Age | Commit message (Collapse) | Author |
|
This patch makes conformtest skip execution tests when
cross-compiling, as an interim step towards running most of these
tests (presently disabled) in that case. It omits the (obvious)
Makefile change to actually enable the conformtest tests when
cross-compiling, as there are still enough failures seen with
build-many-glibcs.py that I'd like to get the results cleaner before
enabling these tests.
Tested for x86_64, and with the tests actually enabled for
cross-compilation with build-many-glibcs.py.
* conform/conformtest.pl ($cross): New variable.
(--cross): New command-line option.
(runtest): Skip test execution when cross-compiling.
* conform/Makefile (conformtest-cross): New variable.
($(conformtest-header-tests)): Pass $(conformtest-cross) to
conformtest.pl.
|
|
conformtest has an internal XFAIL mechanism to allow failures of
individual expectations to be ignored, so that known hard-to-fix
failures (e.g. those affecting ABIs or requiring kernel changes) do
not cause the overall tests to FAIL and so hide other failures from
the same (header, standard) pair.
Various such bugs are system-specific, so this patch adds a mechanism
to allow system-specific XFAILs. A system-independent XFAIL is
achieved by putting "xfail-" at the start of the relevant expectation
in the *-data files. A system-specific XFAIL instead uses
"xfail[cond]-", where "cond" is a condition listed in
conformtest-xfail-conds in a sysdeps makefile (so one for x32 might
set conformtest-xfail-conds = x86_64-x32-linux, for example, and then
an expectation for tv_nsec's type could use
xfail[x86_64-x32-linux]-). The actual names are arbitrary, just
needing to match between the makefiles and the expectations, and if
necessary you can use "xfail[cond1|cond2]-" for a test that is
expected to fail under multiple conditions. As with
system-independent XFAILs, I think system-specific ones should have a
bug filed in Bugzilla and a comment referencing that bug.
Tested for x86_64, including with test expectations and makefiles
changed to use the new facility.
* conform/conformtest.pl ($xfail_str): New variable.
(--xfail=): New command-line option.
(top level): Handle expectations starting xfail[cond]-.
* conform/Makefile (conformtest-xfail): New variable.
($(conformtest-header-tests)): Pass $(conformtest-xfail) to
conformtest.pl.
|
|
|
|
|
|
When I set up linknamespace testing, the lists of libraries that might
contain functions from various standards were based on the -l options
POSIX says may be required to find certain functions with the c99
utility.
glibc has some POSIX functions in the libdl and libcrypt libraries,
not mentioned in the definition of the c99 utility (so an
implementation of that utility using glibc would need to use -ldl
-lcrypt automatically). This patch adds those libraries to the ones
considered in linknamespace testing for relevant standards. (The
crypt functions are XSI only, present in XPG3 and above; the libdl
ones were added in UNIX98, then moved from XSI to BASE in the 2008
edition of POSIX.)
* conform/Makefile (linknamespace-libs): Rename to
linknamespace-libs-thr.
(linknamespace-libs-posix): New variable.
(linknamespace-libs-xsi): Likewise.
(linknamespace-libs-XPG3): Include libcrypt.a.
(linknamespace-libs-XPG4): Use $(linknamespace-libs-XPG3).
(linknamespace-libs-POSIX): Use $(linknamespace-libs-thr).
(linknamespace-libs-UNIX98): Use $(linknamespace-libs-xsi).
(linknamespace-libs-XOPEN2K): Likewise.
(linknamespace-libs-XOPEN2K8): Likewise.
(linknamespace-libs-POSIX2008): Use $(linknamespace-libs-posix).
|
|
Having found that with my script to build many glibc variants I could
reproduce the linknamespace test failures in parallel builds (that
various people had previously reported but I hadn't seen myself), I
investigated those failures further. This patch adds a missing
dependency to those tests.
Tested for x86_64, including the configuration where I saw those
failures and where I don't see them with this patch.
* conform/Makefile ($(linknamespace-header-tests)): Also depend on
$(linknamespace-symlists-tests).
|
|
Historically perl includes the current directory in the module search
path. Over the time this has been considered as a security issue and
the recent vulnerabilities [1] made people to reconsider this behaviour.
It is almost sure that this will be removed in the future [2], possibly
for the 5.26 release, although this is not yet firmly decided.
Debian has decided to backport the patches [3], so the perl binary in
unstable do not have '.' in @INC anymore.
This behaviour is used in the conform perl scripts to include the
GlibcConform module. This patch fixes that by calling perl with '-I.'.
This is not a security issue in this case as make ensures that the
current directory is $(srcdir)/conform/ when the scripts are called.
Passing the full path would do exactly the same.
[1] CVE-2016-1238 CVE-2016-6185
[2] https://rt.perl.org/Public/Bug/Display.html?id=127810
[3] https://lists.debian.org/debian-devel-announce/2016/08/msg00013.html
Changelog:
* conform/Makefile (conformtest-header-tests): Pass -I. to $(PERL).
(linknamespace-symlists-tests): Likewise.
(linknamespace-header-tests): Likewise.
|
|
The conform/ test of limits.h namespace for XPG3 was failing because
of NL_* and NZERO defines. Those symbols are EX-shaded, not
UX-shaded, so it's correct for them to be defined for XPG3; this patch
corrects the expectations accordingly. (Actually it looks like they
should not be listed as optional for these standards, but that's
another matter.)
