aboutsummaryrefslogtreecommitdiff
path: root/intl
AgeCommit message (Collapse)Author
2014-07-03Sync up loadmsgcat.c with gettextSiddhesh Poyarekar
2014-07-03Don't use __glibc_unlikely in shared codeSiddhesh Poyarekar
2014-07-02Fix typo and formatting in loadmsgcat.cSiddhesh Poyarekar
This reduces the differences with gettext version of loadmsgcat.c
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-06-04Include LOCPATH in default test environment.Joseph Myers
Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
2014-03-07Make tests consistently use *.out output files.Joseph Myers
This patch systematically renames miscellaneous tests so their outputs use a *.out name (unless the test is just running some glibc program with its conventional output file name, rather than a special program at all, as in catgets tests generating *.cat). In the case of the iconv test test-iconvconfig, output is redirected where it wasn't before. In various places the "generated" variable is updated to reflect the revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading) is also fixed. resolv/Makefile sets both "generate" (which appears unused) and "generated". Bitrot in the settings of these variables could no doubt be fixed so that "make clean" after build and testing leaves results the same as after configure (and indeed the tests-special / xtests-special variables could be used to simplify things, by removing those files automatically rather than listing them manually in these variables), and "make distclean" leaves an empty build directory, but right now it appears various files don't get deleted. I think they are liable to continue to bitrot in the absence of routine testing that these targets actually work, given that building in the source directory isn't supported and that was the main use of such makefile targets. Tested x86_64. * elf/Makefile (tests-special): Rename tests to end with .out. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem.out): Likewise. * iconv/Makefile (xtests-special): Change test-iconvconfig to $(objpfx)test-iconvconfig.out. (test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use set -e inside subshell and redirect output to file. * iconvdata/Makefile (generated): Rename tests to end with .out. Correct type. (tests-special): Rename tests to end with .out. ($(objpfx)mtrace-tst-loading): Likewise. * intl/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)mtrace-tst-gettext): Likewise. * misc/Makefile (generated): Likewise. (tests-special): Likewise. ($(objpfx)tst-error1-mem): Likewise. * nptl/Makefile (tests-special): Likewise. ($(objpfx)tst-stack3-mem): Likewise. (generated): Likewise. * posix/Makefile (generated): Likewise. (tests-special): Likewise. (xtests-special): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile (generate): Likewise. (tests-special): Likewise. (xtests-special): Likewise. (generated): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. localedata: * Makefile (generated): Rename tests to end with .out. (tests-special): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-10Use glibc_likely instead __builtin_expect.Ondřej Bílka
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae
2013-06-08Use (void) in no-arguments function definitions.Joseph Myers
2013-05-22Fix _nl_find_msg malloc failure case, and callers.Carlos O'Donell
This patch fixes two issues, and perhaps should be two distinct commits, but I present it here as one for the sake of completeness. Commit 006dd86111c44572dbd3b26e9c63dd0f834d7762 fails to check malloc's return in intl/dcigettext.c (_nl_find_msg): ~~~ freemem_size = INITIAL_BLOCK_SIZE; newmem = (transmem_block_t *) malloc (freemem_size); ... newmem->next = transmem_list; transmem_list = newmem; ~~~ If malloc fails then newmem is NULL then newmem->next results in a fault. The fix is easy enough, check for newmem != NULL, and fall through to the error condition below which returns (char *) -1 e.g. resource error. The problem is that returning (char *) -1 will break all sorts of other code, so while what we did is correct, the real failure case fix is slightly broader. There are 4 other places where _nl_find_msg is called, one is OK, the other three are fixed to handle -1 error return value. No regressions on x86-64 or x86. However, no regressions isn't really a useful metric for this code. The change was tested as documented here: http://sourceware.org/glibc/wiki/Testing/WhiteBox using SystemTap for fault injection to simulate malloc failure. --- 2013-05-03 Carlos O'Donell <carlos at redhat.com> [BZ #15441] * intl/dcigettext.c (DCIGETTEXT): Skip translating if _nl_find_msg returns -1. (_nl_find_msg): Return -1 if recursive call returned -1. If newmem is null return -1. * intl/loadmsgcat.c (_nl_load_domain): If _nl_find_msg returns -1 abort loading the domain.
