Age | Commit message (Collapse) | Author |
|
Commit 5f828ff824e3b7cd1 ("io: Fix F_GETLK, F_SETLK, and F_SETLKW for
powerpc64") fixed an issue with the value of the lock constants on
powerpc64 when not using __USE_FILE_OFFSET64, but it ended-up also
changing the value when using __USE_FILE_OFFSET64 causing an API change.
Fix that by also checking that define, restoring the pre
4d0fe291aed3a476a commit values:
Default values:
- F_GETLK: 5
- F_SETLK: 6
- F_SETLKW: 7
With -D_FILE_OFFSET_BITS=64:
- F_GETLK: 12
- F_SETLK: 13
- F_SETLKW: 14
At the same time, it has been noticed that there was no test for io lock
with __USE_FILE_OFFSET64, so just add one.
Tested on x86_64-linux-gnu, i686-linux-gnu and
powerpc64le-unknown-linux-gnu.
Resolves: BZ #30804.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
On i686 f_type is an i32 so the test fails when that has the top bit set.
Explicitly cast to u32.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
With fortification enabled, ftruncate calls return result needs to be
checked, has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Using write without cheks leads to warn unused result when __wur is
enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
(BZ#30477)
For architecture with default 64 bit time_t support, the kernel
does not provide LFS and non-LFS values for F_GETLK, F_GETLK, and
F_GETLK (the default value used for 64 bit architecture are used).
This is might be considered an ABI break, but the currenct exported
values is bogus anyway.
The POSIX lockf is not affected since it is aliased to lockf64,
which already uses the LFS values.
Checked on i686-linux-gnu and the new tests on a riscv32.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
|
|
Fixes 85f7554cd97e7f03d8dc66278653045ef63a2221
"Add test case for O_TMPFILE handling in open, openat"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230520115531.3911877-3-bugaevc@gmail.com>
|
|
Almost all uses of rawmemchr find the end of a string. Since most targets use
a generic implementation, replacing it with strchr is better since that is
optimized by compilers into strlen (s) + s. Also fix the generic rawmemchr
implementation to use a cast to unsigned char in the if statement.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Linux 6.1 adds a new STATX_DIOALIGN constant. Add it to glibc's
bits/statx-generic.h.
Tested for x86_64.
|
|
|
|
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
|
|
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
|
|
The code assumed unsigned long can represent pointers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Newer versions of GNU grep (after grep 3.7, not inclusive) will warn on
'egrep' and 'fgrep' invocations.
Convert usages within the tree to their expanded non-aliased counterparts
to avoid irritating warnings during ./configure and the test suite.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Fangrui Song <maskray@google.com>
|
|
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
|
|
io/tst-stat and io/tst-stat-lfs fail sporadically on the Fedora
builders, and this change hopefully helps to avoid the issue.
|
|
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
Now that Hurd implementis both close_range and closefrom (f2c996597d),
we can make close_range() a base ABI, and make the default closefrom()
implementation on top of close_range().
The generic closefrom() implementation based on __getdtablesize() is
moved to generic close_range(). On Linux it will be overriden by
the auto-generation syscall while on Hurd it will be a system specific
implementation.
The closefrom() now calls close_range() and __closefrom_fallback().
Since on Hurd close_range() does not fail, __closefrom_fallback() is an
empty static inline function set by__ASSUME_CLOSE_RANGE.
The __ASSUME_CLOSE_RANGE also allows optimize Linux
__closefrom_fallback() implementation when --enable-kernel=5.9 or
higher is used.
Finally the Linux specific tst-close_range.c is moved to io and
enabled as default. The Linuxism and CLOSE_RANGE_UNSHARE are
guarded so it can be built for Hurd (I have not actually test it).
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a i686-gnu
build.
|
|
In _FORTIFY_SOURCE=3, the size expression may be non-constant,
resulting in branches in the inline functions remaining intact and
causing a tiny overhead. Clang (and in future, gcc) make sure that
the -1 case is always safe, i.e. any comparison of the generated
expression with (size_t)-1 is always false so that bit is taken care
of. The rest is avoidable since we want the _chk variant whenever we
have a size expression and it's not -1.