Tested for x86_64 and x86.
* conform/data/limits.h-data (CHARCLASS_NAME_MAX): Also expect for
[XPG3 || XPG4].
(NL_ARGMAX): Also expect for [XPG3].
(NL_LANGMAX): Likewise.
(NL_MSGMAX): Likewise.
(NL_NMAX): Likewise.
(NL_SETMAX): Likewise.
(NL_TEXTMAX): Likewise.
(NZERO): Likewise.
(TMP_MAX): Likewise.
* conform/Makefile (test-xfail-XPG3/limits.h/conform): Remove
variable.
|
|
This patch corrects various conformtest expectations in ftw.h for XPG3
and XPG4.
Tested for x86_64 and x86.
* conform/data/ftw.h-data (struct FTW): Do not expect for [XPG3].
(FTW_DP): Do not expect for [XPG3 || XPG4].
(FTW_SL): Do not expect for [XPG3].
(FTW_SLN): Likewise.
(FTW_PHYS): Likewise.
(FTW_MOUNT): Likewise.
(FTW_DEPTH): Likewise.
(FTW_CHDIR): Likewise.
(nftw): Likewise.
* conform/Makefile (test-xfail-XPG3/ftw.h/conform): Remove
variable.
|
|
This patch corrects some conformtest expectations for pwd.h for XPG4.
Tested for x86_64 and x86.
* conform/data/pwd.h-data (endpwent): Do not expect for [XPG3].
(getpwent): Likewise.
(setpwent): Likewise.
* conform/Makefile (test-xfail-XPG3/pwd.h/conform): Remove
variable.
|
|
This patch corrects some conformtest expectations for search.h for
XPG3.
Tested for x86_64 and x86.
* conform/data/search.h-data (insque): Do not expect for [XPG3].
(remque): Likewise.
* conform/Makefile (test-xfail-XPG3/search.h/conform): Remove
variable.
|
|
stdlib.h declares grantpt, ptsname, unlockpt for __USE_XOPEN. This
patch corrects the condition to __USE_XOPEN_EXTENDED (these functions
are new in XPG4).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20094]
* stdlib/stdlib.h (grantpt): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
(unlockpt): Likewise.
(ptsname): Likewise.
* conform/Makefile (test-xfail-XPG3/stdlib.h/conform): Remove
variable.
|
|
sys/stat.h should define S_IFSOCK and S_ISSOCK for XPG4 (XNS), but
does not. This patch corrects the relevant header conditionals.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20076]
* io/sys/stat.h (S_IFSOCK): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(S_ISSOCK): Likewise.
* conform/Makefile (test-xfail-XPG4/sys/stat.h/conform): Remove
variable.
|
|
stdlib.h declares rand_r if __USE_POSIX; i.e., POSIX.1:1990. But
rand_r was added along with threads, so the condition should be
__USE_POSIX199506. This patch corrects the condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20074]
* stdlib/stdlib.h (rand_r): Declare if [__USE_POSIX199506], not if
[__USE_POSIX].
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove
variable.
|
|
UNIX98 and XPG4 have ttyslot in <stdlib.h>. glibc, however, has it in
<unistd.h>, for __USE_MISC || (__USE_XOPEN_EXTENDED && !__USE_UNIX98),
but no supported standard has it in <unistd.h>.
This patch adds a properly conditioned declaration to <stdlib.h> (only
enabled for the relevant standards, not for __USE_MISC or __USE_GNU).
The <unistd.h> declaration is restricted to __USE_MISC. Some relevant
XFAILs are removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20051]
* posix/unistd.h [__USE_XOPEN_EXTENDED && !__USE_UNIX98]
(ttyslot): Do not declare.
* stdlib/stdlib.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K]
(ttyslot): New prototype.
* conform/Makefile (test-xfail-XPG4/unistd.h/conform): Remove
variable.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
|
|
This patch corrects a spurious conformtest expectation of strdup in
string.h for XPG3.
Tested for x86_64 and x86.
* conform/data/string.h-data (strdup): Do not expect for [XPG3].
* conform/Makefile (test-xfail-XPG3/string.h/conform): Remove
variable.
|
|
This patch corrects spurious conformtest expectations of getdate and
getdate_err for XPG3. (This is not based on a full review of the
expectations, so there may be other issues where the header and tests
agree but are both incorrect.)
Tested for x86_64 and x86.
* conform/data/time.h-data (getdate_err): Do not expect for
[XPG3].
(getdate): Likewise.
* conform/Makefile (test-xfail-XPG3/time.h/conform): Remove
variable.
|
|
The conformtest tests of unistd.h fail for XPG3 because of various
expectations that are incorrect for XPG3. This patch corrects those
bogus expectations, and one bogus expectation for XPG4. (This is not
based on a full review of the standards so there may well still be
other bugs in the expectations for this header.)
Tested for x86_64 and x86.
* conform/data/unistd.h-data (F_LOCK): Do not expect for [XPG3].
(F_ULOCK): Likewise.
(F_TEST): Likewise.
(F_TLOCK): Likewise.
(useconds_t): Likewise.
(intptr_t): Do not expect for [XPG3] or [XPG4].
