. Lu
2012-08-17Clean up definition of _LIBC_REENTRANT and _IO_MTSAFE_IO.Roland McGrath
2012-03-07Remove distribute variable from MakefilesUlrich Drepper
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert
2011-05-13Fix file descriptor position after fcloseUlrich Drepper
fclose should leave the file descriptor position after the last read or written byte.
2009-09-02Fix fsetpos on wide stream.Andreas Schwab
2009-06-16Run tst-fgetwc with necessary envvar.Ulrich Drepper
2009-02-042009-02-04 Ulrich Drepper <drepper@redhat.com>cvs/fedora-glibc-20090204T2135Ulrich Drepper
* libio/wfileops.c (_IO_wfile_underflow): Fix handling of incomplete characters at end of input buffer. * libio/Makefile (tests): Add tst-fgetwc. * libio/tst-fgetwc.c: New file. * libio/tst-fgetwc.input: New file.
2008-07-27* sysdeps/unix/sysv/linux/syscalls.list: Add __pipe2 alias.Ulrich Drepper
* io/pipe2.c: Likewise. * sysdeps/unix/sysv/linux/kernel-features.h: Define __ASSUME_PIPE2 instead of __ASSUME_PACCEPT. * include/unistd.h: Declare __have_pipe2. * libio/iopopen.c: Implement "e" flag. * libio/Makefile (tests): Add tst-popen1. * libio/tst-popen1.c: New file.
2007-10-13* libio/Makefile (tests): Add tst-ext2.Ulrich Drepper
* libio/tst-ext2.c: New file.
2006-12-13[BZ #2337]Ulrich Drepper
2006-12-13 Ulrich Drepper <drepper@redhat.com> [BZ #2337] * libio/Makefile (tests): Add tst-setvbuf1. * libio/tst-setvbuf1.c: New file. 2006-12-08 Jakub Jelinek <jakub@redhat.com> [BZ #2337] * libio/genops.c (__uflow): Fix a typo. * libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat nor set _IO_LINE_BUF bit here. Size the wide buffer based on the narrow buffer size. 2006-11-24 Jakub Jelinek <jakub@redhat.com> [BZ #2337] * libio/libio.h (_IO_FLAGS2_USER_WBUF): Define. * libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set _IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit in _flags. * libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf, _IO_wstr_finish): Likewise. * libio/wmemstream.c (open_wmemstream): Likewise. * libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp] even for wide streams.
2006-08-14[BZ #1996]Ulrich Drepper
2006-08-14 Ulrich Drepper <drepper@redhat.com> [BZ #1996] * libio/memstream.c (open_memstream): Allocate initial buffer with calloc. * libio/wmemstream.c (open_wmemstream): Likewise. * libio/strops.c: Pretty printing. (_IO_str_overflow): Clear uninitialized part of the new buffer. (enlarge_userbuf): New function. (_IO_str_seekoff): Call it if seek position is larger than current buffer. * libio/wstrops.c: Likewise. * libio/vasprintf.c: Add comment as to why we do not have to use calloc instead of malloc to allocate initial buffer. * libio/Makefile (tests): Add bug-memstream1 and bug-wmemstream1. * libio/bug-memstream1.c: New file. * libio/bug-wmemstream1.c: New file.
2006-01-19[BZ #2173]Ulrich Drepper
2006-01-18 Ulrich Drepper <drepper@redhat.com> [BZ #2173] * libio/fileops.c (_IO_new_file_fopen): If ,ccs= is given, also set vtable to the wide vtable. * libio/tst-fopenloc2.c: New file. * libio/Makefile (tests): Add tst-fopenloc2. * sysdeps/unix/sysv/linux/shm_open.c [__ASSUME_TMPFS_NAME]
2006-01-16* libio/stdio.h: Declare open_wmemstream.Ulrich Drepper
* libio/Versions: Export open_wmemstream for GLIBC_2.4.