Rework the conditionals in a uniform way to clearly indicate two
conditions at compile time:
- Either the size is unknown (-1) or we know at compile time that the
operation length is less than the object size. We can call the
original function in this case. It could be that either the length,
object size or both are non-constant, but the compiler, through
range analysis, is able to fold the *comparison* to a constant.
- The size and length are known and the compiler can see at compile
time that operation length > object size. This is valid grounds for
a warning at compile time, followed by emitting the _chk variant.
For everything else, emit the _chk variant.
This simplifies most of the fortified function implementations and at
the same time, ensures that only one call from _chk or the regular
function is emitted.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
In the context of a function definition, the size hints imply that the
size of an object pointed to by one parameter is another parameter.
This doesn't make sense for the fortified versions of the functions
since that's the bit it's trying to validate.
This is harmless with __builtin_object_size since it has fairly simple
semantics when it comes to objects passed as function parameters.
With __builtin_dynamic_object_size we could (as my patchset for gcc[1]
already does) use the access attribute to determine the object size in
the general case but it misleads the fortified functions.
Basically the problem occurs when access attributes are present on
regular functions that have inline fortified definitions to generate
_chk variants; the attributes get inherited by these definitions,
causing problems when analyzing them. For example with poll(fds, nfds,
timeout), nfds is hinted using the __attr_access as being the size of
fds.
Now, when analyzing the inline function definition in bits/poll2.h, the
compiler sees that nfds is the size of fds and tries to use that
information in the function body. In _FORTIFY_SOURCE=3 case, where the
object size could be a non-constant expression, this information results
in the conclusion that nfds is the size of fds, which defeats the
purpose of the implementation because we're trying to check here if nfds
does indeed represent the size of fds. Hence for this case, it is best
to not have the access attribute.
With the attributes gone, the expression evaluation should get delayed
until the function is actually inlined into its destinations.
Disable the access attribute for fortified function inline functions
when building at _FORTIFY_SOURCE=3 to make this work better. The
access attributes remain for the _chk variants since they can be used
by the compiler to warn when the caller is passing invalid arguments.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2021-October/581125.html
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The 106ff08526d3ca did not take in consideration the buffer might be
reallocated if the total path is larger than PATH_MAX. The realloc
uses 'dirbuf', where 'dirstreams' is the allocated buffer.
Checked on x86_64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
The first test in the set do not require 64-bit time_t support, so there
is no need to return UNSUPPORTED for the whole test. The patch also adds
another test with arbitrary date prior y2038.
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
posix/tst-spawn5 (BZ #28260)
It ensures a continuous range of file descriptor and avoid hitting
the RLIMIT_NOFILE.
Checked on x86_64-linux-gnu.
|
|
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
Fixes commit 8a40aff86ba5f64a3a84883e539cb67b ("io: Add time64 alias
for fcntl"), commit 82c395d91ea4f69120d453aeec398e30 ("misc: Add
time64 alias for ioctl"), commit b39ffab860cd743a82c91946619f1b8158
("Linux: Add time64 alias for prctl").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/fd-util.c#L217
[2] https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/src/lxc/start.c#L236
[3] https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d867f8/Modules/_posixsubprocess.c#L220
[4] https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5e451/src/libstd/sys/unix/process2.rs#L303-L308
[5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
|
|
Hurd does not support 64-bit time_t internally.
|
|
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
It is enabled through a new rule, tests-y2038, which is built only
when the ABI supports the comapt 64-bit time_t (defined by the
header time64-compat.h, which also enables the creation of the
symbol Version for Linux). It means the tests are not built
for ABI which already provide default 64-bit time_t.
The new rule already adds the required LFS and 64-bit time_t
compiler flags.