(brk): Do not expect for [XPG3]
(fchown): Likewise.
(fchdir): Likewise.
(ftruncate): Likewise.
(getdtablesize): Likewise.
(gethostid): Likewise.
(getpagesize): Likewise.
(getpgid): Likewise.
(getsid): Likewise.
(getwd): Likewise.
(lchown): Likewise.
(lockf): Likewise.
(readlink): Likewise.
(sbrk): Likewise.
(setpgrp): Likewise.
(setregid): Likewise.
(setreuid): Likewise.
(symlink): Likewise.
(sync): Likewise.
(truncate): Likewise.
(ualarm): Likewise.
(usleep): Likewise.
(vfork): Likewise.
* conform/Makefile (test-xfail-XPG3/unistd.h/conform): Remove
variable.
|
|
The conform/ tests for fcntl.h are failing for XPG3 and XPG4 because
of missing S_IFSOCK.
This is a case of a bogus test. The relevant wording requiring such
constants is, in current POSIX (and this requirement dates back as far
as XPG4), "The <fcntl.h> header shall define the symbolic constants
for file modes for use as values of mode_t as described in
<sys/stat.h>.". Note that this is *file modes* not *file types*.
That makes sense, since the point is presumably for use with functions
such as open that are declared in fcntl.h, where file modes are
relevant but file types aren't. So this patch removes all those
spurious S_IF* expectations for fcntl.h (the macros are generally
still *allowed* through the permission to make everything from
sys/stat.h visible).
Tested for x86_64 and x86.
* conform/data/fcntl.h-data [!POSIX] (S_IFMT): Do not expect.
[!POSIX] (S_IFBLK): Likewise.
[!POSIX] (S_IFCHR): Likewise.
[!POSIX] (S_IFIFO): Likewise.
[!POSIX] (S_IFREG): Likewise.
[!POSIX] (S_IFDIR): Likewise.
[!POSIX] (S_IFLNK): Likewise.
[!POSIX] (S_IFSOCK): Likewise.
* conform/Makefile (test-xfail-XPG3/fcntl.h/conform): Remove
variable.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
|
|
termios.h should declare tcgetsid for XPG4, but only does so for
__USE_UNIX98 || __USE_XOPEN2K8 at present. This patch fixes the
declaration conditions. A spurious conformtest expectation of this
declaration for XPG3 is removed, and two XFAILs that are fixed by
these changes are also removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20055]
* termios/termios.h (pid_t): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(tcgetsid): Declare for [__USE_XOPEN_EXTENDED] instead of
[__USE_UNIX98].
* conform/data/termios.h-data (tcgetsid): Do not expect for
[XPG3].
* conform/Makefile (test-xfail-XPG3/termios.h/conform): Remove
variable.
(test-xfail-XPG4/termios.h/conform): Likewise.
|
|
sys/stat.h declares fchmod if __USE_POSIX (i.e. POSIX.1:1990). But it
was actually added in 1993 and also in XPG4. This patch changes the
conditions to the correct __USE_POSIX199309 || __USE_XOPEN_EXTENDED.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20073]
* io/sys/stat.h (fchmod): Declare for
[__USE_POSIX199309 || __USE_XOPEN_EXTENDED], not [__USE_POSIX].
* conform/Makefile (test-xfail-XPG3/sys/stat.h/conform): Remove
variable.
|
|
For UNIX98 (only), unistd.h should declare pthread_atfork, but that
declaration is missing. This patch adds it.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20044]
* posix/unistd.h [__USE_UNIX98 && !__USE_XOPEN2K]
(pthread_atfork): New prototype.
* conform/Makefile (test-xfail-UNIX98/unistd.h/conform): Remove
variable.
|
|
The conformtest tests for sys/types.h for XPG3 and XPG4 fail because
of missing blksize_t. This is a bug in the expectations; that type is
not part of those standards. This patch stops the tests from
expecting it, and some other types that also are not part of XPG3 and
XPG4.
Tested for x86_64 and x86.
* conform/data/sys/types.h-data (blkcnt_t): Do not expect for
[XPG3 || XPG4].
(blksize_t): Likewise.
(clockid_t): Likewise.
* conform/Makefile (test-xfail-XPG3/sys/types.h/conform): Remove
variable.
(test-xfail-XPG4/sys/types.h/conform): Likewise.
|
|
For UNIX98 and older standards, sys/time.h should not define struct
timespec, but does so via the inclusion of sys/select.h (which is a
new header in the 2001 edition of POSIX, and defines struct timespec
because of the declaration of pselect, a new function in the 2001
edition of POSIX). In turn, this affects some other headers that
themselves include sys/time.h.
This patch fixes this by conditioning the __need_timespec definition
in sys/select.h on __USE_XOPEN2K, the same condition used there for
the declaration of pselect (this has no effect on direct uses of
sys/select.h with feature test macros for any standard that includes
that header, since such standards result in __USE_XOPEN2K being
defined).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20041]
* misc/sys/select.h (__need_timespec): Only define if
[__USE_XOPEN2K].
* conform/Makefile (test-xfail-XPG4/sys/time.h/conform): Remove
variable.
(test-xfail-XPG4/utmpx.h/conform): Likewise.
(test-xfail-UNIX98/sys/time.h/conform): Likewise.
