| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It has been a long practice for software using IEEE 754 floating-point
arithmetic run on MIPS processors to use an encoding of Not-a-Number
(NaN) data different to one used by software run on other processors.
And as of IEEE 754-2008 revision [1] this encoding does not follow one
recommended in the standard, as specified in section 6.2.1, where it
is stated that quiet NaNs should have the first bit (d1) of their
significand set to 1 while signalling NaNs should have that bit set to
0, but MIPS software interprets the two bits in the opposite manner.
As from revision 3.50 [2][3] the MIPS Architecture provides for
processors that support the IEEE 754-2008 preferred NaN encoding format.
As the two formats (further referred to as "legacy NaN" and "2008 NaN")
are incompatible to each other, tools have to provide support for the
two formats to help people avoid using incompatible binary modules.
The change is comprised of two functional groups of features, both of
which are required for correct support.
1. Dynamic linker support.
To enforce the NaN encoding requirement in dynamic linking a new ELF
file header flag has been defined. This flag is set for 2008-NaN
shared modules and executables and clear for legacy-NaN ones. The
dynamic linker silently ignores any incompatible modules it
encounters in dependency processing.
To avoid unnecessary processing of incompatible modules in the
presence of a shared module cache, a set of new cache flags has been
defined to mark 2008-NaN modules for the three ABIs supported.
Changes to sysdeps/unix/sysv/linux/mips/readelflib.c have been made
following an earlier code quality suggestion made here:
http://sourceware.org/ml/libc-ports/2009-03/msg00036.html
and are therefore a little bit more extensive than the minimum
required.
Finally a new name has been defined for the dynamic linker so that
2008-NaN and legacy-NaN binaries can coexist on a single system that
supports dual-mode operation and that a legacy dynamic linker that
does not support verifying the 2008-NaN ELF file header flag is not
chosen to interpret a 2008-NaN binary by accident.
2. Floating environment support.
IEEE 754-2008 features are controlled in the Floating-Point Control
and Status (FCSR) register and updates are needed to floating
environment support so that the 2008-NaN flag is set correctly and
the kernel default, inferred from the 2008-NaN ELF file header flag
at the time an executable is loaded, respected.
As the NaN encoding format is a property of GCC code generation that is
both a user-selected GCC configuration default and can be overridden
with GCC options, code that needs to know what NaN encoding standard it
has been configured for checks for the __mips_nan2008 macro that is
defined internally by GCC whenever the 2008-NaN mode has been selected.
This mode is determined at the glibc configuration time and therefore a
few consistency checks have been added to catch cases where compilation
flags have been overridden by the user.
The 2008 NaN set of features relies on kernel support as the in-kernel
floating-point emulator needs to be aware of the NaN encoding used even
on hard-float processors and configure the FPU context according to the
value of the 2008 NaN ELF file header flag of the executable being
started. As at this time work on kernel support is still in progress
and the relevant changes have not made their way yet to linux.org master
repository.
Therefore the minimum version supported has been artificially set to
10.0.0 so that 2008-NaN code is not accidentally run on a Linux kernel
that does not suppport it. It is anticipated that the version is
adjusted later on to the actual initial linux.org kernel version to
support this feature. Legacy NaN encoding support is unaffected, older
kernel versions remain supported.
[1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer
Society, IEEE Std 754-2008, 29 August 2008
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012
[3] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012
|
|
|
|
|
|
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
|
|
|
|
|
|
* elf/elf.h (EF_MIPS_ARCH_32): Fix value.
(EF_MIPS_ARCH_64): Fix value.
(EF_MIPS_ARCH_32R2): New.
(EF_MIPS_ARCH_64R2): New.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add new ARM and s390 note constants e.g. NT_*.
|
|
|
|
|
|
Add support for STT_GNU_IFUNC symbols and the new R_390_IRELATIVE
relocation. Provide optimized version of memcpy, memset, and memcmp
for z10 and z196.
|
|
|
|
* elf/elf.h (R_SPARC_WDISP10): Define.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Handle
R_SPARC_SIZE32.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Handle
R_SPARC_SIZE64 and R_SPARC_H34.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add support for the IRELAIVE relocation and IFUNC in static executables.
|
|
* elf/elf.h: Add various missing ARM constants, to match binutils.
|
|
|
|
* elf/elf.h (R_SPARC_GLOB_JMP): New macro.
(R_SPARC_GOTDATA_HIX22, R_SPARC_GOTDATA_LOX10): New macros.
(R_SPARC_GOTDATA_OP_HIX22, R_SPARC_GOTDATA_OP_LOX10): Likewise.
(R_SPARC_GOTDATA_OP, R_SPARC_H34): Likewise.
(R_SPARC_SIZE32, R_SPARC_SIZE64): Likewise.
(R_SPARC_GNU_VTINHERIT, R_SPARC_GNU_VTENTRY, R_SPARC_REV32): Likewise.
(R_SPARC_NUM): Update.
From Dave Miller <davem@davemloft.net>.
|
|
* configure.in: Handle --enable-multi-arch.
* elf/dl-runtime.c (_dl_fixup): Handle STT_GNU_IFUNC.
(_dl_fixup_profile): Likewise.
* elf/do-lookup.c (dl_lookup_x): Likewise.
* sysdeps/x86_64/dl-machine.h: Handle STT_GNU_IFUNC.
* elf/elf.h (STT_GNU_IFUNC): Define.
* include/libc-symbols.h (libc_ifunc): Define.
* sysdeps/x86_64/cacheinfo.c: If USE_MULTIARCH is defined, use the
framework in init-arch.h to get CPUID values.
* sysdeps/x86_64/multiarch/Makefile: New file.
* sysdeps/x86_64/multiarch/init-arch.c: New file.