The current coverage is:
* libc:
- adjtime tst-adjtime-time64
- adjtimex tst-adjtimex-time64
- clock_adjtime tst-clock_adjtime-time64
- clock_getres tst-clock-time64, tst-cpuclock1-time64
- clock_gettime tst-clock-time64, tst-clock2-time64,
tst-cpuclock1-time64
- clock_nanosleep tst-clock_nanosleep-time64,
tst-cpuclock1-time64
- clock_settime tst-clock2-time64
- cnd_timedwait tst-cnd-timedwait-time64
- ctime tst-ctime-time64
- ctime_r tst-ctime-time64
- difftime tst-difftime-time64
- fstat tst-stat-time64
- fstatat tst-stat-time64
- futimens tst-futimens-time64
- futimes tst-futimes-time64
- futimesat tst-futimesat-time64
- fts_* tst-fts-time64
- getitimer tst-itimer-timer64
- getrusage
- gettimeofday tst-clock_nanosleep-time64
- glob / globfree tst-gnuglob64-time64
- gmtime tst-gmtime-time64
- gmtime_r tst-gmtime-time64
- lstat tst-stat-time64
- localtime tst-y2039-time64
- localtime_t tst-y2039-time64
- lutimes tst-lutimes-time64
- mktime tst-mktime4-time64
- mq_timedreceive tst-mqueue{1248}-time64
- mq_timedsend tst-mqueue{1248}-time64
- msgctl test-sysvmsg-time64
- mtx_timedlock tst-mtx-timedlock-time64
- nanosleep tst-cpuclock{12}-time64,
tst-mqueue8-time64, tst-clock-time64
- nftw / ftw ftwtest-time64
- ntp_adjtime tst-ntp_adjtime-time64
- ntp_gettime tst-ntp_gettime-time64
- ntp_gettimex tst-ntp_gettimex-time64
- ppoll tst-ppoll-time64
- pselect tst-pselect-time64
- pthread_clockjoin_np tst-join14-time64
- pthread_cond_clockwait tst-cond11-time64
- pthread_cond_timedwait tst-abstime-time64
- pthread_mutex_clocklock tst-abstime-time64
- pthread_mutex_timedlock tst-abstime-time64
- pthread_rwlock_clockrdlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_clockwrlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_timedrdlock tst-abstime-time64, tst-rwlock14-time64
- pthread_rwlock_timedwrlock tst-abstime-time64, tst-rwlock14-time64
- pthread_timedjoin_np tst-join14-time64
- recvmmsg tst-cancel4_2-time64
- sched_rr_get_interval tst-sched_rr_get_interval-time64
- select tst-select-time64
- sem_clockwait tst-sem5-time64
- sem_timedwait tst-sem5-time64
- semctl test-sysvsem-time64
- semtimedop test-sysvsem-time64
- setitimer tst-mqueue2-time64, tst-itimer-timer64
- settimeofday tst-settimeofday-time64
- shmctl test-sysvshm-time64
- sigtimedwait tst-sigtimedwait-time64
- stat tst-stat-time64
- thrd_sleep tst-thrd-sleep-time64
- time tst-mqueue{1248}-time64
- timegm tst-timegm-time64
- timer_gettime tst-timer4-time64
- timer_settime tst-timer4-time64
- timerfd_gettime tst-timerfd-time64
- timerfd_settime tst-timerfd-time64
- timespec_get tst-timespec_get-time64
- timespec_getres tst-timespec_getres-time64
- utime tst-utime-time64
- utimensat tst-utimensat-time64
- utimes tst-utimes-time64
- wait3 tst-wait3-time64
- wait4 tst-wait4-time64
* librt:
- aio_suspend tst-aio6-time64
- mq_timedreceive tst-mqueue{1248}-time64
- mq_timedsend tst-mqueue{1248}-time64
- timer_gettime tst-timer4-time64
- timer_settime tst-timer4-time64
* libanl:
- gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Similar to fts, ftw routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
Similar to glob, fts routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
support_stat_nanoseconds cannot restore the ctime time, and
this may lead to sporadic test failures. Therefore, probe for
nanoseconds support before the initial statx call.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Some symbols have explicit versioned_symbol or compat_symbol markers
in the sources, but no corresponding entry in the Versions files.
This presently works because the local: * directive is only applied
to the base version.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
|
|
It allows run it in parallel.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Checked on x86_64-linux-gnu and i686-linux-gnu
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
It uses stat to compare against the values set by lutimes.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
It uses stat to compare against the values set by futimes.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Now that libsupport abstract Linux possible missing support (either
due FS limitation that can't handle 64 bit timestamp or architectures
that do not handle values larger than unsigned 32 bit values) the
tests can be turned generic.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also built the
tests for i686-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
The c59f716993 (accept) and 3ddf9bc185 (connect) added on io/Makefile
instead of socket/Makefile.
Checked on arm-linux-gnueabihf (where without the flags both the
tst-cancelx4 and tst-cancelx5 fails).
|
|
|