(test-xfail-UNIX98/utmpx.h/conform): Likewise.
|
|
fcntl.h defines struct timespec if __USE_XOPEN || __USE_XOPEN2K8. But
(a) the subsequent bits/stat.h include only needs it if __USE_XOPEN2K8
and (b) older standards did not allow struct timespec here. (It's
allowed for newer standards by virtue of the permission to include
symbols from sys/stat.h. But sys/stat.h is only required to provide
struct timespec from the 2008 edition of POSIX onwards, and permitted
by the 2004 TC to the 2001 edition in anticipation of the addition of
nanosecond timestamp support to struct stat in the 2008 edition.)
This patch limits the timespec definition to the __USE_XOPEN2K8 case,
that being the only case where it is actually needed for the
<bits/stat.h> include.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20023]
* io/fcntl.h [__USE_XOPEN && !__USE_XOPEN2K8]: Do not include
<time.h>.
* conform/Makefile (test-xfail-UNIX98/fcntl.h/conform): Remove
variable.
(test-xfail-XOPEN2K/fcntl.h/conform): Likewise.
|
|
stdio.h declares flockfile, ftrylockfile, funlockfile, getc_unlocked,
getchar_unlocked, putc_unlocked and putchar_unlocked if __USE_POSIX,
with comments "These are defined in POSIX.1:1996.". But __USE_POSIX
is actually POSIX.1:1990, and these functions should not be declared
for 1990 / 1992 / 1993 POSIX, XPG3 or XPG4. This patch fixes stdio.h
to use __USE_POSIX199506 instead for those conditionals, as that is
the correct conditional for the version of POSIX that introduced
threads, and with threads those functions.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20014]
* libio/stdio.h (getc_unlocked): Declare if [__USE_POSIX199506],
not [__USE_POSIX].
(getchar_unlocked): Likewise.
(putc_unlocked): Likewise.
(putchar_unlocked): Likewise.
(flockfile): Likewise.
(ftrylockfile): Likewise.
(funlockfile): Likewise.
* conform/Makefile (test-xfail-XPG3/stdio.h/conform): Remove
variable.
(test-xfail-XPG4/stdio.h/conform): Likewise.
|
|
The conformtest expectations for langinfo.h fail to include the YESSTR
and NOSTR constants that were present in UNIX98 and earlier XPG
standards. This patch adds those expectations, so fixing three
XFAILs.
Tested for x86_64 and x86.
* conform/data/langinfo.h-data [XPG3 || XPG4 || UNIX98] (YESSTR):
Expect constant.
[XPG3 || XPG4 || UNIX98] (NOSTR): Likewise.
* conform/Makefile (test-xfail-XPG3/langinfo.h/conform): Remove
variable.
(test-xfail-XPG4/langinfo.h/conform): Likewise.
(test-xfail-UNIX98/langinfo.h/conform): Likewise.
|
|
Similar to my previous fix for XOPEN2K
<https://sourceware.org/ml/libc-alpha/2016-04/msg00631.html>, now that
bugs in the conformtest expectations for stdio.h for UNIX98 have been
corrected, that case too fails because fseeko and ftello are now
correctly expected, but off_t is not defined. As in that fix, it
seems appropriate to define off_t in stdio.h for this standard as
well, and this patch does so.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* libio/stdio.h (off_t): Also define if [__USE_UNIX98].
[__USE_LARGEFILE64] (off64_t): Likewise.
* conform/Makefile (test-xfail-UNIX98/stdio.h/conform): Remove
variable.
|
|
The conformtest expectations for signal.h have various declarations
that are expected for POSIX (1996) and all later standards, except,
wrongly, for XOPEN2K. This shows up as failures of tests for two
other headers, which are allowed to make visible symbols from
signal.h, because of an incorrect namespace failure for sigval
(required in signal.h in XOPEN2K, so should be allowed for those other
headers); signal.h tests for various standards fail anyway because of
other problems in the header. This patch fixes the incorrect
expectations and removes the two XFAILs that this fixes.
Tested for x86_64 and x86.
* conform/data/signal.h-data (union sigval): Expect also if
[XOPEN2K].
(struct sigevent): Likewise.
(SIGEV_NONE): Likewise.
(SIGEV_SIGNAL): Likewise.
(SIGEV_THREAD): Likewise.
(SIGRTMIN): Likewise.
(SIGRTMAX): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/aio.h/conform): Remove
variable.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
|
|
langinfo.h declares nl_langinfo_l if __USE_XOPEN2K. But this function
was new in the 2008 edition of POSIX. This patch fixes the condition
accordingly.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19996]
* locale/langinfo.h (nl_langinfo_l): Declare if [__USE_XOPEN2K8],
not [__USE_XOPEN2K].
* conform/Makefile (test-xfail-XOPEN2K/langinfo.h/conform): Remove
variable.
|
|
The conform/ test expectations for stdarg.h were wrongly missing an
expectation of va_copy for XOPEN2K (based on C99, so including that
macro). This patch fixes this.
Tested for x86_64 and x86.
* conform/data/stdarg.h-data [XOPEN2K] (va_copy): Require macro.
* conform/Makefile (test-xfail-XOPEN2K/stdarg.h/conform): Remove
variable.
|
|
The header conformance test for stdio.h for XOPEN2K fails because the
header does not define the off_t type, used in the expected
declarations for fseeko and ftello.