2013-02-15Remove bounded-pointers build system support.Joseph Myers
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers
2012-10-24Define and use $(run-built-tests).Joseph Myers
2012-10-19Use $(run-program-prefix) in more shell script tests.Joseph Myers
2012-09-25Set "fail on error" mode directly in testsuite shell scriptsDmitry V. Levin
2012-08-17Fix rule dependency in last change.Roland McGrath
2012-08-172012-08-17 Jeff Law <law@redhat.com>Jeff Law
* intl/Makefile (codeset_mo): New variable. ($(codeset_mo)): New target. (tst-codeset.out): Depend on that. Remove explicit rule. (tst-gettext3.out, tst-gettext5.out): Likewise. (LOCPATH-ENV, tst-codeset-ENV): New variables. (tst-gettext3-ENV, tst-gettext5-ENV): Likewise. * intl/tst-codeset.sh: Remove. * intl/tst-gettext3.sh: Likewise. * intl/tst-gettext5.sh: Likewise.
2012-07-30Fix lots of bitrot for stub configurations.Roland McGrath
2012-07-04Fix tst-gettext testAndreas Schwab
2012-06-21Update copyright yearsJeff Law
2012-06-21 [BZ #14277]Jeff Law
* intl/dcigettext.c (_nl_find_msg): Avoid use after potential free. Simplify list management for _LIBC case.
2012-05-24Remove use of INTDEF/INTUSE in intlAndreas Schwab
2012-03-10Replace FSF snail mail address with URL in Yacc input.Paul Eggert
2012-03-07Remove distribute variable from MakefilesUlrich Drepper
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert
2012-01-07Remove pre-ISO C supportUlrich Drepper
No more __const.
2011-11-15Clean up internal fopen usesUlrich Drepper
No need to ever not use c and e.
2011-11-08Use strcasecmp_l instead of strcasecmpUlrich Drepper
2011-10-23More WSUlrich Drepper
2011-10-23Fix WSUlrich Drepper
2011-10-23Regnerate with modern bisonUlrich Drepper
2011-09-10Cleanup of configuration optionsUlrich Drepper
Make several tool features mandatory and simplify the code.
2011-09-08Remove support for automatic cvs check-insUlrich Drepper
CVS use for glibc is long gone.
2011-08-13Fix compile problemUlrich Drepper
l10nflist compiles for localedef now. Optimize a bit.
2011-08-11Minor optimization of popcount in l10nflistUlrich Drepper
2011-08-11Locale-independent parsing in libintlUlrich Drepper
2011-07-20dcigettext.c: Add missing bracketMarek Polacek
2009-05-16Remove redundant .gitignore files.Andreas Schwab
2009-05-15rename each .cvsignore file to .gitignoreJim Meyering
2009-02-05* intl/dcigettext.c (DCIGETTEXT): Avoid some code duplication.Ulrich Drepper
2008-03-31[BZ #5443]Ulrich Drepper
2008-03-30 Ulrich Drepper <drepper@redhat.com> [BZ #5443] * intl/dcigettext.c (__dcigettext): Get reader lock for locale data before looking for translation. * locale/duplocale.c: Transform __libc_setlocale_lock into rwlock. * locale/freelocale.c: Likewise. * locale/newlocale.c: Likewise. * locale/setlocale.c: Likewise. Based partially on a patch by ryo@np.css.fujitsu.com.
2008-03-30* intl/dcigettext.c (_nl_find_msg): Reread nconversions afterUlrich Drepper
acquiring wrlock. Do conv_tab allocation while holding lock. * intl/Makefile: Add rules to build and run tst-gettext6. * intl/tst-gettext6.c: New test. * intl/tst-gettext6.sh: New file.
2008-03-19Remove useless "if" before "free".Ulrich Drepper
2007-11-17(struct known_translation_t): Turn msgid into a union. (transcmp): Use the ↵Ulrich Drepper
appropriate part of s1->msgid and s2->msgid. (DCIGETTEXT): Change the allocation of the 'search' variable so that it needs only fixed stack space. Delay the initialization of msgid_len until it is needed.
2007-10-28[BZ #5222]Ulrich Drepper
2007-10-28 Ulrich Drepper <drepper@redhat.com> [BZ #5222] * elf/dl-load.c (_dl_rtld_di_serinfo): Correct handling of short path elements in counting mode.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 01:42:23 +0000