2006-01-14* math/math.h [__NO_LONG_DOUBLE_MATH] (__nldbl_nexttowardf): NewRoland McGrath
prototype. (nexttowardf): Redirect to __nldbl_nexttowardf. (nexttoward): Redirect to nextafter. (__MATHDECL_2, __MATHDECL_1): Redirect *l functions to non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and __NO_LONG_DOUBLE_MATH. * math/complex.h (__MATHDECL_1): Likewise. * math/bits/mathcalls.h (nexttoward): Don't prototype if __LDBL_COMPAT. * misc/sys/cdefs.h: Include <bits/wordsize.h>. (__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH, __LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros. * libio/bits/stdio-ldbl.h: New file. * libio/Makefile (headers): Add it. * libio/stdio.h [__LDBL_COMPAT]: #include it. * libio/bits/libio-ldbl.h: New file. * libio/Makefile (headers): Add it. * libio/libio.h [__LDBL_COMPAT]: #include it. * libio/libioP.h: Include <math_ldbl_opt.h>. * include/wchar.h (__fwprintf, __vfwprintf): Fix commented out attribute. (__vfwprintf_chk): New prototype. Add libc_hidden_proto. * wcsmbs/bits/wchar-ldbl.h: New file. * wcsmbs/Makefile (headers): Add it. * wcsmbs/wchar.h [__LDBL_COMPAT]: #include it. * wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed. (vswprintf): Define as a macro rather than inline function. * stdio-common/bits/printf-ldbl.h: New file. * stdio-common/Makefile (headers): Add it. * stdio-common/printf.h [__LDBL_COMPAT]: #include it. * libio/fwprintf.c: Include libioP.h. (fwprintf): Use ldbl_weak_alias instead of weak_alias. * libio/fwscanf.c: Include libioP.h. (fwscanf): Rename to __fwscanf and add ldbl_strong_alias. * libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of weak_alias. * libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf, add ldbl_strong_alias and use INTDEF2 instead of INTDEF. (vsprintf): Use ldbl_weak_alias instead of weak_alias. * libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias instead of weak_alias. * libio/iovswscanf.c (vswscanf): Rename to __vswscanf, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * libio/obprintf.c (obstack_printf, obstack_vprintf): Use ldbl_weak_alias instead of weak_alias. * libio/swprintf.c: Include libioP.h. (swprintf): Rename to __swprintf and add ldbl_strong_alias. * libio/swscanf.c: Include libioP.h. (swscanf): Rename to __swscanf and add ldbl_strong_alias. * libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of weak_alias. * libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of weak_alias. * libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias instead of weak_alias. * libio/vswprintf.c (__vswprintf): Remove alias. (vswprintf): Use ldbl_weak_alias instead of weak_alias. * libio/vwprintf.c: Include libioP.h. (vwprintf): Rename to __vwprintf and add ldbl_strong_alias. * libio/vwscanf.c (vwscanf): Rename to __vwscanf and add ldbl_strong_alias. * libio/wprintf.c: Include libioP.h. (wprintf): Rename to __wprintf and add ldbl_strong_alias. * libio/wscanf.c: Include libioP.h. (wscanf): Rename to __wscanf and add ldbl_strong_alias. * stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add ldbl_strong_alias and use INTDEF2 instead of INTDEF. (asprintf): Use ldbl_weak_alias instead of weak_alias. * stdio-common/dprintf.c (dprintf): Rename to __dprintf, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * stdio-common/fprintf.c: Include libioP.h. (fprintf): Rename to __fprintf, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. (_IO_fprintf): Use ldbl_weak_alias instead of weak_alias. * stdio-common/fscanf.c: Include libioP.h. (fscanf): Rename to __fscanf and add ldbl_strong_alias. * stdio-common/printf.c: Include libioP.h. (printf): Rename to __printf and add ldbl_strong_alias. (_IO_printf): Use ldbl_strong_alias instead of strong_alias. * stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * stdio-common/printf_size.c (printf_size): Rename to __printf_size and add ldbl_strong_alias. * stdio-common/scanf.c (scanf): Rename to __scanf and add ldbl_strong_alias. * stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of weak_alias. * stdio-common/sprintf.c (sprintf): Rename to __sprintf, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. (_IO_sprintf): Use ldbl_strong_alias instead of strong_alias. * stdio-common/sscanf.c: Include libioP.h instead of iolibio.h. (sscanf): Rename to __sscanf and add ldbl_strong_alias. * stdio-common/vfprintf.c (vfprintf): Define to _IO_vfprintf_internal. Use ldbl_strong_alias instead. Use ldbl_hidden_def instead of libc_hidden_def. (_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl, handle the argument as double if it is non-zero. (vfwprintf): Use ldbl_weak_alias instead of weak_alias. (_IO_vfprintf): Add ldbl_strong_alias. * stdio-common/vfscanf.c (_IO_vfscanf): Rename to _IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add ldbl_strong_alias. (vfwscanf): Use ldbl_weak_alias instead of weak_alias. (__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. (vfscanf): Use ldbl_weak_alias instead of weak_alias. * stdio-common/vprintf.c: Include libioP.h. (vprintf): Rename to __vprintf and add ldbl_strong_alias. * debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk and add ldbl_strong_alias. * debug/printf_chk.c (__printf_chk): Rename to ___printf_chk and add ldbl_strong_alias. * debug/snprintf_chk.c: Include libioP.h. (__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias. * debug/sprintf_chk.c: Include libioP.h. (__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias. * debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def. * debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk and add ldbl_strong_alias. * debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk, add ldbl_strong_alias and use ldbl_hidden_def instead of libc_hidden_def. * stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT]. * wcsmbs/wchar.h (wcstold): Likewise. * stdlib/strtod_l.c: Include math_ldbl_opt.h. (____STRTOF_INTERNAL): Define. (INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL. (__STRTOF): Call ____STRTOF_INTERNAL instead. [LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l): Add compatibility symbols. * stdlib/strtod.c: Include math_ldbl_opt.h. [LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal, __wcstold_internal): Add compatibility symbols. * stdlib/strtold.c: Include bits/wordsize.h, wchar.h. (NEW, NEW1): Define. (__new_strtold, __new_wcstold): New prototypes. (____new_strtold_internal, ____new_wcstold_internal): Likewise. Add libc_hidden_proto. (STRTOF): Define to NEW (*told). [__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add long_double_symbol. [__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal, __strtold_internal): Likewise. Add libc_hidden_ver. * stdlib/bits/stdlib-ldbl.h: New file. * stdlib/Makefile (headers): Add it. * stdlib/stdlib.h [__LDBL_COMPAT]: #include it. * include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove libc_hidden_proto. (__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt, __qgcvt, __qecvt_r, __qfcvt_r): New prototypes. * misc/efgcvt_r.c: Include shlib-compat.h. (LONG_DOUBLE_CVT): Define. (__APPEND, __APPEND2): Define. (*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def. (*ecvt_r): Likewise. (cvt_symbol): Define. Use it on fcvt_r and ecvt_r. * misc/efgcvt.c: Include shlib-compat.h. (LONG_DOUBLE_CVT): Define. (__APPEND, __APPEND2): Define. (fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def. (ecvt, gcvt): Likewise. (cvt_symbol): Define. Use it on fcvt, ecvt and gcvt. * stdlib/bits/monetary-ldbl.h: New file. * stdlib/Makefile (headers): Add it. * stdlib/monetary.h [__LDBL_COMPAT]: #include it. * stdlib/strfmon.c: Include math_ldbl_opt.h. (strfmon): Rename to __strfmon and add ldbl_strong_alias. * stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO]. (__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl. (__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias. (strfmon_l): Use ldbl_weak_alias instead of weak_alias. * misc/bits/syslog-ldbl.h: New file. * misc/Makefile (headers): Add it. * misc/sys/syslog.h [__LDBL_COMPAT]: #include it. * misc/syslog.c: Include math_ldbl_opt.h. (syslog): Rename to __syslog and add ldbl_strong_alias, use ldbl_hidden_def instead of libc_hidden_def. (vsyslog): Rename to __vsyslog and add ldbl_strong_alias, use ldbl_hidden_def instead of libc_hidden_def. * sysdeps/generic/math_ldbl_opt.h: New file. * math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants. Add weak_alias. * math/w_j0l.c (j0l, y0l): Likewise. * math/w_jnl.c (jnl, ynl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttowardl): Remove strong_alias. (nexttowardl): Remove weak_alias. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl, __erfcl): Remove strong_alias. (erfl, erfcl): Remove weak_alias. * sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file. * sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file. * sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file. * sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file. * sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file. * sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file. * sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file. * sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file. * sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file. * sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file. * sysdeps/ieee754/ldbl-64-128/w_expl.c: New file. * sysdeps/ieee754/ldbl-opt/configure.in: New file. * sysdeps/ieee754/ldbl-opt/configure: New file. * sysdeps/ieee754/ldbl-opt/Makefile: New file. * sysdeps/ieee754/ldbl-opt/Versions: New file. * sysdeps/ieee754/ldbl-opt/cabs.c: New file. * sysdeps/ieee754/ldbl-opt/cabsl.c: New file. * sysdeps/ieee754/ldbl-opt/carg.c: New file. * sysdeps/ieee754/ldbl-opt/cargl.c: New file. * sysdeps/ieee754/ldbl-opt/cimag.c: New file. * sysdeps/ieee754/ldbl-opt/cimagl.c: New file. * sysdeps/ieee754/ldbl-opt/conj.c: New file. * sysdeps/ieee754/ldbl-opt/conjl.c: New file. * sysdeps/ieee754/ldbl-opt/creal.c: New file. * sysdeps/ieee754/ldbl-opt/creall.c: New file. * sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file. * sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file. * sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file. * sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file. * sysdeps/ieee754/ldbl-opt/s_asinh.c: New file. * sysdeps/ieee754/ldbl-opt/s_atan.c: New file. * sysdeps/ieee754/ldbl-opt/s_cacos.c: New file. * sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file. * sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file. * sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file. * sysdeps/ieee754/ldbl-opt/s_casin.c: New file. * sysdeps/ieee754/ldbl-opt/s_casinh.c: New file. * sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file. * sysdeps/ieee754/ldbl-opt/s_casinl.c: New file. * sysdeps/ieee754/ldbl-opt/s_catan.c: New file. * sysdeps/ieee754/ldbl-opt/s_catanh.c: New file. * sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file. * sysdeps/ieee754/ldbl-opt/s_catanl.c: New file. * sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file. * sysdeps/ieee754/ldbl-opt/s_ccos.c: New file. * sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file. * sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file. * sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file. * sysdeps/ieee754/ldbl-opt/s_ceil.c: New file. * sysdeps/ieee754/ldbl-opt/s_cexp.c: New file. * sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file. * sysdeps/ieee754/ldbl-opt/s_clog.c: New file. * sysdeps/ieee754/ldbl-opt/s_clog10.c: New file. * sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file. * sysdeps/ieee754/ldbl-opt/s_clogl.c: New file. * sysdeps/ieee754/ldbl-opt/s_copysign.c: New file. * sysdeps/ieee754/ldbl-opt/s_cpow.c: New file. * sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file. * sysdeps/ieee754/ldbl-opt/s_cproj.c: New file. * sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file. * sysdeps/ieee754/ldbl-opt/s_csin.c: New file. * sysdeps/ieee754/ldbl-opt/s_csinh.c: New file. * sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file. * sysdeps/ieee754/ldbl-opt/s_csinl.c: New file. * sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file. * sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file. * sysdeps/ieee754/ldbl-opt/s_ctan.c: New file. * sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file. * sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file. * sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file. * sysdeps/ieee754/ldbl-opt/s_erf.c: New file. * sysdeps/ieee754/ldbl-opt/s_expm1.c: New file. * sysdeps/ieee754/ldbl-opt/s_fabs.c: New file. * sysdeps/ieee754/ldbl-opt/s_fdim.c: New file. * sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file. * sysdeps/ieee754/ldbl-opt/s_finite.c: New file. * sysdeps/ieee754/ldbl-opt/s_floor.c: New file. * sysdeps/ieee754/ldbl-opt/s_fma.c: New file. * sysdeps/ieee754/ldbl-opt/s_fmal.c: New file. * sysdeps/ieee754/ldbl-opt/s_fmax.c: New file. * sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file. * sysdeps/ieee754/ldbl-opt/s_fmin.c: New file. * sysdeps/ieee754/ldbl-opt/s_fminl.c: New file. * sysdeps/ieee754/ldbl-opt/s_frexp.c: New file. * sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file. * sysdeps/ieee754/ldbl-opt/s_isinf.c: New file. * sysdeps/ieee754/ldbl-opt/s_isnan.c: New file. * sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file. * sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file. * sysdeps/ieee754/ldbl-opt/s_llrint.c: New file. * sysdeps/ieee754/ldbl-opt/s_llround.c: New file. * sysdeps/ieee754/ldbl-opt/s_log1p.c: New file. * sysdeps/ieee754/ldbl-opt/s_logb.c: New file. * sysdeps/ieee754/ldbl-opt/s_lrint.c: New file. * sysdeps/ieee754/ldbl-opt/s_lround.c: New file. * sysdeps/ieee754/ldbl-opt/s_modf.c: New file. * sysdeps/ieee754/ldbl-opt/s_nan.c: New file. * sysdeps/ieee754/ldbl-opt/s_nanl.c: New file. * sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file. * sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file. * sysdeps/ieee754/ldbl-opt/s_remquo.c: New file. * sysdeps/ieee754/ldbl-opt/s_rint.c: New file. * sysdeps/ieee754/ldbl-opt/s_round.c: New file. * sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file. * sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file. * sysdeps/ieee754/ldbl-opt/s_significand.c: New file. * sysdeps/ieee754/ldbl-opt/s_significandl.c: New file. * sysdeps/ieee754/ldbl-opt/s_sin.c: New file. * sysdeps/ieee754/ldbl-opt/s_sincos.c: New file. * sysdeps/ieee754/ldbl-opt/s_tan.c: New file. * sysdeps/ieee754/ldbl-opt/s_tanh.c: New file. * sysdeps/ieee754/ldbl-opt/s_trunc.c: New file. * sysdeps/ieee754/ldbl-opt/w_acos.c: New file. * sysdeps/ieee754/ldbl-opt/w_acosh.c: New file. * sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file. * sysdeps/ieee754/ldbl-opt/w_acosl.c: New file. * sysdeps/ieee754/ldbl-opt/w_asin.c: New file. * sysdeps/ieee754/ldbl-opt/w_asinl.c: New file. * sysdeps/ieee754/ldbl-opt/w_atan2.c: New file. * sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file. * sysdeps/ieee754/ldbl-opt/w_atanh.c: New file. * sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file. * sysdeps/ieee754/ldbl-opt/w_cosh.c: New file. * sysdeps/ieee754/ldbl-opt/w_coshl.c: New file. * sysdeps/ieee754/ldbl-opt/w_drem.c: New file. * sysdeps/ieee754/ldbl-opt/w_dreml.c: New file. * sysdeps/ieee754/ldbl-opt/w_exp.c: New file. * sysdeps/ieee754/ldbl-opt/w_exp10.c: New file. * sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file. * sysdeps/ieee754/ldbl-opt/w_fmod.c: New file. * sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file. * sysdeps/ieee754/ldbl-opt/w_hypot.c: New file. * sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file. * sysdeps/ieee754/ldbl-opt/w_j0.c: New file. * sysdeps/ieee754/ldbl-opt/w_j0l.c: New file. * sysdeps/ieee754/ldbl-opt/w_j1.c: New file. * sysdeps/ieee754/ldbl-opt/w_j1l.c: New file. * sysdeps/ieee754/ldbl-opt/w_jn.c: New file. * sysdeps/ieee754/ldbl-opt/w_jnl.c: New file. * sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file. * sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file. * sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file. * sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file. * sysdeps/ieee754/ldbl-opt/w_log.c: New file. * sysdeps/ieee754/ldbl-opt/w_log10.c: New file. * sysdeps/ieee754/ldbl-opt/w_log10l.c: New file. * sysdeps/ieee754/ldbl-opt/w_log2.c: New file. * sysdeps/ieee754/ldbl-opt/w_log2l.c: New file. * sysdeps/ieee754/ldbl-opt/w_logl.c: New file. * sysdeps/ieee754/ldbl-opt/w_pow.c: New file. * sysdeps/ieee754/ldbl-opt/w_powl.c: New file. * sysdeps/ieee754/ldbl-opt/w_remainder.c: New file. * sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file. * sysdeps/ieee754/ldbl-opt/w_scalb.c: New file. * sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file. * sysdeps/ieee754/ldbl-opt/w_sinh.c: New file. * sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file. * sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file. * sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file. * sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file. * sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file. * sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32 after dbl-64. * sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION): %define this to to GLIBC_2.4. * sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file. * sysdeps/sparc/sparc32/fpu/s_fabs.c: New file. * sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file. * sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed. * sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file. * sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file. * sysdeps/sparc/sparc32/soft-fp/Versions: New file. * sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp, __unordered_v9cmp): Define differently depending on -m32 -mlong-double-{64,128}. (__signbitl, sqrtl, __ieee754_sqrtl): New inlines. * sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove. * sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines): Set. (sysdep-routines): Add sparc32-quad-routines. * sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h. (FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal function. * sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New alias to _Q_sqrt. * sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo. * sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h. * sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update. * libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW. (_IO_vfwscanf, _IO_vfwprintf): Likewise. * libio/libioP.h (_IO_vdprintf): Likewise.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper
2007-07-122.5-18.1Jakub Jelinek
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:53:36 +0000