The absence of this type is not actually strictly a bug (hence no bug
report being filed in Bugzilla), since POSIX didn't require the type
to be declared in this header until the 2008 edition. However, the
glibc convention in such cases - where the type falls under the
general *_t POSIX reservation, and so it's OK to define it for all
POSIX versions - is to make the headers self-contained in this regard
even for the older POSIX versions not requiring the type to be defined
despite including other declarations depending on the type. Thus,
this patch adjusts the condition in the header and removes the XFAIL
(rather than adapting the expectation to work when the functions are
declared using __off_t without off_t being defined).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* libio/stdio.h (off_t): Define if [__USE_XOPEN2K], not
[__USE_XOPEN2K8].
[__USE_LARGEFILE64] (off64_t): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/stdio.h/conform): Remove
variable.
|
|
stdio.h declares cuserid if __USE_XOPEN. But this was removed in the
2001 edition of POSIX.
The #endif comment "Use X/Open, but not issue 6." reflects the correct
logic, but does not correspond to the #ifdef. The use of a correct
libc-hacker. The online archives for libc-hacker in August 2000 are
broken, but the messages can be found in the qmail archives in
/sourceware1/qmail/lists-sourceware/libc-hacker/archive/26 if you have
shell access to sourceware.
The issue showed up in August 2000 because of a warning about a
non-prototype definition in sysdeps/posix/cuserid.c when there was no
previous prototype declaration. Since we've now eliminated
non-prototype function definitions, that issue does not apply. The
other points from that discussion were about whether it should be
included in _GNU_SOURCE; whether _GNU_SOURCE should include
"everything"; whether deprecated interfaces such as this should be
excluded from it; and whether, even given exclusion of deprecated
interfaces, it should apply for deprecations in a version of POSIX
that at that time had not been released.
This patch follows the more conservative approach to a fix of keeping
the interface in _GNU_SOURCE. That matches how L_cuserid is handled.
I think there is a strong case for eliminating this interface from
_GNU_SOURCE (but this may not automatically be the case for every
interface removed in newer POSIX versions), but then L_cuserid should
also be removed from _GNU_SOURCE (in stdio-common/stdio_lim.h.in) at
the same time.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19989]
* libio/stdio.h (cuserid): Do not declare if
[__USE_XOPEN2K && !__USE_GNU].
* conform/Makefile (test-xfail-XOPEN2K8/stdio.h/conform): Remove
variable.
|
|
bits/xopen_lim.h (included by limits.h if __USE_XOPEN) defines
NL_NMAX, but this constant was removed in the 2008 edition of POSIX so
should not be defined in that case. This patch duly disables that
define for __USE_XOPEN2K8. It remains enabled for __USE_GNU to avoid
affecting sysconf (_SC_NL_NMAX), the implementation of which uses
"#ifdef NL_NMAX".
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #19929]
* include/bits/xopen_lim.h (NL_NMAX): Do not define if
[__USE_XOPEN2K8 && !__USE_GNU].
* conform/Makefile (test-xfail-XOPEN2K8/limits.h/conform): Remove
variable.
|
|
bits/termios.h (various versions under sysdeps/unix/sysv/linux)
defines XCASE if defined __USE_MISC || defined __USE_XOPEN. This
macro was removed in the 2001 edition of POSIX, and is not otherwise
reserved, so should not be defined for 2001 and later versions of
POSIX. This patch fixes the conditions accordingly (leaving the macro
defined for __USE_MISC, so still in the default namespace).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19925]
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (XCASE): Do not
define if [!__USE_MISC && __USE_XOPEN2K].
* sysdeps/unix/sysv/linux/bits/termios.h (XCASE): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h (XCASE): Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h (XCASE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h (XCASE): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/termios.h/conform): Remove
variable.
(test-xfail-XOPEN2K8/termios.h/conform): Likewise.
|
|
|
|
Now that GCC 4.7 or later is required to build glibc, this patch
removes three conform/ test XFAILs that related to missing C11 support
in GCC 4.6.
Tested for x86_64 and x86 (conform/ tests).
* conform/Makefile (test-xfail-ISO11/complex.h/conform): Remove
variable.
(test-xfail-ISO11/stdalign.h/conform): Likewise.
(test-xfail-ISO11/stdnoreturn.h/conform): Likewise.
|
|
math.h incorrectly declares various functions for XSI POSIX 2001 and
2008 editions. gamma was removed in the 2001 edition but is still
declared, along with gammaf and gammal which were never standard
functions. isnan is still declared as a function, along with isnanf
and isnanl which were never standard functions, although in 2001 the
function was replaced by the type-generic macro. scalbf and scalbl
are declared although never standard, and scalb was removed in the
2008 edition but is still declared. The scalb type-generic macro in
tgmath.h shouldn't be present for any POSIX version, since POSIX never
had such a type-generic macro.
This patch disables all those declarations in the relevant cases (as a
minimal fix, it leaves them enabled for __USE_MISC). For the matter
of declaring scalb but not scalbf or scalbl for the 2001 edition, a
new macro __MATH_DECLARING_DOUBLE is added, defined by math.h around
includes of bits/mathcalls.h, for bits/mathcalls.h to use to test
which type's functions are being declared.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18967]
* math/math.h (__MATH_DECLARING_DOUBLE): New macro. Define and
undefine around includes of <bits/mathcalls.h>.