* sysdeps/x86_64/multiarch/init-arch.h: New file.
* sysdeps/x86_64/multiarch/sched_cpucount.c: New file.
* config.make.in (experimental-malloc): Define.
* configure.in: Handle --enable-experimental-malloc.
* malloc/Makefile: Handle experimental-malloc flag.
* malloc/malloc.c: Implement PER_THREAD and ATOMIC_FASTBINS features.
* malloc/arena.c: Likewise.
* malloc/hooks.c: Likewise.
* malloc/malloc.h: Define M_ARENA_TEST and M_ARENA_MAX.
|
|
|
|
(NT_PPC_VSX): New macro.
|
|
* elf/elf.h (STO_MIPS_PLT): New.
(R_MIPS_COPY): New.
(R_MIPS_JUMP_SLOT): New.
(R_MIPS_NUM): Redefine to 128.
(DT_MIPS_PLTGOT): New.
(DT_MIPS_RWPLT): New.
(DT_MIPS_NUM): Redefine to 0x35.
|
|
* elf/rtld.c [!__ASSUME_AT_EXECFN] (process_envvars): Don't handle
LD_ORIGIN_PATH.
* elf/dl-sysdep.c (_dl_sysdep_start): Handle AT_EXECFN.
* elf/dl-support.c: Define _dl_execfn. Don't define _dl_origin_path
if __ASSUME_AT_EXECFN is defined.
(_dl_aux_init): Handle AT_EXECFN.
* sysdeps/unix/sysv/linux/kernel-features.h: Define __ASSUME_AT_EXECFN
for 2.6.27 and up.
* sysdeps/generic/ldsodefs.h (rtld_global_ro): Add _dl_execfn.
Don't define _dl_origin_path if __ASSUME_AT_EXECFN is defined.
* sysdeps/unix/sysv/linux/dl-origin.c (_dl_get_origin): Use
_dl_execfn if available and avoid compatibility code if
__ASSUME_AT_EXECFN is defined.
|
|
* include/inline-hashtab.h: New file, copied from 2005's
libiberty, with fix for memory leak imported afterwards by
Glauber de Oliveira Costa.
* elf/tlsdeschtab.h: New file.
* elf/dl-reloc.c (_dl_try_allocate_static_tls): Extract from...
(_dl_allocate_static_tls): ... here. Rearrange failure path.
(CHECK_STATIC_TLS): Move to...
* elf/dynamic-link.h: ... this file.
(TRY_STATIC_TLS): New macro.
* elf/dl-conflict.c (CHECK_STATIC_TLS, TRY_STATIC_TLS): Override.
* elf/elf.h (R_386_TLS_GOTDESC, R_386_TLS_DESC_CALL,
R_386_TLS_DESC): Define.
(R_X86_64_PC64, R_X86_GOTOFF64, R_X86_64_GOTPC32): Merge from
binutils.
(R_X86_64_GOTPC32_TLSDESC, R_X86_64_TLSDESC_CALL,
R_X86_64_TLSDESC): Define.
(R_386_NUM, R_X86_64_NUM): Adjust.
* sysdeps/i386/Makefile (sysdep-dl-routines, sysdep_routines,
systep-rtld-routines): Add tlsdesc and dl-tlsdesc for elf subdir.
(gen-as-const-headers): Add tlsdesc.sym to csu subdir.
* sysdeps/i386/dl-lookupcfg.h: New file. Introduce _dl_unmap to
release tlsdesc_table.
* sysdeps/i386/dl-machine.h: Include dl-tlsdesc.h.
(elf_machine_type_class): Mark R_386_TLS_DESC as PLT class.
(elf_machine_rel): Handle R_386_TLS_DESC.
(elf_machine_rela): Likewise.
(elf_machine_lazy_rel): Likewise.
(elf_machine_lazy_rela): Likewise.
* sysdeps/i386/dl-tls.h (struct dl_tls_index): Name it.
* sysdeps/i386/dl-tlsdesc.S: New file.
* sysdeps/i386/dl-tlsdesc.h: New file.
* sysdeps/i386/tlsdesc.c: New file.
* sysdeps/i386/tlsdesc.sym: New file.
* sysdeps/i386/bits/linkmap.h (struct link_map_machine): Add
tlsdesc_table.
* sysdeps/x86_64/Makefile (sysdep-dl-routines, sysdep_routines,
systep-rtld-routines): Add tlsdesc and dl-tlsdesc for elf subdir.
(gen-as-const-headers): Add tlsdesc.sym to csu subdir.
* sysdeps/x86_64/dl-lookupcfg.h: New file. Introduce _dl_unmap to
release tlsdesc_table.
* sysdeps/x86_64/dl-machine.h: Include dl-tlsdesc.h.
(elf_machine_runtime_setup): Set up lazy TLSDESC GOT entry.
(elf_machine_type_class): Mark R_X86_64_TLSDESC as PLT class.
(elf_machine_rel): Handle R_X86_64_TLSDESC.
(elf_machine_rela): Likewise.
(elf_machine_lazy_rel): Likewise.
* sysdeps/x86_64/dl-tls.h (struct dl_tls_index): Name it.
(__tls_get_addr): Do not declare for non-shared compiles.
* sysdeps/x86_64/dl-tlsdesc.S: New file.
* sysdeps/x86_64/dl-tlsdesc.h: New file.
* sysdeps/x86_64/tlsdesc.c: New file.
* sysdeps/x86_64/tlsdesc.sym: New file.
* sysdeps/x86_64/bits/linkmap.h (struct link_map_machine): Add
tlsdesc_table for both 32- and 64-bit structs.
|
|
* elf/elf.h (SHT_GNU_ATTRIBUTES): New macro.
|