* math/bits/mathcalls.h [!__USE_MISC && __USE_XOPEN2K] (isnan): Do
not declare function.
[!__USE_MISC && __USE_XOPEN2K] (gamma): Likewise.
[!__USE_MISC && (!__MATH_DECLARING_DOUBLE || __USE_XOPEN2K8)]
(scalb): Likewise.
* math/tgmath.h [!__USE_MISC && __USE_XOPEN_EXTENDED] (scalb): Do
not define macro.
* conform/Makefile (test-xfail-XOPEN2K/math.h/conform): Remove
variable.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
|
|
conformtest expected pselect for XOPEN2K and POSIX2008 (correctly),
but not for XOPEN2K8 (wrongly). This patch fixes the data to expect
it for XOPEN2K8 as well.
(As for all such fixes based on failures seen from the tests, there is
no guarantee that the data is fully correct for a particular standard
after the fix; headers and data may well have matching bugs. So far
I've only reviewed ISO, ISO99, ISO11 and POSIX data in detail, though
I hope eventually to review the others.)
Tested for x86_64 and x86.
* conform/data/sys/select.h-data [XOPEN2K8] (pselect): Expect.
* conform/Makefile (test-xfail-XOPEN2K8/sys/select.h/conform):
Remove variable.
(test-xfail-XOPEN2K8/sys/time.h/conform): Likewise.
(test-xfail-XOPEN2K8/utmpx.h/conform).
|
|
Various conformtest tests fail because of known issues, filed in
Bugzilla, that are hard to fix (requiring new features, kernel
cooperation or involving changing types in ways that may involve care
around padding when interfacing to the kernel). Such an issue has the
effect of making the whole test for the (standard, header) pair fail,
so hiding any other issues with that header for that standard
(possibly regressions or architecture-specific issues).
This patch adds a mechanism for individual conformtest test
expectations to start with xfail-, meaning that a failure of that
particular assertion does not cause the whole test to fail at the
makefile level and so failure at the makefile level can be used to
detect other issues that are likely to be easier to fix. This is
similar to the whitelisted symbols in the linknamespace tests, or the
marking of particular libm tests as allowing spurious or missing
exceptions, for example. The bugs filed in Bugzilla should still be
fixed, and the xfail- markers removed at that point, but xfail-
renders the tests more useful until that happens.
Note that there is no way to add such a marker for the assertion that
a header uses only symbols in the namespace of symbols it's meant to
use. I don't think there's any need for a way to xfail those
namespace tests other than xfailing the whole (standard, header) pair
at the makefile level, since they are generally straightforward to fix
(add appropriate conditionals on the problem definitions).
The xfails in this patch do not necessarily cover all cases of
hard-to-fix header bugs filed in Bugzilla that currently show up in
conformtest failures; there may be more yet to add for existing open
bugs.
Tested for x86_64 and x86.
* conform/conformtest.pl ($xerrors): New variable.
(note_error): New function.
(compiletest): New argument $xfail. Use not_error.
(runtest): Likewise.
(top level): Handle xfail- lines. Update calls to compiletest and
runtest. Handle xfail- and optional- in headers listed with
allow-header.
* conform/data/fcntl.h-data (O_TTY_INIT): Use xfail-.
(O_EXEC): Likewise.
(O_SEARCH): Likewise.
* conform/data/stropts.h-data (ioctl): Likewise.
* conform/data/sys/ipc.h-data (ipc_perm.mode): Likewise.
* conform/data/sys/sem.h-data (semid_ds.sem_nsems): Likewise.
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Likewise.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* conform/data/utmpx.h-data (utmpx.ut_tv): Likewise.
* conform/Makefile (test-xfail-XPG3/sys/ipc.h/conform): Remove
variable.
(test-xfail-XPG3/sys/sem.h/conform): Likewise.
(test-xfail-XPG4/stropts.h/conform): Likewise.
(test-xfail-XPG4/sys/ipc.h/conform): Likewise.
(test-xfail-XPG4/sys/sem.h/conform): Likewise.
(test-xfail-XPG4/sys/socket.h/conform): Likewise.
(test-xfail-UNIX98/stropts.h/conform): Likewise.
(test-xfail-UNIX98/sys/ipc.h/conform): Likewise.
(test-xfail-UNIX98/sys/sem.h/conform): Likewise.
(test-xfail-UNIX98/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/socket.h/conform): Likewise.
(test-xfail-XOPEN2K/utmpx.h/conform): Likewise.
(test-xfail-POSIX2008/fcntl.h/conform): Likewise.
(test-xfail-POSIX2008/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K8/fcntl.h/conform): Likewise.
(test-xfail-XOPEN2K8/stropts.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/ipc.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/sem.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/socket.h/conform): Likewise.
|
|
Ten conformtest failures arise from the internal header
include/bits/ipc.h failing to condition internal declarations, outside
the public namespace of headers including bits/ipc.h, on [!_ISOMAC].
As discussed in
<https://sourceware.org/ml/libc-alpha/2015-06/msg00653.html>, the
internal declarations that are actually relevant are in ipc_priv.h and
so include/bits/ipc.h should not be needed at all; this patch removes
it. (Ten further conformtest failures for other headers including
bits/ipc.h remain because of other conformance issues in those
headers.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* include/bits/ipc.h: Remove file.
* conform/Makefile (test-xfail-XPG3/sys/msg.h/conform): Remove
variable.
(test-xfail-XPG3/sys/shm.h/conform): Likewise.
(test-xfail-XPG4/sys/msg.h/conform): Likewise.
(test-xfail-XPG4/sys/shm.h/conform): Likewise.
(test-xfail-UNIX98/sys/msg.h/conform): Likewise.
(test-xfail-UNIX98/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/shm.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/msg.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/shm.h/conform): Likewise.
|
|
sysdeps/unix/sysv/linux/bits/in.h (as included in netinet/in.h, and
via that in netdb.h and arpa/inet.h) defines a series of MCAST_*
macros, both under __USE_MISC and then again unconditionally. These
are not POSIX macros, nor in any of the namespaces listed in POSIX as
reserved for this header, so should not be defined unconditionally.
This patch duly removes the unconditional definitions, leaving the
ones conditional on __USE_MISC.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18558]
* sysdeps/unix/sysv/linux/bits/in.h (MCAST_JOIN_GROUP): Remove
unconditional definition.
(MCAST_BLOCK_SOURCE): Likewise.
(MCAST_UNBLOCK_SOURCE): Likewise.
(MCAST_LEAVE_GROUP): Likewise.
(MCAST_JOIN_SOURCE_GROUP): Likewise.
(MCAST_LEAVE_SOURCE_GROUP): Likewise.
(MCAST_MSFILTER): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/arpa/inet.h/conform):
Remove variable.
(test-xfail-XOPEN2K/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K8/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise.
|
|
nice (XPG3) calls getpriority and setpriority (in XPG4 but not XPG3,
i.e. UX-shaded in XPG4). This patch fixes this by making those
functions into weak aliases of __* functions and calling the __*
versions as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by this patch).
This completes cleaning up the unsorted linknamespace test XFAILs.
[BZ #18553]
* resource/getpriority.c (getpriority): Rename to __getpriority
and define as weak alias of __getpriority.
* resource/setpriority.c (setpriority): Rename to __setpriority
and define as weak alias of __setpriority.
* sysdeps/mach/hurd/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* sysdeps/mach/hurd/setpriority.c (setpriority): Rename to
__setpriority and define as weak alias of __setpriority.
* sysdeps/unix/syscalls.list (getpriority): Use __getpriority as
strong name.
(setpriority): Use __setpriority as strong name.
* sysdeps/unix/sysv/linux/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* include/sys/resource.h (__getpriority): Declare. Use
libc_hidden_proto.
(__setpriority): Likewise.
(getpriority): Don't use libc_hidden_proto.
(setpriority): Likewise.
* sysdeps/posix/nice.c (nice): Call __getpriority instead of
getpriority. Call __setpriority instead of setpriority.
* conform/Makefile (test-xfail-XPG3/unistd.h/linknamespace):
Remove variable.
|
|
ttyslot (XPG4) calls the non-XPG4 functions endttyent, getttyent and
setttyent, which in turn bring in references to fgets_unlocked and
getttynam. This patch fixes this by making these functions into weak
aliases and calling the __* names as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18547]
* misc/getttyent.c (getttynam): Rename to __getttynam and define
as weak alias of __getttynam. Use prototype function definition.
Call __setttyent, __getttyent and __endttyent instead of
setttyent, getttyent and endttyent.
(getttyent): Rename to __getttyent and define as weak alias of
__getttyent. Call __setttyent instead of setttyent. Call
__fgets_unlocked instead of fgets_unlocked.
(setttyent): Rename to __setttyent and define as weak alias of
__setttyent.
(endttyent): Rename to __endttyent and define as weak alias of
__endttyent.
* include/ttyent.h (__getttyent): Declare. Use libc_hidden_proto.
(__setttyent): Likewise.
(__endttyent): Likewise.
(getttyent): Don't use libc_hidden_proto.
(setttyent): Likewise.
(endttyent): Likewise.
* misc/ttyslot.c (ttyslot): Call __setttyent, __getttyent and
__endttyent instead of setttyent, getttyent and endttyent.
* conform/Makefile (test-xfail-XPG4/unistd.h/linknamespace):
Remove variable.
|
|
mq_notify (in the 1996 edition of POSIX) brings in references to recv
and socket (not in POSIX until the 2001 edition). This patch fixes
this by using __recv and __socket, exporting them from libc at version
GLIBC_PRIVATE.
Tested for x86_64 and x86 (testsuite and comparison of installed
stripped shared libraries; PLT / dynamic symbol table changes render
the comparison not particularly useful for libc).
[BZ #18546]
* socket/recv.c (__recv): Use libc_hidden_def.
* socket/socket.c (__socket): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/socket.c (__socket): Likewise.
* sysdeps/unix/sysv/linux/generic/recv.c (__recv): Likewise.
* sysdeps/unix/sysv/linux/recv.c (__recv): Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/socket.c (__socket): Use
libc_hidden_def.
* sysdeps/unix/sysv/linux/x86_64/recv.c (__recv): Use
libc_hidden_weak.
* include/sys/socket.h (__socket): Do not use attribute_hidden.
Use libc_hidden_proto.
(__recv): Likewise.
* socket/Versions (libc): Export __recv and __socket at version
GLIBC_PRIVATE.
* sysdeps/unix/sysv/linux/mq_notify.c (helper_thread): Call __recv
instead of recv.
(init_mq_netlink): Call __socket instead of socket.
* conform/Makefile (test-xfail-POSIX/mqueue.h/linknamespace):
Remove variable.
|
|
mq_receive calls mq_timedreceive, and mq_send calls mq_timedsend. But
mq_receive and mq_send were in POSIX by 1996, while mq_timed* were
added in the 2001 edition of POSIX. This patch fixes this by making
mq_timed* into weak aliases for __mq_timed* and calling the
__mq_timed* names.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18545]
* rt/mq_timedreceive.c (mq_timedreceive): Rename to
__mq_timedreceive and define as alias of __mq_timedreceive. Use
hidden_weak.
* rt/mq_timedsend.c (mq_timedsend): Rename to __mq_timedsend and
define as alias of __mq_timedsend. Use hidden_weak.
* sysdeps/unix/sysv/linux/syscalls.list (mq_timedsend): Use
__mq_timedsend as strong name.
(mq_timedreceive): Use __mq_timedreceive as strong name.
* include/mqueue.h (__mq_timedsend): Declare. Use hidden_proto.
(__mq_timedreceive): Likewise.
* sysdeps/unix/sysv/linux/mq_receive.c (mq_receive): Call
__mq_timedreceive instead of mq_timedreceive.
* sysdeps/unix/sysv/linux/mq_send.c (mq_send): Call __mq_timedsend
instead of mq_timedsend.
* conform/Makefile (test-xfail-UNIX98/mqueue.h/linknamespace):
Remove variable.
|
|
swscanf (added in C90 Amendment 1, present in UNIX98) calls vswscanf
(added in C99, not in C90 Amendment 1 or UNIX98). This patch fixes
this by using __vswscanf instead and making vswscanf into a weak
alias.
(I intend to add conform/ test support for C90 Amendment 1 - and
various other standard versions supported by glibc but not yet by
conform/ tests - at some point, once the results for currently tested
standards are cleaner.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18542]
* libio/iovswscanf.c (__vswscanf): Use libc_hidden_def.
(vswscanf): Use ldbl_weak_alias instead of ldbl_strong_alias
* include/wchar.h (__vswscanf): Declare. Use libc_hidden_proto.
* libio/swscanf.c (__swscanf): Call __vswscanf instead of
vswscanf.
* conform/Makefile (test-xfail-UNIX98/wchar.h/linknamespace):
Remove variable.
|
|
The getpass function (XPG3 / XPG4 / UNIX98) calls fflush_unlocked (not
in any of those standards). This patch fixes this by making
fflush_unlocked into a weak alias for __fflush_unlocked and calling
__fflush_unlocked from getpass.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18540]
* libio/iofflush.c [!_IO_MTSAFE_IO] (__fflush_unlocked): Define as
strong alias of _IO_fflush. Use libc_hidden_def.
* libio/iofflush_u.c (fflush_unlocked): Rename to
__fflush_unlocked and define as weak alias of __fflush_unlocked.
Use libc_hidden_weak.
* include/stdio.h (__fflush_unlocked): Declare. Use
libc_hidden_proto.
* misc/getpass.c (getpass): Call __fflush_unlocked instead of
fflush_unlocked.
* conform/Makefile (test-xfail-UNIX98/unistd.h/linknamespace):
Remove variable.
|
|
Use of fmtmsg (XSI POSIX) brings in addseverity (non-POSIX). This
patch fixes this by making addseverity into a weak alias for
__addseverity.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18539]
* stdlib/fmtmsg.c (addseverity): Rename to __addseverity and
define as weak alias of __addseverity.
* conform/Makefile (test-xfail-XPG4/fmtmsg.h/linknamespace):
Remove variable.
(test-xfail-UNIX98/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/fmtmsg.h/linknamespace): Likewise.
|
|
The sem_* functions bring in references to tdelete, tfind, tsearch and
twalk. But the t* functions are XSI-shaded, while sem_* aren't. This
patch fixes this by using __t* instead, exporting those functions from
libc at version GLIBC_PRIVATE (since sem_* are in libpthread) and
using libc_hidden_* for the benefit of calls within libc.
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed stripped shared libraries). libpthread gets changes from
PLT reordering; addresses in libc change because of PLT / dynamic
symbol table changes.
[BZ #18536]
* misc/tsearch.c (__tsearch): Use libc_hidden_def.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* misc/Versions (libc): Add __tdelete, __tfind, __tsearch and
__twalk to GLIBC_PRIVATE.
* include/search.h (__tsearch): Use libc_hidden_proto.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* nptl/sem_close.c (sem_close): Call __twalk instead of twalk.
Call __tdelete instead of tdelete.
* nptl/sem_open.c (check_add_mapping): Call __tfind instead of
tfind. Call __tsearch instead of tsearch.
* sysdeps/sparc/sparc32/sem_open.c (check_add_mapping): Likewise.
* conform/Makefile (test-xfail-POSIX/semaphore.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/semaphore.h/linknamespace): Likewise.
|